I'm 64, when I was 12 I was helping my brother-law rebuild a flathead for his '49 Mercury hot rod coupe. I had helped my dad several times so I was handing him tools etc. and I realized he hadn't tightened or torqued one of those upper water pump bolts. I pointed that out to him cause I was doing the checklist that he had given me to mark off completes. He told me I was stupid and sent me away and finished it himself. The next day after school I was there when he was firing it up, I noticed a puddle on the floor but kept my stupid mouth shut. He cranked it into life, 1st try and began to wrap the throttle up pretty high when we noticed a shower coming from the top of the aforementioned pump. He and I made eye contact as he shut it down. He announced to me since I was so bright that maybe I could fix it and he left the shop. So I tore it down, tightened up the bolt and replaced everything properly and fired it up... 45 minutes tops. I left it idling and went to find him. He was smiling when I walked up as he heard it start. He handed me a $10 dollar bill and said thanks. I think I grew about 3 inches that day.

@Jesse-B

3 жыл бұрын

My old man was a ww2 vet, he was hard no doubt, but when you did good he always made you feel 10 foot tall. I never realised what a good father he was until he passed.

@oficinadeopalas.42

8 ай бұрын

Que memória boa.

@normsweet1710

7 ай бұрын

Only 3 inch’s ? 😉🙂

When you've got a million dollar shop, reliable, experienced help plus background people in the parts network and, a detailed working knowledge of what you're doing along with plenty of money, this kind of an engine rebuild seems like a lot of easy fun, and it is to them, but try it yourself sometime and find out what an incredible, involved, enormous task it can be. It's the hardest way to have fun there ever was.

Pretty good info, with a few exceptions. Having done these motors for years, a few responses just to clarify a few points: The water pumps have 'inlets' not outlets. The outlets are at the cylinder heads. The head bolts are strategically located around the cylinder/combustion perimeters specifically to seal the head/gasket/block combustion chambers via the engineered clamping force. The cast iron heads are not 'warped' unless the engine has been severely over heated. If they are, the last thing you want to do is 'flatten' them though the use of the head bolts. They need to be surfaced, or tossed into the recycle bin. Surfacing will always leave some of the head's chambers different sizes, so be aware. Over-heating was pretty common with old flathead Fords due to lack of cooling system maintenance. The original timing gear was made of phenolic fiber. The use of a quality aluminum t/gear is recommended for durability, and will not 'hum like a son-of-a-gun'. They run pretty quietly. In this case, the dirty interior is from years of early use of non-detergent oils, not necessarily infrequent changes. The block intake surface is very stable, and wants/needs NO sealant- just a quality gasket. Sealant only makes removing the intake much more difficult in future. Use NO sealants on cork gaskets as it will tend to make them crush, split and 'squirt out' from between the parts when torquing the fasteners. Bead blasting the pan interior is NOT recommended due to the difficulty in fully removing the media from joints between the baffles, etc. even when hot-water/soap washed and cleaned. Having this glass material work loose from engine vibration and hot oil after assembly is not what you want circulating in your oil, for obvious reasons. One other thing to mention if you're using bolts to attach the exhaust manifolds/headers: Be absolutely certain the lower front and rear bolts are not too long. If so, they will bottom out against the cylinder wall, and when tightened it will definitely ruin your day! Just some observations from a grey-bearded flathead guy.

@shawntatro8681

2 жыл бұрын

Clearly you know your stuff!! My brother and I inherited my dad’s 51 Woodie driver. We’ve been having a bugger of a time with stuck valves. My brother finally pulled the intake to try and free them up. Internals look very clean. What would make the valves (4) stick? I’d love to get it refreshed, but I’m not that confident in my work. Do you know anyone in Massachusetts you’d rfeccommend??

I really enjoyed this. About 1965 my dad had a '37 ford flatbed that died. I asked him if I could have it and he said if you can get it running it's yours. I think I had the engine out that night... First engine first love it is hard to tell the difference. I wish I had your tools. Mine was done on the back of the flat bed talking with the mechanic next door. I was about 14. when we got it running I could only keep it running when I drove in reverse. Finally figured out the carb problem and drove it to school. It was a wreck...but it was my wreck. psg

@FalconXE302

5 жыл бұрын

There also nothing like "your first wreck" as well... well done man... great memory.

@emsnewssupkis6453

5 жыл бұрын

@@FalconXE302 My 1960's wreck was a '55 Chevy panel truck which I turned into my 'dorm room' when in school in California in 1968. Pulled and totally rebuilt the engine, it ran really great, was stolen, driven off a small cliff, got it back covered with dents, drove it for three more years. (I am a female) it was a great 'go run off on whim' home vehicle. Had a swivvel chair on the passenger side, roof opening and a refrigerator and a sink between the driver and passenger. Lived there with my cat, George.

@sfbfriend

5 жыл бұрын

My reck was a 59 Ford Custom with a 332. Wish I still had it

@shakespeare_hall4788

4 жыл бұрын

@@emsnewssupkis6453 sounds like an amazing time you had with that car !..Oh and George !

@doughibbard8462

4 жыл бұрын

My wreck was a 59 f100 styleside with wrap around back window and a 292 y block. Drove it for many years. Even outlasted my first marriage. Now I have a 38 ford fordor deluxe. Can't beat the sound of a flathead or y block.

Thank you for this video. In 1949 when I started helping my father with the flat heads, our ring compressor was a Folgers coffee can and two hose clamps. Cylinder hone was on the end of a Sears and Roebuck electric drill. How that drill sparked. Now, after all these years rebuilding the 49, 50 and 51 motors (I am 75 years old, you do the math). I am glad to see someone still does them correctly. PS: With three Stromberg 97's and playing with a few in block items. This can be a very fast engine. Oh! Put a exhaust cross over and add two Smithy mufflers. What a wonderful sound. Again, my thanks for the video. captjack

@kennethjohnson8323

6 жыл бұрын

Jack Scurlock i

@Slithey7433

6 жыл бұрын

Jack Scurlock - I too am 75. And grew up loving the flathead. When I go to a show I’m less impressed by rods with later GM or Chrysler engines and gravitate to those with the flathead. I still have tools for side valve engines and might still have an ancient ring compressor somewhere. What we didn’t have in those days were all of the shop equipment that’s available today.

@joeiler3718

6 жыл бұрын

Jack Scurloc

@williamberry509

5 жыл бұрын

Some where in my past my dad said to use 2 inch copper for exhaust pipe. He said it sounded so much better. I think he might b have done that a time or two with a flat head. It's 2018 and I'm 60 and I never had a chance to work on one of these.

@tomnekuda925

5 жыл бұрын

With a bit of boring, stroking, porting, relieving, and milling the heads (or getting "Denver" heads or Navarros) + decent free-flowing headers, the cross-over, and good exhaust flow.....these were pretty good in their day. The hot set-up behind one was Lincoln Zephyr gears (higher quality), a Hurst Mystery shifter, and a steeper rear-end. Guess I'm showing my age here. They were the Chevy small-block of the day. Also available were 2- and 3-carb intakes for Strombergs or early Holleys. Henry Ford used to bury the blocks in the sand by the river and let the cylinders get a bit of rust in them prior to final honing......it made the block really last due to increased hardness and micro-pitting (that retained oil well).....made the blocks seem to last forever. The sound of a flathead coming on the cam was glorious and very distinctive.

That was fantastic, too cool. The narrative really made it.

I rebuilt a 1953 Ford flathead in 1972. Lot of fun, and a great learning experience.

I am not a mechanic but when I was a kid, I my older brothers used to fix old Chevy engines. Fixing this engineers that you guys do, it brings me some of the most memorable moments in my life.

Nice to see someone give some love to an old flat head.

@jimjardine4705

6 жыл бұрын

You must be joking!!

@charlesm.9858

4 жыл бұрын

My pops 48 flat heads was smoking all the big block V8’s down the track in the early 60’s I believe and he had racing parts on it that took his car to 90 in the first gear!!

@richardanderson5109

4 жыл бұрын

@@mrx196 Yeah,if you left water in 'em in winter,otherwise,,,,,,,,,,no.

David did a excellent job rebuilding THAT 1932 Ford flat head V8 engine .i could not have did no better myself AND I have been revealing engines + Transmissions plus alternators +starters + generators for over 60 years

Re some comments on here- 3 main bearing Engine all needed for low rev, 4th ring was oil ring below pin, engine only 85 hp, or 100 hp on Mercury. One of the main design flaws with Ford Flathead is that exhaust port passes through water jackets which can cause overheat at higher rpm, used 2 water pumps as did better designed L-heads like Cadillac but Cadillac had exhaust out top of Engine into a porcelainized manifold back to where it attached to exhaust pipe. ASE Master Engine Machinist 42 years here,retired. y'all are doing people a big service putting what you are going through here on this engine. Trust me people with neg comments, this is way more involved than they could go into here! On the valve adjust- you at least had "Johnson Lifters", I have done the older where the stem had to be ground, inserted, checked, until proper clearance was obtained, a real time consuming job in itself! Good job guys! BTW- first Ford LHeads had "full floating rod bearings, with two shells with both rods on those two shells, clearance in rod and on crank. Some of these early engines were/ are amazing and you need tools that can be challenging to find to rebuild them(valve guide puller in this instance) Again good Job, I enjoyed!

@tomnekuda925

5 жыл бұрын

Really good info.....learned quite a bit....thanks. tn

@tarquineous

5 жыл бұрын

I was thinking of reversing flow if I ever rebuild one. I'll have to look into the Cadillac engine you mentioned. Thank you.

What a pleasure to see these engines and how they make repairs in my boyhood era, help my father repair the engine to his Ford F600 1953 truck What memories

My mate use to tinker with these motors many years ago. I reckon they still the greatest v8. Thanks Henry Ford

Great video, held my attention through the whole rebuild and how did you guys know this video would put us old time flathead owners in 7th Heaven? 1949 Ford 2-door sedan with a flathead 6 that I could work on with my eyes closed was my first car ever. $10 in 1958 when I was 14...The time lapse concept with clear explanatory well timed voice over commentary was right on. Thank you guys for one of the best videos on KZread imo.

@ShelbyRestorations

3 жыл бұрын

cool! i plan to restore a flatty 8 for a 1950 merc.. so that maybe i could drive it into my current high school and show off

Flatheads are just fascinating. Thanks for the amazing content, guys!

My dad bought a '47, which is identical to the '46, in 1970. Paid $50 for it because it wouldn't run. He learned it wasn't getting gas so traced back to the petcock at the tank. There was a twig there worn tapered, serving as a needle valve. The previous owner offered $200 on the spot, but it wasn't for sale. He drove it 4 years without issue and that was my first stick. Did my first brake job, first repair on any vehicle, on that truck. I honed the slave cylinders and installed a kit in each and put new shoes in. I was only 10 so those return springs were bigger than my arms, but I did it with a large screwdriver for leverage. Dad was so patient. Just directed and watched me figure it out. Before '49, a dual-point distributor was on the front of the crankshaft. I got the job replacing the points because it was easy access for small hands and didn't even need to jack it up. Meantime my older brother changed the plugs. Then Dad tuned the carb and we put a tachometer on and played with it. All the flatheads inherently had low compression, but this one was still solid enough he could back the idle screw until it was idling at 200 RPM. Could hear each cylinder hit at that speed. Thanks for the memories!

I really enjoyed this. I had many flathead fords in the 50s and 60s (high school). I rebuild most of them. Still have my ring compressor, still have my piston ring grove CLEANER (couldnt afford NEW pistons). This was a class build. Now I am as old as that truck, so I only can enjoy WATCHING you do this. Thanks.

To people new to learning car mechanics like myself, this "breakdown" was an enormous help! Keep up the amazing videos :)

This is truly a labor of love. Keep up the good work and thanks so much for sharing this on video!

Even though I know about a lot of this stuff, it's great to see it again and to have it time-lapsed to see the process as a whole. Great commentary, too. Thanks!

Thank you guys for taking the time to produce this . Awesome

My grandpa has a 1953 mercury truck with one of these in er. Its one he restored with my uncle when he was a kid, and he tought me to drive it. The 3 in the tree.

@dennisschell5543

6 жыл бұрын

Three ON the tree... ;-)

@richardanderson5109

4 жыл бұрын

@@dennisschell5543 You get a gold star .

I enjoyed immensely, thank you. I'll never forget riding with a friend of mine back in "65". He had a 49 Ford with I guess a built flat head. I say this because I remember duces with Offenhouser heads. The sound of that engine at full throttle going who knows how fast is still music to my ears. We were young, dumb and full of no fear.....lol

Love flat head engines, they're so simple, they look really cool and they're so silky smooth.

As a teen in 1957 I rebuilt a 51 Ford flathead and put it in a 1929 International truck for a hot rod, about the most fun I ever had in my life :-)

I’m new to your channel and can’t get enough. I started watching about 12:00 this afternoon and it’s now 10:00 this evening. Makes me want to get back into Hot Rodding. Those days were some of best.

Nice I miss these older cars they always had lots of room to slide engines in and out and work on them

@briannotafan3368

5 жыл бұрын

i found 2 of these in tx for 150.00 in 1982 time to get of the pot i guess

My wife walked by as I was watching this and she stopped and asked why I was watching this because you're too old to be even thinking about fixing up old cars. When we were dating I had a 51 ford two door with a flat head. I built my own headers and was just learning to weld and all she remembers is when one of my welds would break open it meant no date that night because I was re-welding it. I finally learned how to weld redoing those headers. I loved this video and brought back many memories of me and my flat head.

Enjoyed the pleasant camaraderie explaining what was going on. Shared, positive and intelligent.

@richardanderson5109

4 жыл бұрын

Glen Miller That other guy didn't know a damn thing !!!!!

I am a ASE certified Master Auto Mechanic I have rebuilt thousands & thousands of Engines & Transmissions but THAT man is telling you exactly right about that flathead V8 engine he got everything 100% exactly right ABOUT THAT 1932 Ford flat head V8 engine he knows exactly what he's talking about I could not have did no better myself and I have been doing this for ogre 60 years myself .

I feel a strong sense of nostalgia watching this. A sort of window to a bygone era belonging to people who are no longer with us.

A beautiful rebuild. A tremendous effort professionally executed. Really enjoyed watching this video. Thanks a bunch!

In 1963 I bought a 37 Ford Standard (fastback) 2 door coach and I had a garage full of goodies to build a great flathead engine since by then the Chevy V8's were doing plenty of damage around the racetracks in the South. My dad had started stock car racing in 1947 when all the dust had settled from WWII, most of the early racers drove 39 Ford coupes. A few guy's drove Chevys and Plymouths but with Ford having the V8 the majority of drivers chose Ford. My brother and I had cut our teeth on flathead V8's and really got into this one. We started with a 59AB block bored 3&5/16's with a 4 inch stroke we had a Winfield 3/4 cam a set of Offenhauser 10 to 1 heads and a Edelbrock manifold for three carbs. Gasket sets were about all I had to buy. Once finished and tuned just right this flathead was about the meanest sounding engine I ever heard. Taking off full throttle was to much for the transmission and we ended up changing to a Lincoln Zephyr transmission. From a rolling start it would more than hold it's own against stock small block Chevy's. It was fun having a car built before my brother or myself were born. 1938 and 1941. By the way the Ford was slick with Lakewood Green from a 52 Mercury and black rolled and pleated interior. The interior was my only substantial expense as I did all the bodywork and painting. Fond memories!

very interesting rebuild! I'm a chevy guy but owned a few flat heads, first time i wvert seen one rebuilt.Great Job guys really enjoyed the share...

Simple is AWESOME! This video was amazing! I know nothing about cars and the way that you simplyfied all the technical part was fantastic, also the idea of person knowing nothing and asking questions is perfect ! Briliant ! Please make more !

@DodgyBrothersEngineering

6 жыл бұрын

The person asking the questions didn't not know anything (I'm sure they knew the answers to their own questions), it was scripted to sound that way for the benefit of viewer. People who know nothing typically don't ask on topic questions, question after question like that.

When I was fifteen, I overhauled my friend's '51 Mercury flathead engine. It was the first time that I had ever seen the inside of an engine. My next door neighbor worked at the Oldsmobile dealership and was a mechanic and body man. He loaned me a cylinder hone and a ring depressor and showed me how to lap the valves etc. I didn't know that there was such a thing as a torque wrench. When I tightened the rod bearings I would tighten them until I couldn't turn the crank with a wrench, then back off until I could. When I finished, that engine ran like a sewing machine until my friend wrecked it a couple of years later. I've never rebuilt another engine, but I'was proud of that old Flathead engine re-build.

@redbed1604

4 жыл бұрын

By the way, the engine was in the car, not on the bench. The work was done in the front yard!

@redbed1604

4 жыл бұрын

I didn't have any "lube" to put everything together, so I just used Vaseline! lol

Very well done and educational video. Please keep 'em coming.

You said fire ring with the head gasket there and it reminded me of the old detroit diesel 2 stroke head gaskets. A fire ring around each cylinder, o rings in each coolant port, and a sort of rope seal around the deck for the oil drain back. No single head gasket to be found. Definitely two of my favorite engines, the flathead ford and the 2 cycle detroit.

Love these and the wrench men keep them coming 👍

Incredibly well made video, all pro engine re-builders and machinists. What a wonderful job and a great truck, thank you.

Sweet guys sounds wicked. Love the rebuild videos.

@constancefisk8928

5 жыл бұрын

Joe Brown and

I own a 1968 amc javelin that’s completely restored. My grandson when 5 crawled into the car and took it out of park and rolled it down a hillside through a barbed wire fence and into a ditch. Hagerty took my claim and with no trouble at all and I mean NONE paid for the repairs to almost seventeen thousand dollars. Hagerty was so easy to do business with,that I’m still with them today. Great company . Thank you hagerty. And yes my grandson did make it to six. Barely. I still have the car and it still looks great. I owned a shop for forty years so I know this half hour was really mor like forty

I loved the video, would like to see more of you guy`s doing your own work on your project vehicles. thanks guy`s .

You kept the 6 volt system. Very original! I owned many ford flathead engines in my younger days. They served me well!

Thanks for this video. I was never introduced to the mechanical world as a kid, even though my Dad worked at Chevy's V8 engine plant in Flint, MI. His world was divided into the white collar and blue collar men. He wanted me to grow up white collar. Sad really. I find the engineering and mechanical skills shown in this video to be amazing. I wish I had known more about these things. It would have been nice to rebuild the flat-head in my 1953 Ford F100 truck I bought in college...a blue collar guy ended up with it. Poetic justice. I hope it's still on the road 45 years later!

Enjoyed this format. Great question and answer session. Thanks!

Beautiful! Quick build on an old school. V8 I love it! That's what built hot rotting right there 👍💪🇺🇸

Excellent! Good job... Sometimes you can surprise yourself . Doing things you thought you couldn't do... Next one will be easier!

The fire department in my hometown had a '46 Ford firetruck. It was an old truck then, but still ran like a champ. No matter how cold the weather, just a bump of the starter button was all it took to bring the old flathead to life. The original exhaust was long gone, so to save tax dollars, one of the volunteers installed a couple of cherry bombs with just enough pipe to get past the cab. That was the sexiest sounding firetruck I've ever heard. I'd love to have it now, but it's long gone.

Great rebuild, great video fellows. Thanks for sharing!

Loved watching this. I bought a 41 ford coupe in 1966 with a "built" 53 Merc in it. 3/4 race wolverine cam, Wiend aluminum heads, I believe Johns piston and a triple duece progressive setup with Mallory dual point dis and headers. Head a stiff new front spring and looked like a gasser. stock rear and tranny with a Hurst shifter. Could never restart her. Had to let her cool down so I had to plan my trips. It was alot of fun.

out of all the vid’s I have seen this is the best !

Such a great series, excellent video Guys!!

Super Trick Video and I enjoyed it very much as I had my share of Flat Head Motors back in the day. Kudos to all involved!!

Great production, and love the questions.

Thank you very much for posting this video. I just bought a 1952 Ford COE truck with a non-running flat head V8. The previous owner said that the truck was running and he drove it in a parade a couple years ago, but he tried to turn it over recently and nothing - he said he thinks its stuck. I just got it to my shop and haven't taken a close look yet. Wish me luck!

Awesome Production Guys , just found this Channel , i have never had any interest at all in watching Engines and Cars and Now i cant stop watching these , this video explanation is just Gold , learning and understanding how many Pieces it take to run an engine , its just Incredible , Thanks again

Great video, love the commentary/banter...kinda reminds me of the old "Mystery Science 3k theater"!

one of the best rebuilds I have seen ,,nice job and camera work,,, class!!!

Sound of a flat 8 still makes me smile!

Excellent video. Thanks for all the efforts you made to narrate this!

This was *awesome*! Thank you.

Very Nice + Great Rebuild! Thank You!

Great video, thanks guys keep them coming...Frank

Thanks, that was great and i loved the commentary too!

Great video. My first two cars, a 50 and a 53 Ford both had this engine - always wondered how it worked! Thanks.

"Oil is the balls", (when framing an answer to the description of the crank bearing) Inadvertent Awesome! (@11.10)

As a positive note, your camera man has a better comprehension of motor rebuilding than most shade tree mechanics...... Love the videos.....

I get chills every time he smiles at the camera during the first startup.

Fresh rebuild..first start up...it sounds like a old rotary aircraft engine...awesome

Very interesting time-lapse effects. Awesome video.

This is one awesome video just learned about the flat head that I did not know before like the valve timing no chains no belts for the age that was brilliant maybe not the most efficient intake outtake but keep the things simple always works, I have worked with machinery for 44 years built engines from little diesels to you name it. Huge Thank you for posting this !

@garyronan5568

6 жыл бұрын

If you like old flat head truck engine rebuilds check out the vid on youtube of Alaska Trucker "Studebaker US6 Frozen In Time (Engine Overhaul)"

This reminds me of Mystery Science Theatre the way you two are watching the screen.

@chrisnelson3564

3 жыл бұрын

I would be thrilled to have the MST guys do a parody of one of the builds!!! Or have them watch one of the cheesy '50s Hot Rod movies!

I enjoyed that. A 1950 Ford custom is what I learned to drive in. So I am familiar with that engine.

Excellent video, great presentation and very informative. Thanks.

Really liked this, especially for someone who enjoys watching but doesn’t always know what he’s seeing.

What a sweet sounding rebuilt engine.Good mechanical skills, sirs!

What a great Video! I enjoyed every second, thanks!

I thought this video commentary was terrific. Interesting to watch. Glad you offered this in addition to the video itself.

Very nice tutorial fellas. I like the way you have the one guy with a very basic engine knowledge, and the guy to answer his questions. I can see this VERY helpful to a beginner. Even the choice of the flathead is great for a beginner. I did not realize that they had the nylon gear for noise reduction that far back. Funny, now gear heads can choose "extra" noisy timing gears to simulate a supercharger sound or something.

Fascinating video, have rebuilt a few OHV V8,s but never touched a Flathead, thank you regards Doc Cox

Great video! Loved the time lapse/commentary style! Would have liked to hear it drive away though. Best flat head rebuild vid I ever saw.

Great job guys that flat head engine looks great

I had a '46 with an 8BA. Sold it to a friend. That was a fun truck. Nice video!

Neat stuff and well done. That is the best feeling.

Great video craftsmanship, and great master mechanic rebuild. Hagerty videos are the best!

When I was 6 to 10 years old my dad bought his cars from wrecking yards. He fixed them up and drove them till they broke down where he couldn't fix. I remember going on a vacation of Vakama,WA We were in a 1946 ford, the car started to backfire in the carburetor and lacked power. Will, he pulled off the road. Got his toolbox out of the trunk with parts. He had me turn over the engine listened to the engine. then he proceeded to pull the intake manifold, head on the driver's side. Had me turn over the engine. Took a hammer and knocked off the valve head. had me turn over the engine again pulled the valve out on the intake valve. Put another valve in had some valve turning compound and turned the valve to seat set the valve in. Put on a new head gasket put the head back on. replace the intake back on. Started the engine and away we went back on vacation. By the way, he always carried valve head gaskets, timing gear gaskets in the trunk. Also, he never had to worry about his tools from rusting as the was a puddle on oil in the bottom of his toolbox.

@bruceparks3124

4 жыл бұрын

Bob, I really respect your dad's mechanical abilities and his fearlessness. My own father was much the same way. I remember watching him rebuild motors without ever taking the engine out of the car. He'd just replace the bearings, install new rings, and grind the valves himself, and away we'd go.

Great session guys - fantastic way to review the build with the back and forth in front of the big screen. 👍

I really liked the cinematography fellas!

Just discovered this rebuild video on my Hagerty subscription. It was extremely enjoyable. Video quality was excellent - one thing missing from the comment section was the brilliant shot of the engine inside ,showing the cleaning process. It was interesting to note how long Edelbrock has been around.

Good build guys, enjoyed watching it.

I love the questions and answers

absolutely enjoyed it. Nice job Fella's

All you guys did a great job !

Very nice informative video. I’ve rebuilt several engines, but never a flathead Ford. It looks more simple even if it is tighter getting the valves out and back in.

I never knew the flat head ran gear to gear timing, which unlike a Pete Jackson style gear drive, results in the cam gear turning in the opposite directIon as the crank. As usual...Super Production!

Really nicely done. Very enjoyable segment.

My first vehicle as a teen had a flathed V-8 and my current vehicle is a V-8 only now it's a OHC V-8. Still driving Fords

Fascinating! Thank you.

I love how your video guy is like, "There's all kinds of goop." And you are like, "Yes, that is assembly lube."