Came out great , I use the same method for wrinkle coat . Heat gun always works. Another top tip is cut the wires off of an old set of plug wires and that way you don't paint around/in the holes .
@citiroccer Жыл бұрын
*PRO TIP* use chapstick on the letters before painting it will come off like butter with the scrape of razor blade. Valve cover looks great!
@raimondnu3
Жыл бұрын
Do you have a certain brand in mind that you use?
@citiroccer
Жыл бұрын
@@raimondnu3 anything wax based works well no particular brand
@raimondnu3
Жыл бұрын
@@citiroccer Thank you
@B33Major2 жыл бұрын
The hotter the part the better the wrinkles. Before I sprayed I baked it at 350 for 45 mins-1 hr. Spray it with a solid even coat. And repeated the bake process and it looks damn near as good as if Honda done it at the factory.
@AnDrEw1221002 жыл бұрын
Turned out awesome . Love the wrinkle finish .
@c2specmotoring2 жыл бұрын
Great info as always, my B16 VC will get the wrinkle blue VHT now that I know its available.
@dannylongstreth48682 жыл бұрын
Nothing more satisfying then putting a new wrinkle red valve cover on a Honda engine...
@bighomieJ5X2 жыл бұрын
Those lightbulbs are badass 💯👍🏾
@CaptainFalcon924 ай бұрын
I cannot believe the result you got. Mine I tried twice but the vht is so thin I runs like crazy. Despite trying super light coats it keeps tripping.
@ericg11492 жыл бұрын
I use the oven method and it works very well for me
@shiftlifegarage32842 жыл бұрын
Awesome work brother ❤❤👈👈🙏
@janvos43752 жыл бұрын
Looking nice mark. 💪🏻🇳🇱
@vision272 жыл бұрын
Even if it's not the darker Type R red it pops out really nice. Hopefully I can do the same to mine whenever I get to it 🔥🔥🔥
@crxseth
2 жыл бұрын
I'm wondering if there is a way to overlay a darker flat red paint while this paint is still wet, and get the darker red color? I kind of want to try it.
@joshuac5817 ай бұрын
Thanks man
@cdrrentals34582 жыл бұрын
Looks good
@CaptainTexas922 жыл бұрын
Just got some Resto Tuner goodies for my CR-V. Getting closer to being fully restored. Soon I’ll 5 Spd swap it just trying to decide if I go N/A with Trumpets or mild boost SC/Turbo. Excited to build the B20z
@GoldenEraHondaProduceGarage
2 жыл бұрын
What's up my Texas Rd1 brother, I'm in the DFW area and I'm a huge CRV fanatic I've got a fully built B20 VTEC 5-speed CRV and I've got another five-speed CRV that's about to get a G23 build, hopefully you're in the north Texas area I love meeting other Honda fans that appreciate the CRV gang gang😎🤙🤙
@CaptainTexas92
2 жыл бұрын
@@GoldenEraHondaProduceGarage East Houston area here.
@imedina6196 ай бұрын
nice job
@TheKotchie2 жыл бұрын
That looks cleeeeeeaaaaannnnn 😍
@keithroe33232 жыл бұрын
Looks clean, I just hate gsr valve cover with no H lol
@garageamsterdam Жыл бұрын
What dremel head did you use for sanding the DOHC VTEC letters
@JohnnyTY2 жыл бұрын
Looking nice👍👍👍
@noxgore54004 ай бұрын
What sand grip did you use
@Lastsight1002 жыл бұрын
She loookin cleaaaaaan!!
@connorcook3123 Жыл бұрын
i tried this with a d16 and it doesn’t work, when i try to paint it it combusts spontaneously, any tips?
@EpicFragz2 жыл бұрын
Yup spicy meatballs right there
@Rooster_B18C2 жыл бұрын
Legit 👌🏻 🚗💨💨💨
@chrispraz8772 жыл бұрын
Those headlights fit on ef's?
@Jasoneiland89 Жыл бұрын
Fresh fresh
@alomechanthasinh40792 жыл бұрын
🔥🔥🔥🔥🔥
@Toppdawghaulscars2 жыл бұрын
You did your thang with this one champ
@projecthikaribyrhg2 жыл бұрын
Hi Mark. Are these Headlights made in the US?
@raimondnu3
Жыл бұрын
No. They are JDM DA9 headlights. There are one piece oppose to the normal ones. -Made only in Japan
@mickl82122 жыл бұрын
Clean up all the areas you don't want paint on prior to painting. Then CAREFULLY cover those areas with a thin smear of grease. Then paint. When the paint is dry, gently scrape all the paint from the areas covered with grease.
@cal-ave2 жыл бұрын
Don’t look that great inside the bay but the paint came out perfect
@Keane-to-clean2 жыл бұрын
U never masked the gromet seals they will leak in time from the paint left on them
@AZMarine782 жыл бұрын
Looking wrinkly bro!
@peterthomas57922 ай бұрын
Nice, but should've taken a bit more time to hand-sand it.
Пікірлер: 47
Came out great , I use the same method for wrinkle coat . Heat gun always works. Another top tip is cut the wires off of an old set of plug wires and that way you don't paint around/in the holes .
*PRO TIP* use chapstick on the letters before painting it will come off like butter with the scrape of razor blade. Valve cover looks great!
@raimondnu3
Жыл бұрын
Do you have a certain brand in mind that you use?
@citiroccer
Жыл бұрын
@@raimondnu3 anything wax based works well no particular brand
@raimondnu3
Жыл бұрын
@@citiroccer Thank you
The hotter the part the better the wrinkles. Before I sprayed I baked it at 350 for 45 mins-1 hr. Spray it with a solid even coat. And repeated the bake process and it looks damn near as good as if Honda done it at the factory.
Turned out awesome . Love the wrinkle finish .
Great info as always, my B16 VC will get the wrinkle blue VHT now that I know its available.
Nothing more satisfying then putting a new wrinkle red valve cover on a Honda engine...
Those lightbulbs are badass 💯👍🏾
I cannot believe the result you got. Mine I tried twice but the vht is so thin I runs like crazy. Despite trying super light coats it keeps tripping.
I use the oven method and it works very well for me
Awesome work brother ❤❤👈👈🙏
Looking nice mark. 💪🏻🇳🇱
Even if it's not the darker Type R red it pops out really nice. Hopefully I can do the same to mine whenever I get to it 🔥🔥🔥
@crxseth
2 жыл бұрын
I'm wondering if there is a way to overlay a darker flat red paint while this paint is still wet, and get the darker red color? I kind of want to try it.
Thanks man
Looks good
Just got some Resto Tuner goodies for my CR-V. Getting closer to being fully restored. Soon I’ll 5 Spd swap it just trying to decide if I go N/A with Trumpets or mild boost SC/Turbo. Excited to build the B20z
@GoldenEraHondaProduceGarage
2 жыл бұрын
What's up my Texas Rd1 brother, I'm in the DFW area and I'm a huge CRV fanatic I've got a fully built B20 VTEC 5-speed CRV and I've got another five-speed CRV that's about to get a G23 build, hopefully you're in the north Texas area I love meeting other Honda fans that appreciate the CRV gang gang😎🤙🤙
@CaptainTexas92
2 жыл бұрын
@@GoldenEraHondaProduceGarage East Houston area here.
nice job
That looks cleeeeeeaaaaannnnn 😍
Looks clean, I just hate gsr valve cover with no H lol
What dremel head did you use for sanding the DOHC VTEC letters
Looking nice👍👍👍
What sand grip did you use
She loookin cleaaaaaan!!
i tried this with a d16 and it doesn’t work, when i try to paint it it combusts spontaneously, any tips?
Yup spicy meatballs right there
Legit 👌🏻 🚗💨💨💨
Those headlights fit on ef's?
Fresh fresh
🔥🔥🔥🔥🔥
You did your thang with this one champ
Hi Mark. Are these Headlights made in the US?
@raimondnu3
Жыл бұрын
No. They are JDM DA9 headlights. There are one piece oppose to the normal ones. -Made only in Japan
Clean up all the areas you don't want paint on prior to painting. Then CAREFULLY cover those areas with a thin smear of grease. Then paint. When the paint is dry, gently scrape all the paint from the areas covered with grease.
Don’t look that great inside the bay but the paint came out perfect
U never masked the gromet seals they will leak in time from the paint left on them
Looking wrinkly bro!
Nice, but should've taken a bit more time to hand-sand it.
Honda Wrinke In Time
Uno
Felpro gasket = 🗑
Looks good