Subscribed! Your video was the best on this tip! Thanks for sharing and saving me some aggravation!
@sendzebasil-lw1kz10 ай бұрын
Nice work I appreciate it
@argon805 Жыл бұрын
that is so good, Thank you!
@georgekounelis2723 Жыл бұрын
Thank you for sharing, exactly what I needed.
@TonyLoewen
Жыл бұрын
No problem
@2000shellback4 ай бұрын
Learned a lot - thanks. Can this be done on wood? Looking at wrapping some home speaker enclosures.
@randallsemrau69112 ай бұрын
I've found that if I am using a sheet large enough to cover a table the size of the table in your demo, the corner work actually becomes much more difficult.
@robrennie78386 ай бұрын
Thanks for showing this - apart from explaining it - also shows that just get some sample bits of wood and wrap and have a practice.
@EKWB5 ай бұрын
Exactly thee demonstration I was looking for, should not be able to wrap several PC water-cooling Radiators, thank you.
@garciavelaroberto2 ай бұрын
Subscribed! Very helpful video, Thanks. I have a question: what is the brand of the vinyl film?
@Ruthlessbone2 жыл бұрын
More wrap videos! 💯
@TonyLoewen
2 жыл бұрын
They are coming! Thanks for the support
@Lyander25 Жыл бұрын
This was useful, thanks! Considering wrapping a mech keyboard for a client and then finishing with a lacquer-- never really worked with 2080 before, would it take a spray finish well?
@TangerineTypes
Жыл бұрын
Did you end up doing it?
@Lyander25
Жыл бұрын
@@TangerineTypes not yet. I'm happy keeping my keyboard stock and the guy who was gonna pay me to do it kinda vanished haha
@erc.erc.erc.4 ай бұрын
I've got a decorated wooden column, think a fluted column at the end of a stair railing. Can I vinyl wrap that? The goal is to avoid painting but provide a fresh coat of paint gloss for an art project. Only needs to last a month.
@goinginsane37098 Жыл бұрын
That corner was kind of rounded. Can you show a sharp corner? I’m worried my paper is going to pierce when I heat and stretch it.
@glasscannon4723
Жыл бұрын
Im no vinyl pro but I would recommend the shrink into place method where while cold u shape it a little bit over the edge and shrink it by heating it a little bit until it stick on the corner but not too hot to where it will pierce through it when it shrinks
@koreanmister3d Жыл бұрын
very nice work. do you think it is possible to wrap 3d printed stuff?
@thatnutguy5545
Жыл бұрын
it is possible it just takes a lot of patience
@andrewalberti91219 ай бұрын
Thank you
@MikeKleinsteuber10 ай бұрын
Doing this demo with gloss black doesn't really help with the lighting
@WGTM4133Күн бұрын
I dont suppose a hair dryer would do?
@mrj3217 Жыл бұрын
So I need a heat gun? Will a hair work I am just wrapping a button box
@TonyLoewen
Жыл бұрын
Hair dryer can work just takes a little longer.
@sendzebasil-lw1kz10 ай бұрын
How can I get this wood sticker paper in Cameroon
@DrGeta666
7 ай бұрын
it's not "wood sticker paper" it's vinyl wrap. same as for cars. 3M 2080.
@kblongespee92252 ай бұрын
Wrapping granite in vinyl 😵💫
@tlbeedy
2 ай бұрын
That granite was HIDEOUS. I’d much rather look at the vinyl 🤣
@simianwarthog Жыл бұрын
You skipped the detail of cutting with a knife! Everything else is easy! Somehow, you glide the knife in a straight line, but when I try it the blade wanders. WTF are you using to guide the blade??? Details please mister!
@AutomotiveRestyle
Ай бұрын
Years of practice. You cannot fake knife and squeegee skills
Пікірлер: 32
Excellent! ❤
Subscribed! Your video was the best on this tip! Thanks for sharing and saving me some aggravation!
Nice work I appreciate it
that is so good, Thank you!
Thank you for sharing, exactly what I needed.
@TonyLoewen
Жыл бұрын
No problem
Learned a lot - thanks. Can this be done on wood? Looking at wrapping some home speaker enclosures.
I've found that if I am using a sheet large enough to cover a table the size of the table in your demo, the corner work actually becomes much more difficult.
Thanks for showing this - apart from explaining it - also shows that just get some sample bits of wood and wrap and have a practice.
Exactly thee demonstration I was looking for, should not be able to wrap several PC water-cooling Radiators, thank you.
Subscribed! Very helpful video, Thanks. I have a question: what is the brand of the vinyl film?
More wrap videos! 💯
@TonyLoewen
2 жыл бұрын
They are coming! Thanks for the support
This was useful, thanks! Considering wrapping a mech keyboard for a client and then finishing with a lacquer-- never really worked with 2080 before, would it take a spray finish well?
@TangerineTypes
Жыл бұрын
Did you end up doing it?
@Lyander25
Жыл бұрын
@@TangerineTypes not yet. I'm happy keeping my keyboard stock and the guy who was gonna pay me to do it kinda vanished haha
I've got a decorated wooden column, think a fluted column at the end of a stair railing. Can I vinyl wrap that? The goal is to avoid painting but provide a fresh coat of paint gloss for an art project. Only needs to last a month.
That corner was kind of rounded. Can you show a sharp corner? I’m worried my paper is going to pierce when I heat and stretch it.
@glasscannon4723
Жыл бұрын
Im no vinyl pro but I would recommend the shrink into place method where while cold u shape it a little bit over the edge and shrink it by heating it a little bit until it stick on the corner but not too hot to where it will pierce through it when it shrinks
very nice work. do you think it is possible to wrap 3d printed stuff?
@thatnutguy5545
Жыл бұрын
it is possible it just takes a lot of patience
Thank you
Doing this demo with gloss black doesn't really help with the lighting
I dont suppose a hair dryer would do?
So I need a heat gun? Will a hair work I am just wrapping a button box
@TonyLoewen
Жыл бұрын
Hair dryer can work just takes a little longer.
How can I get this wood sticker paper in Cameroon
@DrGeta666
7 ай бұрын
it's not "wood sticker paper" it's vinyl wrap. same as for cars. 3M 2080.
Wrapping granite in vinyl 😵💫
@tlbeedy
2 ай бұрын
That granite was HIDEOUS. I’d much rather look at the vinyl 🤣
You skipped the detail of cutting with a knife! Everything else is easy! Somehow, you glide the knife in a straight line, but when I try it the blade wanders. WTF are you using to guide the blade??? Details please mister!
@AutomotiveRestyle
Ай бұрын
Years of practice. You cannot fake knife and squeegee skills