Thanks for watching and let me know below if you have any questions 😊 Check out some of my items in my online shop: Website: www.davidswoodturning.co.uk

It looks like glass! You are a real artist

So beautiful! I just never get tired of seeing all the amazing work that’s done with gorgeous epoxy colors and the stunning grain of burl. I just love that combo.

@DavidsWoodturning

Жыл бұрын

Thank you! 😊

Absolutely amazing and stunningly beautiful

@DavidsWoodturning

Жыл бұрын

Thanks so much 😀 Finally a piece what is fully functional. I mostly make ornamental items.

Molto bravo David!!

Well done young Harry. Keep the dream alive. Ernie smith from brisbane Australia

what could be better,....burl and blue, I totally love this, it would look fabulous with all my blue glass and china.

Beautiful vase. I love the burl and resin. ❤️😎🙃

@DavidsWoodturning

Жыл бұрын

Thanks so much 😊

I maybe late but you never fail to disappoint, 👍🏾🙌🏾 another masterpiece

@DavidsWoodturning

Жыл бұрын

Thank you so much. 😀

Beautiful vase; gorgeous flower arrangement.

@DavidsWoodturning

Жыл бұрын

Thank you so much 😊

Beautiful piece! The colors of the wood and resin go so well together!

Un talent phénoménal 🙏 je ne me lasse pas de regarder les vidéos 👌👍

@NervousNoodles

Жыл бұрын

Moi aussi 👍

Very beautiful piece sir have a great day

@DavidsWoodturning

Жыл бұрын

Thanks so much 😀 Finally a piece what is fully functional vase 🏺

Didn't think I was going to like it but it is Beautiful! Georgous

@DavidsWoodturning

Жыл бұрын

Thanks so much. It means a lot 😀

Absolutely beautiful.

Another absolutely beautiful piece!!

@DavidsWoodturning

Жыл бұрын

Thank you so much 😊

Oh my word it's so pretty 👏🏻👏🏻👏🏻👏🏻👏🏻

@DavidsWoodturning

Жыл бұрын

Thank you very much 😀

This turned out to be an excellent vase! It's also nice with the flowers too! An excellent shelf or mantelpiece display addition!

@DavidsWoodturning

Жыл бұрын

Thank you so much 😀

Another beautiful piece

@DavidsWoodturning

Жыл бұрын

Thank you very much 😀

Beautiful vase, Canada

@DavidsWoodturning

Жыл бұрын

Thank you! 😊

Beautiful choice of colour to go with the amazing burl, another great piece.😘😘

Beautiful!

The combination of the burl and that gorgeous deep blue resin is so beautiful - the addition of the glass tube is perfect as I often wondered if putting water straight into one of your vases would ruin them, so glad you put that tube in. The allover effect with the flowers is stunning! 🤩👍👀🥀🥇🏆

@DavidsWoodturning

Жыл бұрын

Yes most of my items are for ornamental use but I thought with this one I will make it also functional. Too nice vase to be ruined by water 😊

Gorgeous! I love the color!

Wow. That’s gorgeous. I love it.

@DavidsWoodturning

Жыл бұрын

Thank you :)

Really cool. Looks classy too!

Just a lovely piece of art! With the care you take on the finish, that epoxy shines like Murano glass!!

Super tare 🍯🍯🍯👍👍

Beautiful vase. Love the color!

@DavidsWoodturning

Жыл бұрын

Thank you so much 😀 Blue colour is always a winner 😀

that color is incredible!

@DavidsWoodturning

Жыл бұрын

Yes the blue is a winner every time 😀

Very shiny David. Love the color!

@DavidsWoodturning

Жыл бұрын

Thank you :)

beautiful!!!

Beautiful job David as usual! 👍🏻 That blue just sets it off! Thank you for sharing! Cheers!!! 👌

@DavidsWoodturning

Жыл бұрын

Thank you very much 😀 yes the blue is a winner every time

Very beautiful. The care you took is evident in the beautiful finished product. Well done!

Awesome piece mam you make it look so freaking easy!

Beautiful vase David, stay safe, John

@DavidsWoodturning

Жыл бұрын

Thank you! 😊

Beautiful David.

@DavidsWoodturning

Жыл бұрын

Many thanks!

Very lovely. Great finish!

@DavidsWoodturning

Жыл бұрын

Thank you! 😊

I really like the deep blue resin and the burl they look lovely together and I like the introduction of the glass tube. The wood has some lovely grain and I really like the finished vase it is fantastic. I like watching you do your turning you always amaze me thank you x

@DavidsWoodturning

Жыл бұрын

Thank you very much 😀 yes I normally make ornamental pieces but thought with this one i will make it fully functional too 👍

This was beautifully done! The burl always has the best grain and the color you used was perfect!

@DavidsWoodturning

Жыл бұрын

Thank you so much 😀

Как же приятно смотреть на работу Мастера 👍👍👍👍👏👏👏

I really like the lacquer finish. I can really see how beautiful the wood is. And how well crafted it is. Another beauty

@DavidsWoodturning

Жыл бұрын

Thank you! 😊

Це неймовірно красиво👍👍👍

Wow! That is gorgeous! Great job!

@DavidsWoodturning

Жыл бұрын

Thank you! Cheers!

Wow!!! This piece is so beautiful 😍. Thank you again for another stunning piece.

@DavidsWoodturning

Жыл бұрын

Thank you! 😊

Holy smokes! Another gorgeous piece from your hybrid technique. You make it look so easy, but I’m sure you must have done lots of experimenting to get those beautiful colors just right with that wood.

@DavidsWoodturning

Жыл бұрын

Thank you so much 🙂

Very nice shape and well done!

@DavidsWoodturning

Жыл бұрын

Thank you very much 😀

Awesome

I love the colors are great

@DavidsWoodturning

Жыл бұрын

Thank you. Blue wins everytime 😀

Very Beautiful.

@DavidsWoodturning

Жыл бұрын

Thank you very much 😀

That color is stunning! It reminds me so much of some cobalt blue glass bottles i used to collect as a child, made me nostalgic! Beautiful, beautiful work again David!

@DavidsWoodturning

Жыл бұрын

Thank you so much 😀

Very beautiful

@DavidsWoodturning

Жыл бұрын

Thank you! 😊

Love the colors in the vase. The insert is a great idea also. Enjoy your work, just found your channel today.

@DavidsWoodturning

Жыл бұрын

Thank you so much 🙂

The son of a flower grower told me once, that the arrangement needs to be as tall as the vase. Beautiful work today.

@DavidsWoodturning

Жыл бұрын

Thank so much. I am far from being an expert in flower arrangements but tried my best 😀

Très jolie et en plus fonctionnel bravo David’s

@DavidsWoodturning

Жыл бұрын

Merci! La plupart de mes articles sont uniquement destinés à la décoration, mais c'est aussi fonctionnel, donc c'est génial

Very nice David.

@DavidsWoodturning

Жыл бұрын

Thank you very much 😀

Beautiful but the flowers detract from the vase!😅😊 Absolutely stunning!

@DavidsWoodturning

10 ай бұрын

Thank you so much 😊

Very nice mate!!Well done!😮💪👍👌👏👏

@DavidsWoodturning

Жыл бұрын

Thank you! Cheers!

Bonita peça amigo

I love watch woodturning. Ir's fascinating. I have a question : That pot you use, is it a pressure or a vacuum pot? Thank you.

@DavidsWoodturning

Жыл бұрын

Thank you 😊 yes it is a pressure pot. Helps with air bubbles

Muito bem

Good grief but that's one good looking vase.

@DavidsWoodturning

Жыл бұрын

Thanks so much 😀 Finally a piece what is fully functional vase 🏺

Solid work, David! Really fine results. I might've undercut the base a bit more for less hand work, (I'm not a fan of fan of hand finishing the bottom), but that's my only critique on the method, not the results, which is what matters most. :)

god bless your hands

Шикарная ваза.

This was beautiful to watch. (Bonus: I’m pretty sure I could hear doves outside your workshop)👍Awesome video.

@DavidsWoodturning

Жыл бұрын

Thank you so much :) and you are right on the doves 😀

Mama Mia! That is an absolutely gorgeous vase! I love the finish shining like it does. Fantastic work! Beautiful color that worked well with the wood! Awesome!!

@DavidsWoodturning

11 ай бұрын

Thank you so much 😀

👏👏👏👌👍

David, forgive me, you're no florist................but you are a fine woodturner. Nice work.

@DavidsWoodturning

Жыл бұрын

Thank you and You are damn right I far from being a florist and even my wife was not around to assist me with this task sadly 😀

A really nice looking piece, congrats. No criticism but I would like to see it in red

@DavidsWoodturning

Жыл бұрын

Thank you. I make one red and burl no problem. Have not done one for longt time.

I’ve always wanted to try something like this. I am curious, when the object is in the very beginning stage and it’s still square, how hard is it on your hands to use the chisel to start the rounding of the edges process? Beautiful work!!

@DavidsWoodturning

Жыл бұрын

Thanks Jeni. I am taking very small passes at the beginning so no it is not hard on my hands. However, due to not being round therefore is not spinning completely true it will cause loads of chip outs. And those chip outs can be very painful when they hit you hand as they are like lithe glass(resin) shards. Sometimes I take on gloves to protect but do mot show that on camera to avoid showing bad practice. I could trim it in a table saw and bandsaw but both of my saws cut perfect square so in order to trim i would need adjust that.

When working with resin and/or burl wood, do you always use carbide tools and why/why not? Thanks for another inspiring video resulting in a piece that is both functional and beautiful!

@DavidsWoodturning

Жыл бұрын

Thanks Elaine. Burl on its own would not really need carbide, some sharp traditional tools would work perfectly. But when it is a hybrid project (with resin for example) carbides are outperforming traditional chisels. All my hybrid turnings done with negative rake carbide tips and that simply eliminated all the chip outs what i used to have before using negative rake.

@carmicha

Жыл бұрын

​@@DavidsWoodturning ​ Thanks so much for your informative response! I haven't turned any resin hybrids yet but I plan to give it a try soon.

I’ve always wanted to try something like this. how hard is it on your hands to use the chisel to start the rounding of the edges process? Beautiful work!!

@DavidsWoodturning

Жыл бұрын

It is not too hard. Taking light passes so all fine. Takes a bit of time but nothing excessive

Truly amazing. Are your works of art for sale?

@DavidsWoodturning

Жыл бұрын

Thank you very much 😀 yes. Keep an eye on my website each month I upload more items but they don’t tend last for long there 😉 I also let people know when I upload more items

Just a quick question, why is it that you don’t cut down the blank on a band saw to make it hexagonal before turning? It is a time thing or just it’s more fun to turn? Beautiful vase and resin colour choice. Keep up the stunning ideas and videos, always a pleasure to watch.

@DavidsWoodturning

Жыл бұрын

Both my bandsaw and table saw is set to perfect square. In order to trim I would need to adjust to like 45 degrees angle. So at the end I would not safe much time getting all the settings back to normal. Plus it is fun to turn :)

Can you put water for fresh flowers in this type of vase?

Ooppps sorry David wrong channel. Ernie smith from brisbane Australia

@DavidsWoodturning

Жыл бұрын

Thank you! 😊

Where's the glass?

@DavidsWoodturning

Жыл бұрын

Well it means you fast forwarded too much ;)

what are you using to make that mold?

Wot would it be like with the spikes on the outside ,i have a 3 ton peice of spikey elm and i wouldnt want to waste any as i am an amature

@DavidsWoodturning

Жыл бұрын

Check out my others vids i work a lot with burls some i keep some of the spiky burls. Elm is great wood to work and i love the colour

@vinimarshall7301

Жыл бұрын

@@DavidsWoodturning thanks i will sub 👍

**GET THE MOST UNBALANCED LOAD OF WOOD POSSIBLE, PUT IT IN YOUR MACHINE AND RUIN YOUR MACHINE!!**

@DavidsWoodturning

Жыл бұрын

Is this meant to be a compliment ? Not sure I follow 🤔

👍👍👍👍👍

Beautiful!!!

@DavidsWoodturning

Жыл бұрын

Thank you! 😊