Nice

does the amps matter when connected to the fuse box? how do i know which one to use?

where can i find the cables you have and also where can i find the kits you use?

Where do i get the correct adapter and fuses

What fuse do you have on the double fuse

And how did u fire the positive to the fuse skipping the important parts

Hey just found your channel. I understand how to wire one light engine but how do you wire two to the cigarette fuse? Can I combine the power cords via wire tap then run to a fuse tap??

@balesha85

Жыл бұрын

Same question I have

Where’s you get those fuse wire adapters

Do i need to do all of this or can i just plug it into the cigarette lighter?

Yo bro I got the normal starlights , they came out with new effects and stuff like sparkles and meteor effect, can I just buy the thing again and just switch out the module that connects the fiber optics or would I need to rip out the old fiber optics and put new ones back in?

@rileyaylen324

Ай бұрын

New module bro I love it

Show thr link to buy everything you need so you dont need the clamps u just use the box and connect the box w the fuse wires?

So would I need the same amount of amps as the original fuse from the cigarette lighter? For example 20a & 20a top and bottom or 7.5a & 7.5a top and bottom?

@srt_392__

2 жыл бұрын

No I would add another of the same one you pulled out to add on. The starlights only draw a max of 6amps

So for the fuse tape adapter can I use the window or radio fuse sense they only turn on on ignition?

@srt_392__

3 жыл бұрын

Yes you can as long as the stock fuse is above 6amps you can use it

So the negative wire(black) on the star light box goes to a ground. How do I ground it? Just strip the black wire and wrap it around a metal screw connect to car?

@srt_392__

3 жыл бұрын

Hashy313 yes yes and yes. Only other thing I would do is scrape off any paint where your going to drill the screw into.

The negative coming out of the starlight motor needs to be hooked up to the ground right where as the red one connects to the fuse is that all the connections necessary because I’m running my motor straight to the fuze box and I extended the wire I basically cut the power cord that came with the original kit and I added on a wire that would reach my fuze since my motor is in the very back since that’s the best I could. Please respond thank you.

@srt_392__

8 ай бұрын

Yes you did it correctly. When that fuse gets power the starlight motor will be able to turn on.

I just had ambient lights for the doors and a starlight headliner installed in my challenger, now the passive entry won’t work. Any suggestions on what might be the issue?

@Russiancream1k

4 күн бұрын

Ever figured it out

I dont get it if u use the fuse connector and cut the outlet wire connected to the lights do u not need a adapter?

@srt_392__

2 жыл бұрын

Ok so you don’t need a converter or anything bro. Just cut the wires off the Starlights cord and use a butt connector to combine it to the add a fuse and your done. Plug the fuse in and ground the negative wire.

Show exactly what i need to buy

Are you going to use a vacuum and zip ties and neaten it up?

@srt_392__

4 жыл бұрын

The stuff behind the side panel, no I’m not gonna make it neater there. But I remove the power inverter often so I can’t make that part and better because it has to be movable

Ik this video old but hopefully I get a response but is it possible to run to kits to the same fuse?

@srt_392__

Жыл бұрын

You probably could but they both draw there own amperage so it might be too big of a load.. your other option is to wire it to the battery with its own fuse and you can use a switch to turn it off and on

@jessesanchez9364

Жыл бұрын

@@srt_392__ so even putting a bigger fuses could be to much of a load ?

Hey can I get a link to the products you used in the first products you showed?

@brysoneffler638

3 жыл бұрын

^

@retrofiedentertainment4751

2 жыл бұрын

Yes! A link to everything required for this install that you used would be greatly appreciated!!

I wanted to understand but you might as well have been speaking French to me. 😳🤣

@srt_392__

2 жыл бұрын

What do you need help with lol

Can you just cut the wire that comes from the motor for the lights and connect the positive and negative to the battery terminals ?

@srt_392__

4 жыл бұрын

Amer Virk yes you can but it is not recommended to go straight to the battery without a fuse of some sort. I just made a video last week to kinda clear things up with this wiring. Check it out

Want to know if I can power it from my amplifier by putting the wires into the + - terminals with the amplifier wires from the battery

@srt_392__

9 ай бұрын

It will always stay on if you do it that way but it will work

@paxandrax4611

9 ай бұрын

@@srt_392__ is there anyway else I could hook it to the amp so that it turns on and off without a switch

Hey man, I did everything except the wiring. I dont have a battery or fusebox in my trunk, Even off reddit no one is helping me with how I can run cable from the cig lighter cable it came with to my fusebox bc the gauge of the wire is around 20-22 (I opened up the cig lighter cable to get the red & black cable) which is super thin and the current drop and risk of overheating would be high

@srt_392__

3 жыл бұрын

Sometimes you have to do what you have to do. If that’s the only way to wire it then do it that way. The current dray is only like 6amps I know the cigarette fuse can handle that. I just would not use the lighter at the same time my lights are running so you don’t pop the fuse

How do you the wire from inside the cap to the fuse box in the engine bay?

@srt_392__

6 ай бұрын

I don’t understand what you mean. Can you elaborate on your question

@dizzysteak

6 ай бұрын

@@srt_392__ apologies. How Did you run the wire from inside the cab to the fuse box under the hood. Unless your fuse box is already inside the car then I know. I’m Trying to do mine but the only fuse box is in the engine bay. Don’t know if I should drill a hole through the fire wall.

@gerbears21

4 ай бұрын

@@dizzysteakfirewalls should have small black rubber caps, run the wire under the through the hole and put back the cap

Where can you find the fuse thing from like from Amazon

@srt_392__

8 ай бұрын

You can get them at a local auto parts store in small quantities or yes on Amazon

Why would you have a relay to a fuse then to the fuse box? And what are those butt connectors to a fuse called?

@srt_392__

4 жыл бұрын

The stereo shop installed the relay. I didn’t ask for it lol, just told them to install my power inverter. The add a fuse is called “ piggy back auto fuse “

@lamarrjames7385

3 жыл бұрын

What amp fuse did you use for the starlight motor?

Can u send me the link to the shooting stars

@srt_392__

3 жыл бұрын

Link is in the description

@chevyboiii2115

3 жыл бұрын

Ok thank you

Mine won’t turn on unless I use power from my house

@srt_392__

Жыл бұрын

Lol you just have to cut that wire

I’m a girl I need more clarity !! 🤣 how to hook up to the cigarette lighter.

@srt_392__

2 жыл бұрын

Lol it’s all good. I’m actually about to work on the car tomorrow message me and I can make you a more detailed video @srt_392_

@kabriamarie

2 жыл бұрын

@@srt_392__ thank you ! ❤️

@weztcoazt94

Жыл бұрын

@@kabriamariewere you able to do it?

Ummmm why don't you just put it on a toggle switch

@srt_392__

3 жыл бұрын

I want it on when my car is on and off when my car is off automatically.