How to Wire the Oracle Oculus Colorshift Headlights with a BC1 RGB Controller
Автокөліктер мен көлік құралдары
Shop Oracle Oculus Colorshift Headlights - www.quadratec.com/p/oracle-li...
The Oracle Oculus ColorSHIFT Headlights are designed to be a direct replacement for the 2018+ Jeep Wrangler JL and the 2020+ Jeep Gladiator JT. They feature a plug and play wiring connector for the headlight which utilizes a single LED Projector Lens for both low and high beam function. There is a white LED DRL Halo ring, as well as 3 separate RGB LED zones consisting of the outer ring, inner ring and the demon eye that illuminates the projector lens. Using the BC1 Bluetooth Controller, there are a few options for making the RGB wire connections that will allow you to control how the three RGB zones function. Rob explains 3 different wiring options, the first will sync all three zones to the same color using a single BC1, the second will allow all three zones to display different colors using a single BC1, and the third will require 3 separate BC1 controllers to give you independent control over each RGB zone.
#jeep #wrangler #oracle
00:00 Subscribe to Quadratec
00:22 Oracle Oculus ColorSHIFT Headlight Features
01:30 RGB Demon Eye & Halos
02:09 Oracle BC1 RGB Controller Install & Features
03:59 Wiring the BC1 to the Oculus Headlights
04:20 Wiring option 1 - Single BC1 Controller, all zones synced
05:05 Wiring option 2 - Single BC1 Controller, all zones different
06:35 Wiring option 3 - 3 BC1 Controllers, all zones independent
07:55 Visit Quadratec.com to Buy
Пікірлер: 27
Hi I have a question. Do you have to choose a color every time you shut off your vehicle or will your last choice always be there by default ?
Coulda used this last week when I was freezing my ass off trying to wire these up for my wife’s Xmas gift.
can i use the other 2 outputs on the BC1 for other color areas on the headlight ? for example 1 output Demon eye and outer HALO and the 2nd for inner halo ? or one output per individual area of RGB ?
Is there a bc2 install video?
How to make demon eye work?
What front bumper is that?
When I turn my headlights to the off position I still have the low level lights on. I have DRL connected to the F52 fuse and the app isn’t connected. Is there no way to have the engine running with the lights completely off?
You need 6 bc1 all together? Or just 3 for both headlights?
Does the white outer light turn off - mine stays on
Hi, great video. When i connect it using the 3 bc1 controller would i connect both outter halo to one port on the one bc1 controller or do i use 2 ports ( one for each headlight)?can i cover the exposed cables wit electrical tape?
@caharewatkins5447
2 жыл бұрын
I put each light halo to their own line of the four on 1bc1. Basically left halo to one tail on first Bc1. Then right halo to second tail on first bc1 1st bc1 both halos to separate tails 2nd bc1 both middles to separate tails 3rd bc1 both demon eyes separate tails
What are the state la s for doing different colors for the front of the vehicle. I know in Delaware, you can’t have a stove or any red or blue up front unless you are police or fire departments respectively.
@Quadratec
2 жыл бұрын
"ColorSHIFT features are intended for off-road “show” use only and are not compliant for street use. Most states require forward-facing lighting to be white or amber when on public roads."
Where did the battery post extensions come from?
@Quadratec
2 жыл бұрын
They're our Extreme Duty Battery Terminals - www.quadratec.com/p/quadratec/-JL-HDBT-extreme-duty-battery-terminals-jeep-wrangler-jl?
That’s too complicated, make it plug and play and don’t make us order three modules.
@milenkowarez
2 ай бұрын
Yeah that is aggravating because I'm willing to bet every person who ordered these didn't find out they need more controllers until after they have already installed or (in my case) started the installation.
I installed them on my jeep and I noticed some flickering ( beam isn’t constant ) why is that?
I'll wait for the plug and play version.
@johnathanpessetti295
3 жыл бұрын
Exactly! They’re making it more complicated than Need be. We’re not all electrical engineers!
@Jackal_Blitz
Жыл бұрын
@@johnathanpessetti295 They color-coded every single wire for you, and you twist them together like you're closing a bag of bread. I don't know what you think electrical engineers do all day, but I guarantee you it's a hell of a lot more complicated than this.
What is off to the left that you keep looking at?
@Everybodypoops2
3 жыл бұрын
Someone pointing a gun at him making him install this trash.
@MMID303
3 жыл бұрын
Lol it's probably just the teleprompter guy. You don't think he remembers all of this?
Love it
More JK vedios
Needs to be plug and play. Not this pig tail mess.