How to Wire Aftermarket Radio into Any Car | Wiring Colors Explained
Автокөліктер мен көлік құралдары
This video explains basic color codes for aftermarket radio wires. Your radio could be a single din or double din radio, you will need extra wiring harness depending on your make and model of your car.
Support my channel, purchase directly from our online store eazidiy.square.site/s/shop
Aftermarket Radio : **7 inch Radio (use promo code EAZIDIY10 for 10%) eazidiy.square.site/product/7...
Kindly use the link below for your purchase, it helps me with a little commission. Thank you!
**Aftermarket Radio amzn.to/3RUmlNW
* Power Wires **
Constant 12V / Memory Keep Alive: Yellow
Accessory 12V: Red
Dimmer/illumination: Orange with a white stripe
Ground Wires : Black
**Speaker Wires ***
Right front speaker(+): Gray
Right front speaker(-): Gray with a black stripe
Left front speaker(+): White
Left front speaker(-): White with a black stripe
Right rear speaker(+): Purple
Right rear speaker(-): Purple with a black stripe
Left rear speaker(+): Green
Left rear speaker(-): Green with a black stripe
** Amplifier and Antenna Wires ***
Antenna: Blue
Amplifier remote turn on: Blue with a white stripe
Пікірлер: 94
Brotha, that is some banging music!
@eazidiy
4 ай бұрын
Appreciate you bro! Aftobeat popping 🎶
Love the video. I see youve recommended harnesses for people. Coukd you recommended what id be looking for, for my 06 scion xb?
@eazidiy
2 ай бұрын
See this Amazon link amzn.to/3W45E7Z
Yeah they are all color matched in your video. But, I need A video for same exact aftermarket radio to my 2005 Chevy Silver LT 1500 for my Bowes bypass 150 dollar harness. It's got alot of extra wires on it comeing free m the green door charm box.
@eazidiy
Жыл бұрын
Could you send me a picture of your harnesses ( both radio and side into the car) eazidiy@gmail.com. Let me take a look.
On my 2010 chevy cobalt diagram I only see positive and ground. I put the yellow with positive, black with black and put all the colors for speaks. I had removed the original connectors because my friend told me to, I shouldn't have done that and just get a harness. Now it won't turn on when I turn on the vehicle at all. Do I need to put the red wire with the yellow together onto the positive wire? Idk what to do. Please help.
@eazidiy
3 күн бұрын
Yes, put the red and yellow wires together on the positive wire.
I have a question I just hooked up an aftermarket radio on a 2009 Chevy HHR I connected all the wires yellow to yellow but on my harness it comes with a separate red wire I connected that to the ignition switch fuse but it's draining my battery What could be the issue??
@eazidiy
9 ай бұрын
Red wire should be for 12V ACC. Only Yellow wire to 12V battery. If you connect the red wire to your battery directly, it mean your radio will be on at all time.
@user-ms1vb9xk9d
2 ай бұрын
@@eazidiyso how do you do that because I don’t really understand what you mean
My backup camera had a red piggy wire and RCA plug which go to the back of the head unit. It said has go to trigger or reverse wire. In this video, seem like you don't has it, where does it can hook up to ? Thanks you.
@eazidiy
8 күн бұрын
The radio harness has a reverse wire trigger. It is different color wire.
I have one question I have a blue remote wire coming from my amp which wire on the back of the harness should I connect that to to turn it on when the car start up ( the power antenna or splice it into the red wire ? ) thanks
@eazidiy
22 күн бұрын
Splice it into red wire 12v ACC
What if our old radio sietes that where connected don’t have two white wires ?
@eazidiy
Жыл бұрын
Do not understand your question. However, the 2 white wires, solid white is positive and white/black is negative
Do we need to connect the blue wires together?
@eazidiy
6 ай бұрын
You could connect them together.
I have a blue dvr-Ir cable, what is that for and what do i connect it to?
@eazidiy
Жыл бұрын
DVR is Digital Video Recorder, IR is Infrared. The cable you mention sounds like it is meant for video or camera.
I have a 2008 Toyota hiace. Can you please tell me what wire connector I need to connect the radio to my vehicle factory harness. I don’t want to cut my factory harness wire to connect it to the harness that that my new android radio comes with., I just want to plug an play 😢
@eazidiy
4 ай бұрын
This should work for you amzn.to/3hgSwdS
@alessandrogaldzicki1532
3 ай бұрын
@@eazidiyIs there one you can find for a 2005 toyota camry that’s does a similar job?
@eazidiy
3 ай бұрын
The harness will work for 2005 Toyota Camry with no factory amplifier
@alessandrogaldzicki1532
3 ай бұрын
@@eazidiy Ok, this car is has the JBL as well will that change anything?
@eazidiy
3 ай бұрын
You need another harness for a JBL toyota. The first one won't work. Let do some research for you
I have a SJOY stereo. Will this setup work with a 2005 highlander with the JBL amp?
@eazidiy
Ай бұрын
No. It won't work. Check out this video that should help you kzread.info/dash/bejne/hamCstVpqqWzp6g.html
Hey man I need some help I have a 1998 gmc sierra and do I connect the wires to the same color or different colors
@eazidiy
Ай бұрын
Match the wire colors
I have a 2007 jeep grand cherokee with a separate factory amp in the back. I've been told I need to splice the blue wire with the accessory. I've done this and still no sound, the blue wire acts as a constant for some reason even though its labeled antena/amp turn on. Any suggestions?
@eazidiy
Ай бұрын
Yes, splicing the blue amp on wire to 12v ACC can turn on the amp. You must also consider how the amp speakers are grounded.
@eazidiy
Ай бұрын
Do you have an Android radio or a 2DIN radio? You may need to buy special harness or canbus for an Android radioto work. For a 2DIN radio, you need to take the speaker feeds from the RCA ports of the radio. Which means you must have an harness thar can support that.
Wiring harness that goes between car and after market head unit harness has two blue wires, one solid and one with white stripe (amp turn on and antenna wires), while the head unit (after market stereo)harness only has one solid blue wire that the book labels for amp turn on. My question is: can I just connect all three blues, the solid on the head to both the solid and striped on the harness? Or just cap one off? Don’t have an amp and don’t think it’s a power antenna but not 100% sure.
@eazidiy
5 ай бұрын
As long as you car do not have Amp, you may cap off the blue/white wire. Connect just the solid blue wires
@rachelray3250
5 ай бұрын
@@eazidiy what would happen if I did connect all three if I did get an amp. Can you do that?
@eazidiy
5 ай бұрын
@rachelray3250 If you have an Amp them the blue/white must be connected to your Amp on of the radio. For now they can all be connected together if you do not have an Amp. It will still work
PLEASE HELP. I have a 07 civic si, I ordered a Boss BE7ACP. The wire harness connector that powers the after market unit is a 20 pin. My factory head unit is a 16 pin. Can I still use a 16 pin atenna jack and the other 16 pin wire harness connector that comes with it? Or can I only use a 20 pin
@eazidiy
Ай бұрын
You may use them. Match the wires color by color
@joshgonzalez-td6by
Ай бұрын
@@eazidiy I finished installation today, thank you! Everything was perfect and works great, first try. Was overthinking and thought the 20 pin wouldn’t work lol
@eazidiy
Ай бұрын
Thank you for your positive feedback and experience. I'm glad you are able to complete the installation. In the video, I used a 16 pin to 24 pin harness. The concept is to understand the wire color codes. Cheers 🍻
What about the OEM tweeters what colors are those
@eazidiy
Жыл бұрын
Your car must have an Amplifier? The wiring harness in the video is for a non-amp radios
Can I connect the purple 12+ reverse cam wore on with the red 12+ wire? Thanks so much. Asome videos
@eazidiy
Жыл бұрын
The purple +12v reserve cam is the trigger for the radio to go into reverse camera mode. The purple should be connected to the positive wire your reverse light in your trunk.
@freedizz7096
Жыл бұрын
@@eazidiy will it work if I connect the power wire in the trunk to the back up light ?
@eazidiy
Жыл бұрын
Yes, power wire to reserve light positive wire in the trunk and the other end of the power wire Connects to the purple wire of your radio harness.
@freedizz7096
Жыл бұрын
@@eazidiy awesome thanks
@eazidiy
Жыл бұрын
You are welcome
I need the harness if is the 26 pines can you put the link so I can buy it from your store?
@eazidiy
24 күн бұрын
Unfortunately, I do not have the harness available. Thank you
Will this work for a 2008 scion xb?
@eazidiy
25 күн бұрын
Get the correct harness for your car and color match the wires. It will work as long as your car do not have a factory Amplifier
I have polo vivo 9n 2014 could you pls tell how to connect
@eazidiy
6 күн бұрын
Unfortunately I do not have the wiring diagram for your specific car. Simply color match the wires, I hope it will be helpful.
When I go to the explore it says nulldisk what is that????
@eazidiy
Жыл бұрын
I am sorry I don't understand your question. Could you please retype your question?
Nice Video friend, I am trying to use a factory car stereo at home, it works well. But the issue is when power with ATX Power Supply as usual, it goes into 1 hour mode automatically. Any way to overcome this problem.
@hariharanselvaganapathy9832
2 ай бұрын
Also I think the car stereo isn't detecting ignition status.
@eazidiy
2 ай бұрын
Let me understand you. Are you using an external 12v power supply to power the radio?
@hariharanselvaganapathy9832
2 ай бұрын
@@eazidiy Yes an old computer power supply
@eazidiy
2 ай бұрын
Are you sure the output voltage is up to 12V? Connect yellow wire (12v constant) and red wire (12v ACC) to the positive of the ATX. Then Connect black wire ( ground) to the negative of ATX
@hariharanselvaganapathy9832
2 ай бұрын
@@eazidiy Yes I checked it is 12V no problem with that. Other than that is there any other way the car stereo can detect the ignition status of the car.
What if no power on red from car? Run a new wire?
@eazidiy
Жыл бұрын
Red wire is 12V ACC. You should only have 12v when the car is turned otherwise there will be no 12v when the car is off. Yellow wire is the 12v constant ( +12v at all time as long as you have battery in the car)
I found my blue a white wire cut..in the other video I watched his was cut too..why
@eazidiy
4 ай бұрын
Blue/white wire is for Amplifier. It is not needed if you do not have an Amp.
@chaneli4855
4 ай бұрын
Okay thanks...what exactly is the amplifier
@eazidiy
4 ай бұрын
@chaneli4855 You can read more about Amp here blog.rockfordfosgate.com/car-audio/car-amplifiers/what-does-a-car-amplifier-do/#:~:text=Amplifiers%20work%20to%20enhance%20sound,noise%20and%20other%20competing%20sounds.
What if my harness has two yellow wires then what?
@eazidiy
Жыл бұрын
Yellow constant 12v is with the main power harness, you can tell by the size of the wire.
Whats the pink wire for
@eazidiy
3 ай бұрын
Depending on your radio it could mean a different function. It was for the reverse camera trigger in the radio I used.
@kevinflores9117
Ай бұрын
@@eazidiyhow is this one connected? What do i connect it to
i wish you would’ve told me i needed the blue things when i asked you if i needed anything else
@eazidiy
Жыл бұрын
What blue thing? Are you referring cable connectors? If yes, you could connector cables without butt connectors. You can slice cable directly
@eazidiy
Жыл бұрын
Slice and joint the wires together and an electrical tape to wrap up.
what about a black and yellow wire ?
@eazidiy
Жыл бұрын
Depending or your car and the wiring harness, it must be an accessory wire.
My radio is old 02 so I don't have red lol
@eazidiy
6 ай бұрын
Red wire is 12V ACC. Prevents your radio constantly turned on and drain your battery. Please check your radio wiring diagram to determine which wire is for the 12 V ACC.
@ryanarledge51
5 ай бұрын
So on some older cars the radio is t designed with a memory circuit. Mine wasn't so I had to run a wire in to allow it to have a trickle of power to save presets while the car is off. A way to figure out which wire is your accessory wire and your battery wire is to take a multimeter to the wire and to your ground. if it shows 12 volts until you turn the car off it's your accessory. If it keeps showing 12 volts after the car is off it's your battery wire.
Can i ask do you know what power harness for a 2005 mercury sable LS
@eazidiy
11 күн бұрын
Please check online. Amazon, Ebay etc.