Love pneumatic air gun sound effect you added in. LoL

These videos are brilliant. You guys should make videos for every product everywhere.

@appliancepartspros

21 күн бұрын

Thank you!

Very easy repair and easy to follow video. However, it would be nice to see him test the thermostat for continuity -- a test to see if it no longer carries current, that is.

@appliancepartspros

5 ай бұрын

Thank you for the tip. We do have a section that does show you how to troubleshoot the dryer and shows how to test parts to see if they have failed.

Great video, super helpful! I was sure it was the fuse due to a vent blockage. However The most common fault on these is the door switch. The fuse is second most common. Make sure to check your door switch throughly before taking your whole unit apart to access fuse as the switch is easier to access. I had to take switch off to manipulate fully and realized it was in fact the issue after checking fuse that was still intact. This is the machines 3rd door switch.

@appliancepartspros

6 ай бұрын

If there is anything we can help you with at all please let us know.

Jim terry! you are the man! LOL fixed it lickety split! without all the unnecessary hullabaloo. Thank you!

@appliancepartspros

9 жыл бұрын

Bianca Griffin Not sure who Jim Terry is, but I am glad the video helped you get the dryer fixed!

Thanks guys,just got my dryer workin again...Didnt know it was so easy.

Thanks! It works now since it didn't have heat from before the part replacement. Use the 1/4" nut from your multi-purpose size screwdriver

Thank you! Easy to follow directions. It's fixed!

@appliancepartspros

8 жыл бұрын

Glad the video helped you get the dryer back up and running!

Thank you! I just fixed my dryer myself. Kristina

Great sound effects!!

For a dryer I'm fixing the heating unit is bad one of the coils is just melted at a point.I don't have a volt meter should I replace the other fuses anyways which ones?

Can I leave the duct hose connected when I remove back of dryer?

Please help! We don't have any connecting wires to our thermal fuse. I want to put some in and install correctly, but I don't know what should connect to what. To what, exactly, are these wires connecting to? Is there someplace where I can see a full layout of the wire connections in a dryer?

How can i check that the thermal fuse is blown? If the fuse is not blown there might be other problem.

@appliancepartspros

10 жыл бұрын

The thermal fuse can be tested for continuity. If it has continuity, it is good and the problem is elsewhere.

Would a bad thermal fuse cause an electric dryer to run for the majority of the cycle, then shut off, and continue to turn itself on and off until the cycle is finished?

@appliancepartspros

7 жыл бұрын

No, the thermal fuse is a safety device that prevents the heat from working, if it goes over its rated temperature. Without knowing what you have, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/

Question Matt : What is the amps of a thermo fuse #3392519 for a whirlpool dryer ? my new fuse only worked for 3 loads and blew again. My lint tube and lint screen are both clean. Could it have just been a defected fuse or is there something else blowing out the fuse that I can check ? I used a car fuse so that my wife could finish the last load and I removed it when she was done. What's the difference in using a thermo fuse and a car fuse besides the price ?

@appliancepartspros

9 жыл бұрын

Frank Llamas Thermal fuses work on temperature not amps. If it went after 3 loads I would check all the ducting, from the lint screen all the way outside. If the blower duct where the fuse is located gets too hot it is usually some sort of air flow restriction. It is a safety device so if you have an amp type fuse in there you should swap it out with a new thermal one before running the dryer

RUNNING with a tripped thermal fuse?? I. Don’t think I have ever come across a dryer that continues to run with a tripped thermal fuse. Blooper?

How can we tell if this our problem? The dryer runs but it wont heat. I’ve also heard that it could be the coils

@BrianIrwin

11 ай бұрын

Do a continuity test across the fuse, if you have continuity the fuse is functioning, if the circuit it open, it is blown and will need to be replaced.

how do i find the correct thermal fuse for my gas dryer? All i see is Whirlpool Gold Ultimate Care II

@appliancepartspros

8 жыл бұрын

The model number tag is usually located around the door area.

@ohwatabetty

8 жыл бұрын

+AppliancePartsPros we have a whirlpool gold ultimate care II. we replaced the thermal fuse today and it's still not heating up. do you recommend we try replacing something else?

@appliancepartspros

8 жыл бұрын

No heat could be a few things, more than I can cover here! Without knowing what you have, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/

Nice,,,,,,,,,,,

@appliancepartspros

6 жыл бұрын

Thanks. Glad we could help!

I need you tube to show me how to fix a whirlpool dryer that won’t spin

@appliancepartspros

9 ай бұрын

What is your model number? Have you tried to take the machine apart to check the belt?

This is a different dryer than what the description told me. I don't have a rear panel

The dryer won’t spin

@appliancepartspros

9 ай бұрын

Have you checked the belt to see if it was broken?

sweet mop lol

Repair guy would charge you over $100

@appliancepartspros

Ай бұрын

If there is anything we can help you with please let us know.