How To: Whirlpool/KitchenAid/Maytag Freezer Drawer Slide WPW10120018
Жүктеу.....
Пікірлер: 26
@johnoconnor5581 Жыл бұрын
I watch a lot of videos for education and pleasure and as repair videos go, this should get an award. Very professionally done in step by step order with a list of required tools at the beginning. This video turned a relatively complex component replacement into an easy task. I never could have properly completed this task without this video
@karunaldАй бұрын
The engineers for Whirlpool/KitchenAid purposefully made this SO hard. Can't even remove a drawer for cleaning without spending an hour mangling the 2 'tabs. BTW - my $4k Kitchenaid for 5 years still doesn't make ice.
@appliancepartspros
Ай бұрын
I understand your frustration. If you need assistance or have questions, just let us know!
@robertmankin765 Жыл бұрын
Thank you you made it an easy task
@matlachaboatridesandrental28414 жыл бұрын
Great video on replacement. I ordered full slide assembly. My Door Brackets on original with screws 23 inch on center were different than replacement with screws 24 inch on center BUT the old was interchangeable the new. Hint - Do not discard any old parts until finished as you may need old but useable features.
@nenesgarage71036 ай бұрын
Thank you for this great video. Do you recommend replacing both glides at the same time? I replaced my right hand side and the door seems to be tilted to the left. I don’t know if it’s because my left glide is the original ? Thank you in advance!
@appliancepartspros
6 ай бұрын
You are welcome. If the drawer is tilted to the left then we would recommend replacing that glide as well and see if that would help fix the issue you have.
@Archrynut9 ай бұрын
Thank you, thank you for the help
@appliancepartspros
9 ай бұрын
You are very welcome. Glad we were able to help you. If we can help you in the future please let us know.
@mitchvass449829 күн бұрын
Thank you for your video, I replaced the slide no problem. Although, I noticed on the right side where the gear goes, in the rear, the teeth rack on the frame of the fridge has three teeth knocked out. Is there a kit for repair for this? Because what happens is: if you pull freezer door on the left of the handle. It cocks out first. because the gears don't pull the left side. If I pull from the center its not bad. Is there A kit to repair the teeth rack built onto the fridge? thank you.
@appliancepartspros
29 күн бұрын
What is your model number?
@mitchvass4498
28 күн бұрын
@@appliancepartspros GB2FHDXWQO2 Wow thanks for the reply.
@appliancepartspros
28 күн бұрын
Thank you. The part number is W11489994. You can place the order through our website, or you can call us at 1-877-477-7278 to place the order over the phone.
@mitchvass4498
28 күн бұрын
@@appliancepartspros Ok thank you very much just what I need. You are great. Mitchell
@appliancepartspros
28 күн бұрын
You're welcome!
@Timetryp5 жыл бұрын
The freezer drawer will not come out. Something is causing the left hand rail to stop before being fully extended. I cannot remove the upper or lower baskets and have no access to any screws. How does one deal with a malfunctioning slide rail?
@jojorofo
3 жыл бұрын
Did you ever find a solution to this?
@MrSamane22
Жыл бұрын
Hey, I have the same problem, I can only open my drawer to 11inches. I can't remove any of the metal baskets. Did you find a solution?
@jaymiedavis21084 жыл бұрын
Why you cant paint the the slider drawer
@waynebryan1010 Жыл бұрын
What the price
@heatherjudson3601 Жыл бұрын
What if the drawer won't open at all? It is not frozen. It has been unplugged for over 50 hours.
@gatorr4life
Жыл бұрын
Same here. Unplugged it to defrost and clean it up a bit. Took out the bottom tray and that was it. Cleaned the freezer then reinserted the tray. Now it all of a sudden won’t upon all the way. nobody on these how to videos will answer me. Lol some of these videos are over 3 years old. 😕
@ipalermo71PR Жыл бұрын
My right side rail came off it's slider and I can't get it back in 😥
@waynebryan1010
Жыл бұрын
My leflside slide rail not coming out and I cannot get it in
@kenengland57356 ай бұрын
Old school refrigerator didnt have this bs problem
Пікірлер: 26
I watch a lot of videos for education and pleasure and as repair videos go, this should get an award. Very professionally done in step by step order with a list of required tools at the beginning. This video turned a relatively complex component replacement into an easy task. I never could have properly completed this task without this video
The engineers for Whirlpool/KitchenAid purposefully made this SO hard. Can't even remove a drawer for cleaning without spending an hour mangling the 2 'tabs. BTW - my $4k Kitchenaid for 5 years still doesn't make ice.
@appliancepartspros
Ай бұрын
I understand your frustration. If you need assistance or have questions, just let us know!
Thank you you made it an easy task
Great video on replacement. I ordered full slide assembly. My Door Brackets on original with screws 23 inch on center were different than replacement with screws 24 inch on center BUT the old was interchangeable the new. Hint - Do not discard any old parts until finished as you may need old but useable features.
Thank you for this great video. Do you recommend replacing both glides at the same time? I replaced my right hand side and the door seems to be tilted to the left. I don’t know if it’s because my left glide is the original ? Thank you in advance!
@appliancepartspros
6 ай бұрын
You are welcome. If the drawer is tilted to the left then we would recommend replacing that glide as well and see if that would help fix the issue you have.
Thank you, thank you for the help
@appliancepartspros
9 ай бұрын
You are very welcome. Glad we were able to help you. If we can help you in the future please let us know.
Thank you for your video, I replaced the slide no problem. Although, I noticed on the right side where the gear goes, in the rear, the teeth rack on the frame of the fridge has three teeth knocked out. Is there a kit for repair for this? Because what happens is: if you pull freezer door on the left of the handle. It cocks out first. because the gears don't pull the left side. If I pull from the center its not bad. Is there A kit to repair the teeth rack built onto the fridge? thank you.
@appliancepartspros
29 күн бұрын
What is your model number?
@mitchvass4498
28 күн бұрын
@@appliancepartspros GB2FHDXWQO2 Wow thanks for the reply.
@appliancepartspros
28 күн бұрын
Thank you. The part number is W11489994. You can place the order through our website, or you can call us at 1-877-477-7278 to place the order over the phone.
@mitchvass4498
28 күн бұрын
@@appliancepartspros Ok thank you very much just what I need. You are great. Mitchell
@appliancepartspros
28 күн бұрын
You're welcome!
The freezer drawer will not come out. Something is causing the left hand rail to stop before being fully extended. I cannot remove the upper or lower baskets and have no access to any screws. How does one deal with a malfunctioning slide rail?
@jojorofo
3 жыл бұрын
Did you ever find a solution to this?
@MrSamane22
Жыл бұрын
Hey, I have the same problem, I can only open my drawer to 11inches. I can't remove any of the metal baskets. Did you find a solution?
Why you cant paint the the slider drawer
What the price
What if the drawer won't open at all? It is not frozen. It has been unplugged for over 50 hours.
@gatorr4life
Жыл бұрын
Same here. Unplugged it to defrost and clean it up a bit. Took out the bottom tray and that was it. Cleaned the freezer then reinserted the tray. Now it all of a sudden won’t upon all the way. nobody on these how to videos will answer me. Lol some of these videos are over 3 years old. 😕
My right side rail came off it's slider and I can't get it back in 😥
@waynebryan1010
Жыл бұрын
My leflside slide rail not coming out and I cannot get it in
Old school refrigerator didnt have this bs problem
@appliancepartspros
6 ай бұрын
Is there anything we can help you with?