How to Welding Plastic PP polypropylene - video tutorial
Тәжірибелік нұсқаулар және стиль
Watch More: ataszek.pl/47-spawarki
In the video you will see:
Welding fast triangular welding nozzle
Welding welding nozzle
Swing welding
Plastic Welding PP
How to welding plastic PP
The equipment used in the film is:
Bosite-D hand welder
Taper nozzle 5mm,
Fast triangular welding nozzle,
Pre-welding nozzle,
Scraper 65 mm,
PP adhesive
We invite you to watch the whole movie.
Remember to subscribe to channels:
- Facebook - / ataszek
- KZread - https: // / subscription _...
- Twitter - / ataszek
Пікірлер: 69
Excellent explanations .. thanks
@Ataszekinternational
6 жыл бұрын
Thanks! Greetings
Thanks for the great video!
@Ataszekinternational
Жыл бұрын
thanks !
good presentation. i can't help noticing that your welder is absolutely identical to my Leister triarc right down to the tips and off course colour. Are u associated with them. I don't bother with the speed tips to be honest instead i pendulum weld everything with excellent results. By pendulum i mean the same as you do in the second weld. Cheers
@Ataszekinternational
6 жыл бұрын
Thanks, my Welder is BOSITE-D. its very similar to Leister.
Very educational, thank you........one of the best explanations on here, am i one of a rare breed welding PP ?
@Ataszekinternational
6 жыл бұрын
Hi There ! - iam sure not really :) Greetings!
@juniorpinca4316
Жыл бұрын
Hi I'm pp welding and PVC palstic welding in the Philippines..how to apply in your company
Nice video!.
@Ataszekinternational
6 жыл бұрын
:)
Thanks for the information
@Ataszekinternational
5 жыл бұрын
No problem for us :)
Thanks for the video .Can you tel me if the heath gun you are using blowing hot air continuously .I just bought heath gun look very similar to one you are using but it keep cutting on- of all time couple second on couple second of ,is this normal or should it blow evenly thanks in advance Mike
@Ataszekinternational
3 жыл бұрын
We don't know what you purchased, but this device has a continuous blowout. In addition, it is suitable for continuous operation, even outdoors.
How strong are the welds? Can you make a video of you trying to break it?
@Ataszekinternational
4 жыл бұрын
The weld is really durable, you have to trust us, or visit the Polish KZread channel and check out other videos
Hi every body, I have a very important question. Can this welding method resist in 90 C temperature? To brief, I have to weld thin Polypropylene and PTFE foils together to fabricate a setup (membrane distillation module) and high temperature water (90 C) would be passed in this setup. How can I weld them to not to be separated in 90 C? Regards
@Ataszekinternational
Жыл бұрын
You have an ultrasonic method. It is not possible to weld PTFE with polypropylene.
Support to technician to learn process of plastic welding
Good video.Do you use PP welding rod to weld ?
@Ataszekinternational
Жыл бұрын
Yes we are producer of this type of plastic and many more.
Could I ask you? Where is the limit with speed and high temperature? If I want to weld faster I have to rise up the temperature but i guess I can't do that forever. I have Leister triac AT so I can also change speed of the air (50 - 100%). And my second question is what about front angle of the speed noozle? What it can impact? Thank you!
@Ataszekinternational
2 жыл бұрын
it should not exceed 350 degrees, do not raise the temperature and the blow out is enough. We don't understand the second question. Do you have quick welding nozzles?
@tomas12912
2 жыл бұрын
@@Ataszekinternational Yea sorry. Quick welding nozzle. Same like you at 11:00
Unfortunately that would not be water tight
Buenos días a todos quiciera saber Si lo podrían traducir al español se los agradecería mucho estoy aprendiendo sobre este tema y me gustaría aprender más de profesionales
@Ataszekinternational
5 жыл бұрын
Hola, será muy difícil, pero siempre puedes traducir los subtítulos en inglés al español.
@jimmyangelriosvega4648
5 жыл бұрын
@@Ataszekinternational muchas gracias por su respuesta 👍👍
Can you butt weld plastic panels with a hot air welder? Panels that are 10 mm thick?
@Ataszekinternational
Жыл бұрын
yes!
Does this work with ITW Formex fireproof Polypropylene?
@Ataszekinternational
Жыл бұрын
Do you mean self-extinguishing PPs?
Can you tell me set temperature
@Ataszekinternational
2 жыл бұрын
About 300 C
What is the type of this PP? PP-H?
@Ataszekinternational
10 ай бұрын
Polypropylene, Homopolymer - has higher chemical resistance.
When you weld, do you melt the surface as well as the rod? Or do you just melt the rod? I cannot get a strong weld if I don't melt the surface so I might be doing it wrong.
@Ataszekinternational
4 жыл бұрын
We melt both surface.
@Farseer1995
4 жыл бұрын
@@Ataszekinternational thank you. :)
Watch at 1.5x speed
@alissonbernardi1044
4 жыл бұрын
2x is good
모서리 부분 재 용접 해라
Hi I'm pp welding and PVC palstic welding.. how to apply in your company
@Ataszekinternational
Жыл бұрын
We do not provide services, but we sell equipment and accessories. :)
@juniorpinca4316
10 ай бұрын
👍
Sir Where can we buy this welder in America
@Ataszekinternational
4 жыл бұрын
I think it's not possible.
@jackmills5071
4 жыл бұрын
Try online
@John-4649
2 жыл бұрын
Amazon
@Ataszekinternational
2 жыл бұрын
@@John-4649 Not really.
@Ataszekinternational
2 жыл бұрын
@@jackmills5071 ataszek.com
안녕하세요, 용접공이 모집 있습니까?
@Ataszekinternational
Жыл бұрын
죄송합니다. 저희는 서비스를 제공하지 않습니다. 제품만 판매합니다.
Machine parcel chahie bhai
@Ataszekinternational
Жыл бұрын
Check our site: ataszek.com
I know this job ..
@Ataszekinternational
10 ай бұрын
:)
@sobujgazi1111
10 ай бұрын
@@Ataszekinternational Have a job vacancy any country
$20 soldering gun can do the same thing.
@Ataszekinternational
10 ай бұрын
The question is different. How long will this soldering iron work? The second thing: a soldering iron is not a plastic welder.
I am PP welder
@Ataszekinternational
2 жыл бұрын
We are proud of you :)
Voice in background very distracting; could not follow the content.
This is not perfect welder parsan
@Ataszekinternational
10 ай бұрын
It was about showing the technique itself