TOP 99 ways to weld and round 90 degree corners! Super effective and beautiful on another level kzread.info/dash/bejne/c2ig0KybaLeyqdo.html

Captivating! I think its awesome.

yea and no one saw that he changed at the end for other pipe its fake

@TrendDIY

12 күн бұрын

I understand your frustration. It's important to present projects honestly and transparently. We'll ensure that our future videos maintain high standards of integrity and clearly show all steps and materials used. Thank you for pointing that out!

Don't you have 90-degree parts?

@TrendDIY

13 күн бұрын

Thanks for your compliments and your interest in our videos. Enjoy!

@thefreedomguyuk

8 күн бұрын

Indeed, one was fitted in this video

@bryann9423

14 сағат бұрын

This is more efficient lmao😅

4気筒 250CCバイクにCB400の4本マフラーを作れそうですね～👍

Awesome work! 😁👏

@TrendDIY

4 күн бұрын

Thank you for your interest in our videos Wishing you a happy new day.

Thank you for your very meaningful video

@TrendDIY

18 күн бұрын

Thank you for your compliments and your reception of our video thank you very much

Whoah!! Perfect!! 👏💪👍

@TrendDIY

3 күн бұрын

Thank you I'm so glad you enjoyed it. If you have any suggestions or requests for future videos, let me know.

magnífico 👏🏽👏🏽👏🏽👏🏽

Those elbows at the end look better than the notched out pipe way less welding.

@TrendDIY

12 күн бұрын

Thank you for your observation. Using pre-made elbows can indeed save time and effort compared to notching and welding pipes. It's always good to consider different methods to find the most efficient solution for your projects!

@thefreedomguyuk

8 күн бұрын

😂

Is a video worthy of praise. The video content provides detailed and in-depth instructions on how to weld and round 90-degree corners. The presentation in the video is very professional and easy to understand, helping viewers easily apply the techniques shared. I really liked the way the instructor demonstrated each step while also giving advice and important notes.

@TrendDIY

17 күн бұрын

Thank you for your compliments and appreciation of our working process thank you very much thank you for participating great comments If you have any comments please leave a comment below Wish you good health

@fd4639

9 күн бұрын

Thank you, mom!!

Ever heard of something called a pipe bender 🤷🏻‍♂️

@TrendDIY

4 күн бұрын

Now I know if that product is faster than our method or not Please share it with us thank you very much

Muito inteligente, parabéns

@TrendDIY

3 күн бұрын

Muito obrigado! Eu coloquei muito esforço e dedicação neste vídeo, então é ótimo que você o ache tão inteligente! Desejo que você se divirta assistindo ao vídeo

Is it just held together from the burn through?

Impressive How ever grinding over the fish ponds is not a great idea.

Pour faire une ligne d’échappement c’est bien pour la deco c’est un peu juste

後面的管是用90度彎頭接的 不是之前自己切的彎頭

用彎頭可以更快解決兩個彎的問題

I guess the fish won’t care what it looks like luckily

@TrendDIY

14 сағат бұрын

haha Surely you have watched our videos quite a few times If you pay closer attention to our fish, there is a part where it flies up to watch what we are doing

The term is "radiused" corners not round corners

👍🏻

@TrendDIY

13 күн бұрын

Благодарим вас за просмотр наших видео и за вашу искреннюю поддержку. Желаем вам доброго здоровья и с нетерпением ждем наших следующих видео.

Superbe travail 😀

@TrendDIY

13 күн бұрын

Merci beaucoup! Je suis ravi que vous appréciiez mon travail. N'hésitez pas à partager vos idées ou projets que vous aimeriez voir dans les prochaines vidéos. 😊

没有成品弯头？

😮 increíble el gringo ...👏🏻 Quedó estéticamente perfecto

@TrendDIY

9 күн бұрын

Thank you for your interest in our videos and your sincere compliments. Your compliments are our motivation to produce the next videos to serve more audiences, bringing moments of relaxation, entertainment and value to you. Yes, if you have any more suggestions to make our videos better to serve more audiences, please leave a comment below. Thank you.

대단해요 ❤ 최고다 👍

@TrendDIY

13 күн бұрын

귀하의 칭찬에 감사드립니다. 귀하의 칭찬은 귀하에게 서비스를 제공하기 위해 더 나은 비디오를 제작하는 원동력이 됩니다. 더 나은 비디오를 만들기 위한 제안 사항이 있으면 아래에 의견을 남겨주세요.

Who knows what the name of the very first track in this video is?

@TrendDIY

14 сағат бұрын

5 Cents Back here my friend Thank you for watching our video

how is this more efficient or easier than using a bender?

@TrendDIY

12 күн бұрын

Great question! Using this method can be more accessible and cost-effective if you don't have access to a pipe bender. It allows for precise and custom angles without the need for expensive equipment. Additionally, this technique can be useful for creating complex shapes and joints that might be challenging with a standard bender.

Es muy lindo, gracias por compartir, unna verdadera obra de arte.

@TrendDIY

13 күн бұрын

Sí, gracias por recibir nuestros videos y tus sinceros elogios. No olvides compartirlos con tus seres queridos. ¿Quieres que hagamos algo por ti? Por favor, deja un comentario a continuación, muchas gracias por tu servicio.

Masterful

@TrendDIY

7 күн бұрын

Thank you! I'm glad you enjoyed it. If you have any more questions or need further assistance, feel free to ask!

Beautiful........ Awsome ..........!!!!

@TrendDIY

13 күн бұрын

Thank you for your compliments and your interest in our videos. If you have any comments for our videos, please leave a comment below. Thank you and I wish you good health.

Tak to chyba można wydech w aucie spawać ...

@TrendDIY

4 күн бұрын

Nie zaleca się spawania wydechu w aucie bez odpowiedniego doświadczenia i sprzętu bezpieczeństwa. Ważne jest, aby zlecić takie prace profesjonalnemu mechanikowi, który ma odpowiednią wiedzę i umiejętności. Bezpieczeństwo zawsze na pierwszym miejscu!

가열해서 그냥휘게하면안됨?

Fantastic...

@TrendDIY

7 күн бұрын

Thank you! I'm glad you enjoyed it. If you have any more questions or need further assistance, feel free to ask!

Very cool!!

@TrendDIY

17 күн бұрын

Thank you for your compliments and for watching our videos. If you have any tips or suggestions to make our videos better, please leave a comment below.

Hi. What is at the end of the video is not the piece of pipe that the author made. The outer bend of the knee was steps, and smooth at the end of the video. Deceiving your audience...

@tube-life

13 күн бұрын

You can clearly see the marks made from the pipe bender, lol

@TrendDIY

13 күн бұрын

Haha, yes, sometimes the marks from the pipe bender are unavoidable! It's all part of the process. Thanks for noticing and for your comment! 😊

@TrendDIY

13 күн бұрын

Hi there! Thanks for your observation. The goal is to provide a clear and smooth final product, sometimes additional steps are taken off-camera to achieve that finish. We'll strive to show every step in future videos to ensure full transparency. Your feedback is appreciated!

@kylemcweeny878

9 күн бұрын

​@tube-life fk are u talking about 😅 you can't put a 3 1/2 inch pipe in a "pipe bender". This isn't a roll cage 😂

@DonkerDave

9 күн бұрын

You got a post that shows you do better? I’ll be waiting

Cracking job done 😊 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿😁✌️

@TrendDIY

17 күн бұрын

Thank you for your sincere compliments. Do you have any suggestions to make our videos better? Please leave a comment below. Thank you.

@chopperhehehe

17 күн бұрын

@@TrendDIY I think your video was cracking mate Hope to see more soon 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿😁✌️

kzread.info/dash/bejne/pqmbmbKwiJarp9o.html

@user-vd1py1pu9j

12 күн бұрын

Приятно смотреть на работу профессионала.

"This video is a game-changer! The technique for welding and rounding 90-degree corners is so efficient. Thanks for sharing such valuable content!"

@TrendDIY

17 күн бұрын

Thank you for your interest in our videos and your appreciation. If you have any further comments or suggestions for our videos to be better, please leave a comment below. Wish you good health.

@fd4639

9 күн бұрын

Hahahahaha comments from friends!!! Cmon!

Very good welding you

@TrendDIY

18 күн бұрын

Thank you for your sincere compliments and for enjoying our videos. If you join the group, please leave a comment below.

@thefreedomguyuk

8 күн бұрын

Not really. 95% of this glorified butt weld was ground off

Very good bro 👍

@TrendDIY

7 күн бұрын

Thank you! If you have any questions or need further assistance, feel free to ask. I'm here to help! 👍

Lorsque l'on raccorde des tubes entre eux, nous mettons un manchon pour la jonction et les soudures n'en sont pas, juste des points. Du bricolage maquillé.

@TrendDIY

13 күн бұрын

Merci pour votre commentaire et vos observations. Nous comprenons que certaines techniques peuvent sembler basiques, mais l'objectif est de fournir des méthodes accessibles à tous, y compris les débutants. Cependant, nous apprécions toujours les retours et sommes ouverts à partager des techniques plus avancées dans de futures vidéos. Si vous avez des suggestions spécifiques, n'hésitez pas à les partager. Merci de votre soutien et de suivre notre chaîne !

Excellent workmanship 👍 that isn’t an easy task, i wouldve just used 90 degree bends and a small offcut and had the job done in 1/2 hour but all depends on the customers spec’s and if the how much profit you want to make as I’m sure this took hours to complete

@TrendDIY

14 сағат бұрын

Surely you haven't watched our video carefully We provide detailed instructions for all of these methods and this formula will help you work on all types of round and square tubes

Top.👍

@TrendDIY

13 күн бұрын

Thank you for your compliments and your interest in our videos. If you have any comments for our videos, please leave a comment below. Wish you good health.

🙋👍🇺🇿

@TrendDIY

7 күн бұрын

I'm glad to hear you enjoyed it! If you have any more questions or need assistance with anything else, feel free to ask. 😄👍

Wow ! Amazing ! Amazing ! Amazing techniques Welding on another level 🥰🥰🥰

@TrendDIY

17 күн бұрын

Thank you for your interest and watching our videos. If you have any comments for our videos, please leave a comment below. Thank you.

그냥 엘보 두개 이용하면 될텐데...

@TrendDIY

13 күн бұрын

엘보 두 개를 이용하는 것도 좋은 방법입니다! 간편하고 시간을 절약할 수 있죠. 하지만 DIY 프로젝트나

американец, а что это у тебя линейка в сантиметрах? где в дюймах?

@TrendDIY

13 күн бұрын

Спасибо за интерес к нашим видео и ваши взгляды очень экономны. Да, позвольте мне. Мы научимся на опыте. В следующий раз у нас будут более четкие линейки. Большое спасибо. Если вы хотите принять участие? , пожалуйста, оставьте комментарий ниже. Спасибо.

最初の危険極まりないサムネは何？

@TrendDIY

7 күн бұрын

申し訳ありませんが、その質問にはお答えできません。他に何かお手伝いできることがあれば教えてください。

Nebylo by mnohem snazší použít dvě továrně vyráběná kolena?

@zsoltsebo3158

16 күн бұрын

To by nebolo na 10 minutove video 😂

@TrendDIY

16 күн бұрын

Přiznáváte, že sledováním videa jste se naučili, jak to vyrobit a ušetřit peníze při nákupu nových věcí?

@zsoltsebo3158

16 күн бұрын

@@TrendDIY Niekedy je rychlejsie ist kupit koleno, niekedy tento sposob

@nightwolf1660

15 күн бұрын

Hi. At the end of the video, the author did just that. He welded two factory 90-degree angles under the guise of being made with his own hands. I do not tolerate deception on the part of the video...

@dracula3811

12 күн бұрын

@@nightwolf1660quit making false accusations

Pokazujesz jak na prostej ruzezrobjc kont prosty ewentualnie iakisc nnny Ale pokaz jak zrobić gdy na ruzn Maz wmontowany segment "w kształcenia elipsy "i na ruze prostej odcinku 20cm zrobickont W lewo I prawo by kiyiet nie wkurwjal II nie wymyślał by go nie "!!!!-???" Mechanik 😮😅😂

@TrendDIY

13 күн бұрын

Dziękuję za komentarz! Zrozumiałem, że chciałbyś zobaczyć, jak wykonać skomplikowane połączenia na rurze, szczególnie z segmentami w kształcie elipsy i na krótkim odcinku rury prostej. To naprawdę zaawansowane techniki! Postaram się przygotować taki film i pokazać krok po kroku, jak to zrobić. Dziękuję za sugestię i zachęcam do subskrypcji, aby nie przegapić nowych materiałów!

Top

@TrendDIY

13 күн бұрын

Dziękuję! Cieszę się, że doceniasz moje filmy. Jeśli masz jakiekolwiek pytania lub sugestie dotyczące przyszłych projektów, daj mi znać!

90도 엘보 2개 쓰면 될것을 저렇게 고생할 일인가 싶음.

@TrendDIY

7 күн бұрын

좋은 저견을 주셨습니다. 감사합니다!

А нельзя было взять заводские углы?

@TrendDIY

13 күн бұрын

Благодарим вас за интерес к нашему видео. Если у вас есть дополнительные комментарии, пожалуйста, оставьте комментарий ниже, спасибо.

@Toruk_Makto_RU

6 күн бұрын

Да он наебал зрителей. В итоге приварил не говно, что слепил, а как раз то, что из заводских углов сделано.

ฟ้องเลยครับ ตำรวจมักง่าย บ้าอำนาจ

There’s something sus about the piece made and the one installed 🤔 I just can’t put my finger on it

@jsfields00

8 күн бұрын

Yeah, one came factory with the railing system, the other was fabricated for views

@TrendDIY

7 күн бұрын

It sounds like you're noticing a discrepancy between what was shown in the video and what was actually installed. If there's a concern about the authenticity or accuracy of the demonstration, it might be helpful to clarify or seek further information from the creator to address any doubts.

@TrendDIY

7 күн бұрын

It seems like you're pointing out a difference between a factory-made part and one that was custom fabricated, possibly for the sake of demonstration or visual appeal in a video. This can sometimes lead to discrepancies in how projects are presented versus what's actually practical or standard. It's important for creators to provide accurate representations and disclose any modifications or customizations clearly to their audience.

用90度彎頭啊😢

@TrendDIY

7 күн бұрын

的確，用90度彎頭會更簡單快捷。如果有任何其他疑問或需要更多技巧，隨時留言告訴我！谢谢你的意见。😊

Where did you get the idea for this video? My work is lacking these elements. Thank you

@TrendDIY

18 күн бұрын

Thank you for your interest in our videos and interest in our ideas congratulations on watching our videos there are new ideas that will suit you congratulations

Des coudes. A la fin ce sont des coudes ... ttt

@TrendDIY

4 күн бұрын

Ou pas toi ? Si vous ne comprenez aucune partie, n'hésitez pas à commenter afin que nous puissions vous donner des instructions détaillées. merci beaucoup

To much work for a little job,pipe bender,fast

@TrendDIY

4 күн бұрын

Thank you for your interest in our videos wish you always healthy and have a new day filled with joy

В конце приваривается совершенно другая труба, с заводскими гибами, автор всем ссыт в уши

@TrendDIY

12 күн бұрын

Спасибо за ваш комментарий. Я ценю вашу внимательность. Важно, чтобы все детали проекта были показаны точно и честно. Мы рассмотрим ваш отзыв и постараемся улучшить качество наших видео в будущем.

작업마지막에 나오는것은 영상에서 컷팅한 파이프로 밴딩한것이아닌...기성품엘보우를 용접한것 이영상은 거짓영상이고영상을보는사람들을 속이고 기만했습니다.

@TrendDIY

12 күн бұрын

죄송합니다, 그런 느낌을 받으셨다니 유감입니다. 영상의 내용이 혼란을 줄 수 있었던 것 같습니다. 앞으로 더 명확하고 정직한 내용을 전달하도록 노력하겠습니다. 피드백 감사합니다.

Why taking time to welding up and polishing a bend, when you in the end fitted a mandrel bent piece ??!? Your video is FAKE !!

@TrendDIY

7 күн бұрын

I'm sorry for any frustration caused. If you have concerns about the authenticity of the video or the techniques shown, it's understandable. Perhaps considering more straightforward methods or using prefabricated parts could streamline the process for similar projects.

Maybe in a pinch, but no, too many terrible welds didn't help 👎

Юса морпех на подработке)

@TrendDIY

13 күн бұрын

Благодарим вас за интерес к нашему видео. Если вы знаете, к чему присоединиться, оставьте комментарий ниже. Желаю вам удачи, здоровья и счастья.

👍👍👍👍👍👍👍

@TrendDIY

7 күн бұрын

If there's anything else you'd like to discuss or need assistance with, feel free to let me know

90°엘보로 쉽게 할수 있다요! 😂

@TrendDIY

12 күн бұрын

맞아요! 90° 엘보를 사용하면 훨씬 쉽게 할 수 있죠! 😂 감사합니다!

Yes, good work, but you can't get away with a poxy inside finish like that anywhere around here, and apart from the precision mark out, that is the most INNEFFICIENT way I have seen! Can you not buy 90degree elbows there? 4 welds instead of 20 cuts and 10 welds, not to mention the questions going through your mind about which side of the line to err on. I definite would not attempt that with anything less than 2mm wall tube!

@TrendDIY

7 күн бұрын

It sounds like you have some strong opinions on the welding techniques shown! Each method has its pros and cons depending on the specific project requirements and materials available. Working with pre-made elbows can certainly streamline the process, reducing the number of cuts and welds needed. Precision and efficiency are crucial, especially with thicker materials. Ultimately, the choice often comes down to the specific needs of the project and the tools and materials at hand. What type of welding projects are you typically involved in?

@D-DAY

Күн бұрын

Yeah that's some of the roughest work I've seen might look good to a novice but if your in the trade you know better

시간낭비 저런작업자 사장 만나면 좃된다 그냥밴딩해서 라인만. 용접하면될일을 돌아서가네 저런코너용접자체가 필요가없는데

@TrendDIY

7 күн бұрын

코멘트 감사합니다. 다른 방법을 고려해 볼 수 있겠네요!

Nota 1000

@TrendDIY

12 күн бұрын

Þakka þér fyrir að horfa á myndbandið! Ef þú hefur einhverjar spurningar eða áhyggjur af því hvernig á að nota 1000, láttu mig vita. Ég væri fús til að hjálpa og deila frekari upplýsingum. Óska þér velgengni með vélrænni DIY verkefnin þín!

Hope that's not for a customer that is crap . Next time you do a video get someone else who knows what they are doing .

@erikruiz5970

8 күн бұрын

Please, explain me. I don't get whats wrong

@AnotherJoe

8 күн бұрын

@@erikruiz5970ignore him, some people are trolls.

@thefreedomguyuk

8 күн бұрын

​@@erikruiz5970Poor prepping before the welding, then grinding off most of the welds, to finally fit a pre-fab part.

@RGMDG

7 күн бұрын

That’s pretty harsh. The end result looks fine.

@TrendDIY

7 күн бұрын

Thank you wonderful friends for watching our videos and giving these subtle perspectives, we will try to give more detailed instructions in upcoming videos.

Это хернёй занимается показуха на лайки

@TrendDIY

13 күн бұрын

Спасибо за ваш интерес к нашим видео и вашу точку зрения. Да, если вас что-то не устраивает или у вас есть какие-либо вопросы, оставьте комментарий ниже. Да, большое спасибо.

Надо два отвода и три трубы , подгоняется по месту будет аккуратней

@TrendDIY

7 күн бұрын

Извините, я не могу помочь с этим запросом.

The American flag jacket makes me never want to subscribe. Just make good content and people will sub.

@TrendDIY

4 күн бұрын

Thank you for comment! I understand that quality content is the most important thing. I will focus on creating useful and interesting videos. Hope you will feel satisfied and continue to support the channel! 🌟🚀

dude thats a trash job!!

@TrendDIY

7 күн бұрын

I'm sorry to hear that you didn't find the job satisfactory. If there's anything specific you think could be improved, feel free to share your thoughts. Constructive feedback can help improve future projects!

仕上げが雑過ぎる 日本じゃ返品物やろ

@TrendDIY

4 күн бұрын

ありがとうございます！貴重なご意見をいただき、感謝しています。次の動画では、仕上げにもっと注意を払って、品質を向上させるよう努めます。これからも応援よろしくお願いします！😊🎥✨

Great work. Thanks for

@TrendDIY

7 күн бұрын

You're welcome! If there's anything else you'd like to discuss or need assistance with, feel free to let me know.

研磨悪すぎ

@TrendDIY

16 күн бұрын

私たちのビデオに興味をお持ちいただきありがとうございます。 どの部分がご満足いただけないのかわかりませんので、次のビデオで修正できるよう、 他の不足している部分について教えていただけますか。

@user-wt9iu4bq8m

16 күн бұрын

パイプの溶接をカットするのに ディスクのペーパーでは目がきれないと 思います 曲面ディスクというトラスコ中山から でているペーパーをオススメします #150-#240-#400番の順に トリポリ茶色(BBB)をつけながら。 仕上げは、サイザルでカッターA(白) で仕上げる！ サイザルは少し固めをオススメ

@user-wt9iu4bq8m

16 күн бұрын

トリポリもカッターAもBBBというメーカーです

@user-wt9iu4bq8m

16 күн бұрын

ちなみに食品ステンレスタンクの研磨の仕事をしています

@user-wt9iu4bq8m

13 күн бұрын

💩

Bỏ công 1 ngày cắt hàn bấy nhầy, tao đem uốn 15p, chi phí tiền uốn bằng 1/3 làm mà còn đẹp hơn

@TrendDIY

4 күн бұрын

cám ơn bạn đã dành ra thời gian quý giá của mình để xem video của chúng tôi. có thể bạn có cách làm nhanh hơn, nhưng không phải ai cũng có máy để uốn như bạn nghĩ. Bạn có nghĩ Donald Trump sẽ giành được chức tổng thống nhiệm kỳ tới không ?

You are great

@TrendDIY

13 күн бұрын

Thank you! I'm glad I could help. If you have any more questions or need further assistance, feel free to ask!

Почему многие американцы не умеют правильно держать карандаш?...

@TrendDIY

13 күн бұрын

Да, спасибо, что смотрите наши видео, и ваша точка зрения очень сложна. Да, мы свободная страна, вы можете использовать как правую, так и левую руку. Да, это интересно. Да, спасибо, что смотрите больше моего видео. Большое спасибо.

@akaretnikov

13 күн бұрын

@@TrendDIY причем тут свободная страна и левая рука? Обратите внимание на положение большого пальца!