kzread.info/dash/bejne/nWZksdmvkcy-Z5M.html Drone Lovers Must Watch, Guaranteed Worth to Watch Full Comparison, New 2021 DJi Air 2s VS New Hubsan Zino 2 4k UHD Camera

@kawaryamuzamiru1687

2 жыл бұрын

Hi sir I need you Number thanks

Thanks for shearing your knowledge with needy peoples Great job.

Your explanation is greatttttttttt, im new into this, thanks for your video

Very helpful and great experience. Thank you

very good information with full details

very nice, thanks for sharing

Very good information.

@universalinformationentert3976

4 жыл бұрын

please subscribe channel, and like the video, thanks. 07446191131

Thanks for this vid

Very helpful

Great video.

@universalinformationentert3976

3 жыл бұрын

Glad you enjoyed it

kzread.info/dash/bejne/Y6eNpM1uiaaddag.html Perfect Camera Review between SG906 Beast Pro Drone Xiaomi Fimi x8 SE Drone 1080 HD Flown together

Thank you for the useful video but would you please tell me when you read the file in which format you save it thank you

Hi thanks for such a informative video very well presented and absorbed by me who still new to this field. Can you tell me exactly what hardware kess with version number and software is needed to venture into to this field Will this work on a mercedes sprinter 518 cdi 3.00 to remove dpf and egr Thanks in advance and be safe

I read a comment mentioning you're son who does these types of things is very busy nowdays , so when hes free is he able to explan how the tune data works is it a pretuned map for it downloaded elsewhere or can you tune it yourself etc

Hi there, when choosing a vehicle does the ECU only have to match? What about the year difference?

could i use this to also make custom maps for corsa C vehicles? for example. copy ECU file from z16xe engine and flash that to my z16xe swapped corsa with z14xe programming currently?

Very great video….. I can only see writing option but no reading for my ECU are there any special instructions? VEHICLE is toyot hilux D4D 2015 KUB 26

When it says turn the dashboard off, this is not the ignition? Other sites say, it's the light that turns on the light in the dashboard.

When you read the file and save it on computer you can close Kess and work on the file ? It’s like you copy the Ecu file and you can still drive the car or the car Ecu is empty and you must write again ?

Did the Kess require an online subscription? I want to be able to replace ECUs on Mercedes with good used ones through the OBDII connector and if this is not possible do it directly at the ECM. Thanks! This video was helpful but let me know what you think is the best way and if what I want to do is possible.

@universalinformationentert3976

3 жыл бұрын

No need

Im wanting to tune my cailber srt4 with this, would it be possible to tune it and adjust things like my fuel and my turbo boost?

I'm a little confused about this kess 2 my question is this I have an vr6 r32 golf which I'm fitting a turbo to it can this kess 2 add a turbo tune on the original me7.1.1 ecu?

how do you know which vehicle it will work on? is it by obd? i have a tool now where i need to remove the old TCM, read the data, then load everything into the new TCM (2006 benz c230) and still do more programming on the vehicle once installed, can i do it all by OBD with kess? Thank you.

Hi, I am new; thanks for the film. W hat if the chassi number is wrong? what is the way to correct it? thanks for your replay.

where do i get the files from?

Hello I'm after working out what I can go to on stage one of a vauxhall astra 2010 1.7cdti. I'm looking for calculators and I'm not sure if there is any decent mod file out there it is the 125hp version

wow! it's work in opel Astra ?

that ECU can I use it in a honda d15b turbo engine?

Hi , i tried to remap a corsa d 1.3 cdti 2011 today but i get wake up error and I had the same ecu selected as you did . How could I fix the error?

Przyjacielu powiedz mi czy takim czym jak kess da radę zrobić sterownik 1:1 od astry g 1.8 benzyna simens 5wk9 padł mi i chciałem coś samemu zrobić ale pytanie jak.😊

Hi, I'm Mon from the Philippines. I just want to know how you do. would you please tell me where I can get full remapping online training?

Did you use a copy of the transponder? Kind regards

Hi i want do immob off on me7.5 ecu cant decide on ktag or kess i see you have both what would you recommend

were you using the original kess v2 or the copy?

Hi I'm new in this software can you please tell me how to remove dpf with kess and how do I get original file to remove dpf, just start using the kess v2

hello has the modified software read out with the ecu and the car will continue to work? copy the modified one?

Hi. What if my car model does not appear in the car list? can I select by ECU model? Can you upload a video? Thanks!

What if your car doesn’t show up in the cars I am trying to find 2005 Nissan Frontier and 2004 Nissan 350z

what do you do if you see all windows empty but SW upd: and vin ???? how do you restore computer to original condition ?

what program did you use to remove EGR bro ???

👌

congratulations great video, could you tell me if with the kess it is possible to read and write a control unit opel tigra 1.4 16v of 1996 delco multeck s (f) via obd2, I registered in your channel, I will see if you have something for me, thanks in advance

Is immo included at orginal fill ??

hi there i have the same kess but i need the image fie for the sd card insde if any 1 can help tks

If you have a Corsa with a damaged cpu, can you mount a secondhand cpu and will it start? Or what would be the best procedure to get this running again, with or without this KESS-tool?

@universalinformationentert3976

3 жыл бұрын

you will have to copy eeprom data to new one, also part numbers has to be same, thanks

@roznovanuioan8680

3 жыл бұрын

u have 2 metods, 1 u clone the ecu eeprom, or u move the eeprom fizical from the damage, if dont work to read the damage ecu

Hello, could you help me and check if the your kess has the protocol for a Claas Lexion combine 2018, it comes with an Mercedes OM502 LA ecu, same as Actron Trucks. It would help me before I order the Kess. They say it won’t read this type of ECUs?.

@roznovanuioan8680

3 жыл бұрын

some ecu is need ktag

HELP ME"( univocal id not possible)"

Did you connect to OBD2 or did you have to pull the ECU out from the engine bay and connect it in a more difficult manner?

@paulfeugaing1339

Жыл бұрын

No

Can you program a new ECU?

Hi . out of interest i have been using my old windows 7 laptop with jsuite 2.47 and the newer 2.5 ksuite. The questin for everybody is. I thought i would load the software on my newer dell wibdiws 10 laptop and found no issues reading my audi ecu. Is there something i dont know why no one else usess w10?

@roznovanuioan8680

3 жыл бұрын

keep the win 7 , if the work ok, the win 10 may not work corectly, and when u write at ecu if give some error on boot write , your ecu is out ,

Great video. One question, why is there a need to ID the car and save the information with such a descriptive title when you only use the ‘read’ original file? I’ve just got one of these and can’t wait to use it. Thanks!

@universalinformationentert3976

4 жыл бұрын

its better if you are doing many cars,

Comprei o kess e ktag más não consegui em carro nenhum,sempre aparece algum tipo de error

Hello, thanks for sharing this video! I have a question about Kess... Does it read Insignia 1.8 petrol (E83 Ac Delco ECU), I'd like to read and save the original file form my car.

@ghanwa222

3 жыл бұрын

It should do. Yes

@adomas1074

3 жыл бұрын

There should be no problem with reading most ecu's, it is writing when using obd can be a bit problematic

When you remap do you also remove the egr?

@universalinformationentert3976

2 жыл бұрын

yes

Swift dzire speed lock unlock your requirements sir

*Can anybody explain the difference between a Master & a Slave? Thanks in advance.*

What about sumcheck? And where do you get editet files with egr and pdf off? Thx.

@universalinformationentert3976

4 жыл бұрын

we can do it for you if you wish, you need to send us file, 07446191131, thanks

@ganeshgaikwad3659

3 жыл бұрын

@@universalinformationentert3976 county code

How to read and save ecu on honda motorcycle

Can it read and save original stock ecu file of any motorcycle?

@PH-x

3 жыл бұрын

If its available in the vehicle's supported in the list there are many so I assume so but I do not know if you can save data from the ecu yet as I do not own one of these yet

Hi am Paul from Kenya i need kess it's how much

How can I get a good kess not a knock off

Can we diagnostic with this kess v2 ..?

@universalinformationentert3976

3 жыл бұрын

sorry, you can only work with ecu to get file to amend . no diagnostic function available in this software. thanks

Where do you get writing file from?

@universalinformationentert3976

4 жыл бұрын

we can make it , but you need it send us original file, please subscribe to our channel.

@roznovanuioan8680

3 жыл бұрын

u extract the orig file , and them u modify with ecm titanium

@Jamie-pv8tg

3 жыл бұрын

@@universalinformationentert3976 how can I contact use about files ?

Who can activate my machine id?

Hey man looking for help wondering if you can contact me

tenko

Is this original or fake Kess?

Just a question where did you get the modified file from? If I buy a kess v2 master where do I get those files from?

@addda1899

2 жыл бұрын

Have you found the answer i was wondering the same thing

@kennethhansen2535

2 жыл бұрын

@@addda1899 maybe in Germany 🇩🇪 but haven't tried yet

@addda1899

2 жыл бұрын

@@kennethhansen2535 im really suprised how less material is on the internet for remapping, yeah getting the files isnt hard but i want to learn to create them by myself.

@kennethhansen2535

2 жыл бұрын

@@addda1899 it will take some time to learn that🙂

@addda1899

2 жыл бұрын

@@kennethhansen2535 just bought kess today thats a good a way to go,one day hopefully🤣

Is this original Kess V2? Or chinese clone? May I ask how much did you pay for it?

Was interested but that fucking music, went to find another tutorial

Comment faire pour avoir ?

@universalinformationentert3976

2 жыл бұрын

ebay

@paulfeugaing1339

Жыл бұрын

@@universalinformationentert3976 aliespress

Can't watch instructions with music playing.

@universalinformationentert3976

2 жыл бұрын

really sorry for this time,

I have a 2012 2.0 tdi and china kess is useless

@roznovanuioan8680

3 жыл бұрын

some ecu need ktag to read

would be better without the music

The music sucks

why this infernal music? It's abusive, and is too painful to make it worth it. fml and this music.

Get rid of that stupid background music i can't hear efing word!!

Nice way to make a buck or two in your free time flash tuning peoples car in their drive way

What a horrible music, make me headache till the end 😪

Hi. What if my car model does not appear in the car list? can I select by ECU model? Can you upload a video? Thanks!