This is one of the best instructional videos I've ever watched. You explained everything well and even provided tips and cautions. Thank you

You may be the only one on KZread who actually showed how it works in detail. Preciate it

This video is a masterclass in how to show the function of a product. Thanks for your patience and attention to detail.

Thank you so much. I have watched so many videos that do not show the most important part, how they line up. It’s dumbfounding to me how people put these videos out without showing how they line up. They leave out the whole purpose of what a dowel is used for, lineup… thanks for the video, I have a much better idea of what I will buy. Btw, it’s completely different from a pocket hole jig.

Super clear and easy to understand. Watching this video, I had more than one "Holy crap, I didn't know it could do that!" moments. Thank you 👍

Very thorough tutorial. Thank you!

This jig looks amazing! Thanks for the review. Gonna buy it.

I just bought this jig and been wanting to use it and your video was a great demonstration on how to use it. You managed to show all three types of connections very nicely, good job.

Great video and well explained, thank you. I am considering using dowels for a couple of the joints in my next project.

Thanks for posting the link. I just bought one to add a shelf to my Dutch door. You just saved me a lot of money!

I really enjoyed your video and in my opinion you covered everything. I just got my Milescraft 1319 a few hours ago and I was so frustrated with their instructions that I gave up on doing what I have planned to do however, after watching multiple videos I bumped into your and I will give it another try tomorrow. I really enjoyed that you took the time and explained how to do the measurements for all three types of joints. Thanks for the video.

Thank you for the very well and detailed explanations. Makes perfect sense how to use it now.

Thank you. I bought mine and haven't used it yet. This video cleared up some questions for me. Much appreciated!!

Great video. Thank you sir. Much easier to follow than some of the others.

I have this, the older green version, for at least 10 years and used it extensively. It works really well and i made a lot of dowel connections with it. Once you are skilled with this tool, nothing beats the speed and precise working.

Bought this a while back. Haven't used it yet. It's on my list this week.

This is the best demo of the jig I have seen. Thanks.

I have just purchased a wolfcraft dowel jig (apparently, the old version) which is pretty similar to this one. As the new improved "wolfcraft dowel master jig" is on the market and my version is the "older" one, nobody has made a video for it .Your video was a massive help. Thanks for a good, concise video.

Thank you. Very useful. I have some other kind of dowelling jig, but no-one on KZread seems to have the same one.

Great explanation, much easier to follow than the Wolfcraft video for the dowelmaster I saw! Interesting to see you drilling the first holes on the horizontal, most videos I have seen have the first holes in the vertical axis.

Just got one can’t wait to use it.

Very good and detailed explanation. Thank you!

I watched a few videos on this. Yours is the best and easy to follow. Thank you!!!

Good job explaining this.

Awesome video. I bought the jig but had no idea how to use it so did it freehand!

Many thanks for you easy to understand video, I have had one of these jigs for ages and not used as I couldn't come to grips with the set up,used it today on a table top, perfect result, I bought mine from Tool Station and very cheap. Thanks again.

Hey dude, thanks for the video. Exactly what I needed to know, going to pick one up today.

You did a good job getting to the point fast most of us benefit from this to learn fast too Well Done jv

I enjoyed your video. Thank you for sharing it. I appreciate your honesty about the good AND bad points (including the limitations) of the jig. For all you've done for the company with this video, they should easily be willing to replace the jig without a doubt.

Awesome demonstration! Thank you!

Awesome video - thanks for posting!

Awesome demonstration

Fantastiv video! I have watched many and you made it so understandable!

Great tutorial. I have one of these cool jigs, and it does work extremely well. I also have the "dowel it" jig which is great for edge to edge joinery. The only thing I have to say, and this is not a criticism, is that you keep referring to the Milescraft doweling jig as cheap. Maybe you should say inexpensive. When one thinks of cheap, they think of (at least I do) something that is poorly made and will not last. Even though most of the material of this jig is plastic, it is a high density plastic, and should last years if taken care of. This jig in my opinion is an indispensable, inexpensive little tool that everyone should have in their tool arsenal. Thanks again for the great tutorial.

Great video and thanks! I picked one of these up on sale for like $15 for the kit! Great buy

Brilliantly explained.

Thank you. I had no idea of some of the functions. Great video, thank you. Xx

Very well explained! Thanks man!

Great demo and tutorial.

Straightforward vid. Thanks.

Thank you. Best video about this tool I ve seen so far

Hello just want to say to you big thank the explaned how dowel tip very clear and show up close welll done mate cheers

Very informative! Thanks! Needed to know how to use my new tool and your vid was the first I found.

Thank you, great honest review

Thanks man !!! This is good info for beginners like me ...thanks a million !!

simple clear and to the point ... Thank you -- subscribed and liked

You are a legend. Excellent video. Answered some questions I had. Many thanks. Unfortunately most videos on KZread are complete waste of time. Btw just a little tip in the end of your video for the drills you can make very simply stop collars from a piece of wood.

Nice vid, bro! This helps me a lot, thanks!

Thank you buddy, just brought one and wanted a quick guide, most guides only do one type of joint, which was the angle one.

By far the best video on dowel joinery on YT! Fantastic. (The audio wasn't too good though). 😀

Well explained, great video

THANK YOU!!!! you made this very easy to understand and spoke very clearly. Appreciate it Bud. - Cheers.

Thanks for your video! I watched it twice to understand how you can use it! I got a similar one from Wolfcraft and I am doing a cabinet project, you make it look so easy :-) I was reading the manual, but the English has errors in it and I could not understand it all how to use it, your video helped a lot, thank you!

very helpful video, thank you.

wow that was a great vid! didnt know dowel jig could be so easy!!

The best explanation o n line going to get a jig tonight on anazon

fantastic video, thanks very much!!!

Lovely vid, very clear thank you so much really helpful x

Excellent video thank you

Really helpful, thank you!

Thanks for sharing this video, help a lot 👍👍

I think a work around for smaller stock is using that centering line, it just may be tough to hold against your workpiece, but add an extension piece next to it for balance.

Great video ! Thanks .

Excellent video, thank you! And yes at 25 dollars, its the best bang for you buck!

Great Video!

Excellent video. I just subscribed.

I've had one of these sitting in a drawer for over a year, never bothered with it. Watched your video once and made a flush test joint on the first try. Thanks!

Good job on the video it was just what I was looking for. I actually bought the same jig last year. Now I’m finally planning a project where I need it. Maybe I’ll tie string to it and hang from neck so I won’t drop it. If you think you will do a lot of dowel joints maybe it would be worthwhile to step up to a metal one.

Nice review. I was curious how this worked.

Nice job 👍

Nice review and video, Might add the centering plugs and their use as well.

Very helpful. Thanks

Great video

thanks for the great info

Excelente explicación, gracias!!

Good video. I just got one of these for $11 off Grizzly. Looks like it can do 90% of what other dowel jigs that cost 10x as much.

I have this little jig and for the price, it is very good. Furthermore, if you see that Dowling is for you, then one can always purchase a make like : Task or Dowel Max, much more expensive, but also more versatile. Cheers from Canada, Polar Bear country.

Good video thanks for sharing

I would recommend looking at the supplied drill bits closely before trying to use them. Mine were quite wobbly which made the dowel holes bigger and reduced the precision when joining.

One other thing, for the broken pin, just use some super strong epoxy with an accelerator. Hold it down for a few minutes and you should be good. Most epoxies work really well on plastic parts like that.

I also dropped mine and broke off a peg. I used a small machine thread bolt to reattach it and it works fine.

Great quality video, my only disappointment is that you seemed to have stopped making more content! Can I request a shop tour, I have just hit subscribe.

Thank you for your video. I appreciate your time and effort ! Cheers from Canada, Polar Bear country.

Great vid

excellent. thanks!

I just got my kit from Amazon yesterday today went to use it was going great and knocked it off my 36in high work table to concrete floor and snapped one alignment ear off smooth at base. This jig is user friendly after a small learning curve but its not durable by any means.

@davbeck2835

3 жыл бұрын

The same thing happened to mine! The good news is that if you contact the company they will send you a replacement at no charge.

Your centering can be solved by taking a wider board and drilling and installing one dowel. Then put your fence on and adjust it so it's setting the depth. Now take it to the board you want to use it on and use the fence to put it to center and drill the hole(s) where you want.

Thank you 👍🏻

I broke the pin too when I dropped it. I fixed it by applying a bit of pvc cement. Make sure to dry fit it before putting on the glue so it's still accurate

Two sets of drill bits makes sense ... but what we _really_ need is just single additional bits. I know I can get individual twist drill bits (for metal, and less precise wood work) on cards at my local Ace Hardware store, but I have never seen brad point bits for precise woodworking there. The only way I know to get the collars, though, is to buy a full set ... bummer.

Great demo, mate, 👍🏽 bummer that you dropped it and broke the peg off. How did you go with contacting the company, get a replacement? Maybe the issue with the minimum width of board, one work around that should work to get evenly spaced holes not too close together, is to clamp another wider board to it so it extends the width for better jig positioning? Can't hurt to give it a go, it should work, well, in my head it does! 😆😆😆

A dowel jig can be just as fast as a domino and is a lot less expensive. Plus you can make different sized dowel joints easily and cheaply. Fast sting and effective, dowels are a under appreciated method of joinery.

Volume is NOT great but this is a helpful video....thank you.

Can you do a 45 degree bevel or miter dowel joint with this jig?

How do you use it to put boards edge to edge ???

I am trying to butt joint 2 x 3 with dowels. This wouldn't work right?

How many times have folks done edge to edge joints?

I used it and you dont need center pins acctually, so there is no width limitations really. Just mark center where you wonna pin to be and drill by eye centered pin. It will be 99% accurate.

You don't have to use the pins to center a dowel in the end of a board, do you? Couldn't you also use the adjustable fence?

@GraemePayne1967Marine

Жыл бұрын

Yes, you /can/ use the fence to center the holes in the end or edge of a board, but it is much less precise. The geometry of the pins and holes on this and similar jigs ensures that the dowel hole WILL be centered on the end or edge of the board. However, neither the pins or the fence help if you want to edge-glue one board to the face of another. However, edge-to-edge, end-to-end and end-to-edge are the most frequent ways of using dowels - precisely where these jigs are most useful. The other way to locate the "other" holes is by using "dowel centers". That is the way I learned in high school shop class in the mid-1960's. A dowel center is a metal device that has one end sized for a perfect fit in the hole, and has a perfectly centered point on the other end. They are usually available from woodworking suppliers in sets covering the most common dowel sizes. Once the dowel holes are drilled in one board, the dowel centers are inserted and the other board is pressed up against them. The dowel centers in the first board make pinholes in the other. The pinholes mark the centers of the holes to drill. You still have to manually drill the remaining holes perfectly square to the surface and to the correct depth, but at least you have a precise place for the drill bit tip.Doing it this way is necessary if you want to edge-glue or end-glue one board to the face of another.

Have you tried on 2x4 boards?