HOW TO USE A RAMSET GUN
Тәжірибелік нұсқаулар және стиль
Learn how to use a ramset gun, also called a hilti gun, to nail into concrete and steel. Featuring the Hilti DX 2.
Sign up for the email list. Grab some great tools and supplies while supporting the channel @:
www.caliber8.com
Best picture hanging tool:
www.exactac.com
#Caliber8Tools #hilti #construction
Пікірлер: 74
Thanks a lot sir , your explanation was so good, i learned lot of information from your video, very nice work
@Caliber8Tools
8 ай бұрын
Thank you, glad it helped.
Enlightening, well cut, and true. Good job 😊
Thanking for taking the time to post this...
@Caliber8Tools
2 жыл бұрын
Glad it helped.
Great video sir, just what I needed.
@Caliber8Tools
Жыл бұрын
Glad it helped.
Amazing video.... Thanks for creating. Friday, May 10, 2024
@Caliber8Tools
Ай бұрын
Thank you. Glad it helped.
Thanks I need all that information I enjoy all your videos stay safe my friend 👍🏾
@Caliber8Tools
2 жыл бұрын
Thank you. Be safe as well.
thank you man great lesson
@Caliber8Tools
3 ай бұрын
You’re welcome. Glad it helped.
you explanation made me feel more comfortable with this tool, thanks
@Caliber8Tools
Жыл бұрын
Glad it helped.
Very good explanation
Best video on the subject. Nice and thorough. Thanks. I had no idea those nails could go through steel. Damn!
@Caliber8Tools
6 ай бұрын
Glad it helped.
Great Job man!
@Caliber8Tools
2 жыл бұрын
Thank you.
Very good instructions!
@Caliber8Tools
12 күн бұрын
Glad it helped.
What a fantastic explanation. Great video. I appreciate it. 👊🏻
@Caliber8Tools
4 ай бұрын
Glad it helped.
Thanks for your show and information
@Caliber8Tools
2 жыл бұрын
You’re welcome.
Great and well done video
@Caliber8Tools
13 күн бұрын
Thank you. Glad it helped.
Excellent video
@Caliber8Tools
Жыл бұрын
Glad it helped
Thank you so much for an easy to understand and comprehensive guided instruction on how to use my tool. Your knowledge is greatly appreciated!
@Caliber8Tools
7 ай бұрын
Glad it helped.
Thank you for the video sir! I’ll be using one for the first time and I truly wasn’t sure how it works
@Caliber8Tools
9 ай бұрын
Glad it helped
Nice job.
@Caliber8Tools
Жыл бұрын
Glad it helped.
thank you
@Caliber8Tools
8 ай бұрын
Glad it helped.
Thank you for making this! This is exactly what I was looking for!
@Caliber8Tools
3 жыл бұрын
Glad it helped.
Excellent presentation! Safety first and sharing the associated parameters metrics was first rate. Well done. Thank you
@Caliber8Tools
Жыл бұрын
Thank you. Glad it helped.
Thanks for the video it was great on how to use the gun . But the heat treating makes the metal nails harder not resistant to heat
@Caliber8Tools
5 ай бұрын
Glad it helped.
Great video! I have the Ramset gun. Need the fasteners and loads. Application: secure 2"x2" board to brick piers that support my back deck. Once secured I want to attached lattice to the boards to fill in gap between piers. To do that, based on this video, used the GREEN powder loads with 3" orange fasteners? Thanks!
@Caliber8Tools
Жыл бұрын
That’s about right.
Thanks for the Content Bruh. Although ive probably driven 1k of these fasteners over the years ~ I just bought a new .27 cal version & its a good reminder for safety protocols ~ if a 16 can come back at U from a Nail gun.... A Ramset nail could do the same ... its Never Happened to me ~ But my new Tool does have a lot of Kick to it ~ So thanks....
@Caliber8Tools
10 ай бұрын
Anytime. Glad it helped.
I'm interested in fastening some simpson L brackets to the 1/4" flange of a large steel I-beam. The brackets would be then be screwed to joists that the beam will support. The brackets will not bear weight, only lateral forces. Would this work for my application?
@Caliber8Tools
2 жыл бұрын
Yes it would.
I would like to mount 1/2 plywood to a brick interior wall. about 6 or 7 plywood sheets. Can you mount these with pns that wont have the rubber exposed on the pins? I could use tapcons but it would be more painful. thx.
@Caliber8Tools
7 ай бұрын
As long as the pin heads are big enough to keep the plywood on the wall.
Have used on site before but was not given as comprehensive an instruction before use as this video, thank you for posting
@Caliber8Tools
2 жыл бұрын
Glad it helped.
Can it be used to fix fibre glass composite to concrete piles underwater
@Caliber8Tools
2 жыл бұрын
They do have underwater ramset style fasteners that can be used on fiberglass.
Can you use the ramset to anchor a fence bracket to concrete?
@Caliber8Tools
Жыл бұрын
Yes.
As a woman that doesn't know what shes doing... this video was helpful. I was recommend to use one of these to cover the vents in the crawlspace of my home with hardware cloth to keep out rodents. I have 23+ to cover. Any advice?
@Caliber8Tools
Жыл бұрын
A ramset gun is good if you are going to be attaching the cloth to concrete. If you are attaching it to wood use a heavy duty stapler
Could I shoot it upward? To attach wood to concrete
@Caliber8Tools
Жыл бұрын
Yes.
I want machine
You stayed 3" away from the left and right side of the concrete, but not the top and the bottom. Can you elaborate on the restrictions?
@Caliber8Tools
2 жыл бұрын
You’re right. I should’ve specified the top and bottom edges. I simply pointed out the left and right edges for the sake of instruction based on the prop I used. Good catch.
@vintagepowderactuatedtools9036
Жыл бұрын
Same spacing to top and bottom. Fasteners should always be at least 3 inches apart.
What about using it to fasten thin material to a concrete block wall? I'm guessing the fastener would penetrate the wall. Is that okay?
@Caliber8Tools
2 жыл бұрын
It would penetrate the wall.
It's way too slow
@Caliber8Tools
Жыл бұрын
Is it, compared to what?
@sciCHD
Жыл бұрын
@@Caliber8Tools Spit Pulsa 800+ (Gaz 1battery). 2 round per second 1000 round an hour, 50 nails charger, 100 joules power up to 40mm nails. kzread.info/dash/bejne/epilusptirSvmKQ.html
The board was cracked and the steel bent