I am the only one who hears Borat’s voice. It’s kinda funny when Borat learns you how to do something. 😃 but thanks for the video!

How did you get the buttons to work

Hi! A questions, the new air bag that you put on, it works in case of accident? Thanks for the video!

i wold love a video on how to restore the steering wheel

Hi, do you maybe have an idea how to do swap from single to dual stage? My car is '97 and I am seeing a lot of info that the steering wheel you used (and that is the one I want) is the dual stage, but there is no explanation on what is the difference and will it work...

Did the multifunction on steering wheel work? I wanna do a swap so i wanna ask, if i can buy the better one and connect the multifunction. Thx

i'm trying to replace my wheel from my 04 325. i have the 4 prong wheel tho that is kinda boxy. please do post the restoration vid tho!

@carartisan

Жыл бұрын

process is very similar for the 4 prong wheel too! Thanks, I'll try to make it!

Hey dude how can I buy one of these steering wheels?

Hi you said to subscribe to know how to wrapping a steering wheel and make it new again with its plastic cover. The paint you use and all the step by step. I want to trust you as well because I just have subscribed your channel. It is really interesting cause I'm gonna do the same to my MFL Steering wheel that I bought early. See you on youtube myfriend. 🙂

Does the buttons work?

Does anyone have a part number for the male end of the 2 695 146 1 connector cable? I want to move the cruise control buttons to the dash or centre console because I've installed my Sparco steering wheel onto my E39. I want to make it reversable, so I don't want to cut off the original connector in the collum, but to be able to do that I need the male end of that connector. (BMW 6 377 236 or AMP 968813-2B)

Hey. Didnt you need to retrofit/code the buttons to work? Because on your old wheel you had no multifunction buttons. ? Thanks

@carartisan

Жыл бұрын

Hi! Yes, I needed to play with some wiring to make the buttons work. I didn't do it, because it was done last time, before i removed this steering wheel for a new leather wrap

@Algis95

Жыл бұрын

@@carartisan Nice, is there a video in the plans explaining the wiring and/or the new steering wheel refurbish ? :)

@DavidePog

Жыл бұрын

@@carartisan hi! Did you do a video of how make to work the buttons, from the old and the new?

@humbertholzmann674

Жыл бұрын

@@DavidePog kzread.info/dash/bejne/l3hnzJOPdrCTlLw.html here it is. You are welcome

Yes, show how to renew the steering wheel with new sewn leather cover.

@carartisan

Жыл бұрын

Subscribe so you don't miss it!

Hey just did same upgrade and i got airbag light that won’t go away, i tried clearing the code but it keeps coming back i had the same old wheel but with buttons

@carartisan

Жыл бұрын

Did you properly connect all the conectors? Check if the wires are intact. If everything is good then airbag light should go away if you clear the codes. The airbag light doesnt even come up if you don't connect the battery while the airbag is disconnected

Io ho fatto la cosa opposta

Does the buttons work?

@carartisan

Жыл бұрын

Yes, the buttons do work

@bekirsenturkk

Жыл бұрын

@@carartisan Do I need to do anything extra for the buttons to work? Does it work when connected like this.

@klemenbrcar551

Ай бұрын

@@bekirsenturkk same here wanna know if it work... Did u alredy do it? does your work without any problems? thank you