Creative channel I can't believe how much you're channel has grown I remember when u had 100k

I cried when you drove paddles on the street

@noahsohl5071

7 жыл бұрын

limitless rc I fucking cringed.... like what the hell?

@jaferlastname1760

7 жыл бұрын

limitless rc ikr like wtf

@neilbuckwildtrx

7 жыл бұрын

limitless rc yeah and they are on backwards too

@jacob4884

7 жыл бұрын

limitless rc seriously. And it looks like their on wrong too

@soarf9670

7 жыл бұрын

ikr

8:28 Three Hands

@duylehoang2312

6 жыл бұрын

it is his wife

@mrkabung1171

6 жыл бұрын

photos of wife pls

@zenewie3912

6 жыл бұрын

Duc Huy Luong hahah

@hypezar

6 жыл бұрын

Duc Huy Luong for educational research purpose.

@lancehogan2649

6 жыл бұрын

Ladies and Gentleemn! Its really cheap here: www.gearbest.com/rc-cars/pp_351315.html?lkid=12749668 I hope it'll be usefull! :)) kzread.info/dash/bejne/iHiA2cOuhpWamqQ.html

I did this mod with goolrc brushless and flysky transmitter. I have throttle set to 60% it's perfect, not to fast that it will break and with oil filled rear shocks it turns without rolling over. I love this mod. Thanks for posting. Fyi this mod only works with servo in his link. Normal servo is too big.

Really neat upgrade, super fast, however, Feiyue now make the FY-07 which is the same design, comes with a brushless system. Presumably this car will address the transmission problems mentioned in the comments below. Great video.

HI. Good work. I enjoyed the "balloon-tires" on max-speed..

Very informative video it would be good to make more of the same for Brushed cars such as Wltoys and Fs racing as a lot of people struggle to get the right parts and waste needed money

50 km/h / 2747 rpm = ~0,0182 4970 rpm * 0,0182 = ~90 km/h I don't really know if it's correct but I think it's logical.

@handucthang88

7 жыл бұрын

Prixo thank bro

@chandrapratama6025

7 жыл бұрын

Prixo it depends on the weight of the car, and the ampere of the motor

@sabrinadeberry5769

7 жыл бұрын

Prixo what does the 540 put out

@nickc6677

6 жыл бұрын

If you look at the test with the upgrades the circumference of the tyre increases at higher rpm's (due to centrifugal forces). The speed at 4970 rpm is probably significantly more than 90km/h.

@nathanpennell2309

6 жыл бұрын

nope

Hey creative channel I have been waiting for me to get that on me birthday but when I watched this I went to my local rc store and got the stuff

Improving things is always good.

That;s amazing bro!

Thanks for sharing this upgrade

10:34 that torque

@test1uci

5 жыл бұрын

engine on one side of the car is a mistake.

@ultek

2 жыл бұрын

@@test1uci this engine weighs 95g. I wonder if the 95g weight on the other side will shift the balance a bit. probably yes.

Love this video I’m did this to my car everything the some

Great. Thank you for the Information.

The wheel on the back of the car, is that a real replacement tire for the car?

@talal5716

7 жыл бұрын

YourAvgScientist Videos yes

@valerietan2918

5 жыл бұрын

Mattson McCraw yes it is, I have this and one of the tires popped of 😭😭😭 luckily I could replace it.😎😎

@Wasophangen

5 жыл бұрын

Upgrade alliexpress

@gerardjachymiak5822

4 жыл бұрын

100% yes

@josesimoes8568

3 жыл бұрын

Yes

good vid, plan on doing this to my a969

creative please tell me what servo you used cause i am doing a brushless upgrade and I cant figure which servo will work or fit the ones ive got have been the fatuba s3003 (too big and the micro sg 90 i think and its too week and small please help, thanks

putting aside if the upgrade is good for the car or not, great effort !

If anyone watching this vid is planning on upgrading their 12428 do NOT get the 2838 like this guy get the 3650 (I got racerstar but I’m sure any of the Brands off AliExpress are all the same goolrc, surpass, blmotor, ocday, etc.). I got both of the motors and the 2838 is much smaller than the original 540 motor and it gets hot when running in this car as well as the esc it comes with in the combo. The 2838 motor is also severely underpowered on the low end and will cog like crazy and won’t run right on slow start ups or when trying to crawl over stuff (ends up just sitting there cogging). The 3650 has none of those problems and is exactly the same size as the original 540 motor so it drops right in and the holes to the motor line up exactly with the motor mount holes without having to make custom holes like you have to on the 2838. Both motors have more top end power than this truck can handle well running on 3s but the 2838 has absolutely zero low end power so I highly suggest avoiding it and going with the 3650 combo that comes with the ESC.

@JacquesButcher

5 жыл бұрын

I wish I read your comment before buying the motor. I have very bad cogging problems now :-( Do you mind posting link to the motor you are suggesting? I found them but there seems to be a few KV ratings on them. Does the KV rating matter? I was going to buy the 5900 KV one from here www.banggood.com/Racerstar-3650-Motor-Brushless-Waterproof-Sensorless-110-RC-Car-Part-5900430039002300KV-p-1110570.html?rmmds=search&ID=518007&cur_warehouse=CN

@MrMikebeben

5 жыл бұрын

You’re going to get cogging with a sensorless motor. Sensored brushless is much better and get a program card to program your esc. Also buy components separate it’s much better than cheap kits. Also brushed is muchhh better for crawling because of slow speed control. Just my two cents and many years of rc fun

@AszBall

5 жыл бұрын

MrMikebeben - kinda missing the point bro, I was just warning people that the 2838 size motor in this video is underpowered on the low end to the point where you won’t get it running in thick grass, trying to start uphill, or if you’re up against an obstacle because the cogging is so bad. The 3650 on the other hand doesn’t have that problem. Yea it’ll cog a liiitle on the low low end but it doesn’t have problems getting going like the 2838. Also the holes will line up with the mount, and it won’t over heat in the 12428 which the 2838 size motor has all those issues and bad. And yes of course sensored is better but that comes with a higher price tag and possible issues on installation. Most sensored motors run CCW and sensored is non reversible unless the esc has a reverse rotation setting (which mostly higher cost ESCs are gonna be the ones with that setting) and the 12428 needs a CW running motor. I’ve overcome that issue with my sensored motor/esc by cutting out a plastic anti reverse tab in the diff housing and flipping the diffs in the housings which essentially reversed the direction the motor needs to spin to make the car run in the forward direction. That being said I understand the concept of brushless vs brushed and sensorless vs sensored, but the point I was trying to get across is that most people are just tryin to go faster without spending too much and the absolute best way to do that is a cheap ass Chinese 3650 motor/esc combo and that the 2838 in this video is junk. The focus being on budget otherwise I coulda have also commented yea just get a $300 sensored setup it’ll run better. I mean duh but who is lookin to spend that much on a $70 car? Everything you said is correct just not sure it was 100% relevant to what I was trying to say or to the point of this video either(which is super cheap brushless power).

Molto bello l’ upgrade alla Wltoys

Hi what servo did you used? (All the other parts ordered)

Great video man 👍👍

quick question.....where do you fit the lights in all this? any possible way to adapt them to this configuration and work? the old ESC had this...this new one does not have..any suggestions? Thank you

Nice , good video

Awsome got to do me one the same way.thanks for all the info

just subbed i like what you do

Pretty sick

Basically you only need the motor, esc and battery to run this quick right ? The servo and transmitter are basically for better handling ? Or no ?

Good job! really nice upgrade.... can you suggest a upgrade for rc HB P1003 rock crawler...I like the transmitter that you used... but I don't know which ESC and servo will match

is there metal differentials i can buy cause mine were going out before i upgraded the plastic ones suck

How long do those upgraded batteries last ?

Can you make a video about how to upgrade the 12423 WLtoys cross country truck?

did he already do a video on filling the shocks with oil?

Hi cap.. were did u buy all of ur materials?? the controller,, and the batteries?? thanks..

I wish someone would help me with Ideas for this boat im getting a UDI 009 ... Wanna go brushless, how easy is it?

Dude, I love this car. I was surprised that i already came with a bigger motor vs the fy03. What would it take for me to use a 2838 6200kv motor for my rc? I think I have it but I just want to verify your thoughts.

Great

Anyone 2021 still watching these Wonderful video ❤️

Can you please tell me that what are the equipment that you used to upgrade your 4wd across car

super job

Great Job 👍

Hi. Great work. But tell me, why so much dead zone between throttle and brake? Is it because of the ESC quality, or the Motor?

For this upgrade all the gear inside the transmission should be of metal for the longer life!

@TerminatorFRA

4 жыл бұрын

It was also my thinking and was looking for a comment like yours.

@dogspit959

4 жыл бұрын

@@TerminatorFRA yep. Wltoys gearing sucks

Very excellent but from where I find auto parts like gears, conveyor and metal connections

Any problems with the transmission gears holding up or the axle gears

So talented

I thought this was Kevin tablot XD

@boogalooswashere7889

3 жыл бұрын

Same.

very good

i had a 3600kv brushless motor lying around, decided to install it in this rc(wltoys 12428), i had no issues with the stock brushed motor as it was fast enough.As soon as i installed the brushless motor, after a few runs my shaft broke,replaced that,then my front diff slipped,replaced that,the buggy seemed to be fast but had lagging problems so it was definitely not for rock crawling as it would jump to 10kmph directly as u can see in the video 7:44. i only used 2s lipos for the brushless and it would break my buggy. 3s lipo is just mad for this. The rc car is back to stock and is running pretty great on 2s lipo, and its way more fun then a brushless bec it doesnt lag at all and also the rc car can be driven in rocks with no fear of anything breaking. If u want a brushless so badly then buy another platform as it will save u alot of money as ive already spend more then 120$ just on spars :)

what type servo you use

My motor mount screws holding the mount to the chassis are so tight i cant get them loose they will just strip them selves if i try any advice? Thanks

creative channel ..please make a volcano model at home and happy New year 2017...........:) ;)

I've been dreaming to have one of this huhu

Whoa this is cool! Vietnam?

Really cool video;)

Hi i have a question. What is the wire connection for the lights after this upgrade ? I like these lights and i need to work .

Do you need to replace the servo when replacing the motor?

How long play time do you get now instead off the original 10 min?

This is amazing

Fantastic so awesome!!!!!!!

Does this same technique works on the other RC CARS?? Coz i got a car vit camera n one vit non camera....so my question is will it work vit the same technique??

Hello, what batteries do you recommend in terms of power, duration and durability? Thank you!

The best way to destroy faster the transmission, faster than with the brushed stock motor. Transmission on this car is weak. I don't advise to upgrade it to brushless motor.

@goobisoft4873

7 жыл бұрын

Switch Off When Not In Use also the braking feature of esc will stress the gears and the teeth will be worn out much faster

@mitchelldoolan961

7 жыл бұрын

Arif Hassan if you were to invest a little more money in a quality esc (one that's programmable) you can adjust the power of the drag brake. also drag brake will not do damage if the drag brake did damage to the transmission the normal brakes would be 10 times worse. It's worth mentioning too that the reason brushless systems have drag brakes is to better replicate the resistance caused by the brushes on a brushed motor.

@goobisoft4873

7 жыл бұрын

Mitchell Doolan oh nice thanks for info

@mitchelldoolan961

7 жыл бұрын

Arif Hassan no problem just trying to help

@albertoantillon6636

7 жыл бұрын

Switch Off When Not In Use

Bạn biết chỗ mua xe ở đâu ở Hà Nội ko

Good

What size servo for steering, did you change to?

nice

It works if I just change the brushless motor and the ESC?, Without they servo and the transmitter??

Totally inspiring

if I want upgrade the esc,how about the gearbox and motor..?.need to upgrade too.?

amazing

@CreatingCreations

7 жыл бұрын

MkB HD Agreed;)

@RealMkB125

7 жыл бұрын

You Must Have To Agreed With Me Creating Creations.

can you plz give me some help with charging lipo 3s battery ?? what charger should i use ?

There go the diffs.

Amazing

@CreatingCreations

7 жыл бұрын

akshay jain Yes, this video was very amazing!

Sweet!

Hey I'm wondering do this will work on (JJR/C Q39)?

Can you do a how to video on adding a sway bar to a wltoys 12428? that would be awesome!

This is the power of brushless motor

Good job

THX THX THX you show were the body can get of that wase Soo help if this vid get 10M then you have to make another vid of this😊

buen video amigo...yo tengo uno ya mejorado y llega a 81 kph

Did you upgrade gear and drive shaft ?

whether the servos are waterproof

Does this servo work with the standard esc?

Great!

Thanks because i have beautiful a solution

Is it necessary to buy a new remote control with a receiver? Or is it also without? I am a beginner...

Is the servo a must have

Well-done. Speed seems double after upgrading.

What remote controll and speed controller did you use?

What did you do with the old electronics

Is this just for 3S Lipo or does 4S will work too without destroying something?

Tell me, why didn't you install servosaver from oryginal servo, is there bigger hole or what?

I was thinking of buying a PXToys 9302 you think he is good responds as fast as possible because the car is in discount on the gearbest

Thank

Creative channel can you tell me the measure of the socks (front and rear) of the WLTOYS 12428?? i bought one of this but first im going to upgrade the stability with an oil filled shocks, but the car its coming from BangGood. Thnaks!!! Congrats for the channel!!! ;D

@jamesfair9751

4 жыл бұрын

Did you ever upgrade the shocks. The stock shocks can add oil to them.

how about the diffs or the wheels? will they survive so much power?

Are the upgraded receiver and servo waterproof?

It works really? Is it breaked?