Thank you. I know you save me hours of research and screaming obscenities.

Thank a lot, same receiver and radio and you were the first one to do it step by step to help me properly flash my receiver and get it to bind to my radio. Stay in the air.

You solved my problem twice so far. I was looking all over youtube two months ago when I first started fpv and your video is the only one that solved the problem. I broke my first receiver and today you saved me again. Many thanks good sir.

@aleefpv9279

2 жыл бұрын

No problem!!! Glad I could help.

Thank you so much! This was the walkthrough that worked best and also got me to install the amber sounds haha! Just bought the Diatone Roma F5 V2 and this worked perfect on it.

Thank you, I'm new to FPV Drones, and this drove me nuts all night until found your video.

@aleefpv9279

2 жыл бұрын

No problem. You're welcome!

You helped me with the easiest way to complete this. Thank you!

You saved my sanity bro! I was about to think I fried my receiver! Major props to people like you !

Bro if i will see you in my life personally i will buy you drink . Thank you my friend for amazing video and explanation. Thank you and God Bless. you.

Thank you! Great instructions and to the point!

you litterally saved me ahah thats what i was lookin for❤

This worked for me thanks! One complicating factor was that my R-XSR came in a BNF drone so I had to make that little pigtail cable. But your piece worked great

@Thibault93160

2 жыл бұрын

How did you make it ? I have the same issue... thanks

OOH mg! Dude you're a lifesaver I spent days F*king with this all failed. You did it! Thx soo much. You already know my frustration.

very helpful video. thank you!

Awesome! this worked for me perfectly! just bound this to DarwinFPV Baby Ape 3"! Thank you !😀

Thank you so much !

Fixed! Thank you!

You are number One Man......

thank you bro

Top video, não estava consigo mas com seu video deu certo. Valeu.

Very good Thanks!

Thx a sht tons!!!.

THANK YOU SO MUCH I LOVO YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Thank you very much

thanks brorher

thank you it seems like its working after days of wondering what the hell

MUCHAS GRACIAS BRO!!!

@aleefpv9279

2 жыл бұрын

eres bienvenido my dude!

Note the update on the EdgeTX system. I couldn't upload new software to RXSR, only reverting the radio back to OpenTX helped

thank u

I've been trying to get this working should the reciever show its powered on through smartport?

I am working with a Orange Cube and have a x7 Taranis q bound to the R-XSR receiver , When i connect to mission planner i can move the flight controller but when i get to radio calibration non of the areas in the pitch, roll etc. is green how can i make the transmitter be seen in the radio calibration . Thanks for your help

i flashed the reviever, and updated the radio but for some weird reason the accst reviecer when powerdup with the bind button just keeps on giving me the sollid red and green light

hello. how to connect receiver to radiomaster tx 12? I have problems with this. Thanks

Thanks Much for the Tutorial! Question: If the Firmware was originally not on the Controller, should you flash the firmware to the internal module as well?? Aloha

@aleefpv9279

2 жыл бұрын

You're welcome! You can update the OpenTX firmware on your transmitter if you choose to. I think its recommended that you do.

And if i hawe opentx 2.3.something, also i need same download? I buy a new kopis2 with a rxsr reciver and not binding...

Im not getting a flash successful message. Any ideas if that's required?

I have the exact same problem just with taranis x9d plus.. I bought the mark 5 analog drone with frsky r-xsr receiver.. my old Taranis x9d plus (opentx) non eu model bought in 2016 won’t bind with this mark 5 drone.. It makes my crazy.. The receiver is just blinking red after I try and bind it.. can I fix it if I follow your video?? My taranis I different (x9d plus) and not a Qx7.. Does anyone with taranis x9d plus know if I can use this video guide ? Plz help 🙏

If you have any of those tiny whoops with an SPI frsky receiver, updating the taranis internal module to 2.x.x will also render your tinywhoop useless unless you have a multiprotocol module/radio.. My qx7 still has the pre 2.x.x firmware on the internal xjt module for this reason. Any receivers like the xm+ r-xsr will come with the 2.x.x firmware now so I just downgrade them as you have shown here.

Where can I find the link to the right firmware

I'm still having trouble grrr. I get a green light and a blue light. The red light comes on but it stays on, it doesn't flash. Any ideas?

Same issue here..I think frsky is bs...but still I need it for a whoop and stuff like that

on the radio is xjt 2.1.0 ??? and rxsr191112 ???? sorry i am the new pilot :)

I just got the nazgul evoque f5 with rsxr reciever, followed the video to update firmware and my taranis controller pairs with the reciever but still will not show inputs in beta flight, anyone know why?

@aleefpv9279

2 жыл бұрын

Are you still having issues?

help me i have tx12.

It says it failed to install firmware

Still won’t bind for me.

My taranis just shuts off whenever I try to flash my receiver (Shuts down when its starting to reset the receiver). Anybody know why it does this? Can't find any help on google...

@aleefpv9279

2 жыл бұрын

Sorry I have no idea

Hi, I just got Nazgul5 V2 HD with R-XSR, and having problem with binding to Taranis Q-X7, should I also update the receiver?

@aleefpv9279

2 жыл бұрын

Do you have the Taranis qx7 accst?

@krissfpv

2 жыл бұрын

@@aleefpv9279 yes

@aleefpv9279

2 жыл бұрын

@@krissfpv go ahead and update. Follow the video. Its pretty straightforward. Good luck!

@krissfpv

2 жыл бұрын

@@aleefpv9279 ok, thanks, first I have to wait for the cable :)

@aleefpv9279

2 жыл бұрын

@@krissfpv cool! Hope you get it figured out!

I got my thing to bind but I can’t get my drone to fly or even arm or get the motors to spin, do you know how I can test to make sure my remote is working? I got it to bind I just can’t arm it or fly it or anything.

@aleefpv9279

2 жыл бұрын

Did you program your transmitter through betaflight or whatever you are using?

@Guero.Quijada

2 жыл бұрын

@@aleefpv9279 not yet how do you do that? It says arming disabled on top corner also ex failsafe msp on the flags

@aleefpv9279

2 жыл бұрын

@@Guero.Quijada Through the program you configured your flight controller

@aleefpv9279

2 жыл бұрын

If you have done that

Shoot. Mine didn't come with that pigtail.

Lol I just bought a new rsxr and loaded firmware from sd card that worked with my older rsxr, 190.? Thinking hell my others work with this firmware, but nope in sbus mode zero movement. Must be 19112 is the firmware time take it back to accst from access, i too am up cussing because I've done it many times, but 2 yrs ago, , I will try this next tomorrow. 7 rsxr all on 190? No issues. Lol fuckn frsky, radiomaster elrs soon tired of the frsky loop of bs. But I haven't had the need for any new rx haven't destroyed a quad in some time . So drink another beer cuss at frsky, hell it's 330 am might as well continue on. Lol yep I know your frustration.

@MrBumbles2

2 жыл бұрын

Lol poof there it is, works 5min. Unreal thanks ,

Don’t see the button.

Remember mention fcc is American and lbt is European.

wont work