Finally someone who knows what the hell they're talking about.

@IgorBrandao

2 жыл бұрын

Hahahaha thanks Steve! Glad you found the video useful 🙌

Fantatic bro, that last tip hold for 2s to turn everything off is what I didn't know and was what needed 👍‍👌‍

@IgorBrandao

2 жыл бұрын

Nice dude, enjoy responsibly!

Thanks mate, the most logical and easy to follow description of the ECU features on this bike I've seen. 👍

@IgorBrandao

Жыл бұрын

Awesome, super glad that the video was informative and useful to you. Cheers!

Great video! 8 minutes and you explained everything!

@IgorBrandao

2 жыл бұрын

Thanks Damir! Im glad you found the video useful.

Best and clearest so far. Thank you

@IgorBrandao

Ай бұрын

Youre most welcome!

Just picked one of these up a couple days ago and the video was a great overview of all the modes. Thanks.

@IgorBrandao

Жыл бұрын

Im super glad to have helped you understand your new bike better! Enjoy it and safe rides!

@Igor Brandao dood your a huge help, I didn't even know I could shut the traction control off.. when I wheelie her I noticed my slide control light was coming on, that must be why she wouldn't keep the front wheel up! Is there a way to shut traction and slide off but keep lif on do you know?

@IgorBrandao

2 жыл бұрын

Hi friend! Glad you found the video useful. About your question, unfortunately no… LIF system depends on TCS to work, so you can only have LIF on if TCS is on.

Great job! Please, explain how to use cruise control also)

@IgorBrandao

2 ай бұрын

I already made a video on this exact topic a long time ago, have you seen it? kzread.info/dash/bejne/lYGqq9yJp93Jd84.html

Fantastic video 😎👍

@IgorBrandao

Жыл бұрын

Thanks bro! Glad it was useful for you :)

Thanks for the vid. Great stuff. One question - The manual does mention that 'D' modes should not be changed while the vehicle is moving. Would you know if the same applies to the 'TCS' control, or is it possible to do this on the fly?

@IgorBrandao

Жыл бұрын

I read that as well on the manual, but haven’t tried changing neither TCS or D modes to not risk some silly damage… I suppose TCS should be ok to change while moving as it is less related to engine power output, but I wouldn’t risk it, as coming to a stop costs nothing to do

@Swisha90s

3 ай бұрын

I dont think it will dmg anything, or i hope not. Cause ive been doing it xD When i ride highways i go mode 1, but when im pulling in to the city i change it to 3 cause it stops the twitchy throttle. So far so good :P

Be advised that the TCS must be turn off in case you find some off road. It happened to me once and keeping the TCS on, the rear wheel almost blocked and I was so little to fall from the bike.

@IgorBrandao

Жыл бұрын

Oh wow, glad you managed to keep the shiny side up! But a torquey monster like the MT09 with street tires on dirt road is really sketchy, especially because the assists weren’t designed for such conditions.

Hello Igor. Off topic: Do you now how to chance the language on the settings? Thanks

@IgorBrandao

Жыл бұрын

From what I recall, there is no way to change language on this bike, only units.

Brilliant showing how to alter the settings, just one question when you have put the required settings in, do they control options 1234, or are they only working on the M setting

@IgorBrandao

Жыл бұрын

Hi Andy, thanks! To answer your question, the menu selections you make only apply to the M setting. 1, 2, 3 and 4 are factory presets built-in the ECU and while from the dashboard you can't change them, tuners when flashing can change those. Ride safe!

@andycarlin2168

Жыл бұрын

@Igor Brandao Thanks for the reply, after watching your video I went and checked my settings, I've just got mine it's a 21 plate Sp, checked the settings and good job I did as everything was switched off, I'd of been in a hedge somewhere 😂🤣😅🤣🏍🏍

@andycarlin2168

Жыл бұрын

@@IgorBrandao ❤️🏍

@IgorBrandao

Жыл бұрын

@@andycarlin2168 oh wow, just in time then hahahaha the previous owner was a bit sassy on two wheels to say the least hehehehe

In Mode M - if tcs is set to 1, does it reduce engine power or only kick in when the wheel is starting to slip?

@IgorBrandao

Ай бұрын

Regardless of mode selection, TCS works removing power by closing the throttle when it detects wheel slip. Each level of tcs dictates how aggressive or lenient this effect will be! Same goes for LIF and they all operate independently from power mode selection

TCS 2 is every setting on level two not maximum. To put everything on level three you would have to do so within the menu and set that as your manual mode.

@IgorBrandao

2 жыл бұрын

Good observation my friend! Thanks for the input

@aressimbamt0959

Жыл бұрын

didnt know that

Question bro, when you put tcs mode 1, and hold to turn off, it means only the tcs off? The scs and lift off still in 1 is it?

@IgorBrandao

8 ай бұрын

I havent tried to do that combination, so I dont know! I also sold the bike so can’t test anymore, hopefully you can find the answer online!

Noma muchísimas grasias mañana lo podre aprueba en mi bike

@IgorBrandao

2 жыл бұрын

De nada!

Does this process secretly turn off ABS? Have you tested your bike with the OFF setting?

@IgorBrandao

2 жыл бұрын

Yeah, I have tested it and while it allows for full throttle control and nice balance point wheelies, no, it does not turn off ABS.

Hey, when I turn the tcs mode to off does the anti wheele also goes off?

@IgorBrandao

2 жыл бұрын

Correct!

Thank you. I vietnam

@IgorBrandao

2 жыл бұрын

You’re welcome! Glad to help

Tnx 👍

@IgorBrandao

2 жыл бұрын

You’re welcome!

Does your motogadget mirrors vibrate above 40mph and or when accelerating? Thanks in advance.

@IgorBrandao

2 жыл бұрын

Hi Christopher! They do vibrate, but only on highway speeds (70mph+) and that is because I had to mod the bar end adapters so it could fit on this bike. I believe that if I could have fit the adapters as they come, they would not vibrate at all. And even with the vibration, its is not to the point where you can’t see anything on them, so overall very good mirrors!

@AndreiOBK

2 жыл бұрын

I have the same engine on the Tracer 9 GT and mirrors do not vibrate until unorthodox speeds (100 mph)

Not sure if I am seeing things.. I have 2022 standard mt.. But to me the sp screen looks sharper than standard model.. Any thoughts out there..

@astifcaulkinyeras

4 ай бұрын

I have a 2023 standard model and the screen looks exactly like this.

@IgorBrandao

3 ай бұрын

Because I never seen the standard screen I don't have an opinion, but if its really noticeable I would take it to a dealer and put it side by side with another unit to know for sure! Maybe your screen came defective from factory or something...

The color on my 2021 SP screen is only green. It’s never white or orange. What am I missing. I’m going to turn the color off and on to see if that helps. Maybe set the shift points. 🤷🏽‍♂️

@IgorBrandao

2 жыл бұрын

Thats super weird! I would try to turn on and of like you suggested, but if it doesnt change, I'd definitely activate warranty for it

@user-mx8gq9ni1c

2 жыл бұрын

When you have the taco color in off,it remains green all the way,most white. When you turn tacho color on,it starts white,around 6k rpm turns green,then orange and finally red.

@user-mx8gq9ni1c

2 жыл бұрын

*green,NOT white.

Hi, quick question. Powerwheelies possible with TCS 1 SCS 1 and LIF 1? I dont really understand, how the Modes affect the Nature of the Bike. Wheelies for Example. Just wondering.

@IgorBrandao

2 жыл бұрын

Hi Paddy, that’s a great question! I have yet to do more testing to confirm this for sure, but from what I tried so far, LIF has to be off for any decent wheelies… when LIF is on 1, it does allow the front to raise a bit (around 10 inches from the ground) but that is it. When you set it to 2, it doesn’t affect the wheelie height but how fast it happens - it goes up smoother on 2 and quicker on 1, and when its on 3, the front wheel doesn’t come up at all. TCS just affects traction, so as long as your rear tire doesn’t slip, power wheelies are possible on all settings, but clutch ups only work when its off. SCS is just tank slapper control. When it detects the front tire is starting to wobble, it kills a bit of power until it stabilizes again. So even with LIF off, if SCS is on, you can’t wheelie at all as well

@paddyr.3721

2 жыл бұрын

@@IgorBrandao Thank you for Answering my Question - i appreciate it 😊 My RN69 arrives tomorrow - Thanks to you, i know exactly which Modes im going to use 😎✌🏼 Greetings from Switzerland!

@IgorBrandao

2 жыл бұрын

@@paddyr.3721 nice!! Enjoy my friend and ride safe

@stevejohnston3339

2 жыл бұрын

@@IgorBrandao I don’t have a problem doing a power wheelie with Tcs-1 scs-1 lif-off.

@IgorBrandao

2 жыл бұрын

@@stevejohnston3339 nice! I have learned that SCS isn’t tank slapper control, but slide control, so it should not affect wheelies as well!

You can pull a fuse to eliminate abs

@IgorBrandao

3 ай бұрын

Yes but doing so on this bike makes you lose other of things besides ABS like wheelie control and even traction control. Good if you're an experienced rider, very bad otherwise lol!

@jackmatt1022

29 күн бұрын

If you do enough wheelies the abs will turn of and you can do stoppies

Hey which mirrors are those

@IgorBrandao

2 жыл бұрын

Motogadget m.flight

mine is on tcs 3 and still no travtion when ypu push it 😅

@IgorBrandao

Жыл бұрын

Really? For me tcs 1 is already very noticeable

SCS control is nothing to do with wheely or lift its for slide control on how much it will let you get back wheel out of aligment before it pulls power

@IgorBrandao

Жыл бұрын

Hi friend, thanks for adding the correct info here! I made this video only a couple of days after I got the bike, so didn't have much context on everything yet. Appreciate it!

this 1 mod , have an impact at your driving ? you know , 1 mod keep you on kind of train rails ?? ! Cause averybody said how playful is the Tracer 900 and Mt09 ,but when i ride it , i didnt find it playful at all . Now... this conclusion is falty cause the bike was set at mod 1 ??????

@IgorBrandao

2 ай бұрын

Mode 1 is supposed to be the one that the accelerator is the most aggressive, and I think that is what folks think is playful about the bike. If you feel its not, try riding with mode 1 and all assists disabled. That is sure to get your blood flowing 😂

go to 7:20 to find out the answer LOL

@IgorBrandao

2 жыл бұрын

Hahahaha thanks! I wanted to give an overview on riding modes and aids before addressing the title subject.