💥 New Video: THE RAG TRICK: a fantastic way to reprofile your axe into a slightly convex carving axe geometrie... 👉👉👉 Video: kzread.info/dash/bejne/pot92rmjosvWppM.html 💥 Forging a double edge carving axe from a old hammer! 👉👉👉 Video: kzread.info/dash/bejne/hn132ayuksi8pps.html

@psmonster7237

3 жыл бұрын

The trick we can see in the video from 5.07 to 6.42 ?

@ptonpc

3 жыл бұрын

That was really good. It would not have occurred to me to try that.

@jayz184

3 жыл бұрын

what was the black dye? motor oil? and what does the flame do to it. what was the type of wax you used there for the handle. Amazing work, beautiful. love the music too.

@jameshaulenbeek5931

3 жыл бұрын

@@jayz184 most likely he used a black alcohol based dye, like is used for leather - it absorbs quickly, dries quickly. There are many wax products that can be used - paste wax is a commonly available one, and you can make your own using beeswax and oils, or just beeswax

@SoupeDeSup

3 жыл бұрын

How many time it took for this result ? Its amazing.

Folk just doing stuff they like enthusiastically is top tier KZread content

Using a rag and file to set bevel: Brilliant! never thought of it

@FelixImmler

Жыл бұрын

Thank you very much Jonathan!

@raginroadrunner

Ай бұрын

I use a block of wood.

@Side85Winder

14 сағат бұрын

If you have a spare +40min go for it. I would have used the angle grinder (bench grinder if you have it) to rough it out then a few min on the file to smooth it, finish with the stone. I think using something less compressable than a towel would be better to keep your angle consistant. A simple block of wood should work. The finished result is very nice.

Beautiful work. You remodeled an 8 dollar axe into a 150 dollar axe anyone would be proud to own. Mad skills!

@FelixImmler

Жыл бұрын

Thank you very much!

@derlowenkonig7971

11 ай бұрын

And put in 200$ worth of work and tools....

@seanduncan9722

7 ай бұрын

and homie made thousands on this video lmao@@derlowenkonig7971

How creative! I never would have thought to use a folded towel as a brace to get the right angle with the file! Love it! A very nice axe!!

@tomconnor2529

Жыл бұрын

This is the first time I've seen an axe sharpened like that !

@jonnes__4657

Жыл бұрын

This axe is for fighting.... less weight. ☝

@BigpapamoneymanMVPtypebeat

Жыл бұрын

@@jonnes__4657 while your totally correct , this style of Scandinavian style is also known to be great for felling bark from timber quickly, much harder with a wedge (ect.) style axe

@jonnes__4657

Жыл бұрын

@@BigpapamoneymanMVPtypebeat Yes correct, less friction in separating the bark. .

Makes a pleasant change seing a guy without ALL the tools on the planet in his workshop.Good one!

Endlich mal jemand, der ohne die Hilfe von HightechMaschinen und mit bloßem handwerklichem Talent ein so beeindruckend schönes Handbeil fertigt! Meinen allergrößten Respekt!!

@FelixImmler

3 жыл бұрын

Vielen Dank Martin!

@christiangreif9865

3 жыл бұрын

Sehe ich ganz genauso. Top👍🏻 Eine kleine Einkaufsliste wär noch super mit den Lacken, Werkzeugen und Zubehör.

@Biwak_Nord

Жыл бұрын

@@FelixImmler wie wäre denn dein Preis dafür ? 🤔😎

@Winnipuh50

Жыл бұрын

Ich habe von der Länge etrachtet die gleiche Axt. Meine ist aber vorne viel wuchtiger und ich kann damit sehr gut spalten.

@fetterAnonymer

Жыл бұрын

Wird trotzdem immer ein 8€ Beil bleiben. Der Stahl wird nicht hochwertiger durch das in Form bringen... Ist jetzt eben nur eine gut aussehende billig Axt...

The cut to quiet at the whetstone was beautiful. This was inspirational. Nice video.

@FelixImmler

2 ай бұрын

Thank you!

This reminds me of watching my dad in the workshop when I was little. He made all kinds of things and had great skill with leather. He taught me, "a guy can do anything if he just has the tools."

@brandonbowerstx

2 жыл бұрын

and the time.

@ryanyoung3890

Жыл бұрын

@@brandonbowerstx and the knowledge

@oldmanfred8676

Жыл бұрын

If it is impossible it will just take longer!

@horstpopescu1170

Жыл бұрын

Ihr Vater hat recht, aber etwas Logik und Geschick gehört auch dazu ohne das geht es nicht

@richardgravel4903

Жыл бұрын

Celui qui est habile s`achete des outils, celui qui est maladroit ne s`en achete pas!

A guy with covered face walks into a store and buys a hatchet. This would be a major news story on 2019.

@HuwPewPew

3 жыл бұрын

Ikr! I always feel weird going in the bank with a mask on lol. I'd be in jail pre-2019.

@odys3803

3 жыл бұрын

@@HuwPewPew yeah I remember in 2019 I was asked to put a hat off so the camera can see my face, after 2020 you can wear a balaclava😂

@bilbohurricane7657

2 жыл бұрын

Probably depends on time of day and color of your...ahem...clothes.

@bluehorizon9613

2 жыл бұрын

hahahaha ! yeah.

@UncleAntiClaws

Жыл бұрын

I walked into a bank with a gun on my hip dark sunglasses and hat... I wasn't thinking and I wondered why the guard and everyone else was on edge and spooked. Then the guard told me, "hey man you are gonna have to take the glasses and hat off." Why didn't he mention the gun?!

Love the cloth hack for sharpening the hatchet nice one and happy Easter Felix.

@rancidpitts8243

3 жыл бұрын

Very simple and consistent. Why did I not think of that?

@claudiobarbarino8488

3 жыл бұрын

....meine compliments👍👍👍👍👍

@ronrico2620

3 жыл бұрын

So simple and effective. My head just imploded

@kaizen5023

3 жыл бұрын

yes really cool

@shinobihouzin

3 жыл бұрын

I'm glad that I learned something today , and this was it !

I have to say i like the fact you are showing a sheath being made for the axe.....most restorer's only show the restoration or reconfiguration of the item and nothing else! Thanks!!

@zippitydoodah5693

2 ай бұрын

Unfortunately he did not include a welt.

Real Swiss Craftsmanship ! You are the VERY BEST FELIX !!! SCOTT FROM NH.

@FelixImmler

Ай бұрын

Thanks a lot dear Scott!

How you sharpened the blade just blew my mind! So simple yet effective

@brianezzell7005

2 жыл бұрын

Yeah I learned something new. I was like..."Well I'll be damned. "

@randa4382

Жыл бұрын

I saw a few comme ts auding to this and waz like wtf is he gonna do... what am i missi..... well ill be a sonovabitch

That cloth sharpening technique blew my mind.

@FelixImmler

3 жыл бұрын

I will do a Video about next friday...

@titanuranus

3 жыл бұрын

@@FelixImmler I assume you go through files at a fairly rapid rate. My metal shop teacher would have slapped me on the back of the head if he ever caught me going back-and-forth on metal with a file.

@Anomaly.Filmworks

2 жыл бұрын

Imagine what you would have learned in shop class...

@Anomaly.Filmworks

2 жыл бұрын

@@titanuranus he was going side to side..

Love how excited he gets on making this hatchet into a piece of beauty. Remarkable talent and keep up the great work!

That was the most satisfying video I´ve seen in a loooong time! That workshop is awesome too. Thanks for sharing your craftsmanship and inspiring us!

@FelixImmler

Жыл бұрын

Wowww thanks a lot for this wonderful compliment!

@davidfirth6535

Жыл бұрын

Thats exactly what i was going to say, superb video.

I could watch expert craftsman stuff like this almost non-stop

I'm impressed with how difficult it was to remove the stock head from the handle. I've had cheap axes where the head just wants to fly off with each swipe.

@Vivungisport

2 жыл бұрын

Felix should take notes. The trick is to swing it heavily into lumber for about 5 minutes and voila! The handle start to wiggle a lil. 😉👍

My mind is blown on the microfiber/file sharpening technique and the cut off axe handle for the vice work!

@FelixImmler

Жыл бұрын

Thanks a lot!!

Nice workshop and old swiss techniques. I use to remember a swiss friend of mine with your videos, one of my best friends. Sadly he passed a couple of years ago. He used to do a lot of your swiss hacks. Thanks for teaching us.

@FelixImmler

Жыл бұрын

Oh no...that's a sad message!

@tallerdumo

Жыл бұрын

@@FelixImmler You make remember him as happy and calm as you are and I thank you for that. Your videos are very nice 👌 keep on going! I will do your axe 🪓 modification soon.

Beautiful craftsmenship. I did the same thing a couple years back with what looked like the same cheap Chinese axe. After much work profiling the head and building a custom handle I was quite proud of it. After only a few uses the head broke vertically where the handle was attached. Moral of the story: if your going to invest the time, start with a good piece of steel.

@FelixImmler

3 жыл бұрын

I agree.... But until now i am quite happy with my modified axes. C40 Steel on 53 Rockwell ist okay for my uses...

@-wellthathappened.34

2 жыл бұрын

Exactly what I was thinking, but the cheap one is definitely good to practice on.

@pyromoron

2 жыл бұрын

all it is is polishing a pile of shit 101

@christopherfisher128

2 жыл бұрын

@@pyromoron The Japanese created an art form out of polishing turds. It can be quite profitable. Perspective keep one from becoming a bitter lil troll.

@therobbyguy

2 жыл бұрын

Next time anneal the head 3hrs at 650f (Let cool) then quench temper the edge of the blade at 400f (Purple). They didn't bother.

Manual tools and a pile of reclaimed materials in the shop,,, my kinda place !!

@FelixImmler

3 жыл бұрын

Thanks a lot. this is the shop from my youTube friend Jenniswiss kzread.info/dron/6By2dBlmhqcuSMPf3K7TMg.html

You did a beautiful job transforming this hatchet.

@FelixImmler

Жыл бұрын

Thanks a lot David!!

Beautiful work. I loved the towel trick! Never saw it before

@FelixImmler

19 күн бұрын

Thank you!

Das ist doch Mal ein Projekt über die Osterferien! Ist richtig gut geworden!

Instantly subbed dude. Real craftsman are rare today. You basically worked with metal (cold) AND wood AND leather on nearly high professional level why smiling AND having a good time ONLY. I'll be damned mate. You are an idol.

You r THE artist Felix.

LOVE how you use "non tools" (the can) as a tool! I do the same with my leather work LOL!

The bevelling technique surprised me and the stone walled workshop is beautiful. Great looking axe !

@FelixImmler

3 жыл бұрын

Thank you very much! I show the bevelling technique exactly in the next video!

Die Schärfmethode is ja ultra genial!!!

@FelixImmler

2 жыл бұрын

Danke, Deine Nachricht freut mich!

Nice work! I would've bought a flap disc for that angle grinder & save myself some hand rasping. Thank you for sharing. Have a blessed day.

@FelixImmler

Жыл бұрын

Thanks a lot for this wonderful compliment!

You really turned it into a beauty, congratulations ! Consider to make the leather collar wet before stitching it - leather stretches when wet and tightens up again when drying - it would get rock-solid and not loosen in the rain.

Love the way you go slow, steady, and smooth. Real Craftsmanship. Nice.

I definitely did not expect that 80s electronic synth music :)

@FelixImmler

Жыл бұрын

Thanks a lot for watching!

Hey Felix. I've only watched a couple of your videos so far. But they were both Gr8. I loved how you used the hand towel to control your filing action. Beautiful I will be making my new axe, a new are, that I've always wanted. Thank you Sir

@FelixImmler

2 жыл бұрын

Thank you so much for your positive feedback!

Fascinating! A little time, a little work, and a tool you can use with real pride. Excellent work.

Outstanding, Felix!!!!!! That axe is beautiful! Glad you didn't attempt this project using only a Swiss army knife. lol Many thanks to Jenni for letting us see his awesome workshop again too!

@FelixImmler

3 жыл бұрын

Yes... thank you Mr Jenni!!!😂

I'm moving on from big knife's machetes to axes now ,cheers Bro.

I didn't realize I had watched this before but I enjoyed it just as much the second time. I found an old ax that I had put away a long time ago and I know I've got a couple more someplace else. So when I get a chance I'm going to start working on them and all I can draw inspiration from your video.

Thought you missed one of lifes few opportunities to use the SAK Corkscrew ...... to remove the original plastic wedge, keep up the great work, the axe looks great

@tommymcweedface229

2 жыл бұрын

Plastic? I wondered why it looked so weird and drilled out so easily! Thanks for the info!

I have to say, I really appreciate the hard work you put into that axe using tools most anyone can afford.

@FelixImmler

2 жыл бұрын

Thanks a lot Michael!

The rag trick blew my mind. He has a lot of great sharpening ideas.

@FelixImmler

10 ай бұрын

Thank you very much Do you know this one? kzread.info/dash/bejne/c51mmpeFdseWhbA.html

Greetings! It is very interesting to see how a skilled person remakes an ax. I also did something similar, since the shape and weight of the finished axes did not suit me. I want to note one feature. When installing the ax handle, it is better to use not a triangular wedge, but a rectangular one. And in the handle itself, cut a trapezoidal slot. So that the expansion would be towards the bottom. In this case, during the introduction of the wedge, the upper part of the handle expands. A very tight connection with the ax head is achieved. There is no need to introduce additional metal parts there. I made the wedge itself from oak, about 8 mm thick. The handle can be made from any hard wood that is not prone to splitting. It is desirable that the grains in the wood of the wedge and the handle be perpendicular. It is also recommended to lubricate the wedge with a rubber solution in an organic solvent before inserting it into the handle. Then small dimensional fluctuations caused by changes in humidity will be compensated by a layer of rubber. It will also provide even more friction between the parts to ensure reliability. The experience of operating such axes has shown that under no circumstances does the handle begin to loosen.

@FelixImmler

Жыл бұрын

Thanks a lot for your super interesting feedback!

@ravithejon2466

Жыл бұрын

You obviously have no experience setting axe heads, the handle flares just below the head to keep it in place, the triangular wedge flares the top on one axis and the circular metal wedge flares the top on the other axis, creating a super tight fit.

@hikewomeat

Жыл бұрын

The ax is exposed to strong mechanical influences. In addition, humidity leads to expansion of wood. The triangular wedge has more opportunities to get out of its place. Even the use of metal inserts does not solve this problem dramatically. The use of a wedge in the form of a parallelepiped from solid wood gives such an opportunity. In this case, no additional metal details are required. You can verify this yourself by applying this method.

How you sharpened with file and towel was genius

@Anomaly.Filmworks

2 жыл бұрын

Pretty old technique...

I still have my hatchet from my Boy Scout days. My stepdad said I must get a good one. I cut grass for weeks to buy a Swedish made hatchet. The handle is White ash. Still a great tool. Holds a good sharp edge. Circa 1967.

@FelixImmler

2 жыл бұрын

That is awesome!

One helluva workshop. A beautiful piece of work!

Absolutely fantastic work and result- Very inspiring, thank you!

I've just been transfixed with you fantastic video. Brilliant idea and well presented. Felix you are amazing and I thank you. Please know that you reach far and wide and you bring education and such joy for many many people. Thanks you Gray over in the UK!

Респект человеку с прямыми руками! Отдельно за викторинокс 😊

@FelixImmler

Жыл бұрын

Thanks a lot for your comment!

Ein obercooles Teil !!! Super Idee !!! Danke für die Inspiration !!! 💪💪💪🤘

Absolutely brilliant design and workmanship. I’m jealous of your skills.

That was awesome! The rag trick is one of The most ingenious things I've ever seen. I would have thought the grinding wheel would have pulled the temper.

@lalli8152

3 жыл бұрын

If you mean the metal removal to make the beard i think it was far enough from the edge to not heat it too much.

@matthooks5840

3 жыл бұрын

@@lalli8152 I believe that's the case.

@janwintraken

2 жыл бұрын

Pretty Shitty on your File tho. Files (except from Diamond Files) Generally have cutting edges Designed for a Forward cut so any sideways or even Backwards cutting usually dulls them out.

That rag trick! Like what?! Now I need a shop.

Fantastic video and result! Thank you so much for showing the way you sharpen the axe!! How clever is that, with the cloth to maintain the different angels! I always have trouble sharpening and for sure I'm going to try that out tomorrow!

If you soak the leather rope in water before you use it , it will shrink as it drys becoming very tight, old native American trick,

@FelixImmler

3 жыл бұрын

Hello Sarah. Thanks a lot for your valuable hint!

@robertfandel9442

2 жыл бұрын

Untrue

@misssarahwinterbottom7773

2 жыл бұрын

@@robertfandel9442 it must be true I saw it in an old western,

@buntbar2438

2 жыл бұрын

@@robertfandel9442 Not really, they mix up raw skin with Leather. But Leather also shrinks and hardens while drying.

@whomagoose6897

2 жыл бұрын

Even better is using the sinew of the animal. Sinew is the tendon and ligaments of the deer or buffalo. You can use cow sinew. Tendons connect the muscle to bone. Ligaments connect bone to bone. Leather is just processed animal skin. Sinew is often used for American Indian arrows for their bows. Attaches the flint arrow head to the arrow shaft. Apply the sinew wet. Wrap very tight. Sinew shrinks as it dries. Once dried it's perminent. When dried it has the color and appearance of dried glue.

Love that you're using that stumpy little pencil as far as it can go.

Okay. You won me over when you pulled out the Swiss Army knife.

Sensationelle Transformation! Es macht Spaß, Dir bei der Umsetzung Deiner Ideen zuzusehen! Vielen Dank für Deine Mühe - das Video dauert nur 15 Minuten. Die Arbeitszeit war bestimmt viel länger ;-) …dann noch schön geschnitten - einfach nur Wow! 😊

@FelixImmler

Жыл бұрын

Vielen dank für das tolle Lob!

The music is great. Love the axe too.

You do fantastic work, man! Thank you for the video!

Clicked expecting a basic conversion video. What I got was a fantastically edited and very awesome conversion video! Love the soundtracks and the happy Mr. Bean noises he makes

That Rag trick got a like... Thank you!

Beautiful! Great show Mr. Immler! Congratulations, almost 100k! Would it ever be worth considering redoing the heat treatment on such an axe?

@FelixImmler

3 жыл бұрын

Hello Julius!! Thanks a lot for your compliment! This kind of axes has often the DIN Norm 5131 B. This norm says, that the material is C40, the hardeness ist between 50 and 55 Rockwell and the edge is hardened in the first 30mm behind the cutting edge. So the part where i worked was not harended.

@SmoothGefixt

3 жыл бұрын

@@FelixImmler Ah yeah, was more wondering about the edge retention? Heat treatment might not be great on the original, if it could be improved.. Cheers!

@michaelgossett4727

3 жыл бұрын

@@SmoothGefixt no

@Freekniggers

3 жыл бұрын

It would definitely get the paint off quicker.

@NihonDream

3 жыл бұрын

I have had a pleasure to watch you during your work. Nice, tidy, organised, without unnecessary moves and talks, various techniques AND THAT SMILE. YOU LOVE IT! Thank you!

Outstanding!

@FelixImmler

3 жыл бұрын

Thank you kindly!

@dgunearthed7859

3 жыл бұрын

excuse me, don't you have another 5,000 minute video to produce? lol

@millinamillota7537

2 жыл бұрын

@lily tv sorry, but you don't know what you are talking about. It's a cheap Helko Axe for Massproduction that's right, but it's a good steel, easy to sharpend and the handle is also from a good quality. Don't think that quality must be expensive. You can pay 100,-$ for a Axe cause there a cool Brandname on it, but it's not that worth.

That shows you what the right amount of "Elbow Grease" will do. Nice work, brother.

@FelixImmler

Жыл бұрын

Thank you Eric 😂

Love your workshop! Hands down the coolest looking shop, and an idea for a mancave look.

@FelixImmler

Жыл бұрын

Thanks a lot Calin!

Thank you! I had never thought of a filing technique like what you displayed. I plan on using the technique shorty.

@FelixImmler

3 жыл бұрын

Glad it was helpful! Thanks for your comment David!

Beautiful! Your ingenuity has no bounds and very inspirational

@FelixImmler

3 жыл бұрын

Thank you! 😊

Amazing to see what a true craftsman can create.

@FelixImmler

2 жыл бұрын

Thank you so much!

Absolutely amazing! All "by hand" using no sophisticated machine tools. Quite a good video!

@FelixImmler

Жыл бұрын

Thanks a lot!

Amazing transformation! With the skill you have I was surprised that you didn't do all of that with just your SAK.

@FelixImmler

3 жыл бұрын

Glad you liked it! Haa ha haa olmost no SAK today...

Great job eh friend. I happened to have one axe like that and had been eyeing what kind of modification I could work on it for quite a while.. now you are giving me an idea... That method of sharpening also is curiously ingenious.. Congratulations..

Seriously a boss with that Victorinox swiss army knife.

@FelixImmler

Жыл бұрын

Thank you Ken!

... BEAUTIFUL DESIGN and craftsmanship ... Finished product is Top Shelf ...... if only better steel .. .. Thank you for sharing your skills ..

@FelixImmler

2 жыл бұрын

It's c40 Steel hardened on 53 Rockwell.. that's okay for me. The Head is made in germany... the handle is even Swiss made

Das schönste an deinen Videos ist immer, das man sieht wie viel Spass Du dabei hast...einfach super.👍

@FelixImmler

3 жыл бұрын

Danke für das schöne Kompliment!!

nice the music made me feel that I was in a german techno nightclub back in the day lol

@FelixImmler

3 жыл бұрын

Haaa ha haa sorry for that 😀😀

@spektr540hemi

3 жыл бұрын

@@FelixImmler It is a good thing. Great memories!

@wesleymartenson6079

2 жыл бұрын

Hello Sara how are you doing today??

Ich stolpere regelmäßig wieder über dieses Video. Für jemanden wie mich, der zwei linke Hände hat, ist die Handwerkskunst dahinter einfach Klasse und das Ergebnis wunderschön

That's some crazy ass-whooping craftsmanship right there, chief. You have an incredible talent. Thanks for sharing. Now I got some ideas from you.

@FelixImmler

8 ай бұрын

Thanks a lot for your compliments!

Great video. Can you explain the finish on the handle that demands flames?

This is one of the best made videos of this type ever. Visuals are very well done and the sound track is the best I've seen since KZread yanked all of the copywrited soundtracks off of their platform. Awesome work!

@FelixImmler

3 жыл бұрын

I appreciate you positive feedback very much.. thanks for that!

@PeteK181

3 жыл бұрын

Sorry dude I went by twice but "best sound track I've ever seen"? I'm sure you meant heard and I agree it was pretty good, but best ever.

OUTSTANDING MATE!

wow. that last shot of the hatchet before and after is amazing. would definitely want to modify it like that in the future!

A labor of love. Very nice Felix.

@FelixImmler

3 жыл бұрын

Thank you so much!!

❤ Beautiful work Felix 👍

@FelixImmler

3 жыл бұрын

Vielen Dank Paul!!

Remarkable craftsmanship. I would love to learn this skill as a hobby.

probably the coolest music i've heard in a DIY video!

WOW! Fantastic work my friend!!!

@FelixImmler

3 жыл бұрын

Thanks for the visit my friend!!

What an improvement!! I really like this modification, Felix!

You sir, are a craftsman indeed!

@FelixImmler

Жыл бұрын

Thank you very much!!

Wow, beautiful work, it went from an $8 hatchet to a $120 hatchet.

@FelixImmler

Ай бұрын

Thanks a lot!

Saucooles Projekt! Vielen Dank fürs Zeigen, Felix!!!

Excellent work Felix, and I never realised the swiss army knife had a grinder attachment

@FelixImmler

2 жыл бұрын

Thanks for your comment! 😄

Tolles Video. Tuning-Videos gibt es eine Menge, aber immer, wenn man denkt "Tolle Sache, könnte ich auch mal versuchen", erscheint plötzlich ein Schmelzofen, eine Mega-Bandschleifer oder sonst etwas auf dem Bildschirm. Einfach nur normales Werkzeug und Geduld! Fantastisch!

@FelixImmler

Жыл бұрын

Vielen Dank für das tolle feedback!!

There's something very satisfying about cutting, grinding and polishing metal....

Outstanding craftsmanship. I’m speechless. A polished work of art. Good luck man!

@FelixImmler

2 жыл бұрын

Thank you very much!

@Alex-ui8xp

2 жыл бұрын

Art as an antonym to science maybe. The steel is still utter garbage, you may as well sharpen a frying pan. Bulk of the cost of a good axe is that it's a good alloy, and forged. This is chinesium.

Wahnsinn Felix, echt super was du aus der "Standard-Axt" gemacht hast! Mein tiefster Respekt!👍 LG aus Wels und schöne Osterfeiertage!

@FelixImmler

3 жыл бұрын

Vielen Dank lieber Willi!

Very impressive. Thank you so much for sharing. You've inspired me.

Wow, sehr schöne Arbeit👌 Danke für dieses Video!

@FelixImmler

Ай бұрын

Danke für das Kompliment!

The lumber the axe handle was made with is now worth 500 dollars :D

@zednotzee

2 жыл бұрын

lol, i found a 2x4 under my house last weekend and felt like i struck gold