Related videos: How to time a Pfaff 1245-706 kzread.info/dash/bejne/nnuc0bGsopyXos4.html How to time a Singer 241-12 kzread.info/dash/bejne/e36qypmyn7G0ZNY.html Adjusting of tensions for Paff 1245 kzread.info/dash/bejne/kX99rMSMZM7OqdI.html Adjusting of tension for Singer 241-12 kzread.info/dash/bejne/pH55sLqFgsu-gaw.html How to thread a Pfaff 1245-706 kzread.info/dash/bejne/eminsduPebyupJM.html

@eriettehernandezperez9120

2 жыл бұрын

No está en espanol

Most valuable KZread video I've ever watched! I spent all morning with an exact twin to your machine -- our paint is even worn the same way -- just to fix the problem of skipping one out of every fifty stitches, ended up with a mess. Tomorrow will be a better day, thanks to you!

@phototec

2 ай бұрын

My 1245 is skipping stitches also, did you get the skipping stitches fixed? Was your machine timing off and that caused the skipping stitches? Thanks

I love your video, thanks so much for sharing, my Pfaff 1222E timing was off, thanks to you, I got it back on track. You made me an subscriber. :-)

This is an excellent video explaining needle-hook timing. This is exactly how Juki (and Chinese clones) leather sewing machines work, too. Beginners must make sure to install the needle scarf facing the bobbin or the needle will collide with the hook every single time. Great video!!

@Cechaflo

4 жыл бұрын

Most of industrial sewing machines are timed same way. Thanks so much for watching this video!

Thankyou, great video and helped me identify where the issue/problem was with the spool

Thank you for this video. I was able to time my 1245 perfectly. Mine is a little older model so there were some differences, but it is running smooth and quiet!

@Cechaflo

2 жыл бұрын

I am so glad the video is useful! Thanks for watching!

Best walking foot timing video!!!!!!!! thank you

@Cechaflo

4 жыл бұрын

I am glad the video is useful! Thanks so much for watching!

"MASTER"CRAFTSMAN! Excellent work my friend. I enjoy your videos. thank you for sharing

@Cechaflo

4 жыл бұрын

Thanks for kind comment!

Woow muchas gracias! Este tipo de tutoriales necesitaba para poder entender como funciona la máquina, al ser nueva en esto, hay muuchas cosas por aprender.. Gracias, Dios lo bendiga.

@Cechaflo

4 жыл бұрын

Estimada Marisol, ¡me da mucho gusto que este video le haya inspirado! ¡Muchas gracias por ver los videos!

@CarmenMartinez-ni3zs

4 жыл бұрын

@@Cechaflo hola don Cesar gracias. Por subir videos son buenos para aprender tengo una pregunta como puedo ajustar la tension tengo una consew 206 no si tiene algun video de ajuste gracias Dios lo bendiga.

@Cechaflo

4 жыл бұрын

@@CarmenMartinez-ni3zs Este video puede ser útil : kzread.info/dash/bejne/kX99rMSMZM7OqdI.html Este otro también ayuda a entender el ajuste de tensiones:kzread.info/dash/bejne/pH55sLqFgsu-gaw.html

im buying pfaff 1245 soon, ill refer to this video if i got any problems! thanx!

Great video. Much appreciated

thank you for these information

@Cechaflo

4 жыл бұрын

I am glad to share. Thanks for watching!

Very brilliant 👌👌👌👌

Gosto muito da maneira que você trata essa jóia da pfaff 1245 , também tenho um grande carinho pela minha . Um abraço companheiro , saudações.

@Cechaflo

4 жыл бұрын

I am glad the video is useful! Thanks so much for watching! A big hug for you, too!

Very very gratefull..

Gracias por la informacion

Me gusta como demuestra ,de casualidad prodia hacer uno para doble hauja en poste compre una pero esta desicalibrada y el presser foot esta bien afuera y no entran en los hollos de avajo , esuna singer 138wsv102hp y no tengo idea donde empesar ,selo agradeseria demaciado don cesar , saludos desde kansas city ,

Yes, just pulled some bits of my new chinese machine, to deburr components, had removed the rack and pinion to the bobbin. Wondering how to set up the timing. Then along comes "chechaflo". Thank You.

@Cechaflo

4 жыл бұрын

I am glad the video is useful! Thanks for watching!

Thank you so much for the Video, i have a pfaff 545 h3 i have Problems with Timing, i did the same steps, what you did ,but everything did not work .😔😔😔😔

thread broke while sewing on my pfaff 1245.. I removed the bobbin (3 screws) and removed the thread.. now it doesn't want to sew.. if it sews I need to bring the needles lower than what it was.. what do you think is wrong?

Hola , que altura tiene de la chapa aguja a la punta de la barra de aguja en punto muerto inferior?

Agar shuttle ma daga phasa tho kasa nikalna ha

Hola me gustan tus videos tengo una maquina PFAFF 145 no puedo arregular la costura la hace muy chica y tiene quiero que aga la costura mas larga podras hacer un video como arreglar ese problema estoy suscrito a tu canal gracias.

@Cechaflo

4 жыл бұрын

La Pfaff 145 es muy similar a la 545 y a la 1245. Muy buenas máquinas industriales. Me parece que la puntada mas larga es de 6 mm igual a la 1245 que muestro en el video. Trato de entender que estará pasando con su máquina. A lo mejor los dientes de arrastre están muy bajos y no alcanza a jalar el material. Puede estar el problema también en la palanca reguladora de puntada. Es necesario también que estén sincronizados, el peine de arrastre, la aguja y la patita pequeña, porque su máquina es de triple arrastre.kzread.info/dash/bejne/h2d8pLp7dKexn9I.html Ojalá pueda solucionar pronto este problema.

Thank you @Cechaflo for the video, this explains really clearly how the machine works. I have a slightly more recent model (all white and more square) Pfaff 1245, adjusted it according to the manual and following the same steps in your video. I sew nylon webbing and fabric, with varying thickness, and it seems the machine is not able to make strong stitches with lighter materials. The stitches are weak and don't always fully complete due to the lack of tension. Sewing very thick stuff seems to be alright with decent tension and stitches. Is there a way to adjust it for lighter fabrics? Already went through the timing procedure multiple times, tried many tension combinations and running out of ideas on what to try. I have another walking foot which has no problem with the same thread needle fabric combination.

@Cechaflo

Жыл бұрын

Perhaps you shold adjust the time a very little faster to catch the upper thread loop faster. It helps to alleviate the upper tension. You would not need to tighten it too much. Some plastics while sewing the holes get closed causing disadjustment. The solution is a bigger needle to make a wider hole in the plastic material. For lighter fabrics the first step is the use of a thin needle and thread. It could be a 90=14/ 100=16 and 110=18 needle size with a thin thread 69 or 46 size.

@samuelhatin793

Жыл бұрын

@@Cechaflo Thanks I'll test it out!

Excellent video. Do you have a video that shows proper presser foot pressure?

@Cechaflo

2 жыл бұрын

I do not have this video.

Vert nice

Hola que tal ,le hago una consulta he comprado una maquina de poste marca pfaff 193 -705/03 y no se como ajustar la puntada ,sabe usted como puedo hacerlo ? Gracias por sus videos

@Cechaflo

3 жыл бұрын

Estimado Edgardo, nunca he tenido una máquina de ese modelo y no tengo idea donde esta el regulador de puntada que si debe tener. Puede estar en la tapa superior del cabezal el mecanismo. De ser así debe estar un botón el que hay que presionar para que desenganche y mueva el peine de arrastre, mientras se mueve el volante de la máquina en vaiven. Para adelante mas puntada y para atrás menos hasta cero. Sería parecido al modelo Singer (min dieciséis:20) que si regula puntada pero no tiene reversa. kzread.info/dash/bejne/ZpWcj9WCoLWtnqQ.html Si no se le encuentra ningún regulador, es muy posible que sea de puntada fija de 3 mm de largo que es lo mas usual en la fabricación de zapatos.

Con ese video pude poner a tiempo mi máquina y ya no ocupo al mecánico al menos para ponerla a tiempo

I have a Necchi 958-101 walking foot machine. I have a problem while sewing and that applies to stitches. The stitches are uneven. By no means can't adjust the thread tension because when I sew slowly, it is somewhat fine or more pulls the upper thread and when I sew quickly, then the upper thread pulls the lower one and can be seen on the stitches. I used your videos as a reference to set the timing but again it's not the same machine, so I would ask you if you can tell me what the problem is. I would be very grateful.

@Cechaflo

3 жыл бұрын

Perhaps, the problem is in the bobbin tension. The bobbin has a little metal sheet that acts as a spring. Due to daily use, it looses the resilience property. kzread.info/dash/bejne/kX99rMSMZM7OqdI.html

@srkiiq08

3 жыл бұрын

@@Cechaflo Thanks for your reply I tried everything. That's not the point either. Maybe it's a bigger breakdown. In the end, I will give up because I don't have a machine repairman in my city Sorry if English is bad, because I use google translate

Howdy...parts finally came in and it has forced me to realign quite a bit and retime. I can get my 1245 stitching fine forward, but when back stitching, I'm bending or breaking needles eventually...especially when moving fast for long runs. The bend is at the scarf and towards the bobbin holder. Do I just have the needle too close to the bobbin case when I start the adjustment...or perhaps too much top tension causing the needle to bend? Any tips for solving my problem? Thanks again!

@Cechaflo

Жыл бұрын

I cannot figure it out yet. My only advice would be to set it in reverse and by hand move the hand wheel to search what is rubbing and causing the issue.

@reckonill

Жыл бұрын

@@Cechaflo When you set you initial positioning, should the needle lightly touch the bobbin case, or should there be no contact?

@Cechaflo

Жыл бұрын

@@reckonill Practically the needle belly passes close to the bobbin case(no touching) kzread.info/dash/bejne/ooV7ssaiiZnTabg.html

If i want yo chanje thé timing belt how l can do this

Hey I am really impressed by stiching so I wanted to know which thread and what size thread do you use.

@Cechaflo

4 жыл бұрын

Upholsterers as a daily basis mostly use the standard polyester thread number 92 kzread.info/dash/bejne/qKia1MV9g5i9erQ.html www.thethreadexchange.com/miva/merchant.mvc?Screen=CTGY&Category_Code=polyester-thread-092

Will this video tutorial work w the 145 as well?

@Cechaflo

3 ай бұрын

Procedures are similar.

I have the exact machine pfaff 1245 and it skips a stitch here and there is it the needle? Because every needle i install is the same.is it the timing? Please help me

@Cechaflo

2 жыл бұрын

Before doing anything, check if the needle is the correct one. I have read that the system for a 1245 is 135-17 (the needle is 44 mm long approx. from the butt to the point) The needle bar goes downwards to a dead point. It should go upwards then. The upwards movement of the needle bar should be at most 3 mm. This is the moment the hook point of the shuttle should be in the middle of the needle scarf...I mean above the needle eye. This little upwards movement causes the upper thread to loosen and forms a loop that is caught by the hook point of the shuttle. Notice that the hook point should pass very close to the needle scarf. If it is a little far away it causes the skipping of stitches. Do not forget thin needles for thin materials. If I would sew a thick material with a thin needle it could happen that the needle bends and the hook point does not reach the formed thread loop. kzread.info/dash/bejne/kX99rMSMZM7OqdI.html I hope this information is useful!

Essa regulagem da lamcadeira serve para pfaff 546 tbm

@Cechaflo

3 жыл бұрын

I cannot assure that, sorry.

Quería saber altura que tiene la punta de la barra de aguja con la chapa aguja en punto muerto inferior, usando aguja DPX17.

@Cechaflo

2 жыл бұрын

En mi máquina la tengo a 17 mm del nivel inferior de la barra de aguja al nivel del peine que tiene el hoyo para que pase la aguja. Tomé medida en el punto muerto inferior. No tengo idea cual es la medida exacta al salir de fábrica.

@sergioezequielmamani6366

2 жыл бұрын

@@Cechaflo muchísimas gracias, muy amable, usted es un maestro...

@Cechaflo

2 жыл бұрын

@@sergioezequielmamani6366 Estimado Sergio, ¡Muchas gracias por ver estos videos! Un cordial saludo.

Cechaflo, vivo en wisconsin, en donde puedo comparar precios de la pfaff y durkopp usadas y nuevas. Con mucho respeto a otros tapizeros que sigo, tu eres el mejor para mi, la atencion al detalle que pones en todo lo que haces me enconta. (Muchas Gracias)

@Cechaflo

2 жыл бұрын

Estimado Juan, Solamente partes nuevas por internet provenientes de fabricantes en China: Amazon, Ebay, AliExpress, etc. Por ejemplo:www.amazon.com/Kunpeng-Industrial-Machine-HPF-151-CP-HPF151/dp/B07798TBWJ www.amazon.com/KUNPENG-91-141536-90-11-330964-15-Assembly-Machine/dp/B07GJF4GKY www.amazon.com/KUNPENG-Needle-PFAFF145-SEWING-MACHINE/dp/B0774FKNXK www.amazon.com/-/es/Tension-Assembly-91-009328-91-PFAFF-Modelos/dp/B07GYW1265 Para la Adler y otras es lo mismo. De partes usadas desconozco.

@juanfortuno7120

2 жыл бұрын

@@Cechaflo (Gracias, Gracias, Gracias).

@juanfortuno7120

2 жыл бұрын

(Cechaflo) no me explique bien, yo quise decir maquina completa, no partes, gracias.

@Cechaflo

2 жыл бұрын

@@juanfortuno7120 Por internet en mercado libre puede conseguir máquinas industriales usadas de diferentes marcas. En esta página también encuentra y sería mejor que fuera personalmente a escoger su máquina: www.advancedsewing.com/usedsewingmachines.html En Craiglist también: losangeles.craigslist.org/d/for-sale/search/sss?query=Industrial%20sewing%20machine Sailrite también vende máquinas industriales para tapicería:www.sailrite.com/Sewing-Machines

Price please Iwanted to byieng dhis machine

You don’t show how to time it, just how it works. What when the needle is above the needle plate before the hook goes by?

Greeting from Colombia, I require your collaboration, I am doing maintenance for a pfaff 1245 machine, I want to know if the height of the needle bar should be moved to 17 or 18mm so that I can sew leather with a plastic package that is to ensure hooks to the car seat. What happens is that the needle when sewing this material breaks the thread. Can you please tell me if it is advisable to raise the needle bar 18mm or should it be left as indicated by the manufacturer in its manual at 15mm. First of all, thank you very much and I look forward to your comments. sorry for the english, i use google translator. Cordial saludo desde colombia, requiero de su colaboracion, estoy haciendo un mantenimiento para una maquina pfaff 1245, quiero saber si la altura de la barra de la aguja se debe mover a 17 o 18mm para que cosa cuero con un empaque plastico que es para asegurar ganchos a la silla del carro. Lo que pasa es que la aguja cuando se cose este material rompe el hilo. me puede indicar por favor si es recomendable subir la barra de la aguja 18mm o se debe dejar de manera como lo indica el fabricante en su manual a 15mm. ante todo muchas gracias y quedo atento a sus comentarios. disculpas por el ingles, utilizo google traductor.

@Cechaflo

2 жыл бұрын

Estimado Fernando, mi sugerencia es no alterar y dejar la altura de la aguja en su posición normal como viene de fábrica. En mi punto de vista la rotura del hilo es por otro motivo. Sucede mucho con materiales plásticos que al pasar la aguja con el hilo se 'ajustan' y no dejan que el hilo superior forme el 'bucle' debajo y el gancholo agarre. Mas bienpasa rozando, lo deshilacha y lo rompe. Me parece que la solución es usar una aguja de punta redonda y mas gruesa, para que abra agujero dejando que el hilo pase libremente y haga su ajuste(lockstitch) correctamente.

Que modelo de cámara usas para este video tiene buena calidad. Gracias

@Cechaflo

4 жыл бұрын

Una disculpa, no vi el comentario hasta hoy. La cámara es Canon Vixia HF R42 53X Advanced Zoom 32X optical Zoom

@pfaff145tippmann7

4 жыл бұрын

Cechaflo gracia tarde pero seguro😀 .si no es mucha molestia me puedes decir cuantos milímetros de largo hace la puntada tu máquina PFAFF 1245. Quiero comprar una de ese modelo pero quiero saber si hace larga la costura.

@Cechaflo

4 жыл бұрын

@@pfaff145tippmann7 La 1245-706 da 6 mm máximo de puntada. La 545-H3 es muy parecida. También está la 145 Estas versiones son antiguas fabricadas en Alemania. La versión moderna de 1245 da 10 mm de puntada máxima. La patente es alemana y fabricada en China.

@pfaff145tippmann7

4 жыл бұрын

Cechaflo gracias por la I formación . Pensaba que hacías 8 mm la que tienes.tengo dos Maquinas la PFAFF 145 H4 y la PFAFF 545 H4 y al igual hace 6 mm no mas de 6. Boy a mirar la nueva que me dices.quiero una que de 10mm ho 8mm. Muchas gracias 😊

@Cechaflo

4 жыл бұрын

@@pfaff145tippmann7 Esta es la Pfaff 1245 versión moderna que da 8 mm kzread.info/dash/bejne/jJpsuteDccu5f9o.html www.pfaff-industrial.com/en/portfolio/sewing-machines/flat-bed-heavy-duty/pfaff1245 Esta Juki da 9mm de puntada.www.amazon.com.mx/JUKI-dnu-1541-Walking-m%C3%A1quina-coser-industrial/dp/B005I5DU4U Esta Consew da los 10 mm de puntada.www.consew.com/view/consew-model-206rb-5

Is it possible to sew thin materials on this machine?

@Cechaflo

3 жыл бұрын

According to Pfaff 1245 manual the thinnest needle for this machine is 110 (european measure)=18 (american measure) This needle can be used for thin leathers and medium fabrics(denim). It is not advisable for too thin fabrics because the needle hole in the feed dog is big and the material could be pushed in down through.

@oguzturku4992

3 жыл бұрын

@@Cechaflo Thank you for the information. And at what price can you buy such a car, (but used) in Europe?

@Cechaflo

3 жыл бұрын

@@oguzturku4992 I have no precise idea, but I have found some information:www.anglosewing.co.uk/used-industrial-sewing-machine.html www.hobkirk.co.uk/industrial-sewing-machines-used?page=all

Good God to you

@Cechaflo

4 жыл бұрын

Thanks for kind comment!

Faaf 1245 masin he usi taimng kesi seht kre

you deserve a subscribe at least

Как дела! Здоров? Все o.k.?

Is it for deaf??? No sound!others we like noise

should be about the same with an older 145 H3 I think to

@Cechaflo

2 жыл бұрын

Yes, the Pfaff 145 H3 is very similar to the 1245 I show in this video.

@LeifDjurfeldt

2 жыл бұрын

@@Cechaflo just did it! :) Thank you!

Ks9910 timing sting

এই মেশিনের নাম টা কি একটু জানাবেন প্লিজ

@Cechaflo

Ай бұрын

Pfaff 1245-706/47

@SkSk-wo8kq

Ай бұрын

@@Cechaflo ভাই মডেল নাম জিজ্ঞেসা করি নাই মেসিনের নাম টা কি

😮I’m soooo confused

@Cechaflo

Жыл бұрын

If you have the same machine, feel free to let us know your concerns.

Pörfekt

0:29 what on earth is wrong with ur finger

No damn good. Does not show step by step how to do the timing!

@Cechaflo

5 ай бұрын

Hopefully this other video might be useful kzread.info/dash/bejne/nnuc0bGsopyXos4.html