GET MY FREE EBOOK! www.weaversofeternity.com/freebook

@patchristopher5491

3 жыл бұрын

Hello

@pedroleitaoazevedo9932

10 ай бұрын

​@@patchristopher5491j😮.8

Hi Tim. I have only been following a few weeks now and wanted to say thanks for these tutorials. The siding part that you are eyeing is actually a Fishermans Knot. This one is done what we call a single. If you ,ale an additional loop around then it is a Double Fishermans Knot. You can also do a Triple. You can always tell when it is tied correctly by the X the the loops will form. When you tie them in to the loop that you have done then this loop, when cinched down is called a Prusik Loop. Another great loop used for climbing and rescue work. I tried to leave this in the comments below where everyone was asking what it is called but it wouldn't let me. Thanks again and keep them coming.

@TheWeaversofEternity

9 жыл бұрын

Eddie Miller Thanks for the info Eddie, I appreciate your feedback! Glad to have someone like you watching my videos! :)

@TheRiverMonkey

9 жыл бұрын

The Weavers of Eternity Paracord Tutorials only thing I would throw caution to anyone who uses this, and the way your using it it may never be a problem, but if the two knots are drawn together and loaded, then they could have to be cut loose. These are intended to be PERMANENT. As in FOREVER lol. However if they are drawn together it would make the loop bigger not smaller so it probably would never be an issue. Just keep it in the back of your mind that there is always a chance. On the cool side know that these knots are damn near 100% load rated. They don't degrade the working load of the loop. Good job on the videos. Keep them coming .

It took me a couple of tries to get the knot itself down, but it looks great. By some miracle I got it centered and tied the sliding knots perfectly on the first try. I haven't taken it off since I made it.

Just wanted to thank you so much for sharing these video tutorials, they've been a great help and are always great to go back and re-watch whenever I need to brush up in a particular knot. 😁👍

Me ha gustado el tutorial, te has tomado tu tiempo para explicarlo sin prisa. Me encantan tus pulseras.

Awesome tutorial!! Got it perfect on the second try!

thanks for the tutorial:D i use this technic but i replace the eternity with the clover knot and it looks great.

I'm in love to your videos! Thanks for sharing!

GRACIAS EXCELENTE EXPLICACION MUCHAS MUCHAS GRACIAS

Exelente, felicitaciones desde Argentina, muy bien explicado simple y facil.

So beautiful,, thank you.

Your explanations are always clear and succinct. Went over to Bored Paracord's tutorial for this bracelet and he had a good tip for the "twist" part which may help people having trouble. Thanks again for the great tutorials!!

Thank you very much for the tutorial. Very good explained

Thank you so much!

Very good, simple video.

Simpel and nice bracelet. Very nice for kids! Thnx!

Thanks for the tutorial. Really liked the video.

Thanks that's rlly good

a very simple, easy and best way to make it..

Good thing i checked this out. I have a yellow slimmer cord than that. I can make a single strand and a knot just like my name, trinityknott. Thanks BiiiG!

I think you are one of the best. Thanks!

Linda ' eu fiz e adorei

thank

thanks made it easy to follow

Nice indeed.

Coool love it!

super cool and easy

Very cool. Thank you. Made it for my wife. Very minimal, very easy. Like the slip knot, as it seems to be very similar to a prayer bead.

@TheWeaversofEternity

10 жыл бұрын

Cool! I'm sure she'll really like it. Glad the tutorial helped you. Thanks for watching and commenting Matt!

Thanks a lot😊

Thanks 👍

I made this for my mom and she loved it thank you!!

@TheWeaversofEternity

9 жыл бұрын

Lane strange Awesome! Glad she loves it, you're welcome and thanks for letting me know! :)

Wow, got it on the first try!

Buenos dias

👍Great tutorial, yay, 😃I can make the eternity knot but 😩😔 I can’t seem to make those two end sliding knots...gotta keep practicing. Thanks.💞

Thank You So Much! I Made A Best Friend Eternity Bracelet And I Hope He Will Like It (Which He Will Haha) Keep The Videos Coming! I Love Them!(:

@TheWeaversofEternity

9 жыл бұрын

Jocelyn Gomez That's great! I'm sure your friend loved it. Thanks for watching my videos Joceyln!

I love you, Awesome I LIKE IT

Great tutorial, I was just wondering, what is the specific colour of the cord you use in all your videos? It's lovely and muted. Cheers from down under.

I really enjoyed your videos thank you so much Tutorial is great and easy to understand

@TheWeaversofEternity

9 жыл бұрын

Igor Butorin Awesome, glad you like the videos and I'm glad you were able to follow them! Thanks for watching and commenting! :)

I got the eternity knot on the first go but then another 30 minutes on ONE of the two sliding knots and then another 20 on the second! It owuld be helpful to hear some advice on how to position the two knots in relation to the eternity knot and on how to size everything so , when closed, the two knots don't come out right next to the big knot and assymetrical to each other.

@maddiebug90

7 жыл бұрын

If they're not symmetrical to each other, you can adjust them once you get everything finished (Minus cutting the ends!!) First, you have to figure out which knot you need to adjust to where you can still get it over your hand for it to fit. Then you take that knot, and cinch it up more to where the slack is out. So, where you find your slack, follow that to the knot, and use that slack to follow through the knot, getting the slack out. (Sorry if this is confusing, it'd be much easier to show on video.)

Haha lol got it first try 😂

you guys are soooo great :) thanks!!

@TheWeaversofEternity

9 жыл бұрын

Paul D You're welcome Paul! Thanks for watching and commenting!

Hi, Tim! Thank you for the tutorial. You made it so easy! I'm going to make this for my friends. ~P India

@TheWeaversofEternity

10 жыл бұрын

Pragati Awasthi Hello Pragati! You're very welcome, I'm glad this tutorial helped you out. I hope your friends enjoyed them! :)

Wonderful to make one for your love

Just had to say thank you for posting this I surprised my girl friend with it and her daughters fell in love with it so I just made them each one

@TheWeaversofEternity

9 жыл бұрын

Jim Akin That's great Jim! I'm glad they loved it. You're very welcome and thanks for watching and commenting!

Looks great!

@TheWeaversofEternity

10 жыл бұрын

Thanks!

I love it

@LucaCeseracciu

8 жыл бұрын

GINNASTICA ARTISTICA

Will be making that one :)

@TheWeaversofEternity

10 жыл бұрын

Awesome, have fun!

@gage norris yes it is or also a double half hitch

It's much easier to tighten/loosen if you only loop it around once, then put it through. Then to adjust, simply pull the loose ends

@TheWeaversofEternity

10 жыл бұрын

Joe Maddux Great tip! I think I looped it twice because I liked the way it looked that way, but of course looping it once would be just fine too. Thanks for commenting and sharing! :)

I am very interested in this.

Hello world. First bracelet ever. Done :)

First try, nice tutorial!

@TheWeaversofEternity

10 жыл бұрын

Awesome, good job! Thanks for watching and commenting. :)

Great Video! It helped me out a lot :D

@TheWeaversofEternity

10 жыл бұрын

Great! Glad it helped you out, thanks for watching and commenting Anna! :)

Cool

I going to try this, looks so simple, let's see!

@TheWeaversofEternity

9 жыл бұрын

Rosalyn Lopez Awesome! Hope yours turned out well! :)

I like that simple cool

@TheWeaversofEternity

10 жыл бұрын

Thanks! I like it's simplicity too!

spanish. MUY HERMOSO TRABAJO, ADMIRABLE, ME GUSTARIA COMPRARLAS, ADEMAS EL BUDA PEQUEÑO ESTÀ INCREIBLE....! ADMIRACION Y CONGRATULACIONES.....UN HERMOSO Y GRAN SALUDO.DESDE CHILE, CIUDAD PUNTA ARENAS.

I believe the nots for the sliding knot is a clove hitch. I am a scout

@jgoodwin1598

5 жыл бұрын

Toxic Shadow it’s a double fisherman knot we use it in fire / rescue. It will retain the ropes strength and integrity. You can use it for a tie off if needed.

Hi , Thanks. I'll make some with students,

thanks, your video is so good!

@TheWeaversofEternity

9 жыл бұрын

Miguel Maciel You're welcome! Thanks for watching!

@miguelmaciel1863

9 жыл бұрын

thnaks to you!!!

i just started making paracord bracelets about 2 weeks ago and am loving it.. just can't get 550 or any kind of good paracord here in Lagos.. thanks for your tutorials they have been very helpful

@TheWeaversofEternity

8 жыл бұрын

Awesome! Thanks for watching my vids. :)

@ruready4adventure743

7 жыл бұрын

Mochedda Ovastand Can you gain access to Amazon?

@daremocheddaabiola4952

7 жыл бұрын

Hi.. no its quite difficult to get from amazon due to restrictions and exchange rates.. but I have started a small youth empowerment programme (teaching teens how to make these bracelets) to keep em off the streets, we are hoping our local gov steps in to help us out with acquiring materials. Your videso are changing lives here, thank you.

Beauty full

You are a genius

@TheWeaversofEternity

8 жыл бұрын

Wow, thanks for the compliment! But I wouldn't go that far. ;)

Just made one with a slighter and thinner rope. The Eternity Knot is not really appeared, but yeah... looking forward to make another one, thank you!

@TheWeaversofEternity

9 жыл бұрын

Vanessa Adriaansz Sweet! Yeah, using a thicker cord or rope does help the eternity knot to be more visible. Hope you made another one! :) Thanks for watching and commenting!

I think that sliding knot configuration is called a double fisherman's knot. Anyway it is one of my favorite knots to make. Thanks for the cool vid

@TheWeaversofEternity

10 жыл бұрын

Ah I see, thanks for the info and thanks for commenting and watching!

"Aaaand...that's about it!" till eternity xD

@TheWeaversofEternity

8 жыл бұрын

+Roberto Baldini lol

Great video. Your tutorials are some of the best. I was wondering. Your cord in most of your vids look super soft. Mine is from reputable sellers but a little stlff and can be hard to do loops with. Do you prewash your cord prior to use. Or do something to it to soften it? Thanks and I look forward to more videos.

@waykno8478

4 жыл бұрын

A company named Gladding makes a stiffer cord--hard for me to use in knotting. Most places selling 550 don't give you the manufacturer.

I love this... #Indonesia

@TheWeaversofEternity

9 жыл бұрын

Hendy Alfeus Glad you love it! :)

Nếu bị cân gan bàn chân mình có ngâm chân nước nóng được không bác sĩ . Cám ơn bác sĩ

真不错。。。。

IT IS SO AWESOME. THANK YOU VERY MUCH MAN +1 SUB FROM ME

Thankyou for the tutorial. It works great, however I have a question. I did the sliding knot closure but its incredibly tight to slide - is that because of the quality of the paracord Ive used (it was pretty cheap). Cheers, really like your channel. :)

@TheWeaversofEternity

7 жыл бұрын

Thanks for the comment! As for your sliding knot, you may have tied the knot too tightly. If not then it may be your cord.

i from brazil

Where do you buy para cord?

thanks you helped me a lot I have made some money trying to sell some braclets

@TheWeaversofEternity

9 жыл бұрын

Holden Mann Awesome, saving money and making some money selling bracelets is great!

@its_justholden

9 жыл бұрын

Ya u rock thanks I have been working hard and so have you keep up the good work

it's very butefull

@hha8356

6 жыл бұрын

Wtf

ur directions is really cool n simple. I made my first one perfectly. but the paracord I purchased is really hard, it doesn't look as soft n nice like urs. which brand of string u r using...please help me with this.. loads of thanks from India :)

@TheWeaversofEternity

8 жыл бұрын

+Priyabrata Rout I'm using polyester 550 paracord. Brand is Rothco and RW Rope

Where do you get your paracord

Thank you very much for sharing your knowledge, I only speak Spanish and it is difficult to translate, could you tell me which is the measure for this bracelet?

@TheWeaversofEternity

9 жыл бұрын

Marianela Guevara No problem, you'll need about 50 cm of paracord to make this bracelet. I hope that helps!

I DID IT...it took 20 minutes but I DID IT! btw,thnx

@TheWeaversofEternity

9 жыл бұрын

Sam S Nice! Glad you didn't give up, you're welcome!

HOLA : TIENES PULSERAS Y BRASALETES MUY BUENOS , ME GUSTARIA PODER COMPRAR , PERO ESTOY MUY LEJOS.....Y NUNCA HE SABIDO SI LOS VENDE...! SIGO CADA UNO DE SUS VIDEOS.

Are you actually working in "live" mode on your dslr, and looking in your small rear screen? Clever chappie. Often wondered how you did it. Cheers, Mal

@mariazavalla6130

7 жыл бұрын

Image BLOGGER

bello

@TheWeaversofEternity

7 жыл бұрын

hi :)

hay, firstly nice vid as always. What kind of paracord to you use?im in the UK and using 550 paracord (7 strand) and it does not seem as think as yours?is this what you use?

@TheWeaversofEternity

10 жыл бұрын

Thanks! I use 550 as well, but sometimes different manufacturers produce 550 that's not exactly the same. The one I'm using might not be military spec paracord too. That might be why your paracord is different from mine. Hope that helps!

@dumbsey

10 жыл бұрын

Weavers of Eternity Cheers dude.Thanks for the reply, i might check different suppliers!

me too

Any tips on how to keep the eternity knot centered between the sliding knots, mine keep coming out more to one side.

@TheWeaversofEternity

8 жыл бұрын

+WhiteyGraphics Use a longer piece of cord and just cut off the excess so that it's centered. That would be the lazy way out instead of re-doing it over and over.

Is it possible to smoothly make this bracelet with two colors? What I mean by smoothly is have both colors symmetrically in the knot and have the joined portion of the strands be hidden from view.

@TheWeaversofEternity

7 жыл бұрын

Hmmm... that sounds quite difficult. If I can think of anything, I'll be sure to share it.

question: how close to the end should I start with the eternity knot?

@TheWeaversofEternity

8 жыл бұрын

+Joseph Blankenship Hard to say, you'll have to play around with it. I'd say it's really more close to the middle if that makes any sense.

what's name of the used rob?

are there different sizes of paracord and if so, what is the best size?

@TheWeaversofEternity

8 жыл бұрын

+tracy s There are a few different sizes. In my videos I use 550 paracord unless otherwise stated.

I got the knot the first try, but cant get the sliding knots to come out even around my wrist. Still trying.

@TheWeaversofEternity

9 жыл бұрын

Joe McCranie yeah it takes a bit of playing around with, don't give up!

Hola , quiero saber como sé llama el cordon . Saludos

@a.c.m.3312

5 жыл бұрын

Nudo de la eternidad.

Tim - I do love this video, very easy to follow along. However, I do worry about your fingers; they look "weathered". Please take care of them. Namaste.

@TheWeaversofEternity

8 жыл бұрын

+Michael Hoshall Thanks Michael! At the time of making this video I was working heavily with my hands as I was running and operating a painting business. I'm no longer doing that, so my hands are much better now. They still show wear from all the manual work I've done, but they're much better now. :)

@bingo1232

8 жыл бұрын

+The Weavers of Eternity Paracord Tutorials Gald to hear it!! Keep up the GREAT videos!!

My first try turned out nicely :) But it looks weird cause I used a shoelace... The Netherlands don't have paracord anywhere nearby :(

@TheWeaversofEternity

10 жыл бұрын

Ahh ok, well I'm glad you at least tried it out! Have you tried ordering paracord online? I'm sure there are some sellers out there that will ship to the Netherlands.

@dutch_blades

10 жыл бұрын

Yeah, there are ;) Looking for some nice beads and stuff aswel :) Talking about nice beads for knives and knives... When does the challenge end? :p

hey bro, saludos all the way from Nicaragua in central America, im trying to learn through your tutorias, they are neat :), i dunno a translation to paracord nor could i find one in google... T.T, so im gonna try by brand, what brand of paracord do you use?

@TheWeaversofEternity

9 жыл бұрын

Fernando Hernandez Hey Fernando, the paracord I use is 550 paracord from RW Rope Company, but sometimes I also use Atwood Rope paracord. Most of the made in USA paracord is the best.

@lawferran

9 жыл бұрын

The Weavers of Eternity Renaissance thnx! went to atwood and they have diferent sizes, 5/8, 7/16, etc... which is the one you use?

@lawferran

9 жыл бұрын

The Weavers of Eternity Renaissance www.atwoodrope.net/shop/custom.aspx/know-your-rope/5/

@baronteddyvonforsthoffer2567

9 жыл бұрын

I bought some at the market in Masaya. It's too small and too hard. Maybe ebay has some good deals.

@lawferran

9 жыл бұрын

John Forsthoffer yup so i went to the atwood and they have diferent sizes, just waiting on TWER reply to start looking for someone or a way to bring some to Nicaragua to practice and make numbers just to see if i can actually do it here :) thnx for the info though:)

do you still upload videos/make videos?

Hi, what is the diameter of paracord?

Do you know how to tie the Arms-Akimbo knot? is similar to this one...

@TheWeaversofEternity

8 жыл бұрын

+HyO Startup I'll check it out!

what diameter of paracord is best for bracelets?

@TheWeaversofEternity

8 жыл бұрын

I mainly use 550 .

How do you get the knot in the middle of the bracelet? With my tries it's alway a little out of the middle.

@TheWeaversofEternity

9 жыл бұрын

Ciedric2 You kinda just have to play with it and tie it a few times so that it ends up in the middle, or you can just use a really long piece of cord and cut the ends so that they're even.