Very nice description, thank you for that!

@ReelTeaseFishing

3 жыл бұрын

Thank you for watching!

Cheers I’m doing my motor tomorrow, the video help thanks🤙

Thank you so much. It's a perfect video for me.

Great content dude , thank you.

@ReelTeaseFishing

Жыл бұрын

Glad you liked it! Thanks for watching

Excellent

I think cleaning and reusing the thermostats is fine as long as their not terrible to begin with. They are easy to test after cleaning. This can save you any surprises on the restart.

@ReelTeaseFishing

3 жыл бұрын

Yes they definitely can be re used. and cleaning them in vinegar overnight is a cheap way to bring them back to a shiny and clean look. Retest is always recommended before putting them back

Cual es la temperatura normal en un yamaha 15 enduro

You don't have to take bolts out in any particular pattern it makes no difference at all. Putting them back in, you should use an alternating pattern to tighten them down. Half Force alternating across and back and forth and then final tightening full force alternating back and forth across. This is coming from a 40-year marine mechanic

@ReelTeaseFishing

3 жыл бұрын

Thanks for watching and the advice. Like you mentioned. Taking it off doesn’t matter the pattern, it’s just convenient for me and has become a habit.

عايز شرح اصلاح وصيانة المحركات البحرية الاوت بورد ياماها

nice--they should be a fail safe meaning they stay open when broke. mine is open as water discharge does not change temperature and I don't have any problems except that bolts have not moved and they are alminume and will sheer off so I will heat them or leave it alone since I live in mild Temperature of Texas and don't need it .

@ReelTeaseFishing

3 жыл бұрын

Sometimes the build up of salts and corrosion will actually keep the thermo from opening. thus why regular maintenance is a good idea. keeps things turning and keeps a piece of mind. however a sheered bolt may be a bigger pain then digging into something that's not giving an issue.

Aluminum bolts? dude...

How do you check if it’s still working? Trow them in hot water?

@ReelTeaseFishing

Жыл бұрын

You can double check with the manual or part number at what temp they open. Then carefully with a thermometer in place you can heat the water and see if the open witching the proper range. Then also take note to see that they fully close when in cooler water 👍🏽

Is it the same for the fresh water motor

@ReelTeaseFishing

5 ай бұрын

Yes it is

Why don't manufacturers add grease or anti corrosive to bolts during assembly?

@ReelTeaseFishing

2 жыл бұрын

I think they do spray them with an anti corrosion spray but it’s only really for shipping purposes.

@paulwhittaker3855

2 жыл бұрын

Yes several do spray the outside for transportation. Obviously does didily squat for bolt threads. 😃

After a good soak in pure vinegar for 24 hours use a hard bristle toothbrush and brush off the entire thermo specially the plunger that opens/closes the thermo.

@ReelTeaseFishing

4 жыл бұрын

That is solid advice, thank you

So you dont need silicone sealant with the paper thermostat gasket?

@ReelTeaseFishing

Жыл бұрын

Nope Clean the area and apply the oem gasket. That’s all you need.

@crazycrea

Жыл бұрын

@@ReelTeaseFishing Thank you very much i appreciate it.

Aluminum bolts? Really? Where have you ever encountered aluminum bolts? They are stainless steel

@ReelTeaseFishing

2 жыл бұрын

Mix of words,

@mikekennedy480

Жыл бұрын

Actually they’re galvanized

Should hv showed the torque dude