How to Test Motor Start and Motor Run AC Capacitor of ac fan and compressor
In this video, I have tested a 440VAC 30 MFD start capacitor by using 4 different methods. So that if you don't have a Capacitance meter, still you can test the capacitors.
Previous Video:
How to Test Capacitors with and without Multi-meter.
• How to Test Capacitors...
01:13 [1st method:]
In the first method, I have tested the start capacitor without using any multimeter. If you don't have the multimeter or any small DC source then you can use this method. But you have to take proper safety precautions.
03:22 [2nd method:]
In this method, I have used a 20 volt DC source to charge the capacitor,
and a small DC load to discharge it.
04:37 [3rd method:]
In the 3rd method, I have used a multi-meter that has ohm scale, to test the start capacitor. with the above 3 methods, you can check the charging and discharging of the capacitor.
06:24 [4th method:]
In the last method, I have used a multimeter that has capacitance (Farad) scale to test the capacitor. This is the most accurate method for testing the capacitor.
If this video helped you out please don't forget to Subscribe, give it a Thumbs up and share it with your friends.
Thank you very much for your support!
Find us on Facebook: / techstudycell
Other useful videos -
How Capacitor work in AC and DC circuit?
• How a Capacitor works ...
How to Test MOSFET transistor using Multimeter by some easy
methods
• How to Test MOSFET tra...
How to make Basic relay circuit and How a relay works
• How to use a Relay in ...
Пікірлер: 305
I've got an old motor with a start capacitor, the motor only hums when I try to start it. I cleaned the centrifugal switch contacts and it still only hums on start...... so I wanted to test the capacitor and that's how I wound up here. Now I shall go test the capacitor, I'll be right back with the results........ and I'm back and still alive .... the capacitor on the motor is DEAD, won't hold a charge after numerous attempts. Another capacitor I happened to have did hold a charge and a nice spark on the run and start side. I 'll order the correct capacitor for the old motor and see if that will get it to start properly. Thanks for the youtube. No telling how many motors go to the scrap yard when a new capacitor would fix them. Thanks again.
The first way looks the best fun but please use a quick test block or similar. These are designed to temporarily connect things to the mains. Just makes it a bit safer for you. Thank you so much for posting:)
@mohamedsaad6506
2 жыл бұрын
kzread.info/dash/bejne/i3uHqsWyh83bacY.html
@usherkaliwonge3082
2 жыл бұрын
But I have question,, if that dead dry battery acid use like they way done to use salt with water. So if you put salt with water for that dry dead Battery so you gona using only salt with water or u can put also acid in that battery?
Excellent. We can measure the capacity of 30uF using another capacitor. If we have another 30uF, we put them in series and we have 15uF. If we have one under 20uF, we measure it and we find the value = a, then we put it in series with the larger capacitor and we find the value = b, b
thank you for valuable knowledge
Excellent amazing clear and understanding how to test different method on capacitor..... great video!! definitely will follow your videos.
@TechStudyCell
6 жыл бұрын
Thank you for your feedbacks...
@mohamedsaad6506
2 жыл бұрын
kzread.info/dash/bejne/i3uHqsWyh83bacY.html
Looking all over for this . You solved my problem thanks
Great video, nice you shown 4 different ways. The first way looks to be the most fun.
@TechStudyCell
5 жыл бұрын
Thanks for your feedback 😊
Hi. Thanks so much. You've save me around 4900 rupees
thanks for a good job. that you explain in different ways. I follow your job and look forward to more about other things i have idea but i don't know if it is appropriate to say publicly but if you want let me know
I knew three methods, but now, I know all about capacitors testing. THANK YOU.
Another Great Video... Thank You Very Very MUCH....
@TechStudyCell
6 жыл бұрын
You are welcome...
Excellent video. Thanks a lot for sharing those tips. The first method is somewhat "hair raising"! :)
@TechStudyCell
4 жыл бұрын
Thanks for your feedback 😊
Great help, thank you.
@TechStudyCell
6 жыл бұрын
You are welcome.
@soundarajans1258
6 жыл бұрын
David Coro 77
Aside your simplicity and skills I enjoyed your videos Mostly because other videos out there were in hindi which many will not understand including me of course. Keep up, much appreciated👍👍
Very clear and simple, thank you.
thank you so much
One of the best capacitor testing videos on KZread. Thanks!
@luanyeung2385
3 жыл бұрын
8
Hello my dear friend capacitor i think this copacitor is could running capacitor , starting capacitor is normally open in start motor, running capacitor is not open thrle motor is opperation..thank you for sharing tjid video..👇👇👇🤝🙏🏼
Simple and straight forward practical experiment on how to test a capacitor.. AWESOME...
@TechStudyCell
4 жыл бұрын
Thanks. But if you have multimeter then refer this kzread.info/dash/bejne/g4t3rrKfedXWXZc.html
Great video...
yes i did: thumbs up
@TechStudyCell
6 жыл бұрын
Thanks...
@williamreith1632
5 жыл бұрын
Thanks for the very clear explanation. Thumbs up.
Great informative video sir 👍 👍 👍
can this be connected to a battery for a moise trap, i had few of those from a ripped washing Machine
Thanks for a great video in excellent English and explained so a novice can duplicate it.
It's informative video. . Thanks alot
@TechStudyCell
5 жыл бұрын
you are welcome
Thanks for the video. How do you know if such a capacitor is actually faulty or needs to be replaced? I've got a garage door opener motor which no longer works, and I think the capacitor is dead... When I test with multimeter (3rd method) nothing happens at all on multimeter. Just stays on 0.0?
Thank you very much my friend.
great video!
@TechStudyCell
4 жыл бұрын
Thanks
Great video and very professional and good job 👏🏻
@TechStudyCell
4 жыл бұрын
Thanks
Thank you very much. This was very helpful.
@TechStudyCell
5 жыл бұрын
You are welcome 😊
I have a Crompton water pump of 1 hp, recently I replaced the capacitor with same MFD but my previous capacitor has two terminal or wire in it and the new one which I purchased has 4 terminal, can in install it to the new one?
thanks for info.
@TechStudyCell
5 жыл бұрын
You are welcome 😊
Thanks for the info. Good explanation. Keep it up.
Teachable i really lean something .
@TechStudyCell
4 жыл бұрын
Thanks
Excellent! Thanks!👍
Excellent explanation. Very comprehensive. Thank you!
@TechStudyCell
3 жыл бұрын
You are welcome
Thank you. This trick really useful for my trouble since I only have a multimeter without capacitance meter. My air con capacitor shows still charge and discharge by the multimeter, but how can I know that the function is still good?
It should be realized that when applying a capacitor to AC mains and removing it, there will be a DC voltage present. The size of the voltage will be determined by when the supply was removed in the AC cycle. It could be anywhere between 0 and +/- 340V DC ( as the peak DC voltage is 1.414 times the AC RMS voltage, My method is to connect the capacitor to a IEC lead, plugging it into a power point and switching the power ON and OFF briefly. I then remove the lead from the mains supply & I measure the voltage with the multimeter and look for a voltage >300 Volts. Discharge the capacitor by short circuiting it and repeat the process several times for voltage >300 Volts. Then measure the voltage every 5 minutes or so & if the capacitor is still charged to the same voltage, you have a good capacitor. If not it is leaky to some degree and should be replaced. Discharge the capacitor before removing it from the IEC connector! I don't think we should be showing anyone "poking things into power points directly" If you do this sort of testing a lot, make up a lead with insulated alligator clips (sometimes know as a suicide cord), but do not leave it lying around!
@zubairkhan6937
4 жыл бұрын
I am agreed.
@zubairkhan6937
4 жыл бұрын
What about this if we connect the capacitor in series with 220 volt A.C bulb of 60 or 100 watt?
@unnikrishnanchevidan8243
Жыл бұрын
what is the meaning IEC lead.
Thank you
@TechStudyCell
6 жыл бұрын
welcome...
Thank you for the video. I also have the 4 pin type, it's a cbb60 for a MacAllister COD2000FLS tablesaw. After testing the cap, it seems to be okay, it's holding and releasing charge perfectly. Looks like I need a new saw 🫠 Leaving the brand and model number here for owners who run into the same issue, so let's hope Google search leads them here 👍
good video, thanks for info, well explained, can you please tell me how can I find out, how many uf capacitor is, if the label is not readable thanks
sir very useful this video thanks
@TechStudyCell
5 жыл бұрын
You are welcome.
I have a portable air conditioner that doesn't work. I have removed the start capacitor and tested the resistance and it's on overload no matter what ohm setting I put my multimeter on. I have tried charging it, and discharging it and it's always the same. Is it safe to assume the capacitor is dead?
Please can I change the capacitor of a summersible control box with a higher one with higher microfarad?
Thanks, very helpful, I really appreciate that teaching, but I will really be happy too to get a line to contact you we needed;thanks.
@TechStudyCell
6 жыл бұрын
You are welcome...
@mohamedsaad6506
2 жыл бұрын
kzread.info/dash/bejne/i3uHqsWyh83bacY.html
Helpful video. I did have to use the captions. My brain just isn't wired for that accent. Good video though.
@TechStudyCell
5 жыл бұрын
Thanks...
SAFETY is number 1 I see..
@SunilSaini-in4vr
5 жыл бұрын
UV suspicious toxic cup goncff
Thumbs up for anyone encouraging poking bare wires in a plug socket. Who needs a multimeter. Your balls are BIG
Thank you for that sharing sir.
it is OK
Sir may I ask, if I have a motor starting capacitor for "Dough Mixer" of 80µF 10+20% 270V, and I have a reading of 85µF, shall I say that the capacitor is in excellent condition?
nice
first all thank you for the helpful video.Did helped me. second tank you for speaking english and not like other indian making great video but speaking hindi .how the hell would the rest of the world understand ? so thank you sir
@TechStudyCell
4 жыл бұрын
It's my pleasure
@jackrichards1863
Жыл бұрын
@@TechStudyCell I am certain that fellow meant 'Second, thank you...' rather than 'Srcond tank......' good instruction. Quickly told us what to do and all about it. Great work, no confusion!
Bravo
@luigicaneri122
6 жыл бұрын
Northstar 27 come installare power director
Please note that, while doing this, I suggest that capacitor not to be connected directly even little time, since we want check capacitor is Ok or nor, there may be open or short internal, it should be always to be connected one series lamp with this, so the test will be safe, if not incase short, it will explode with no time.
Thank you, very informative!
@TechStudyCell
3 жыл бұрын
Glad it was helpful!
Yup. Fixed washer dryer , thank you Sir Thinking Mans tv 👍👍🙏
Yours is the fourth video I've watched on the subject and by far the most helpful! Thank you.
@TechStudyCell
6 жыл бұрын
Thanks for the feedback...
@desalegnderesa8352
4 жыл бұрын
Thanks
very nice .......
@TechStudyCell
6 жыл бұрын
Thanks...
I think its better you use a resistance in series while connecting in mains and discharging
Sir how to choose the capacitor in single phase motor and three phase motor in 2 phase condition adding of phase shifting
Hi great video,i have installed the new cspacitor to my compressor, it worked for 2 days but now when i start it ,the motor doesn't run just mskes a noise as its struggling to start or its stuck ,any ideas fellow ?
could you please explain third method (or please refer to link explaining etc...)? how capacitor is charging without a source ?
@KesienaBrown
5 жыл бұрын
The multimeter has a souce. Recall to measure resistance, you need v=IR, so the resistance of the capacitor increases with increase in charging and vice versa.
Sir minilec wlc d1 connection to the submersible starter diagram
4:55 is it 200k ohms or 2000k ohms pls i would appreciate it i need to test a 45uf capacitor..tks
Buy a new one.. you can test the old won using the continuity on your VOM to charge and test. Apply leads then reverse you should see a voltage kick if still good...
You can charge capacitor by use a diode for high voltage. In this way you can charge at max voltage all the capacity.
@TechStudyCell
7 жыл бұрын
yes. but I have tried to show the testing of a start capacitor without any component and tools.
@mikr1334
7 жыл бұрын
Yes, I understand this, but you don't will have never the total capacity and so if the capacitor is very good or less.
@jayryan7473
4 жыл бұрын
@@mikr1334 You really don't understand.
I don't hate you u r a great man
Nice video.. I need help :( I have a power washer, it was humming on start and not running, I had a larger capacitor in garage and changed it over, motor ran for a minute and blew up capacitor, it was rated over double uf.. Is it a start or run capacitor? There is only one so I assumed it was a start,.. I will send link to power washer pdf parts :) thanks if you can help
@TechStudyCell
7 жыл бұрын
If no centrifugal switch connected in series with the capacitor then the capacitor remains connected during running period. Please always replace the capacitor having the same rating (uf must be same, voltage and temp can be higher or same) for both start and run capacitors.
@saifulislamtipu3144
6 жыл бұрын
nice
5:53 increasing not decreasing !
Great vid like it 👍.
@TechStudyCell
4 жыл бұрын
Thanks
nyc
Why you charge the capacitor for a fraction of a second only. Is there a problem if we keep in charging for hours?
What is the voltage of the buzzer..?? Since the capacitor is of high voltage.
How about polarity capacitor if there is negative and pacitive like 50 Volt ,100 uf
@TechStudyCell
3 жыл бұрын
Please refer the following video for accurate testing. kzread.info/dash/bejne/g4t3rrKfedXWXZc.html
Ok felicitari
5%+/- deviated does it means i can no longer use them if it is higher by 5% micro farad from the stated?
@bixenbaer
3 жыл бұрын
Of course you can use it. It s just the error margin as specified by the producer.
Which place I want purchase this type of multimeter... please help me?
DANGER Will Robinson! DANGER!
22w cooler motor ko konsa capacitor laghye
@zubairkhan6937
4 жыл бұрын
2.2 uf
Good video
@TechStudyCell
6 жыл бұрын
Thanks
Short the capacitor through series bulb. Discharge also through series bulb.
Thanks.😷🇬🇧
thank you for that sharing sir.
Just viewed your video, thanks I appreciate it.😎
Excellent
@TechStudyCell
Жыл бұрын
Thanks
You are brave to test like that. And much more experienced with electricity than I am. I'll call an AC tech instead; but thanks for letting me know how risky this can be.
Good video, thanks! One question: when you measure, and connect back capacitor, can wires be in either location: there is no "plus and minus" connector, either way capacitor works !!!??? Thanks, youtheman =)
@TechStudyCell
3 жыл бұрын
This is a AC capacitor, so there is no positive and negative terminal
@Eeropolvasti
3 жыл бұрын
@@TechStudyCell So, you can check it, or connect it either way, right??
@mohamedsaad6506
2 жыл бұрын
kzread.info/dash/bejne/i3uHqsWyh83bacY.html
@brslst5645
2 жыл бұрын
@@Eeropolvasti yes, correct. There is no +/- on the capacitor
Hi again this is the link.. It is a pdf and thank you anyone who can help
@luckyhomeappliances1690
5 жыл бұрын
. VAc
Thanx
Why it should be connected for fraction of a second ?
good brother
an excellent video
How to connect 4terminal capacitor to 2 terminal capacitor
Sir capacitor ka formola batiyan kitnay kw ya hp ka liya kitna uf capacitor chahiya
@zubairkhan6937
4 жыл бұрын
Yahan KZread py koi b nhi bta paye ga brother.
What will happen if I plug it much longer than a fraction of sec?
@TechStudyCell
5 жыл бұрын
The method itself riskly. As the capacitance is high so high current will flow through it which can damage it. So connect it for a fraction of second to charge the capacitor.
Yeah, never use a load like a light globe, just short it and damage it further......... I wonder how many videos didn't get made because the person was injured or killed.
@user-oh1xg4my6g
4 жыл бұрын
markcircusim
Thank you.
for a 3 wires ac motor (common wire, start and run winding) which wire should be plugged to capacitor? is it right to plug the common from the motor to neutral, live to capacitor which the other wires are plugged to the two terminal of the capacitor? or live to common and neutral to capacitor?
गुड