Thanks, I was an electronic technician for about 20+ years before moving into software. You bring back good memories. And your methods are the same as was we did.

Explained extremely well. Thank you.

@TechStudyCell

5 жыл бұрын

Thanks

Awesome, thank you so much. Very easy to understand and quite informative. I realize you made the video a few years ago but, best i have seen. Wanted to give you props man.

@TechStudyCell

4 жыл бұрын

Thanks for the feedback 😊

Excellent video, however i disagree with 2 things. 1. 20% deviation really should be replaced. It is on its way towards failing. 10% deviation is the normal acceptance. 2. Do not ever use your fingers to cross the leads in order to discharge capacitors. Other than those to things. This is a good video and helps people out. Keep up the good work.!

Great video. I never thought about charging a cap with a 9-volt battery for testing. Great information.

@TechStudyCell

5 жыл бұрын

Thanks for the feedback

@zelekeayalewbaychekn4260

4 жыл бұрын

Tech StudyCell how can I get this technical video to know details about all semi conductors materials operations,testing and pc boards. zelekeayalew 888@gmail.com

@rajurakesh5568

4 жыл бұрын

@@zelekeayalewbaychekn4260 bag

Very well done, explicit and understandable. Looking forward to more of your instruction.

@TechStudyCell

5 жыл бұрын

Thanks for your feedback 😊

Very good explanation and vey easy to understand it. Thanks for sharing it I also subscribed your channel and looking forward for your next uploaded videos in the near future.

@TechStudyCell

5 жыл бұрын

Thanks for your support.

@hendersonsequera1138

4 жыл бұрын

Excellent video content! Apologies for butting in, I would love your opinion. Have you researched - Runayslarn Survival Manifestation (google it)? It is a smashing exclusive product for discovering how to repair your electronic items without the hard work. Ive heard some extraordinary things about it and my mate finally got astronomical results with it.

An excellent video explaining the basics. Thanks a lot.

@TechStudyCell

7 жыл бұрын

You are welcome... keep sharing your feedback with us.

@sil698

6 жыл бұрын

SANJIB ROY CHOWDHURY painéis

Very nicely explained. You have taught very simply, but, clearly. I must say that such a magnificent initiatives wll no doubt, be very much helpful to the beginners. Please keep it up and make more videos of similar nature. I wish a lot of success in the coming years. Thank u.

@TechStudyCell

3 жыл бұрын

Thanks for your feedback...

Very good explanation. It is very helpful to beginners. Nicely explained. Thank you so much. I enjoyed it.

@TechStudyCell

5 жыл бұрын

Thanks for the feedback...

Thank you for being so kind in sharing your wisdom

Thank you very much. Went through a lot of videos before finding the best explanation 👏

thank you, you did not over explained the process like some other people do. my thanks

@TechStudyCell

4 жыл бұрын

Welcome.. & thanks for the feedback...

Thanks for such a wonderful explanation.

@TechStudyCell

5 жыл бұрын

You are welcome.

Thank you so much Sir .....great vedoo appreciated

@TechStudyCell

5 жыл бұрын

thanks for the feedback.

@pcbdesignhub1847

4 жыл бұрын

kzread.info/dash/bejne/rGyHuLqBqKbLh5c.html Learn PCB design

thank you for this video. got some important basics on this.

@TechStudyCell

7 жыл бұрын

Please keep sharing your feedback with us. Thank you.

@milanjevtic1424

4 жыл бұрын

@@TechStudyCell O3854 and them out the 9oy

Swell video. Groovy job!

A very good ,super video lesson , thanks a lot pal

thanks bro it was really useful video

thanks a lot, for this video

Thank you! This video was very helpful for me

@TechStudyCell

7 жыл бұрын

You are welcome...

hi, thank you for this video... please how can we read a propylène capacitor like the following : CL 21 155j 250v ( Cl 21 refers to manufacturer, 250v is maximum voltage supported, but 155j ?

@TechStudyCell

5 жыл бұрын

15 5 J ---> 15 [first two digit] | 5[ no to zero after first two digit] | J [Tolerance +-5%] |unit in pF 15 * 10^5 pF ----> 1500000pF -----> 1.5µF

Thank you for this video. I do have a question. Why did the meter stay in AC mode when you were checking the DC capacitance?

It has a lot of sense, thanks so much for the video

@TechStudyCell

4 жыл бұрын

Thanks for the feedback.

YOU ARE VERY GOOD TEACHER

I benefit a lot from the short videos.it is really educative

Thank you so much it is the best explanation which we understood sir once again thank u so much .😍😘

@TechStudyCell

7 жыл бұрын

+pratish redkar Please keep sharing your feedback with us on other videos. Thank you.

thanks for youtube videos i m learning a lot

@TechStudyCell

7 жыл бұрын

+dorji wangdi Please keep sharing the video if you like it.

thank you so much for this video

@TechStudyCell

7 жыл бұрын

+Md. Satter welcome.

Thanks for this video. I did learn something new.

@TechStudyCell

7 жыл бұрын

You're welcome.

Thanks very much for the educative video .it helps me understand different types of capacitors and how it works.

@TechStudyCell

4 жыл бұрын

Thanks for your feedback 😊

@simeonlamin6312

4 жыл бұрын

@@TechStudyCell Thanks and welcome Teach me more

very Nice video .please TSC. how to choose a good multimetr ? thank reply

Hi I have an AC box capacitor inline with the start/run capacitor, what is its purpose please? (im trying to fix my washing machine? Many thanks.

Hi can you tell me the brand and modal of your meter. Also can you test in circuit similar to ESR LSR meter. thank you.

Very much informative, well explain, great job, please continue.thank you.

@TechStudyCell

5 жыл бұрын

You are welcome.. thanks for the feedback.

thx for your efforts , very thorough explanation

@TechStudyCell

4 жыл бұрын

You're welcome 😊

I have no lc meter in my multimeter. How should I check ac capacitors(ceramic,polypropil) are in a good or bad conditions?

Great video. How do you tell which side is shielded ?

such a great lesson,thank you very much.

@TechStudyCell

7 жыл бұрын

+gh5643 Welcome.

Really very informative and understandable.

@TechStudyCell

4 жыл бұрын

Thanks for the feedback 😊

Hi, my friend. My capacitor has this written on it: 474J 630V S733 MPP - I measured 530nF with a multimeter. Is that ok or do I need to replace it? I don't understand the letters on the capacitor. Thanks

awesome you always go into detail to fully understand the subject. thanks

@TechStudyCell

7 жыл бұрын

+mike r. Keep sharing your feedback. Thank you.

Using this for my classes, very appropriate

Well taught lessons with wonderful demonstration

Thank you for video.

thanks for this vedio & it is very helpful

@TechStudyCell

7 жыл бұрын

Thank you...

Highly thanks sir ,,,,,,,,very helpful video

@TechStudyCell

6 жыл бұрын

Thank you...

Great content !!! Thank you

@TechStudyCell

5 жыл бұрын

Welcome 😊

Very good Information. Trank you from Germany 👍

@TechStudyCell

7 жыл бұрын

+ralf klinkkier you r welcome

Excellent Video Boss. Thanks for Sharing.

@TechStudyCell

7 жыл бұрын

+afrooz mohammed thanks for your feedback.

Good Video. Well explained.

@TechStudyCell

7 жыл бұрын

+Al Edwards Thank you...

Nice information!

Excellent ....Very Helpfull..

@TechStudyCell

6 жыл бұрын

+Yogesh Dolas Thank you for your feedback.

Simple and very good explanation.thanks

How about capasitor box (2-9 mf)for test ? Which one the choice indikator in u're multitester ?! is that same with 100nano farad test ?

Hello can you please tell me if i try to replace big electrolytic capacitors from chassis (hantarex) from the power of the board and to other places of the board before i disolder them i must discharge them? If yes how? with the same way of the screwdriver even if they are soldered?

From colombia,thank you

Well done with this video mate. Top marks.

@TechStudyCell

3 жыл бұрын

Thanks 👍

Thanks for all your help

@TechStudyCell

6 жыл бұрын

You are welcome...

Thank you for let us know detail

@TechStudyCell

4 жыл бұрын

You are welcome

thanks sir for taking your time to explain everything

@TechStudyCell

3 жыл бұрын

You are Welcome

If M7 diode is giving buzzer sound on the pcb on both polarities, do you think the diode is bad? Pls advise.

thanks for this video, great ......

@TechStudyCell

7 жыл бұрын

+dhiman roy welcome

do i need a photo flash to make an emp?

Good video. Thank you!

@TechStudyCell

6 жыл бұрын

you are welcome...

Very very instructive. Thanks.

@TechStudyCell

5 жыл бұрын

Thanks for your feedback...

Excellent simply and clearly explained.

@TechStudyCell

5 жыл бұрын

Thanks for your feedback 😊

does the visual method work only for electrolytic capacitors?I don't see how I could check for this with ceramic capacitors for example.

@TechStudyCell

7 жыл бұрын

+Joshua Benarroch, it will work when the capacitance value is high. Even for the electrolytic capacitor having low capacitance value, cannot be tested with this method.

Nice 👍

what will be measure the capacitor before discharge ?

मुझे बहुत अच्छी लगी ये वीडियो बहुत कुछ सीखने को मिला।

@samadhanbalu3432

7 жыл бұрын

ok

very very useful sir

@aliyum.bagudu8275

5 жыл бұрын

It is helpul

Thanks for the video and the knowledge. Thanks for speaking English so I could understand

Is there any DC box capacitor??

Good job. Very useful video !

@TechStudyCell

6 жыл бұрын

Thanks

Nice sir you are great job

useful bro.

Very useful video 👍

thank you

best video that I see ever because I am searching about that only♠♥

@TechStudyCell

7 жыл бұрын

Thank you for your feedback.

Thank you sir for the best information

@TechStudyCell

5 жыл бұрын

You are welcome 😊

Good explanation, 👍clear voice and slow explanation. And also a good quality image of the video. Please can you help me by sending the model code of your multimeter. Thanks have a good day.

Hello I have a Polypropylene AC capacitor where written 2C 105K 230S316 can I use 105J 250V Polypropylene capacitor in place of that capacitor.

very nice ur way of explaining is very nice bro

@TechStudyCell

7 жыл бұрын

+PAWAN SHIVHARE Thank you..

thanks show how to check leaking or spoilt capacitor on motherboard without removing from board

good information video

very good video, thumb's up (Y)

For capacitor how much capacitance is required to manage 50 volts? Plss sir

thank a lor!!

Thanks for the sharing your knowledge...

@TechStudyCell

Жыл бұрын

Welcome

What is the working & use of polypropy on curcitbord.....

Most very excellent !! Thank you very much Sir !!!

@TechStudyCell

3 жыл бұрын

Welcome

What is the different between box capacitor and poly.capacitor?

thaks bro

brilliant video.....what can be the reason when capacitor blows up in circuit

@TechStudyCell

4 жыл бұрын

Mostly wrong polarity, voltage rating not followed etc

@TheVicar

4 жыл бұрын

I've seen both electrolytic and box capacitors explode when they are old and have "dried" out. Quite a loud explosion!

Hello brother Tech study very good thank you

@TechStudyCell

3 жыл бұрын

You are welcome

This is a very good video Thank you for sharing!

@TechStudyCell

6 жыл бұрын

You r welcome..

thanks

Thanks so it's helpful

@TechStudyCell

6 жыл бұрын

you are welcome.

Thanks for sharing the knowledge!

@TechStudyCell

2 жыл бұрын

Welcome