No video

How to test a headlight bulb (H4)

In this video i show you how to test a headlight bulb using a power probe. Enjoy!
Contact Email: thesavagegarage2016@gmail.com
Music - Krys Talk - Fly Away [NCS Release]
• Krys Talk - Fly Away |...
Krys Talk
➞ SoundCloud / krystalkmusic
➞ Facebook / krys-t. .
➞ Twitter #!...

Пікірлер: 24

  • @alexuswilliams5426
    @alexuswilliams54267 жыл бұрын

    i was hoping you would show both the low and high beam testing, since you are using an H4 type bulb.

  • @stringbender11672

    @stringbender11672

    3 жыл бұрын

    agreed

  • @CHILLGAMINGBEATZ

    @CHILLGAMINGBEATZ

    7 ай бұрын

    @@stringbender11672 i needed him to to prove a point to someone who told me there is 2 grounds and 1 positives i just looked at him like uh okay no thats not how power works

  • @jovo21

    @jovo21

    3 ай бұрын

    Maybe you just gotta tap the other prong and it'll be low beam?

  • @carbikesale2134
    @carbikesale21342 жыл бұрын

    What's the Name of the tool with which you tested the bulbs?

  • @joolstacho8114
    @joolstacho81143 жыл бұрын

    Seems crazy that you only tested one pos terminal. What's the story with that?

  • @BilluAwann
    @BilluAwann3 жыл бұрын

    Can you make a video or how to yeast a actual led headlight out of a car before anyone purchase them to test it before buying ?

  • @paquesepas6696
    @paquesepas66964 жыл бұрын

    On these bulbs which is the same ones for my scion xb 2006, are the three terminals on it 1 ground and 2 positives or are they 2 grounds and 1 positive? Because both my headlights are not turning on and only the low beams wires on both connectors is not reading anything but I want to know if I'm supposed to be looking for ground or positive on the low beam wire? The other 2 wires I do get 12v but not on the low beam wire. High beams turn on by the way no problem.

  • @Theofortnitemad
    @Theofortnitemad8 жыл бұрын

    You should of shown the high beam one

  • @SoapyHB

    @SoapyHB

    5 жыл бұрын

    Yes that was specifically what I wanted to know. I suppose the next step is to just test the other prong...

  • @Thumper68
    @Thumper68 Жыл бұрын

    Well you know low or high beam works

  • @zedman442
    @zedman4428 жыл бұрын

    You have to be really careful with these probes, can fry electrics if used incorrectly. Good basic tutorial however.

  • @SpacedOdyssey
    @SpacedOdyssey2 жыл бұрын

    seems a bit pointless not test the other filament,

  • @juanjohnism
    @juanjohnism8 жыл бұрын

    Isn't there a high and low beam?

  • @TheSavageGarage

    @TheSavageGarage

    8 жыл бұрын

    On some bulbs yes, my car has separate bulbs for high and low (h7) the bulbs with both high and low in the same bulb are h4

  • @ykchannel2391
    @ykchannel23914 жыл бұрын

    Is that the phillips blue vision bulb?

  • @impreza9726
    @impreza97266 жыл бұрын

    Using a multimeter seems easier

  • @spyder8986

    @spyder8986

    3 ай бұрын

    Some people don't no were to put the setting or what to look for, on the multimeter,but I agree.

  • @juanjohnism
    @juanjohnism8 жыл бұрын

    Thank you for the timely reply.

  • @abdulhannanmiah9797
    @abdulhannanmiah97974 жыл бұрын

    Nyc

  • @arifhussain6315
    @arifhussain63152 ай бұрын

    you can test without that power probe

  • @carlparsons8921
    @carlparsons89218 жыл бұрын

    What test equipment are you using.

  • @TheSavageGarage

    @TheSavageGarage

    8 жыл бұрын

    It's called a power probe

  • @jamkop5298
    @jamkop52985 жыл бұрын

    Too much eyebrow tweezed.