How to TAP the Best small screw holes ever. Easy DiY tapping with simple hand machine.

Тәжірибелік нұсқаулар және стиль

Using a manual tap machine to get perfect tapped holes every time with out breaking the tap off.
Be sure to check out my new website at - gwheyduke.com/
Here is the book in the video - amzn.to/3rLxzHI
Link to the tapping machine in the video - amzn.to/2WdT2ee
Link to a small Palmgren Vice - amzn.to/3a682Dh
Majic Tap cutting fluid, small can - amzn.to/2WcuIcQ
DISCLAIMER:
This video is intended solely for entertainment purposes. Any replication of experiments, projects, and creations, or anything similar, is the exclusive legal responsibility of the individuals replicating them. gwheyduke cannot be held liable for any information or misinformation, improper use, damage to personal property, death, or any other consequences that may arise from replicating any content viewed.

Пікірлер: 8

  • @gwheyduke
    @gwheyduke3 жыл бұрын

    Ugh ! I sound like an infomercial but I really do use this thing a lot, so much easier than tapping by hand.

  • @taylored.creations
    @taylored.creations2 жыл бұрын

    @gwheyduke I got a 2nd edition printing of the book you suggested on this video. Thanks for the info on it! A LOT of useful information in it. Thanks again!! ~ Otis

  • @gwheyduke

    @gwheyduke

    2 жыл бұрын

    Yes I still refer to this book all the time. Glad you got some good use from the video.

  • @taylored.creations
    @taylored.creations2 жыл бұрын

    I recently acquired a Lassy hand tapper but unfortunately I only have one collet for it. Any suggestions on where to get more collets for it? Please let me know. Thanks! ~ Otis

  • @gwheyduke

    @gwheyduke

    2 жыл бұрын

    You might try Harbor Freight to see if they have a replacement set for this tap machine. If that fails you can make them pretty easily on the lathe. I made one a tap holder collet for mine to hold very small tap sizes using 12L14 steel. 3 or 4 collets will serve most of the standard tap sizes.

  • @jimbos3421
    @jimbos34213 жыл бұрын

    OK cub 0.074? We would like to see that run!

  • @gwheyduke

    @gwheyduke

    3 жыл бұрын

    Here's a link to more information, it shows the .074 adriansmodelaeroengines.com/catalog/main.php?cat_id=225

  • @gwheyduke

    @gwheyduke

    3 жыл бұрын

    If you woul like to subscribe, I have more information on vintage engines on my website - gwheyduke.com

Келесі