Greetings from an Alberta guy now living in Australia! This showed me exactly what I need to do! Thanks.

Great timing on this video. I drove 4 hours last night to get to my farm to remove 1.5 miles of 70 year old fence. Keeping it simple.

Thank you for sharing such an easy method -- until I saw this I thought I would need machinery. This method saved me time, money and hassle. I rolled up 1-mile of 5 strand wire by myself that took about 7 days and about 12-15 rolls ~ 3-4 ft diameter. My only variation was the 5-strands were dropped on the ground before winding. I had to drop the fence to remove wire standoffs set every 12-ft or so, which took the most time. The bent, deformed wire standoffs were unwound by hand which took me 2-5 minutes each. Once the standoffs were removed, I bunced the 5 strands every 20-ft or so it would wind easier. I bunched the wires by grabbing a convenient wire and wrapping it aound the others a few times. Once the wires were bunched, I could then quickly roll a 300-500 ft spool, cut it, and repeat. I found the smaller 300-ft spools were easier to manage, cut, and quickly do the next. If the spools exceeded 300-ft, then it slows you down trying to manage a larger, heavier spool with individual loops separating, etc., which I managed by using a loose wire and wrapping it around the loops. But that slows you down as it becomes more cumbersome and heavy to move. I found ~ 200-300 ft about optimum lenght for me. Also, I went through a two pairs of leather gloves, jeans and long-sleeve shirts -- that damned barbed wire grabs and shreds everything. Barbed wire is so hard on the wildlife, livestock, and eagles I''ve seen killed by it. I'm taking it all down and replacing with wood rail fencing to spare all animals. It''s more expensive, but I hate seeing dead animals. Wood rails looks better too.

That is a slick trick with the chain to pull posts! Thanks for sharing.

Thanks Luke. Car took out part of my perimeter fence--about 150', so this is timely.

Glad to see you are still up and Rolling.

Thanks for the info. I hope you’re family is doing well , we all need to stay in Gods will together brother

Thanks so much for showing an easy way to roll it up. I have 3 strands of good barb wire about 1/4 mi. that I want to reuse. I'll do your method 1 strand at a time. New neighbor wants to do smooth wire between our cows which is fine with me. Greetings from Battle Creek, Mi.

Thanks for sharing Luke these will help me go way faster than I thought was possible

Great video

Thank you. We have a bunch we have to get down on the top of the mountain.

As always great information, thanks!

👍👍 Thanks for showing this

I just learned me something. Thanks Brother Luke

I like it. Excellent work.

Great Job , Thanks !!!!

Thanks Luke much easier without brush!! God Bless!!

Thank you. I will use this method in the future. We had been removing it 1 strand at a time.

Thanks for the great info! :-)

Man, nice technique.

I've seen a couple old timers make up a wheel to wind up on and attach to belt pulley on the old tractors . There only missing an eye or a finger or two. But the wire was done fast. Lol

did that once when i was a kid on a ranch out of Circle Montana.

@BacktotheBasics101

Жыл бұрын

Circle Montana is beautiful country

Hi Luke, thanks for sharing your fencing experience. Where can I get a set of fence pliers with that hammer head on them. Never seen a pair like that. In one of your videos on setting wood corner posts you are using some post hole diggers I have never seen before either. Where can I get one of those? Thanks!

Great tutorial Mr. Luke. I wish I had known this a couple of years ago. I rolled my wire one strand at a time. Would you recommend this method if you want to reuse the wire? God bless you and your family.

@BacktotheBasics101

Жыл бұрын

Absolutely not it is not reusable when you roll it this way if you are going to reuse it, it is one stranded a time in the same method. I should’ve went over that in the video. Thank you for pointing it out.

@wesleemiller

Жыл бұрын

👍

About to removing fence in my woods hasnt been touched in 30 years 😢

Could you re-use the barbed wire if it was new conditions and the fence just needed moved

Hey Luke, I enjoy your videos! Keep up the great work 👍 I'd like to chat with you sometime about your pcc bulls. Phone # would be great. Thanks Brooke

The heavens declare the glory of God Once you have seen you cannot unsee Welcome friends to revelation 2 2023...

Why didn't Cooper toss the tposts into the bucket?

I built a little puller for the skidster bucket that bolts on you just poke around the post and it lifts the t post up without having to use a chain because I work by myself

@BacktotheBasics101

Жыл бұрын

I would really like to see that. What a great idea.

@haroldwilkerson2026

Жыл бұрын

@@BacktotheBasics101 Send me something I can send a picture to and I can get a picture of it

@BacktotheBasics101

Жыл бұрын

@@haroldwilkerson2026 701-260-3914 Please let me know when you get the number then I’ll erase it . Thank you

@haroldwilkerson2026

Жыл бұрын

@@BacktotheBasics101 got it

@landonpackard8935

Жыл бұрын

So would I.