I’d recommend not to throw the buckle to avoid accidental damage to your vehicle. Keep the buckle idle and throw the opposite side of the strap.

@zackfiddis5389

2 жыл бұрын

For sure! This was my wifes car (dont tell her)... But the rubberized buckle protectors on the NRS Straps are very gentle ;)

@dontall71

Жыл бұрын

He just got through describing the protective backing material, then proceeds to throw the buckle, banging into the car window on the other side, not cool

@bethwright8595

11 ай бұрын

I generally agree with throwing the non-buckle end of the strap over your vehicle, but sometimes it's too windy to do that. I've had times when I've tried to throw it three or four times before I actually got the strap over the vessel somewhere near where it needed to be! I've tried to walk it around but I'm not really tall enough for that and it's far more trouble than what I'm about to describe. I've figured out how to safely throw the buckle end of a strap over your vehicle and vessel, and it's not very complicated. Simply figure out how much of the strap you need to reach the other side where you want the buckle to be, and throw the buckle holding the strap such that no more of it can be released than what's needed to get it to the other side. You can easily do this calculation sometime when you're removing the straps to take your vessel off your vehicle. I've never done this but you could mark the spot with a sharpie so you remember where to hold the strap. I measured it initially by stretching the strap out against my out my arm, and I can do that each time I need to. My vessel's actually a kayak and the two places where it sits on the bars of my roof rack differ in width, so I had to figure this out twice but it's not like it's rocket science! I just wanted to warn people that this may be the case with some canoes, too, although I wouldn't expect the difference to be as dramatic. Happy paddling! 🛶

I'm glad to see that you showed the most important step .....( flicks strap ) ...... "That's not going anywhere." 🤣😂🤣

@FrontenacOutfitters

3 жыл бұрын

Safety first! 😆

With any secured load, I like to go 20 or 30 minutes down the road and check the load a second time. Motion and bumps often cause things to shift.

@pappy451

Жыл бұрын

i do that with any load i am hauling too . good habit . i have only lost something off my load one time and it wasn't me that tied it in , it was a friend and i didn't check after him . that never happened again .

I use ratchet straps, but I have an aluminum canoe. I think it's mostly about placement and finesse when it comes to ratchet straps. Don't crank it down, don't rest the ratchet on the side of the canoe, or put down a cloth or foam under the ratchet and tie it onto the ratchet after you've tightened it down. If you have ratchet straps, I don't recommend buying a secondary product just to carry a canoe or kayak. If you have rope, you can use rope, if you know how to tie a knot with the rope you have. Keep in mind, a canoe only weighs around 70lbs, depending on the material, but you have to remember that the canoe will be catching the wind and the force put on the line could exceed 200lbs at highway speeds. I always recommend using two straps, as shown here, and always tying a line onto the bow and the stern as an extra precaution. As said in the video, you are responsible for securing your load. If it comes loose and damages another vehicle or injures someone, you will be liable for that, even if the straps you used were rated for your load and you took necessary precautions. Test your straps, and inspect them for fraying or damage every time you go to use them. Never use frayed or damaged straps or rope.

If you use a flat strap, and there is a space between it and the keel, it will start to act as a reed and vibrate at highway speeds. The tighter it is, the higher the pitch. That was last year. This year I'm using 6mm climber's cord for all four attachment points. Good video, Zack.

@MrF4tty

Жыл бұрын

If you twist the flat strap it will stop the flapping as well.

Very informative and to the point! Thank you!!

Hey man, a big thank you for this vid. Really well explained and totally helped me transport my new canoe.

Very helpful. Thank you for posting this. I, too, struggled with finding an attachment points for the bow and stern tie-offs. Had no idea about the "quickie hood loop." A "game changer."

@zackfiddis5389

2 жыл бұрын

Thanks for watching

Thanks. This was very helpful.

very succinct and helpful. thank you.

Cool nice and easy. Thanks 🇨🇦👍

Thanks this really helped me today!

Thank you. One tip on the trucker's hitch, after taking the tension, wind one knot over, one under, cinch them together. They will never loosen up. Very nice video, thanks again.

Great video - just found your channel and subscribed. I like your approach. Thanks.

Excellent video, thanks

@FrontenacOutfitters

Жыл бұрын

Glad you liked it!

Well done. Thanks Buddy

@FrontenacOutfitters

2 жыл бұрын

No problem, and thanks!

Thanks just picked up a set for my yak. Switched from using ratchet straps.

Thanks , great video.

@zackfiddis5389

2 жыл бұрын

Thanks for watching!

My rav4 has no connections in the rear and front so this was an awesome loop to see for the hood and trunk!

@FrontenacOutfitters

Жыл бұрын

Happy we could help!

Thats a real nice canoe

@FrontenacOutfitters

5 ай бұрын

It is for sure, H2O Canoes certainly makes some really nice canoes; some of which, like this Horizon 17', are quite lightweight, and fast! Feel free to reach out to us if you have any questions.

I started tying the front and rear carry handles to the crossbars. It's super fast and also clear view of the road and no vibrations. I just use the cams on all 4 straps. Two on the top and two on the handles.

@hectorescobar9200

Жыл бұрын

That is exactly why I am looking for videos to answer that question. That's the question I have, can you just tie your bow and stern to the cross bars? My worry is that the hood tie downs would scratch up your paint.The only think I can think of is if your roof rack fails and that is where you have all your connection points.

@drewed1781

Жыл бұрын

@@hectorescobar9200 I also came to this video to answer this question.

@MarcTelesha

Жыл бұрын

@@hectorescobar9200 I have done it for years and I have traveled hundreds of miles tied this way. I have two straps on the top and then two on the cross bars.

@mwagner1996

Жыл бұрын

I was thinking about doing the same thing! Glad to hear someone else has done it with success. Seems like it would be easier, work just as well, and not impact visibility. I've heard some concerned that there could be enough lift force at high speeds to have the roof rack come off, but I don't feel like that's likely with an 80lb canoe. Even at highway speeds.

@thomasbooth9079

11 ай бұрын

Carry handles can break, mine have.

Muy bueno..lo voy a hacer..gracias por compartirlo

@zackfiddis5389

2 жыл бұрын

Gracias por ver

cant wait to take my Esquif Adirondack out using this method.

👍. Thanks

Great video! Just wondering if the Dodge Caravan (2014) roof rack is structurally sound for mounting a canoe ???

Strapping my Bluewater canoe onto my '87 LandCruiser was such a breeze. You might think a brand new Highlander SPORT utility vehicle would have eyeholes for hooking straps to the bow and stern of your canoe! Nope. Baffling really. Anyway thanks for the easy solution - just placed my order.

Good job with how to tie down the canoe. I wish you had shown how to get the canoe onto the roof rack if you're solo. Wouldn't want to damage the vehicle.

The rear tie down is wrong. The attachment points on the canoe should never be out from the anchor point on the vehicle. Visualize the canoe being stretched by the end tie downs. The canoe in the video example would be bowed up by the tiedowns. Rope at the rear could have been tied onto the seat thwart for a good tie in point.

@puma3620

2 жыл бұрын

Good point, you'd want the front and back ropes to slope in opposite directions, so that they are pulling in opposite directions. With the way it's set up in the video, both lines are sloping parallel, and both preventing the canoe from sliding backward. If you slam on the brakes and the top straps fail, the canoe will travel a good distance forward before the ropes are activated.

@drboone357

Жыл бұрын

Correct

Great job just curious why you didn't also use the straps for the front and rear? Thank you

@moer9036

Жыл бұрын

What kind straps for front and rear ? The rope is to complex

What if the canoe doesn’t have carry handles on front and rear - how would do you attach the front and back?

Hi! How do you tie it down to the back? Did you add something to your Prius?

Finish off your strap by wrapping around rail and tie end with a clove hitch knot.

I’ve always used gunnel blocks. Have you found them unnecessary?

Can I ask the length of the straps you used? 12ft or 20ft? Thank you!

Do I’ve to run these anchor lines on the trunk and hood always? Does just the ties on the roof rack enough?

What kind of roof rack setup you recommend for 2017 RAV4 for canoe?

What are the loops called and where do i get? I lost my husband 2 years ago and a friend is giving me a canoe so me and my best friend can take my 6 and 8 year old to Florida springs. I have a 2019 dodge caravan. I going to be rehabbing the canoe. Is there anything you suggest to add to canoe?

A little worried about doing this since I have a heavier canoe. It weight is around 100lbs. Would this method still be good?

Slit one side of two pool noodle and place on both gunwales and secure with quality 1” racket straps . ( not garbage freight straps )

Nylon stretches though 🇵🇬

Man, if somebody was throwing those buckles around in my vehicle like that, I’d probably give em a beating.

yeah, but put bungees, (what I think you septics call 'shock cord') between each set of straps - stops the wind vibration and noisy/damaging resonance.

@MrBluoct

Жыл бұрын

Between🤔

@gurglejug627

Жыл бұрын

@@MrBluoct yes mate - strap on your normal load holding straps and then hook an elastic bungee between them so it damps them and stops them from going into resonance and vibrating (noisy and damaging) when driving.

I always go through the car and tightener inside car

How does the hood loop not abrade the vehicle paint? I had a truck with the type that attached to a bolt under the hood, and I definitely had abrasions on the paint where those rubbed. OK if your car is naff, definitely not ok on a newish vehicle.

@mbrent_s742

Жыл бұрын

Using the hood loop ruined the paint on my RAV4. The loop vibrates on the highway.

@prospector7409

Жыл бұрын

I slip a short piece of bicycle inner tube over the strap at the point where the strap contacts the paint. Never get a scratch.

“Dont use ratchet straps to avoid damage to canoe” “throws buckle onto canoe”

@zackfiddis5389

2 жыл бұрын

Busted haha... The NRS Buckle protector is seriously gentle. And what's another scratch on the canoe anyway? I would def not be throwing ratchet straps over, but the biggest issue is overtightening or having the ratchet mechanism pressing against the canoe and causing extreme wear really quickly while traveling. Plenty of people use ratchet straps, I am just not a fan! Thanks for watching

@Connor_Dempsey

Жыл бұрын

@@zackfiddis5389 plus most people don't know how to insert and remove ratchet straps properly

“Reefin’ on it”?

I don't know why I watched this after wrongly using racket straps to bring a canoe home from FB marketplace...🤦‍♂️

If you tie off every thing to crossbar you have no backup plan so no insurance . I more so relied on hood and back mount then all of the rest

Nylon ropes are NOT no-stretch, as you indicate. Polypropylene ropes are no-stretch.

Could be a 3.min video

Don't listen to this guy. Ratchet straps are the best.