Man, I like your delivery. Straight. Info focused. No frills. Keep it up

Hello Derek, here's update, small bead of clear drying caulking going across the visor(not on the edge though) works perfectly.

Hi Derek. As I mentioned, I would install the velcro to run the test. And I did it. Incredible. I was able to ride at 100km/h with the screen open. Fantastic. If you allow me, I would like to create a KZread video in Portuguese talking about it and presenting your video with the solution. This will help a lot of folks here in Brazil. Well done.

@dbmiller6

11 ай бұрын

Sorry, not on here very often. I would be delighted! Please do (and if you have already, I perfectly understand). I'm living outside Barcelona now. We need those visors open! Happy riding.

@dbmiller6

11 ай бұрын

(I meant Brazil, of course!)

@quesreal2552

9 ай бұрын

Try a bead of clear drying caulking instead. You can shape and form it however you need, it's waterproof.

@acbike

9 ай бұрын

@@quesreal2552 Good idea. I will try

how come no more have liked this vid of yours , i didnt know this and its awesome tech for a cheap solution!!

Thank you so much!!!! After 2 months of terrible whistling I can finally enjoy my new helmet

@dbmiller6

11 ай бұрын

My pleasure.

@quesreal2552

9 ай бұрын

try a bead of clear drying caulking, you can shape it however you need and it's water proof

Going to try your trick because my 650 USD Arai Tour x5 has a terrible whistling noise from 35 mph with the visor open... The higher the peak, the louder the whistling gets. Arai's official answer to the problem was "close your visor then".

Hi Derek, I ride a GS 1250 with an AGV K3 helmet and usually partially lift ( first notch) my visor for more airflow at lower speeds. And yes…I must admit I whistle when I do not know all the words! 🤣 Thanks for the info. Marc, Quebec, Canada 😉🏍

Hey Master, Thank you. I knew I was not the only person in the planet with this problem, but same as you I couldn't find anything about it and it is not letting me enjoy my CBR 600 F4 and the thing is that I really like my helmet but I hate it at the same time. I though the whistle came from the air passing between the visor and the helmet not over the visor, but I gonna try this right now. Thank you again

@dbmiller6

Жыл бұрын

Let us know. I'm certain this isn't the only cause or the only solution. But it definitely ONE of the causes, this solution works for it. The basic idea, though is: break up the smooth flow of the wind over the spot that's annoying you. The joy of velcro is there's no harm done by trying some in suspect-spots and it's cheap and easy to get. Happy riding.

Thank you so much Derek. I had a whistle coming from my otherwise fantastic Forcite Mk1 Founders Edition smart helmet. It was driving me insane. Your hack got rid of it. I can now enjoy wearing this helmet :)

@dbmiller6

Жыл бұрын

And that's my reward. I'm delighted. Ride safe, pass it on!

@peterimbesi6374

Жыл бұрын

@@dbmiller6 , I have definitely passed it on and will continue to do so. Great work, thanks again :)

Thank you , Im gonna try it👍

Thanks you I tried it, it worked also you can stick that inside also that also works more neat and do not hinder the aerodynamics of stock

I stumbled across this looking by chance, I had been bringing my visor down a notch or two to stop the whistling, going to try this though. Thanks for the heads up

@quesreal2552

9 ай бұрын

Try a bead of clear drying caulking, you can shape it however you want and it's waterproof

Thanks a lot for the idea. I have the same issue now that I have moved from a versys 650 to a F 800 gt; where the riging position is the one you describe. I have the puig touring screen which is higher than the original and protects your chest, shoulder... BUT sends the air directly towards that area of the helmet. Let´s try your solution, for its simple, cheap and, most of all, logical Greetings from Spain

Thanks mate. Great to know. I’ll give it a try!

@FillH2os

Жыл бұрын

It fixed it!

thank you , thank you , thank you, i have 3 shoei helmets, one brand new that all whistle like crazy with the visor open, this works like a charm, amazing, dead quiet, i used the soft side of the velcro and the hook side just to try it and i think the soft side works better than the hook side, it works so good i don't think i will experiment with anything else. you a friggin genius man/. get a patent if you can.

THIS IS JUST GREAT!!!!!!!!! Thanks bro

I am going to add this here first as a thank you very much. Wish everyone that found a solution to a problem would share it! Second this happens with the MT Thunder 4 SV. Maybe in the future guys with the same helmet can find the solution here. Thank you again Derek! Safe riding to you!

@onurklc8278

2 ай бұрын

Does it work?

This dude is funny and smart

Thanks, I have the same problem with a new Shark helmet when it's shut!😬

My Shoei NXR2 is currently back with Shoei after struggling with a whistle when the visor is shut but not fully latched down for the last 6 months. My guess is same issue. Think you've cracked a major issue with helmet design here. Thank you for sharing this

@ramonovietsj

3 ай бұрын

Did Shoei offer a solution?

@jowen85

3 ай бұрын

@@ramonovietsj no, they were useless, however, I accidentally found out that one of their top level racing helmets has a very similar visor mechanism, which didn't always drop down. I bought one on the off chance it may work on my helmet and allow it to be open just a bit. It did and it does. Through the winter, with less air getting under the helmet the whistle is less anyway, but I can now choose to have the helmet cracked open if i choose to. Can't remember the name of the other helmet, Spirit or similar... their £700+ one, visor mech looks a bit like carbon, but isn't. Shoei were useless, just said it wasn't a manufacturing fault. No, it wasn't, it was a design fault. Next time I'm getting an Arai.

@ramonovietsj

3 ай бұрын

@@jowen85 Thanks for sharing!

Riding a monster 796 with a K6S brought me here… $900 and dealing with the whistling

@quesreal2552

9 ай бұрын

try a bead of clear drying caulking, you can shape it however you need and it's water proof

We do this on aircraft leading edge on some aircraft . Not for the same reasons . but to reduce unwanted flow of air over the wing . This is to direct air flow over the wing at a lower air speed and in high alfa angles of the wing . As it looks what your using the Velcro for is really doing the same thing but in a effective way but a bit cruder way . Is it worth it well vary much so . A great Idea . Matter of fact this can be used for many aspects of the helmet it self in stoping the anoying whissling noises and wind buffing . A good way to find out is to tape paper strips on to the helmet and to use a fan to find all the turbulances around the helmet Using this to make the air going around the helmet and over the strips of paper to flatten out onto the helmet . If there is any turbulance the paper will be pulled away from the helmet . If there is no tubulances and a true flow of air the paper will cleing to the helmet . There is not prevention of this from the back side of the helmet and that cant be help but in front , side and around vents it can .

What can I say, but thank you so much.

@dbmiller6

Жыл бұрын

My pleasure

Uau. I have 3 helmets and all do that. It is really annoying. Interesting that I came here right now because I am at N-th attempt to solve it, at least with my Bell Star Helmet. I just went out to test another workaround. Solved it but really really ugly solution. I put something between the helmet and lens. And like you, I am for ages trying to find a solution in internt. I am right way to apply those Velcros and run for a test. I really fed up with the whistling. Thanks and regards.

@dbmiller6

Жыл бұрын

How'd it go?

@acbike

Жыл бұрын

​@@dbmiller6 Unbelievable. How something so simple solves an annoying problem. When I bought the helmet I activated the warranty complaining about this. Sent the helmet to them and the answer back was "Helmet is within the specification and no problems found". I replied that sometimes the visor has to be open, running slow in hot weather for example and again they returner saying "The helmet is designed to operate with the visor down". So, finally the offered me to exchange by another model. Just saying all this to reinforce who bizarre it is and acknowledge how simple is the solution implemented by Schuberth and most of all you insight in this workaround. Now, as you say, It is in perfect NEW operation mode even up to 100km/h. Great content from you, Thank you.

Your idea inspired me to experiment with other materials to reduce wind noise emitted from top edge of visor when in full up position. So far I've succeeded with a round firm piece of shoelace held in place at the top of the visor ( not on the edge though) with hockey tape. The hockey tape is fabric like and nicely flexible and peals off without leaving residue. Next trial is with a nice bead of clear drying caulk in the same place where the string and tape were. With the caulking I can cut out segments of it at different points to fine tune the disruption of air flow over the visor.

@t-rex4211

9 ай бұрын

What lid did you do it on?

@quesreal2552

9 ай бұрын

@@t-rex4211 an HJC lid, NY current one.

@quesreal2552

9 ай бұрын

@@t-rex4211 ...my current one, not ny

@t-rex4211

9 ай бұрын

@@quesreal2552 Ah ok cheers. I’ve got an AGV similar to vid lid. I think mine is the vents as block wind with hand and quietens a bit. I guess all visors are pretty much the same though so I’ll try your idea🫡

@quesreal2552

9 ай бұрын

@@t-rex4211 May you have a steady hand when applying the caulk, good luck and good day, thanks for chatting, perhaps you can update me with how it all works out.

Funny how I came to this video - I purchased a Schuberth S3 and, despite mild whistling during the test, after paying for it the whistling just went through the roof. In my case, it's when the helmet is cracked open to the smallest gap - ie, driving in traffic and not wanting to steam up. It's driving me crazy and I just can't have it. One of the reasons for getting a premium helmet is having the ability to control how many many degrees the visor opens; if having at the lowest setting turns it into a musical instrument, then it's not a premium product.

Do you color the velcro on the outside or inside?

👍

Anyone know any good quiet helmets drop a comment, cheers

I was riding yesterday on a new bike the first time and had a terrible whistle over about 40mph but my helmet was fully closed , any ideas ? thanks

Yesterday, I bought an LS2 STORM. Whenever I go above 90KM/H I can hear that whistling sound on the left ear only. What could possibly be the cause? The noise is fading away when I am putting my hand on the left side of the visor. Please suggest something.

@milosklimovic3997

11 ай бұрын

I have the same helmet and same problem, it's happening even with visor down, Did you find a solution?

@singhrawatbipin

11 ай бұрын

@@milosklimovic3997 no bro, there is no solution. I got it replaced with some other brand.

Bedazzle it instead to give it more pizzazz 😎

My helmet whistle even when the visor is down. Should I try this same solution?

I had a helmet whistles with visor down. Every time I turn my head. Any idea? Thanks for video.

@dbmiller6

Жыл бұрын

If it's the "flute problem," the diagnostic question is: What is (or could be) causing it? Maybe a vent? Maybe the hinge? Try adding some velcro or something else that will break up wind in suspect locations. Riding with something CHANGED as an experiment is my recommendation. Worse comes to worse … you went on a motorcycle ride.

@singhrawatbipin

Жыл бұрын

Same issue.

@everyone Please tell me what the name of the German Helmet was ? I want to by one... thank youu😊

@thecatcat5442

Жыл бұрын

Schuberth. The C3 Pro, but that's older now. Look into the C5 now. It's wonderful but pricey. Worth it if you can afford it.

Duuudddee, if this works, I will literally send money to your favourite charity. My new Shoei Glamster came in at $800AUS and I was beyond disappointed re the whistle… I’ll let you know (and for real, will donate $$) Have a great day!

@frontsnatch

Жыл бұрын

Also, on the top of the visor, or under??

@frontsnatch

Жыл бұрын

Can confirm- I bought little Velcro circles as a test and it honestly worked. More tweaking, sure but as a fix, this is pure genius. $50 to your charity of choice is ready to be sent. Thanks mate. (From a happy Australian who hates having the visor down in our current heat!)

@jowen85

Жыл бұрын

My NXR2 too

@dbmiller6

11 ай бұрын

@@frontsnatch It was my pleasure. Happy riding and all the best.

@rafa84612

5 ай бұрын

vDo you color the velcro on the outside or inside?

So ride with the Visor down, or the modular part of a helmet down. That's stupid to ride with these up. Of course your gonna get noise.. how stupid...😅