Thanks for a great, well explained, brief video. Just what I was looking for.

@BigSungHobbies

2 жыл бұрын

Glad it was helpful!

Super clear and instructive video showing all the steps at a pace that is easy to follow. Thank you very much indeed.

@BigSungHobbies

2 жыл бұрын

Glad it was helpful!

Super clear instructions! Thank you for this.

@BigSungHobbies

Жыл бұрын

Glad it was helpful! Thanks for checking out the video, and leaving a comment.

I'm an idiot and should have watched this video first. This made it so much easier than the way I thought I had to do it haha

@BigSungHobbies

2 жыл бұрын

I think lessons learned from mistakes are worth much more. Now you know what to do and not do.

I’m sure glad I watched this before mounting my new tires. I was getting ready to use the headlock to clamp the tire down. Your way is much better.

@BigSungHobbies

2 жыл бұрын

Glad I could help

Thanks a lot!! 👍

@BigSungHobbies

3 жыл бұрын

Glad that the information helped!

Wow wish I would of seen this before starting my third wheel. Haha I’ve been doing it the hard way. Didn’t even think about starting for the other side with less screws

@BigSungHobbies

2 жыл бұрын

Next time, you will get it done in no time.

EVERY TIME I see someone online doing beadlocks it looks so fuckin easy yet when I try to do it theres no fucking way in hell.

@BigSungHobbies

3 жыл бұрын

I think most videos make it look like it's something that can be done in few minutes, but it is not. It does take a long time since there are so many screws, but if you take it slow, it's not too bad.

So no loctite on the inner screws and just the outside set?

@BigSungHobbies

Жыл бұрын

I have started to add blue loctite on both outer and inner screws as long as it's going into metal. If you have plastic beadlocks, then loctite should not be used.

Succinct. 👍

@BigSungHobbies

Жыл бұрын

Thanks!

🤔Now will it be just fine if I use blue loctite on all the screws? Instead of just the first outer rim.

@BigSungHobbies

3 жыл бұрын

Yes, definitely. Blue loctite helps to keep the screws in, but it’s not permanent.

what do you do when the back ring wont line up because the beed seems to thick. also I've had a problem with dual stage foams also as it seems the insert moves in side the tire a little bit, and it makes look real wobbly

@BigSungHobbies

Жыл бұрын

Try using longer screw as a guide. I haven't had issues with mine, so it's tough to help without being able to see the issue. If you are using Proline dual stage foams, then due to the size of the foams it should not be an issue. Crawler Innovations tend to be a bit smaller, so you will need to make sure they are mounted center.

@stevenbrooks7776

Жыл бұрын

I dont what bra d foams are they are a house brand. Are dual stage really all that great? As of yet I haven't seen any advantages

@BigSungHobbies

Жыл бұрын

The benefits of dual stage foams can be seen during sidehilling. Keep in mind that there is a reason why most LCG rigs run dual stage foams.

Hey nice nice video Do you think the Beadlocks can fit on a traxxas slash?

@BigSungHobbies

2 жыл бұрын

I am not quite sure. I remember Slash having 2 different sized beadlocks where the inner had bigger beadlock assumming to fit the knuckle though.

@stevenbrooks7776

Жыл бұрын

I'm running1.9 tires on mine with no problems

BLUE LOCTITE,NOT LOCTITE PURPLE222?

@BigSungHobbies

4 жыл бұрын

Yeah, I use Blue loctite, and it works fine. I have not used purple, so not sure on that one.

@scottpray7252

3 жыл бұрын

Thanks for the video!

i thought the mark was to say "this is the outside of the tire"

@BigSungHobbies

2 жыл бұрын

The mark is to note the compound, either G8 or Predator, in the case of Pro-line tires. The tires are not directional so you can use either way. Personally, I prefer it hidden, but I have seen others the other way...just comes down to matter of choice.

@t.c.tristenmccarthy1920

2 жыл бұрын

@@BigSungHobbies ah good info! Thank you!

@BigSungHobbies

2 жыл бұрын

@@t.c.tristenmccarthy1920 You are welcome!

@stevenbrooks7776

Жыл бұрын

on real tires it is the heaviest point