You're like the only one who shows this process. Thank you so much!

I will be building one like this to fit in my STI and then I will start my journey of mobile detailing and being my own boss… thank you for your knowledge, brother…

@Flatfourdetailing

9 ай бұрын

Hey man I’m building one for my wrx. Good luck too you

@FutureTrunksSSJ1

3 ай бұрын

How’s it been for you two. Hope all is well and I hope you guys actually started your journey and not given up

Looks awesome. Very clean and professional. Everything has its place. Great job!

Love that you actually show some of the plumbing work ! Keep doing more builds ! 💪🤙🏻

Thanks for helping us out bro. Working on getting my setup complete but having a lil trouble getting some fittings out here in El Salvador. All going in a 2009 Nissan Sentra.

It's really nice getting step-by-step instructions from another Ryobi junkie! 👊😄😉😚😎🇺🇸

Slamming Set Up. Keep up the great videos. Garcia's Automotive Detail Tucson Az

Great work! Clean and professional looking.

Thanks to your video I just did the same mod for my Amazon air hose reel to pressure washing conversion 💯💯

Ive been waiting for this video, thank you

Thank you so much for uploading this video and for all your time putting this together. This is going to help so many guys and gals. Please remember to add this one to your favorites. Super clean job and setup. Your first impressions are everything!. I've been at this for 50+ years and I can tell you that you have about 3-4 seconds to make that first impression. Show up clean, ON TIME, organized, and wear hats, shirts, and pants/shorts that display ONLY YOUR COMPANY LOGO! Become the advertisement for ONLY your business. Never Nike, Budweiser, NFL, etc. (unless of course you're being paid $millions to do so because you ARE IN FACT advertising for them). You can make upwards of $100,000, but you must be professional. Underpromise your services and overdeliver! Do not be the lowest price in town, your customers already passed on them and besides, those customers that want the lowest price tend to be the ones that complain the most. Again, Thank You for your video, and have a Happy 2024 New Year!!!

Good job!! Awesome vid brotha!

I just subscribed to your channel. The build looks great. Thanks for sharing your knowledge. 🎉

Thanks for post, very well done, very informative Really enjoyed how you describe in detail and listed parts and equipment

there is no waste in this video thanks for sharing 👊🏽 .

Hands down to this video 🙌🏻 you know how long I’ve been looking for a video to show a diy pressure washer skid without using all types of expensive equipment. I never leave a comment on videos but this is a must. Great work with talent. Straight to the point with details THANK YOU VERY MUCH 🙏🏼

@revibeautodetail

Жыл бұрын

Thank you so much brother! 🙏🏻

@zurc597

Жыл бұрын

Same 🔥

@isaiahgarland7615

Жыл бұрын

Same

@piggybank9899

Жыл бұрын

​@revibeautodetail8044 Where you get that board from that's attach to the water tank it's not in the description.

I'm actively trying to start a detailing business out of the back of small crossover, you are an awesome person for making these videos man. I can not tell you how much I appreciate you.

wassup brother G!! awesome video fun to watch

Man, you’re giving great information. This is super helpful for me.

@revibeautodetail

Жыл бұрын

Thank you 🙏🏻

@hulamac74

Жыл бұрын

@@revibeautodetail how much

Great setup!

Amazing video man

Good stuff!! Great tutorial and knowledge 🙏💪😮‍💨

@revibeautodetail

Жыл бұрын

Much appreciated

Awesome set up :) champion!!!

@revibeautodetail

Жыл бұрын

thank you!

I love your setups, I would love to do one for my Honda Pilot 2005 one day

Pure talent... great setup enjoy watching

@revibeautodetail

Жыл бұрын

Thank you so much!

Nice setup, much success in your business

@revibeautodetail

Жыл бұрын

Thank you!

Great video bro. Amazing. You got some good energy too. I hope to someday setup my Honda Fit.

@revibeautodetail

Жыл бұрын

I would love to setup a fit!

Very good videos and Thanks,,,,I learn a lot...

Appreciate you i will be doing this exact same thing

pinoy detailer here!! great video lods.. hope to get a setup rig like this one day lol.

Bro I need to see a detailed video on that prius setup I have the car and half the stuff already. Thanks for these great videos!

I’d like to see a video on how you have everything else in the car. Like your wheel brushes, buckets chemicals. Surely you have to go back and refill if you don’t have your gallon chemicals to dilute. Also steamer and a stain extract like a bissle

So good!

Great job

Great video .watch it couple times to see how it's done . 👍 What wood or piece you use for bases and you paint it ? . How is gravity feed working out for you ?

such an underrated channel! 50km subs tbh

Great video! Thank you

@revibeautodetail

Жыл бұрын

Thank you!

Exito carnalito.

Good job

Nice set up really helpful but do you have links to the PVC fittings both elbows and reduced I can’t seem to find them in my local home depot

Impressive how you made this happen in a 300! Nice work!

@revibeautodetail

Жыл бұрын

Thank you!

Thank you for this DIY video! 🍻😎🫡

This man has his game on lock.

@revibeautodetail

Жыл бұрын

Thank you Sal! 👊🏻

This is awesome! I love your creativity! How do you get customers? Do you do mail marketing?

Thanks for sharing. What is a ballpark figure for this setup? And how do you power this rig using retrofitted alternative car power?

We need you in California 👍🏼👍🏼

@revibeautodetail

Жыл бұрын

i am in Oakland CA brother!

Can you post a video of the Ryobi having a consistent pressure flow by just being connected to the water tank?

Hey excellent content. Quick Qurstion. what are the actual sizes of the 2 elbow pvc fittings?

I saw in your old video where it had the breather valve on the tank. Do we need it for this set up and if so can you please share a link? Thank you!

You can even buy a storage deal. For the top of your car. And use it for storage also. That’s what I’m going to do for my Prius.

@revibeautodetail

Жыл бұрын

Yeah i have that idea too, but I haven’t bought them yet but i will soon! 😁

Do you not need a pump inbetween the tank and pressure washer? Does it just use gravity feed?

Can you do a test on the water pressure do you need a pump to feed the power washer?

Hello, good morning, I like your videos and I liked the configuration. For the Prius, do you have a video on how to install it from the beginning for the Toyota Prius.

Just subscribed. Think about downgrading my tank and pressure washer to be more low profile. I have a 2300 ryboi and a 50 gallon tank.

Nice neet work, I maybe in touch for a set up on a Rav4

Awesome video What was the size of the reducer

love

Awesome. How do you do the setup. Base on car models and how much is the cost for everything shipping and made of the equipment?

I have a question about the water tank. How do u keep it from pressurizing and exploding when using and filling. Do u just leave one of the valves open?

Im new to all of this but how would you fill up wash buckets using this plumbing setup?

Awesome setups. I redid my focus hatchback based off of your designs. But warning these water tanks don't like being stood up vertically like in the Prius. The sides bulge like crazy under the weight of the water. Just a heads up. Still super nice setups tho guys. Everyone thinks you need a huge van. You don't at all.

@revibeautodetail

Жыл бұрын

Thanks man! About the tank i put good amount of support on the bottom of that tank coz i know it will happen 😁 thank you again!

@roflips6314

Жыл бұрын

@@revibeautodetail I read these tanks need to be vented. How do I do that.

@GG-ub4ej

Жыл бұрын

​@roflips6314 I would guess you open the shut off valve for your fill side while using the pressure washer. But not sure how to vent while filling. The one in the prius had a vent but it was standing.

@PlayerUnknown05

9 ай бұрын

I'm designing a trunk setup for my 4Runner with a 40 gallon classAustoms tank stood vertically. Does your tank seem like it might break from being stood vertically or is it good to go?

@marcusmack3632

9 ай бұрын

@@PlayerUnknown05 its definitely not meant to be vertical. The side bowed out and the top was collapsing under the weight. I've turned mine horizontally now.

I’m trying to put this set up in my 2018 Buick regal sportback

Starting working on a project using your design.... The conversion is actually smaller then the sedan. ... It'll be put in a mustang . I do however have some questions relating to the wiring and if there are any items NOT listed in the description. If you can get back as soon as possible it would be a great help!

Salamat!

How does the tank vent when filling ?

awesome video! -What's the screw eyes size by any chance? I couldn't see it on the package and in Canada they don't sell it in packs of 2 unfortunately. -What's the size of these 3 wooden pieces that hold the Water tank, please? - How many Gorilla Black Spray did you use to paint this Plywood? :)

Very nice and simple setup. I love how minimal it is. I am thinking of doing this in my Honda Element SC. What type of wood did you use for the base?

@revibeautodetail

Жыл бұрын

3/4 plywood

@authentikautodetailing

Жыл бұрын

Do you have links to the straps you used to secure the pressure washer and water tank? And those little silver screws that go into the wood for the straps. Thank you!

@nelsonluyando4725

7 ай бұрын

Can't find the hose converter anywhere. Only 3/8 appears ,any suggestion?

What size is the reducer ??

Hi thanks for tutorial videos, are you able to put links for these items for home depot. Greatly appreciate it if you can

How is the tank vented? The website shows not to have a pressurized line (such as a garden hose)? Or how may I modify the tank to allow an opening where I can fill it up by just pouring water in through the top of the tank? Is that possible? Thank you!

Great video I'm doing this build on my Corolla, quick question whats the size of the PVC reducer?

@revibeautodetail

Жыл бұрын

1/2

What size of the bolt you used for the mounting of the power cord retractor?

Curious to know how much are you in it after buying all the parts and how much with the labor to put it all together out the door for someone

Gonna build this in a 05 Acura tl

Can you do a video on how you made the promotion sticker for your car please

What did you use for the air vent. You missed that part when doing the plumping

We’re can I find the 3/4 compressor jumper hose to M22 fittings at ? For the pressure washer reel ?

I’m sorry I may be slow but if we have a tank and a electric power washer like yours. We don’t need a generator or a machine powering the water ?

Hi mate, I was wondering what is the final height of the tank once set up ? I work out of a 2014 vw passat and have no room for messing around. The measurements of my boot(trunk) is Length 45inch width 40 and max height 18i.

@mmalivetv3

Жыл бұрын

BTW i love this set up, by far the cleanest I have come across in my years of doing this.

@scottroy1641

Жыл бұрын

If you measure the thickness of the plywood plus the thickness of of the 2x4, assuming you add those, you can minus that from the avaliable height for your tank. If you're going to build this you're going to have to figure stuff like this out. You have a good start though because you know the dimensions of your boot. I would double check your measurements though. Measuring from the lowest spot (such as a speaker going through the ceiling of the boot) and the narrowest spot (such as the wheel well that intrudes into the boot).

Lovely Setup Bro ... Is this like a gravity fed system ... I can't see any pressure pump in between the water tank and the pressure washer ...

@revibeautodetail

Жыл бұрын

Yes it’s gravity fed.

Genuine question, who'd you go through for the shirt? I prefer a collard shirt and that one looks like it BREATHES.

The Driver trippen

What about the other hole on the top right of the tank we just leave it open ?

@J.M.A.D

3 ай бұрын

trying to figure out the same thing @revibeautodetail

I did the exact thing with the air hose reel from harbor freight, hasn't given me any problems yet

@revibeautodetail

Жыл бұрын

Same here! 👌🏻

@vladimirvillegas8266

Жыл бұрын

@@revibeautodetail how much you sell them if you can make one for me

@revibeautodetail

Жыл бұрын

Dm me on instagram.

@vladimirvillegas8266

Жыл бұрын

@@revibeautodetail what you ig

@dannifl6329

Жыл бұрын

For the last fitting is it 1/4 to 3/4 fitting because i can’t find it anywhere? Thank you

Que tipo de generador eléctrico utilizas?

How would you do a set up for winter

Who made the shirts? They look so sick!

@yves8836

Жыл бұрын

Who made the shirts!!?

Love your setup! May I ask what material you used to mount all those reels and bottles? Is that wood?

@revibeautodetail

Жыл бұрын

3/4 plywood.

@bakad7424

Жыл бұрын

@@revibeautodetail salamat po

@revibeautodetail

Жыл бұрын

@@bakad7424 salamat!

Bro puedes hacer uno en español, y dando el servicio de lavado porfa

Where do you find this water tank in Canada??? Doesn’t anybody know

Where can you get a flexzilla hose that connect the pressure washer reel to the pressure washer?!!

Where did you make your shirts?

@OG_LONEWOLF

9 ай бұрын

No response ❌That was expected 💯

Using an air hose reel for a pressure washer. Are you not worried about rust???

you are a genius, thank you!

Sup man you do an amazing job where you located ? I’m interested on a set up

@revibeautodetail

Жыл бұрын

Hey there man, im located in Bay Area. Hit me up on instagram @revibeautodetail.

Do you have any problems with gravity feeding the pressure washer? Is there any recommendations on gravity feeding?

@revibeautodetail

Жыл бұрын

No never had an issue.

What size pvc reducer bushing?

So how come you didnt make a vent for the water tank? That tank has to have a vent for fillup no?

What exactly is the reducer specs? I tried looking at my home depot here in Canada, and coming up blank. I have the water tank all set, just the reducer

What was the size of the PVC reducer for the water tank?