Battery will not charge when the engine is idling. The little power the generator delivers at idle is barely enough for ignition and lights/electronics. You can check that by using a clamp-on amp meter. Rev it up to 2500 rpm. And keep it there for a few minutes. Cheers 👍🤝

2nd method was helpful for me today when we are in lockdown and no mechanic was available and I had to go out to buy essentials. Thanks a lot 😊

It seems like you have been doing this your whole life!! You are a expert!! Thanks for such an easy demonstration, hands down the best demonstration on KZread!! Thanks a lot Sir!!

I got a trick too, *turn on the engine switch *put gear on 3rd *pull on the chock switch located nearby Rreserve switch *grab clutch & roll the bike until it reaches a good momentum to rotate the shaft *then release the clutch *after you notice bike gets started suddenly grab clutch agian otherwise it may get crashed. This worked for me. 🙂

2nd method is really helpful. I was always making my bike run upto 20 and popping clutch, it used to sometimes start, bt mostly fail to start, then when I saw u do it with so much ease, I tried popping the clutch and pulled it back. That worked like a charm!! Thank you so much!!

@TheAshishDdaviddShow

2 жыл бұрын

Same here. I didn't know you pop and pull. I used to just leave the clutch.

Great info, I watched a few others but have never seen the 1st method, and your explaination of the 2nd method was very well put.

Thank you bro... You saved my day The first trick of starting the bike turning the wheel helped me to start my bike

@TexoBot

4 жыл бұрын

Happy to hear that, we will come up with more helpful videos like this in future!!

Great...my bike was not starting for the last 15 days.... started in first attempt with your technique.... Thanks 😊

You’re method of putting the bike in 2nd gear, and popping the clutch while moving forward saved me! Thank you!

Thanks, i used 2nd method today on my Avenger 150 cc. It really worked. thanks

Today I had concern as my bike doesn't have kick-start what to do.. then I found your video.. very informative and helpful.. keep the good work.. 👍

Thank you sir .. u saved my money as well as tym ... bike started within seconds ... 👍👍👍

I always use the 2nd method, but on my TVS Apache, it has not worked many times. I really wish these bjke manufacturers just put a damn kick rod. I have a dead battery, and will try your first method - thank you so much for sharing. Glad I saw this - was going to call the TVS Road Side Assistance and saved my self from burning a hole in my pocket.

Excellent Bro..Just started my Apache RTR 200 in two attempts.. Battery was dead during lockdown..No jump start no ,no bike push..Its so easy Thanks 👍..

@TexoBot

4 жыл бұрын

You're welcome. We are happy the video came in handy during tough times, mate!

@TexoBot

4 жыл бұрын

Is your bike an FI or a carb version?

@nareshpamarthi4558

2 жыл бұрын

@@TexoBot bro it's work or not, it's your engine was Fi

Thank you very much your help! And you made my day!

Thank you so much! This really helps, from philippines

Never knew we can start a bike like this😂😂woooww but funny

I've never seen a bike started this way, thank you for the video.

Thank you so much sir its always value added for all... 🙏 I appreciate the work and the time you have spend for people keep teaching sir.... 😊💐

I started my bike with 2nd method , thank you a lot 🙏🙏🙏

Thanks a lot brother. My Pulsar 180 wasn't used for 2 months and faced dead battery issue. Was able to start with the first technique.

@TexoBot

3 жыл бұрын

Happy to know that it helped! Please do share this video with your friends.

To day I started my fzs v3 by the trick you have shown in this vedio. Thank You. But really its hard. But Running bike upto 10 feet and then releasing clutch is also good method. I used thus tecnic also. Its is easier than rotating the wheel.

Thank you so much for this video, it has helped us to start our bike, the first method really worked😄

@TexoBot

4 жыл бұрын

You're Welcome. Happy to hear that the video has come handy during tough times. Do subscribe and share. You never know how many of your friends may face the same issue!

Thanks. First method worked with little pull

It worked in the very first spin👍🏻

Thanks bro to help I was aware of the second method but forgotten you made me remember it

@TexoBot

4 жыл бұрын

Anytime, mate!

Very clear explanation , today it is clear for me how to start without battery or kick Awesome bro 👍 keep doing the great work

Thanks buddy, I love you for this! My rouser 180 has no kick so every time my battery connection malfunctions I always end up just carrying it to the mechanic.

I had same issue today. And have to left my vehicle at home. Will try these ideas once I reach home.

Great video!!! Very useful I’m struggling with something like this.

Thanks man, valuable video every beginner should watch

Yeah!!! It worked bro. Thank you very much ❤️

I've never seen the 1st method, and you did the 2nd method a lot easier than most people do. They start running beside the bike. You run ON the bike. LOL. Thanks for the video.

@TexoBot

4 жыл бұрын

If you run beside the bike, most of the times, it may so happen that the throttle response might be lost. Better to be seated on the bike to get a better control of the situation 😁

@noot7109

4 жыл бұрын

@@TexoBot yeah, it seems better. :D

Thankyou this 1st method worked for my rtr200

Thanks. Your video helped immensely - money and stress 😊

Thank you for the idea brother, much love from Philippines 🇵🇭👍😊

@thelifequotechannel

Жыл бұрын

Cheers, mate! 🍻

Tq boss. I did not know the first one. Simpler and really helps with middle age man like me. 2nd one well known.

@TexoBot

4 жыл бұрын

Glad to hear it has been of use to you. It's the feedback like these that encourage us to co.e up with videos. Thank you for your time.

Tq very much......the 2nd technique worked very well.....👍

Awesome stuff and in flip-flops too…legendary man.

@thelifequotechannel

Жыл бұрын

You missed the best part. It was sun rise on a Sunday morning and I was sloshed when I shot this one, mate! 😉 😁

Great informative video Bro, thank you so much for taking time on this

The second method worked for me today... as my avenger was in a germinal state since march 15 of this year

@TexoBot

4 жыл бұрын

That's great! Hope you share the trick/video with your near and dear ones... We never know when it might prove useful!

2nd method seems really good, i am gonna try it

It really worked for my bike..Thanks alot

@TexoBot

3 жыл бұрын

Glad to hear that

Bro 😂Thank you You showed how to start the bike when ignition won't work.. Show A valuable video an Technic..Once again thank you ❤❤❤❤

Very helpful video.thanks a lot man.

@TexoBot

5 жыл бұрын

You're Welcome, mate.

If i had seen this video before....i wouldnt have suffered a lot today....thanks bro ...

@sumitmndal

4 жыл бұрын

same here, struck in midnight raining.

@TexoBot

4 жыл бұрын

Better late than never! Next time you won't get stuck 😉

First method will hamper the gearbox and clutch plates to some extent as well. But Yes, it's a best hack in case of emergency when ur all alone. Thanks a lot.😁

@TexoBot

4 жыл бұрын

We agree. Anything that is a hack comes with its own set of demerits. In this case, it's a decision to strand the bike or to start it off and make it work.

The higher gear is so you dont tear your hand off. Stay safe guys and gals.

One of the most helpful videos for bikers .....

Thank you so much for this!

Thanks sir second method works well for me and my bike started

@TexoBot

3 жыл бұрын

Great 👍

Thanks bro!!

Buddy thats a very nice show from you. A very natural way of explaining and the best part is you spoke in English, pretty neutral so that everybody can understand. I request you to stick with English so that everyone can be benefited with your Videos. Subscribed !!!!

@TexoBot

4 жыл бұрын

Happy to hear that, we will come up with more helpful videos like this in future!!

Very very helpful tnx 😊😊

Avenger trick worked for me ... Thanks for the tip..😍🙏

@TexoBot

4 жыл бұрын

Welcome 😊

Valueble information brother

Thank you very much.. that worked..

Your way of explanation is too good....I have tried it on my CT100 ES just for testing the process....it worked very fine....now I have two queries: 1)does this process harm the engine or gear and clutch system? 2) what is the corresponding method for gearless two wheelers,say a scooty?

@TexoBot

4 жыл бұрын

This is an emergency procedure and not done on a regular basis. The harm factor to the engine or the gearbox is minimal if done in one swift turn of the wheel. The harm factor may be overlooked due to the frequency of this method being used. Coming to automatic/gearless/CVT vehicles, I have personally never seen any of them without a kicker. The kicker is mandatory in these vehicles as there is no easy way of starting these in case the battery conks out. Hope that answers the question.

Thank you brother from Philippines

Very big thank you

Thank you. The second method work on my R15 !

@TexoBot

3 жыл бұрын

Glad it helped

@TexoBot

3 жыл бұрын

is it a FI version R15?

@entertainmentadda1602

3 жыл бұрын

@@TexoBotis there any harm in engine because of this method?🤔

Thanks for sharing tips bro...i really need it

Thank you so much sir...

Superb.. Love you🙂 Very nice personality

Great, very good information...thank u so much

@kashthebikerdog1074

3 жыл бұрын

Did I miss something, how are you getting the heavier bike up high enough that the tire isn't touching? I don't have mine on the grass, it's in the parking lot, I listen twice I didn't hear you say anything about getting it up off the ground. I could you really use this right now because my bike is dead and my options are not good

Amazing man thanks!

this is great i will try this thankyou so much

@TexoBot

3 жыл бұрын

You're welcome. Let us know how it works for you.

very good sir thank you for the good information thanks a lot for the video

Good to know info.

Good video ...compared to many other western videos . Very clear explanantion and demonstration ...nice 👍🏼

@TexoBot

3 жыл бұрын

Glad you liked it!

Thanks sir for ur helpful method.... And I noted ur English speech is excellent sir

Useful information. Thank you

Thanks for making this video 👍👍👍

Awesome video Brother

Thank you very much

Nice video sir...thank you

Thank you Sir

Best video ever.

Thanks sir

Thanks a lot ❤️

GREAT VIDEO MATE!

Great explanation!

@TexoBot

4 жыл бұрын

Thank you, mate!

Thanku so much sir

Great info! 👍

Thanks 👍👍.

Thank you it helped me

Great Video.

Thanks helped a lot 🤞🏻

@TexoBot

3 жыл бұрын

Glad it helped!

Great explain ji! Nice!

@TexoBot

4 жыл бұрын

Thank you thalaivaa! 🙂

Thanks for sharing Brother

@TexoBot

4 жыл бұрын

Any time

Nice location. looks like a picnic spot or park.

Very nice explanation 👌 👍

Very Good and Useful information

Thanks a lot.

@TexoBot

3 жыл бұрын

Most welcome!

Tnx...bro

Thank you

Wonderfull.

Great ideas 👍

@TexoBot

4 жыл бұрын

Glad you like them!

Thanks 😊

Excellent 🖐🏿