WHEN INDIAN TUTORIAL IS BETTER THAN OTHER

I stayed away from SMD while in college for Engineering but I decided to brush up on my SMD skills lately and this was EXTREMELY helpful.Well done!

Happy to see you are enjoying our SOLDRON 878D SMD Rework Station!

@Nematics_Lab

5 жыл бұрын

Yes I do enjoy Soldron products :)

@HyperDevv

3 ай бұрын

OMG ITS THE ACTUAL SOLDRON

Yo good video! Thank you! I'm in the middle of researching how to make and design my own PCBs for custom keyboards and your video help me with understanding SMD a lot. The paste is for sue such a life saver it seems with SMD soldering.

This is exactly the video I needed. Concise and thorough

A good video!.... well done....Nice and brief and to the point....Shows all you need to know and all the basics in a short time....Thanks!

Dude this is brilliant. Gotta deep dive in this channel.

Informative and concise, had to watch it twice over. Who could dislike this video?

@michaellapierre1244

4 жыл бұрын

Great video! Someone showed me an easier method for the technique at 3:23. No solder wick needed. Solder a few pins down to anchor the chip on each side. Put a firm rubber mat on the desktop. Next solder one side of the chip with plenty of excess solder. All the pins will be connected together. While the solder is still liquid, pick up the board and firmly tap the side of the board on the rubber mat. The excess solder goes flying off and the pins are all soldered separately on that side. Repeat for each side of the chip. Done.

You're videos are really helpful. Keep up the good work.

@Nematics_Lab

5 жыл бұрын

Thank you!

Awesome..covers every smd...great tut

Came here to learn soldering and when heard d-Based English knew I was in the right place. Thank you very much! 😊

Good explanation and demonstrations

Thank you sir, that was helpful 👍

Useful video 👍 Excellent 👍

Awsome video! very helpfull information.

Amazing content, subscribed!

A really nice video,good narration and good illustration.. All d best.

thanks this video helped me a lot

Thanks brother, really helpful video

@Nematics_Lab

3 жыл бұрын

Glad it helped

Thanks bro !!!

Subbed, great video

thank you very helpful

Thank you very much

Beautiful...

Great Scott...

Great video! Someone showed me an easier method for the technique at 3:23. No solder wick needed. Solder a few pins down to anchor the chip on each side. Put a firm rubber mat on the desktop. Next solder one side of the chip with plenty of excess solder. All the pins will be connected together. While the solder is still liquid, pick up the board and firmly tap the side of the board on the rubber mat. The excess solder goes flying off and the pins are all soldered separately on that side. Repeat for each side of the chip. Done.

@caralynx

4 жыл бұрын

That sounds rather unreliable and a good way to get specks of solder where you don't want it. A better way is to get so liquid/paste flux, cover the pins with it, and drag the iron across the pins. The flux makes sure the solder only sticks to the pins/pads and avoids bridges if there isn't too much solder. Wick off any bridges with the iron by dragging it down the pins and wipe off the iron on your sponge every time.

@michaellapierre1244

4 жыл бұрын

@@caralynx That sounds excellent. Thanks!

Educative!!

Thanks bro

Thanks

I have same smd soldering process using iron box method simple and easy to use .

thanks

Exellent ......

Doing awesome job found your channel really interesting and unique than other channels

@Nematics_Lab

5 жыл бұрын

Thanks

Damn bro v good

Are you trying to copy the video style of great scott if yess it's actually pretty good

@rainthstrive

4 жыл бұрын

I was thinkinh the same, and indeed it is a good format to follow :D

@peaps

3 жыл бұрын

when I saw the thin black pen I thought the same lol

@RandomakerYT

3 жыл бұрын

Ths exactly what I thought!

@bhanumishra6132

3 жыл бұрын

Ya he's trying to copy that

@awdhootkanawade

3 жыл бұрын

White paper black pen and that initial opening with lcsc confirmed it 😂

Hi, this is a great video, thanks. I am starting in the "SMD Universe" (:-)) and I wonder if you could guide my to buy a "starter kit" containing a couple of resistors, transistors, capacitors of a manageable size.

great SMd tutorial!!!! can you advise on the best Solder and Solder Paste?

@Nematics_Lab

4 жыл бұрын

For soldering iron go for Solderon, and I have been using paste from Mechanic (60/40)

@CreativeComputingG

4 жыл бұрын

@@Nematics_Lab I meant Solder only (not soldering iron) :)

Which PCB has audio in and out function??

What solder paste did you use.

Amazing video brother , which micro scope ur using i am a beginner please any one suggest not very expensive microscope

When using solder paste and hot air, is there any excess flux that needs to be clean up to avoid short circuits?

Need this smd model handle soldron

How is T12D+ soldering ? Please reply

May you show that how to replace android phone socket with soldering iron/without hot air iron station, thanks

Please which temperatures are ideal for both the iron and hot air with such components without damaging them?

@Nematics_Lab

4 жыл бұрын

340-380C for iron 350-400C for hot air

What are temperature and air speed for hot air soldering in smd components

@ringtheding15902

3 жыл бұрын

Would also love to know this

The younger brother of Great Scott.

It is awesome I wanted to learn it .

1:33 name of the pen?

Soldering link

Good video. The muzak is distracting. Why is it there?

May I know what is the soldering iron temperature to solder smd component?

@jon1689

8 ай бұрын

380-400c

Which is the best soldering station under ₹ 2000?

@Nematics_Lab

3 жыл бұрын

amzn.to/31FZwVx

Very nice video sir thanks sir plz make this video in Hindi plz plz plz

Indian great scott

What temperature is the hot air

@Nematics_Lab

4 жыл бұрын

380C

Sir, Please answer me ..... Which Model Solder Paste you are used -} ( XG-30/ XG-40/ XG-50/ XG-80) ??? Which Model is best one?

@Nematics_Lab

5 жыл бұрын

All of them are same

@srfaatmee6425

5 жыл бұрын

@@Nematics_Lab Thank you Sir

@srfaatmee6425

5 жыл бұрын

Sir, How much Blower Heater temperature ℃ need for soldering IC/Any Equipments using Solder Paste XG-80 ?

@Nematics_Lab

5 жыл бұрын

Usually around 360-420°C

@srfaatmee6425

5 жыл бұрын

@@Nematics_Lab Thank you again Sir

I want to make a custom pixle driver.will u make it

@Nematics_Lab

5 жыл бұрын

What exactly you mean. can you describe?

@RGBW-DRL

5 жыл бұрын

I want a driver .for drl and turn signal.there are two input ov 12 volt

@RGBW-DRL

5 жыл бұрын

I want a driver in which when drl is running .there will be any effects going on.but when the input of car turn signal on led will be in amber colour.

sie.....what is a number of smd led in arduino uno

@Nematics_Lab

4 жыл бұрын

0805 SMD package

@pravinwaze5526

4 жыл бұрын

@@Nematics_Lab thank you sir

do you not need to use solder flux?

@Nematics_Lab

4 жыл бұрын

Most of the Solder paste comes with Flux in them, you can add it if needed

I don't care about dimensions or terminology, I just want to see a technique on how to avoid messing up the stuff around small SMDs. skip to 2:15 if you're like me

A1

full of short circuit and bridge, please clean it!!!

Hindi m

You literally created a mess with solder paste and hot air gun

Hindi me batao

Enough copy past, be yourself and don't try to copy greatscott!

please for god's sake. use some flux *before* using soldering iron.

You have shaky hands my friend

Well that’s absolutely bad soldering

great scott ka copy kiya, kuch to original kar lo bhai, apne paas bhi creativity hai.

Copied greatscott video style

Are you coping the GreatScott's video format much bro 😂

A bootleg Greatscott channel. Lol..be original man.