I really liked the thick wire against the 5 pin connector. It's so simple, but someone's got to come up with the idea. Thanks for that idea.

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. Yes it really is a simple trick and it does work so easily as shown in the video . It's much safer than trying to remove all the solder from the barrels around the pins. I'm glad you enjoyed it . Thanks again , take care 👍

@romancharak3675

Жыл бұрын

That was my WOWEEE moment too!

@mrsolderfix3996

Жыл бұрын

Hi , thank you, I'm glad you found the video of use 👍

@MeitsMSX

Жыл бұрын

@@mrsolderfix3996 I haven't been in the situation yet, but when I run into it, I'm going to use it. This was (for me) so out of the box that it will be remembered. So please go on and keep on surprising your viewers with new tricks :)

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, I will keep posting when I can , hopefully the videos continue to be of use to people . Thanks again , take care 👍

This is a FANTASTIC video! Makes what I have always believed to be huge problems look so easy to solve!

@mrsolderfix3996

11 ай бұрын

Hi , thank you for your comment, very much appreciated. I'm glad you enjoyed the video . If my channel can help a few people out with their soldering issues then that's great . Thanks again , take care 👍

You have a great calm style of explaining - super clear - thank you!

@mrsolderfix3996

27 күн бұрын

Hi , thank you for watching the video and commenting , very much appreciated 👍

Your channel is the first channel attracts my eye and not waste time to watch your video. Your are really straight forward and practical, while other videos with the same subject drives me confused. They talk too much about tools, theory, and impractical. But your channel is straight forward, I can copy and do it on my own after watching your video with ease. I was curious much on how to repair the PCB, and one of your videos solved my curiousity. Hope you can have more videos on how to repair and rework the PCB.

@mrsolderfix3996

2 ай бұрын

Hi , thank you for supporting my channel , your time is very much appreciated . If my videos can help a few people out with their soldering / desoldering issues then I'm happy . I will always post some more videos when I get some spare time . I'm glad you enjoy my channel , thank you again for your kind words , take care 👍

Very Good techniques. Especially liked the in-line pins removed with a wire trick. Very helpful. You can teach old dogs new tricks. TY

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, very much appreciated. I'm glad you enjoyed the video , if I can help a few people out then I'm happy . Thanks again , take care 👍

@karinje2208

11 ай бұрын

Bow Wow ❤

Very hypnotic watching the best methods of removing all those components. Great video 👍

@mrsolderfix3996

Жыл бұрын

Hi , thank you for watching the video and commenting, very much appreciated. I'm glad you enjoyed it . I've posted a few other removal videos with another one being posted shortly , hopefully these can help a few people out . Thanks again , take care 👍

That single row pin connector trick was amazing ! Cheerz .

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment , much appreciated. Yes it does work really well and can work for some 2 row headers if all the pins are close together and can be heated at the same time. Thanks again , take care 👍

Nice work! I can’t believe I never thought of applying additional flux to solder braid or of using aluminum tape to shield other components! Thanks for a great video.

@mrsolderfix3996

3 ай бұрын

Hi , thank you for watching the video and commenting , very much appreciated . I'm glad you found the video of use , great to hear that . Thanks again , take care 👍

Really excellent tutorial - lots of must know tips and tricks! Thanks so much.

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video, hopefully it can help a few people out with their soldering issues. I've posted a few rework videos on KZread now with other great methods that may be of use . Thanks again , take care 👍

Appreciate one really important reminder: be patient. Thanks for another great video, Mr. SF

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. I'm glad you enjoy the videos , take care 👍

Really helpful video. Using the bit of wire for the connector is a great idea. I have a 4 day SMT rework course coming up and this has helped me get a head start. Cheers

@mrsolderfix3996

Жыл бұрын

Hi , glad you enjoyed the video . I've got plenty of other videos on soldering on my channel ( you probably know this ) the claritys got better as I've gone along . Maybe some of these can be of use to you . I hope you get on ok with all your courses , projects etc , thanks again , take care 👍

Another great video, i especially liked the two iron method, that will come in handy as i have a few to replace on some Roland synth expansion boards, also the trick of using the wire to increase the heat coverage from the single iron, simple but so effective! Thanks again.

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your support of my channel , very much appreciated. Hopefully I can help a few people out with my videos. Thanks again , take care 👍

Another fine instructional video. It looks like you are using a cable tie end as an applicator for the flux. That's good use of materials at hand.

Loved that! The two iron job is great. Well done Guv!

@mrsolderfix3996

Жыл бұрын

Hi , thank you, I'm glad you enjoyed the video 👍

You are the man, takes a lot to show me something I don't know and that's what you have done

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment , very much appreciated. I'm glad you enjoyed the video , I'm still seeing things these days that I've never seen , I've always said no one knows everything , but if we can all share knowledge and ideas then that would be great . Thanks again for your support , take care 👍

Brilliant technique and excellent photography. I enjoyed learning something new, thank you. All the best.

@mrsolderfix3996

4 ай бұрын

Hi , thank you for watching the video and commenting , very much appreciated . I'm glad you enjoyed the video and found it useful , hopefully it can help a few people out with their desoldering issues . Thanks again , take care 👍

Cheers! Thanks for all the interesting episodes, sharing all your knowledge and experiences...

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment and support, very much appreciated. I'm glad you enjoy the videos and find them useful. If I can help a few people then that's great . Thanks again and good luck with all of your soldering projects 👍

Very informative .... I've been trying to remove electrolytic caps on a retro console without damage and this video illustrates some very good practices. Thank you for sharing

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. I'm glad the video proved helpful to you and hopefully you get on ok with your soldering projects. Thanks again , take care 👍

Never thought of two irons. This opened my eyes! Thanks for sharing!

@mrsolderfix3996

11 ай бұрын

Hi , thank you for your comment, much appreciated. I love using 2 soldering irons together, this method is so easy for certain situations. In fact I posted a complete video on KZread a while back dedicated to the 2 iron method. Thanks again for your support of my channel , take care 👍

Loved the 5 pin TH trick basically taking out of the board. Great stuff!

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video , the wire trick along the pins really is a simple effective method . Hopefully these rework methods and ones shown in my other videos can help people out . Thanks again , take care 👍

Did a quick 2-soldering iron tutorial for SMD caps a few years ago, but it's nice to see someone else doing it too. It's good to see soldering techniques being passed on, it's the foundation for long-lasting work. I must find the time to do more videos.

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. I'm glad you agree on the 2 iron method , I just love using 2 irons for lots of different soldering situations. If you do start posting more videos I hope they go well for you . Thanks again for your comment , take care 👍

@KY4K-10

11 ай бұрын

I have to say….. I used the two iron method before as well. Nice video I enjoyed it.

@mrsolderfix3996

11 ай бұрын

Hi , thank you for your comment, much appreciated 👍

@villcrs4110

6 ай бұрын

2 irons are awesome, i also realised with hands on approach that 2 heat guns can do also miracles for desoldering. I had to desolder 12 points toggle switches and some SMB connectors. With one, i fried the boards until they desolder, with 2 job done fast. Mind you about the switches, the footprint was wrong, they made contact but didnt pass through-hole. So they where soldered with 138 degrees paste poured all over the contacts on a hot plate. So it was not as strong bind as if the switch fit the footprint.

Today was the first time I found your channel, as an old tech dog I was still able to learn a couple of new tricks. That encouraged me to subscribe to your Channel. My early days of triodes and transistors was no preparation for smd work. Enjoyed your video.. keep it up. Thanks again.

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. I'm glad you found my channel and enjoyed the video . I've tried to improve my videos as I've gone along ( my early ones are definitely not as clear as my later ones ) , hopefully some of them prove useful for you . Thanks again and good luck with any soldering projects you take on 👍

Not a solder pump insight. Nicely demonstrated. 👍🇬🇧

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. I'm not a big fan of solder pumps , I've probably mentioned it in a few of my videos , I much prefer solder braid , personal choice I guess. Thanks for watching , glad you enjoyed it , take care 👍

Great video. Anything with 8 or more pins has been a pain in the past, but these methods should make it much easier.

@mrsolderfix3996

Жыл бұрын

Hi , it definitely is a good method . I will probably post another video on KZread soon showing more examples of where this method can be used . Thanks again for your time , take care 👍

This is amazing, you make it look so easy, I'm new to this stuff and I still have trouble wicking away solder, it doesn't seem to melt :( but I'm getting much better each try! thanks for posting this up!

@mrsolderfix3996

11 ай бұрын

Hi , thank you for your comment, much appreciated. The more you can practice your soldering you will definitely get better . The main things are a decent iron tip , correct size solder for the job you are doing and flux . Hopefully I cover a lot of the things that are important in my videos so stick with it and watch yourself improving daily. Thanks again , and good luck with all of your soldering projects in the future 👍

@nohrtillman8734

8 ай бұрын

Try soldering the wick just a little to help get the heat transfer started. Once the flow starts it will slurp it right off the component/board.

Watching this video was so relaxing... Great camera work!

@mrsolderfix3996

11 ай бұрын

Hi , thank you for your comment, very much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out with their soldering issues. Thanks again, take care 👍

I've never seen the use of two soldering irons. It looks like a really quick and effective way to remove components. I definitely got to give it a go, thanks!

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. I love the 2 iron method so much that I've posted a complete video on my KZread channel showing all the benefits of using 2 irons . Is definitely one of the best things to help with soldering I've ever learnt. Thanks again , take care 👍

@tylercoombs1

Жыл бұрын

@@mrsolderfix3996 Oh fantastic! I'll take a look. Thanks a lot!

@mrsolderfix3996

Жыл бұрын

Hi , no problem , thanks for your support 👍

@aliveandwellinisrael2507

Жыл бұрын

I've seen devices that have, essentially, a tweezer thing on a soldering iron lol. Achieves the same result, but if you have a second iron, no point in buying a third!

@mrsolderfix3996

Жыл бұрын

Hi . You can buy soldering tweezers but personally I much prefer using 2 irons as if you need to for example bring the irons in from different angles you can do , whereas with the soldering tweezers you cannot achieve this , so for me 2 irons is a much better option.

Absolutely amazing video!! Thank you very much for sharing years of experience! 🙂

@mrsolderfix3996

3 ай бұрын

Hi , thank you for your comment , your support is very much appreciated . I'm glad you enjoyed the video , hopefully it can help a few people out , if it can then I'm happy . Thanks again , take care 👍

Really satisfying, one of the best video out there for people that loves "asmr" like video for desoldering :)

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your support, very much appreciated. I'm glad you enjoyed the video and hopefully other people find it enjoyable as well . Thanks again, take care

Very well explained. I'm trying to learn it your presentation makes a lot of sense. Cheers.

@mrsolderfix3996

Жыл бұрын

Hi , thank you, I'm glad you enjoyed the video and found it useful 👍

Very informative video, I specially enjoyed the blue through hole wire method.

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out . Thanks for supporting my channel , take care 👍

4:00 As a newbie, I couldn't help cackling when the second soldering iron appeared on screen 😂 It's so simple!

@mrsolderfix3996

5 ай бұрын

Hi , thank you for your comment , much appreciated . 2 irons really is a great method , in fact I've done a total video on my channel showing the benefits of using this method . Thanks again for your support, take care 👍

Thanks for the informative video, you make it look so easy :) Sometimes I encounter SMD resistors, capacitors and even chips that are glued to the board and at times its a nightmare to remove them. ( I am mentioning the little glue bead under the component). I am asking if you have any method when you come to removing glued components. Thanks.

Thanks 💗 for sharing beautiful knowledge about Removed components from p.c.board

@mrsolderfix3996

10 ай бұрын

Hi , thank you for watching the video and commenting , your support is very much appreciated 👍

I always tell people to use much more solder to desolder than to solder. An important reason to clip off the used solder braid instead of just working your way up to clean braid is that the used braid draws away the iron's heat, and you don't want that to happen. This is the only one in the series I've seen as yet, but it's clearly a very good instructional video series with professional video standards, and I will suggest my soldering class students watch it. Thank you. What camera setup are you using for these great close-ups of what's happening? It looks like it's perfect for this kind of work, and for inspection as well.

@karinje2208

11 ай бұрын

And it is always a good idea to minimize any tool or materials (i.e. flux, hot braid) contact with the wafer board. Non?

@mrsolderfix3996

11 ай бұрын

Hi , I personally use lots of flux , soldering is so much easier and you will definitely get better joints with flux without it you will struggle at times. Thanks for your comment 👍

@karinje2208

11 ай бұрын

@@mrsolderfix3996 You are very welcome. I remember when I started, the flux residue could cause damage. I was curious if you had a preferred cleaner to use ? Thank you for your attention.

@mrsolderfix3996

11 ай бұрын

Hi , thank you for your comment. The flux I have used for many years is SMFL200D , a non clean , non corrosive flux , so if any remains on the PCB after cleaning you will be ok . Unfortunately it's been discontinued recently. Old style flux if left on could cause electrical shorts as it could cause joints to grow solder fingers , but that was long ago. I have posted a video on KZread showing my preferred cleaning fluids and how I clean boards . All the information is in that video . Thanks again, take care 👍

I really enjoyed this tutorial. I have a dead USB controller on a Raspberry Pi 4 I need to replace from a donor board and I've been putting it off. I'm going to do A LOT of practice before moving on to the actual part using your methods. Thanks so much for this.

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video and found it useful . I have many videos on my channel showing all different aspects of soldering , maybe some of these will be of use to you . Thanks again and good luck with all of your soldering projects 👍

Just brilliant, wonderful. Thank you for sharing.

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, very much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out with their soldering issues. Thanks again , take care 👍

So many good tips, love your videos mate thank you 👍

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your support, much appreciated. I'm glad you enjoy the videos , if I can help anyone then I'm happy . I will always post more videos when I get some spare time . Thanks again , take care 👍

Brilliant as ever, always something to learn from your videos thank you. Shared on twitter incase it's helpful to anyone.

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your support of my channel and for sharing it. I don't really do enough to promote the channel , maybe I should do a bit more so it's been good you've helped me , thank you 👍

you put out some good info not seen in other channels .....good work

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, very much appreciated. I'm glad you enjoy the videos , if I can help a few people out with their soldering issues then that's great. Thanks again , take care 👍

Thanks for your teaching, very useful! fans from Taiwan

@mrsolderfix3996

Жыл бұрын

Hi , thank you for watching the video, much appreciated. Hopefully I can help a few people , take care 👍

Excellent tips.... For aluminium tape - Screwfix (and others) 2" Plasterboard Tape. Its also great for RF Shielding inside Platic Housings. It makes conductivity when layers are stuck to each other.............

I've been contemplating how to remove a battery that is soldered onto a circuit board. It has two tabs, one on each side. Your suggestion to use two soldering irons is, well, brilliant!! Now I can't wait to get to it. Thank you!

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment. 2 irons is a great method that I use a lot . Just be careful with your battery as sometimes they can overheat and pop , hopefully you will be ok . If you do it fairly quickly should be fine. Thanks again , take care 👍

@goodun2974

11 ай бұрын

When desoldering a battery, be sure to wear eye protection; I've encountered battery-electrolyte leakage that sparks and spits when heat is applied to the solder joints, even when the battery measures stone-dead. BTW, If the battery has any voltage left on it, cut the battery out with side cutters if possible and unsolder the two terminals separately,

@mrsolderfix3996

11 ай бұрын

Hi , thank you for your comment, much appreciated. Definitely good advice you've given there , we can all help each other so thank you for that 👍

You’ve great skills and can teach very well, subbed!

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your support, it's very much appreciated. I'm glad you enjoy the videos and you find them useful . Thank you for subscribing 👍

You make it look so easy!!, thanks for the tips

@mrsolderfix3996

2 ай бұрын

Hi , thank you for watching the video and commenting , much appreciated . Plenty of practice and you get to know what works and what doesn't. Also you learn what thickness solders are best ( I only really use 0.25mm and 0.5mm sizes ) , different tips for each specific job , these sizes will become known to you . If my videos can help people along the way then I'm happy . Thanks again , take care 👍

Thanks. Very net and efficient and effective and more to the point

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated 👍

This is so relaxing to watch.

@mrsolderfix3996

7 ай бұрын

Hi , thank you for watching the video and commenting , very much appreciated 👍

Nice work! Very educational!

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment , much appreciated. If I can help a few people with their soldering then that's great. Thanks again 👍

Nice tutorial especially the five pin trick. Good job

@mrsolderfix3996

3 ай бұрын

Hi , thank you for watching the video and commenting , very much appreciated . I'm glad you enjoyed the video and found it useful , that's great to hear . Thanks again , take care 👍

Very neat & clean. I have scrap circuit boards up the ass, so I have plenty of scrap stock to work with & I would probably be able to build my own homemade devices which I've always wanted to do.

Fantastic sir, very best method s,to removing electronic parts, very very good 💯😊 thankyou sir

@mrsolderfix3996

9 ай бұрын

Hi , thank you for watching the video and commenting , your support is very much appreciated 👍

Thankyou for the tutorial. Very useful

@mrsolderfix3996

3 ай бұрын

Hi , thank you for watching the video and commenting , your support is very much appreciated 👍

The wire trick at 21:41 melted my brain and was obvious in hindsight. Less melted mechanical switches!

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, I'm glad you enjoyed the video. The method really does work , hopefully it can help a few people out . Thanks again , take care 👍

Amazing. Just the help I needed. Thanks.

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. I'm glad the video was of use to you . Good luck with all of your soldering projects in the future , thanks again , take care 👍

Another excellent video! Thank you!

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment and support, very much appreciated. If I can help a few people out with any soldering issues then I'm happy . I'm glad you enjoyed this video , thanks again , take care 👍

Excellent. Soldering is an art like thing.

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment . I hope my videos can help a few people out , hopefully we can all get better , take care 👍

Great video and techniques! I've in the past, used the wire technique for removing smaller QFN & SOIC chips too (doesn't work on those with thermal pads obviously) because I didn't have a hot air gun. You'll want to use a slightly thicker solid core wire and bend it into shape around the pins on all sides; then flood the pins and wire with flux and solder and use the iron to heat up the wire and keep the solder molten and just remove the chip. That was my poor man's technique since cheap hot air rework stations weren't a thing back then - Aliexpress and the likes weren't a thing so a 'cheap' hot air rework kit would have been in the hundreds of dollars.

@mrsolderfix3996

2 ай бұрын

Hi , thank you for watching the video and commenting , your time is very much appreciated . It's always nice to hear other people's soldering experiences , the more we put out there the better for people looking for answers . Thanks again , take care 👍

For the electrolytic capacitors I found if they are really old and have leaked on to the board it is easier to put some pressure on the cap and then just cut them with some wire cutters near the bottom and just pick off the left over.

Happy new year Thank you for your time to go into detail how to remove these components. I like the two soldering iron method. Please could you advise whether two 80 watt digital temperature adjustable soldeting irons would work ok for the small components or whether they would be to much? Im thinking of buying a couple from a well known auction site. I only have a 15 watt and 30 watt fixed temp irons and i have smoked nearby components in the past. Would you recommend upgading as they are only about £20 each. Thank you for your time. Have subscribed and look forward to more videos.

hi, amazing videos, i used to work, and i do for training and for hobby, fixing my old stuff, i have a project to rebuild and old technics amplifier, but most modern circuit, multilayer and big ground pads for disipattion has been very struggling for me, i want to know, what brand of tin, braid, and if you use tin sucker for clean pads, because it's no easy to clean the with sucker even without the pin inside

Some pretty interesting methods. If you are not looking to replace any of those components back on, you always have the option to cut the leads and remove the component and than remove the individual leads one at a time... Done that a lot...

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. Your right cutting the legs is an option if you don't need the component anymore. I actually showed this exact option in one of my earlier videos ( 4 ways to remove smd IC ) and like yourself I too have used this method on numerous occasions . The one thing I would remind people is check whether the part has a thermal pad underneath because then you would need the hot air rework method . Thanks again , take care 👍

Thanks for sharing your ideas it's to very helpful to the newbie like me. Great video tutorial lods God bless ang more power to your channel. ❤

@mrsolderfix3996

10 ай бұрын

Hi , thank you for your comment , very much appreciated. I'm glad you enjoy the videos , hopefully they can help a few people out with their soldering / desoldering issues. Good luck with all of your soldering projects in the future and thanks again 👍

Great explanation and techniques.

@mrsolderfix3996

11 ай бұрын

Hi , thank you for your support of my channel, much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out with their desoldering issues. Thanks again, take care 👍

very nice thank you for our teaching

@mrsolderfix3996

Ай бұрын

Hi , thank you for watching the video and commenting , your support is very much appreciated 👍

Very good informative video, thanks for posting

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video, hopefully it can help a few people out with their soldering issues. Thanks again , take care 👍

Great stuff as always , thank you 👍

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your support of my channel , I'm glad you enjoyed the video 👍

Very informative video, cheers mate, keep up the great content. 🤙🏼🇦🇺

@mrsolderfix3996

Жыл бұрын

Hi , thank you for supporting my channel , very much appreciated. I'm glad you enjoy the videos , I will keep posting while people seem to find them useful . Thanks again , take care 👍

thanks for sharing your professional skill 🙇

@mrsolderfix3996

6 ай бұрын

Hi , thank you for watching the video and commenting , much appreciated . Hopefully my channel can help a few people out with their soldering / desoldering issues , if it can then that's great . Thanks again , take care 👍

Thanks mate! Very useful. Love to see more

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. I will hopefully post another video shortly showing a few more removal methods . Thanks again for your support 👍

Spot on video, thank you. Can't wait for something to fail now.........

@mrsolderfix3996

7 ай бұрын

Hi , thank you for watching the video and commenting , very much appreciated 👍

Thank you for the educational video, where do I buy very thin needle pointed solder tip? Do I need to run by lathe to make it smaller? I bought a few electronic item from China, but the problem was: the pins of chip was off centered and wasn't lined up properly onto pcb strip which it won't work. Will the heat gun help lined up the pin legs to pcb strips? Thank you.

exactly what I was looking for, thanks a lot!

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, I'm glad the video is of use to you . Take care 👍

Nice information and techniques, as always! I've had trouble with the heat gun melting solder in the small parts surrounding a big chip I was trying to remove. I get the impression from your demonstration that I should concentrate more on the "inner" parts of the big chip; maybe just a little air out onto the pins, but... most of the heat is going to flow through the chip's package out into the leads, instead of trying to heat up the pins directly. Does that make sense? Is it right?

@mrsolderfix3996

Жыл бұрын

Hi . I occasionally get small parts surrounding the IC that's being removed melting as well so if I'm worried parts will shift I usually put a silver foil tape ( sticky backed ) over these parts protecting them from the heat so the solder on them won't melt. Some people use Kapton tape for this but heat will go through Kapton and the parts will still unsolder and potentially move. You are right , go round the edge to warm the area then concentrate on the centre . Hope that helps 👍

That was first class of work..., Sir....what is your microscope brand.. I'm planning to go for one. Thank you very much indeed.

These videos are super helpful!

@mrsolderfix3996

7 ай бұрын

Hi , thank you for your comment , it's very much appreciated . All I want to do is help a few people out with their soldering / desoldering issues , if I can then that's great . Thanks again , take care 👍

Very good. I'm personally not too worried about pads. As long as I keep the force to a minimum, to just be able to lift the component

@mrsolderfix3996

Жыл бұрын

Hi , thank you for watching the video, very much appreciated 👍

satsfying to watch !

@mrsolderfix3996

4 ай бұрын

Hi , thank you for watching the video and commenting , very much appreciated 👍

Some great tips here thank you I had issues with boards popcorning, I think my heat was too high with a low airflow, after watching your video

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment. Good luck with all your soldering projects in the future 👍

Great tutorial. Thanks.

@mrsolderfix3996

Жыл бұрын

Hi , thank you. I'm glad you enjoyed the video, hopefully it can help a few people out . Thanks again , take care 👍

Hello, I really enjoyed the video and the explanations. I am not a professional in the field and I wanted to please ask what is the reason for putting FLUX before heating with hot air or working with a soldering iron ? Thanks in advance

@mrsolderfix3996

8 ай бұрын

Hi , thank you for your question. Solder already has a thin core of flux inside it but as soon as it's heated it tends to burn away before the joint is fully formed . Adding a layer of external flux before soldering extends the flow time giving you a much better chance of a nicely shaped , flowed joint . If you ever have solder spikes and your struggling to get rid of them add flux , reflow and they will be gone . Hope that helps , thanks again 👍

@YL-mc9oz

8 ай бұрын

@@mrsolderfix3996 Thank you very much for the detailed and professional answer

@mrsolderfix3996

8 ай бұрын

Hi , no problem , all the best 👍

I did electronics as a kid back in the 90's, never had any trouble with through hole stuff. Professionally i moved to the stuff where something like 5g95NYY is your bread and butter. No i am returning to electronics and everything is SMT. Have to relearn everything. Also RoHS wasn't a thing back in the days. At first i thought i was going crazy. I knew that i had to apply more heat but esp. tarnished solder joints were an absolute p.i.t.a. So, thanks, much appreciated.

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. Hopefully you will enjoy returning to doing electronics and maybe my videos can help you a little . Good luck with all your projects , thanks again 👍

Very useful video Thanks

@mrsolderfix3996

9 ай бұрын

Hi , thank you for watching the video and commenting , much appreciated 👍

That's great! Thank You very much!!! Peace and good to You!

@mrsolderfix3996

10 ай бұрын

Hi , thank you for watching the video and commenting , much appreciated 👍

thanks for this great tutorial

@mrsolderfix3996

Жыл бұрын

Hi , thank you for supporting my channel , very much appreciated 👍

Great video! Thanks 👍. Question: What kind of tool do you use to see all these small parts? A microscope? If so, what kind?

thabk you very much for good the tutorial sir..

@mrsolderfix3996

Жыл бұрын

Hi , thank you for watching the video and for your comment. I'm glad you enjoyed the video , hopefully it can help a few people, take care 👍

great video sir. Thanks

@mrsolderfix3996

5 ай бұрын

Hi , thank you for watching the video and commenting , much appreciated 👍

Home made de-soldering braid, you get an upvote and sub. Excited to see what other goodies you have.

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your support, much appreciated. Hopefully you find some of my other videos of use . Thanks again , take care 👍

Excellent tutorial

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your support, very much appreciated 👍

Excellent work!

@mrsolderfix3996

9 ай бұрын

Hi , thank you for watching the video and commenting , very much appreciated 👍

Thanks for your vids, very helpful. I've just started soldering as a hobby in my spare time and finding tips and tricks to help me along. What do you use to wipe the flux off after you've wicked the pads?

@mrsolderfix3996

2 ай бұрын

Hi , thank you for watching the video and commenting , much appreciated . I've posted a complete video on my channel showing all the consumables I use for cleaning such as cleaning cloths , cleaning fluids and one special item , a hairdryer . This video may help you massively as this method I use is now adopted by many , many people I work with on a daily basis . Thanks again and good luck 👍

very good demo

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video, hopefully it can help a few people out with their soldering issues. Thanks again , take care 👍

thanks for this. i have some boards i have made mistakes on and need to redo

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment. I've posted a few rework videos on KZread now , hopefully some of the methods I've shown throughout these videos can help you out with your soldering reworks . Thanks again , good luck 👍

beautiful work!

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment, I'm glad you enjoyed the video . Hopefully it can help a few people out 👍

Great video coverage

@mrsolderfix3996

8 ай бұрын

Hi , thank you for your comment , much appreciated . I'm glad you enjoyed the video 👍

Hi, many thks for sharing your knowledge and best practices. How do you use hot air gun for Electrolytic capacitor. Does the plastic around them at the bottol get burn. Many thks again.

@mrsolderfix3996

4 ай бұрын

Hi , thank you for watching the video and commenting , very much appreciated . Within the next week I will be posting a video showing the 3 different ways I remove my Electrolytic Caps . Hot air is one of the ways so all your questions will be answered within this video . Hope it helps you . Thanks again , take care 👍

Magic Video!!!! Thank you!!!🙂

@mrsolderfix3996

Жыл бұрын

Hi , thank you for watching the video , much appreciated. I'm glad you enjoyed it and hopefully found it useful 👍

Thanks. Good tips.

@mrsolderfix3996

Ай бұрын

Hi , thank you for watching the video and commenting , very much appreciated 👍

First of all: Thank you for the wonderful desoldering tips! I wonder how you would extract an old- fashion port, like a DB9 or a Centronics port? It is usually fastened to the board with expanding prongs and soldered to the holed pad in an expanded state.

@mrsolderfix3996

Жыл бұрын

Hi , thank you for your comment. Hopefully Im thinking of the right connector that you mention DB9. I've removed many connectors with expanding prongs at each end . The first thing I do is on the top side of the connector I cut through the prong pin at each end , this enables you to then turn the board over and simply heat up the prongs and easily lift them out of the holes . Then clean out these holes with solder braid or a solder sucker . That's stage one , I never try and pull the prongs back through the hole the way they went in , you will destroy the barrels. You can then either heat all the small connector pins up together with a heat gun and drop out or again cut them on the topside , pull them out one by one then again wick out . Like I say I hope I'm thinking of the connector you asked about . Good luck , take care 👍

@esspe2

Жыл бұрын

For tru-holes, thre are also tools with tubes like syringe needles that you put on each pin while turning when you heat the solder. The solder doesn't stick, so you end up with a pin separated from its solder. Repeat for each pin, and your connector is free. Never seen a video on this technique though.

@LarixusSnydes

Жыл бұрын

@@esspe2 Ah, yes, I think I actually have a set of those from China in a rather flimsy plastic case. I forgot that I had them, thank you for reminding me.

Proper Wow moments in there Sir :)

@mrsolderfix3996

3 ай бұрын

Hi , thank you for watching the video and commenting , very much appreciated 👍