This is one of the most thorough and understandable soldering tutorials I've ever seen.

@brylner

9 ай бұрын

Totally agree, very good!👍👍👍

@brylner

9 ай бұрын

Very clear and informative, thank you!👍👍👍

Here is a good tip. When soldering any pot, turn the potentiometer's shaft all the way to the OFF position (fully CW or CCW). By doing so before soldering you protect the fragile carbon resistor strip from damage from high heat/over-heating. If by chance there is damage it will be at the extreme travel of the wiper-arm/carbon strip. Basically, if it gets damaged better to have the damage occur at the extreme ends instead of in the middle of the operational area.

Holy smokes. I never had a 15 minute tutorial go so fast. Thanks

Just saved me $80 on my Ibanez SDGR bass. Plus however much it would’ve cost me to do any other time I needed this one wire resoldered. A like and a sub was a negligible price to pay.

@MrLovesToCrankUp

4 ай бұрын

Got it first try too 🎉

I'm doing the wiring on my first build and this video was incredibly helpful to me. Thank you so much! No other video went into the details that aren't very intuitive to me as well as this one did.

Excellent tutorial with great macro photography. Thanks.

Thank you. This has been the best video on soldering for guitars that I have ever seen on KZread. Top Notch!

Your video helped me fix my bass on my own and I'm very grateful for the time you spent putting this together.

@derrickrussell8933

5 ай бұрын

I'm ordering a soldering iron now. I'm excited to be able to play my bass again.

I've soldered, many times. Installed a bunch of pickups. However, I didn't realize quite how terrible/half assed my approach was. That is, until I stumbled on this gem of a video. Thanks dude. Much appreciated 🤌🏻🙏🏻🤘🏻

This is such a great instructional for soldering. Between the closeups and detailed instruction (that’s lacking in every other instructional I’ve seen), this is, by far, the best.

Isopropyl alcohol also assists at the end to remove any residual flux and leave a shiny solder finish result. Thanks again for your video

Excellent. Thank you.

I have watched a fair few soldering tutorials on guitar soldering and this is perfect, the best, clear instructions and most importantly very clear and close up camera work. Well done.

I really wish this video had been available all the times I soldered new pickups in. Sometimes it worked, sometimes it didn't. The only consistent thing about my soldering work was the white-hot rage I was filled with by the end.

Love the wood jig

Thanks for the help! Loved the recap at the end!

Excellent video. Thank you!

Amazing instructions. Thank you!

This helped a lot, thanks!

Thank you for putting this together. It is so helpful

Excellent. Thank you!

Wow, EXCELLENT tutorial!

Great video! Very helpful stuff. Thanks so much

Excellent tutorial... thank you

Very clear instructions and explanations…many thanks

Very good and helpful tips. Thank you

Fantastic. Such a well done tutorial. Thank you!

Great Video just what I was looking for -Thank you!

Absolutely superb video! Thank-you!

That was a great instructional video,thank you for sharing with all of us

Great instructions.👍

Nicely presented and tips well explained. 50 years in the electronic industry so a qualified comment! 5 years ago upgraded from a Weller WCPT station to a hakko station and watched the online PACE tutorials. Changed my methods and quality results. Always learning. Well done

Excellent video! very useful closeups and great narration. thank you!

Very neat work. Well done sir.

Great tutorial Daniel, Thank you

Very clear instructions. Very good! Thank you

Very good tutorial. Nicely explained

Thank you, an in depth explanation.

Fantastic video, thank you!

THANKS! Appreciated your expertise.

Thanks man really good explainations

You a Great teacher 👍😊 thank you

SUPER-helpful. Thank you 👍👏

Thanks for this very informative video!

Exactly what I needed! Thank you!!

Very good presentation. Nice job, thanks.

One additional "trick": when soldering the ground to pots take care to keep the solder blob away from interesting lettering, you might want to be able to read the value easily later when repairing it...

@Ded4spaghettes

6 ай бұрын

It’s a good thing the value is on the opposite side of the pots, then…

Great tips and information 👌

Well explained - Thank you

This video is the best! Thanks for the help!!

Great video, excellent tips i shall use on my next project

Thank you. Great tips!!

Great info and great camera work.... Thanks!

Fantastic video, thank you so much!!

I love your style of your lesson here. Great tutorial. I am glad I found your channel. Thank you!

Best explanation I've seen! thank you

This video was very helpful. Cleared all my doubts. Thanks a lot.

I love you mate. Really, what a gem of a video. Just an observation, do not tangle the 2 wires @13:00. I've heard it's of no use and makes it more difficult to undo them if needed.

Awesome video, thanks!

Great video, thank you!

Great video and very helpful close-up shots! Looking forward to my first attempts, your video and instructions give me confidence! Thanks!

Great camera work!! It really helped cement the info 🙏

Best soldering tutorial yet! Ty for sharing with us

Love the close up shots to see the action of the molten solder within the wire. Very cool, thank you.

Thanks for your suggestions. it is very useful and important to see how you work 🤩

Thank you! I really enjoyed the thorough explanation and excellent close up camera work.

best tutorial i’ve found on soldering basics, thank you!

Another tip is to score or scuff the back of the pot with some sandpaper to help the solder stick to it

Great in-depth tutorial of how to get the perfect soldering tips, many thanks 👍🤘

Very detailed and great close-up shots to actually tell what you're doing! Thank you so much for this tutorial! 👍

Sir your teaching wounderfull thankyou. 😎

That´s a really nice tutorial ! Cheers

Earned a sub.

Amazing and thorough video. Great instruction and camera work. Kudos to you and thank you!!

Nice job on explaining how solder wire. This is very informative.

Thanks Much! The information presented here will surely clean up my next project!

Thank you for the detailed close-ups for us near sighted folks,helped a lot!🗽🛸

Thank you for this, very very useful tips and information. Saved me alot of hours and headache. Cheers!

Very nice and professional work. Best video I’ve saw on KZread on this so far. NICE JOB!!!!!!’

I really like this video and will be applying your techniques. Good camera work demonstrating your techniques. Thank you sir.

This helped a lot, thanks Dude!

Great stuff

Fantastic thanks!

Great, learned something here. thx!

Ty for the tutorial 🎉

Best video on soldering. Great camera angels

Best video on soldering for guitar electronics by far!!👍👌

Just found your channel & tutorial..... Excellent video, explanations & camera work. Well Done and greatly appreciated!!.... and you just gained a new subscriber with notifications added. Looking forward to searching your channel for more informative and concise "How To" video's of yours. Thank you for your efforts and sharing your experience with all of us.

This is really helpfull!! Thank You :)

Extra flux always helps especially with rework of used components and larger surfaces. Fibre pen abrasion to remove corrosion can also assist solder to flow.

superb video. very clear and easy to understand. was unhappy with my soldering so was looking for ways to improve....perfect video for this. thanks so much

This is the best how-to guide on soldering I’ve seen! Thank you for sharing. Liked and subscribed!

Thanks for this...I'm a beginner and this was exactly what I was looking for!!

very nice, great!

Brilliant - thanks!

Absolutely the best tutorial for soldering guitar wires.

Cool I need this video Your info is asome

Excellent video, thank you :)

@UnquendorGuitars

Жыл бұрын

Hi Moniker Subriquet, You're welcome.

Very informative thank you

@UnquendorGuitars

Жыл бұрын

Hi John, Thank you very much.

The best and easiest to understand instruction video for soldering guitar electronics ....many thanks....loved it 👍