Great video, cheers for the tips mate!

Great video mate, good tips to save us making ourselves look even less competent.

@THE-AIDEN-PROJECT

6 ай бұрын

Glad you enjoyed it 🙂

Hi mate’I’ve got no idea why you don’t get more likes from your followers it only takes a second and it helps you out . come on guys give the man a thumbs up after all his content is completely free and entertaining.👍🏻👍🏻

@THE-AIDEN-PROJECT

6 ай бұрын

Cheers dude

@hunter-yy3ob

6 ай бұрын

@@THE-AIDEN-PROJECT You’re more than welcome mate keep the content coming.👍🏻

Good sound advice. I feel a song coming on: 'You've got to know when to hold 'em Know when to fold 'em Know when to walk away And know when to run' PS I even clicked the thumbs up icon three times....that's my 30% done! 👍

@THE-AIDEN-PROJECT

6 ай бұрын

😆

Ah man, I literally have this exact same video recorded, half edited, and about to be published 😂😂😂 maybe I'll delay it for a few weeks!!! Good job 👌

@THE-AIDEN-PROJECT

6 ай бұрын

Haha that'll be an interesting watch! Are you aiming for another 10/10 😂

Not only a "like", but a "comment" as well from me. Excellent video!

@THE-AIDEN-PROJECT

2 ай бұрын

Much appreciated!

Thanks for the tutorial, been meaning to do this for ages! Question: why don't you also put silicone on the inside?

@THE-AIDEN-PROJECT

Ай бұрын

Any moisture that gets in either the side tracks or underneath the glass will get trapped instead of being able to drain into the tray. It'll end up going mouldy as a result with either black mould or pink mould

Learning to know when to call it quits to save f*cking up even more is a #1 top tip. Something I've learnt a lot this year, and you're the only one who's going to know it's not a 'perfect' job anyway. Good how to video anyway, but get back to the house 😜

@THE-AIDEN-PROJECT

6 ай бұрын

I've ended up having to redo a whole bath once 🤦 The house isn't going anywhere 😅

Hi. Great video, thanks.....Which Dow silicone did you use? All the ones I saw say it's medium / high modulus.

@THE-AIDEN-PROJECT

25 күн бұрын

dow 785+ sanitary sealant clear

@micksmith8839

25 күн бұрын

​​@@THE-AIDEN-PROJECT thanks, it's not clear in any of the sites I checked what the modulus levels are.

@THE-AIDEN-PROJECT

25 күн бұрын

@@micksmith8839 yeah I know, I had a quick look too but as I read it on camera I trust myself...I think😆 I'm sure they have this one in Wickes so you could always just go and pick it up off the shelf and check

If you need to get rid of silicone, grab adhesive or anything like that, try multisolve from ct1. It removes stuff even where you can get in as it is a spray. Another use for this application is to spray it after above the surface of the bead you've done to give it that smooth, shinny sleak bead you've done. Banging product. (Ps, I am liking that vid so i am in that 30% you spoke of) 😊

@THE-AIDEN-PROJECT

6 ай бұрын

Ah I didn't know there was a spray version, that sounds useful!

Thanks, for the first time I've managed to do some siliconing properly. A couple of things to add. I didn't have your first tool, so I cut an old credit card at the corners in a similar fashion to your tool, and it worked great. First job was with white silicone, and it looks fab (even the wife thinks so 😛 ). Second job was with clear silicone on glass shower wall - it was more tricky, as I couldn't actually see properly how it was going on, so I ended up with too much, and when I tried to remove the excess, it smeared a bit on the glass. Managed to tidy up ok with the side of the credit card, but any tips?

@THE-AIDEN-PROJECT

Ай бұрын

I'm not sure what tool you mean 😆 the removal tools or the smoothing tool? It sounds like you've done pretty well though and it sounds like you already know where you could improve and that's just not putting down too much silicone initially. It's hard to judge though, especially if you only do it once in a blue moon

I fancy this guy, he is so handsome. Love your videos. xx

@THE-AIDEN-PROJECT

6 ай бұрын

Thanking you ☺️

Nice video. I'm planning a video using silicone and washing up liquid.😂 But for a different purpose.

@THE-AIDEN-PROJECT

6 ай бұрын

Oh no not washing up liquid! 🫣 I suppose it's only ok if you're doing some kind of casting 😉

Why cant we use fairy liquid? It allows the silicone to nicely get into tiny gaps from my experience unless im missing the point.

@THE-AIDEN-PROJECT

2 ай бұрын

kzread.info/dash/bejne/nauc2dSOqa2qpM4.htmlsi=rZ_fJV1BpRxlk036

I hate doing silicon or painter's caulk. like you warned, I dick around with it too much. What happened to your electric Ryobi?

@THE-AIDEN-PROJECT

6 ай бұрын

The electric gun still works but I'm missing a little bit which means some of the silicone comes out the back side 😩 plus not everyone has an electric one so I wanted to show how anyone can do this little job 😉

Pukka Job.😀👍

@THE-AIDEN-PROJECT

6 ай бұрын

Thanks dude

interested to know why fairy is so bad, seems to have worked for me!

@THE-AIDEN-PROJECT

5 ай бұрын

I'll do a video at some point 😉

Tip: I use WD40 to get rid of the residual mastic after scraping off as much as I can. It melts the silicon and leaves a clean surface. However you need to clean off the WD40 off with white spirits or similar because the new silicon will not seal to the WD40 surface.

@davewright9312

6 ай бұрын

Don't use white spirit as that to leaves a residue...methylated spirit is better

Why no silicone on the inside of the shower? If you only do it on the outside, the water can get into the cracks and space between the shower glass/wall and the wall or floor of the shower along with dirt and debris and start mould? Isn't it better to stop the water from getting out of the shower at all? I'm not saying you're wrong or anything, I'm just curious, here in Sweden we seem to always have silicone on the inside, as far I've seen it at least.

@normanboyes4983

6 ай бұрын

The theory is that the shower base slopes towards the drain, by sealing on the outside any water will accumulate and drain out, whereas if you seal on the inside any area of seal failure will allow water in and it cannot get out.

@Oli_Hudson

6 ай бұрын

I would say think there are pro and cons to both, so best to go with your instinct!

@THE-AIDEN-PROJECT

6 ай бұрын

Norman hit the nail on the head here. All the manufacturers recommend just doing the outside. There's more chance of trapping water and mould growth, especially if the silicone starts to fail as it doesn't last forever 😅

@normanboyes4983

6 ай бұрын

@@Oli_Hudson Yes of course, instinct is much better than following the design intent.

@ChrisFredriksson

6 ай бұрын

​ @THE-AIDEN-PROJECT ​ @normanboyes4983 Aaah.. of course! I didn't think of that.. then Swedes are dumb 😂😋 Of course there are pros and cons, but I didn't even think about the slope, that is a given. Thanks all of you!

My other half, she did fall into this 🤔🤣

What do you mean don't go over it again and fuck it up? That's the most inportant part! That's at least to 2 tube job and a double swear! :)

@THE-AIDEN-PROJECT

6 ай бұрын

😂🤣 We've all done it

Why do you not seal inside the shower? Mould?

@THE-AIDEN-PROJECT

6 ай бұрын

It can trap water under or inside the frame where it can't drain away, that will eventually cause mould 🙈

How to earn brownie points from the other half.

@THE-AIDEN-PROJECT

6 ай бұрын

Leave it long enough, so when you eventually do it, it means more right? 😂

@JohnnyMotel99

6 ай бұрын

@@THE-AIDEN-PROJECT great strategy, just don't let on to the other1/2!

I could live with those “imperfections”. I’d need a magnifying glass to see them. I’ve had really good results with the soapy spray method when siliconing. Better by a good margin than tape or raw tooling. I’m interested in your view(s) on the downside. Also, not giving a thumbs up to a video one has chosen to watch to near the end is just fkn rude. You don’t have to agree a point to appreciate an effort made.

@THE-AIDEN-PROJECT

6 ай бұрын

Thanks for the thumbs up mate 😁 I'll do a video on the washing up liquid thing one day 😉