How to setup and use another ford key if your is damaged
Is your ford key damaged? In this video I show you how I setup up another ford key to work with my car because mine just stopped working even tho I changed the battery. Anyway I hope this helps you guys give me a 'like' if it helped. Take care out there everyone!
Пікірлер: 212
Hi. I know this is an old video but I’m hoping you’ll see this comment. Thank you for posting this. You’ve just saved me £130 at Timpsons. My key fob became faulty on my 09 connect. I tried replacing the battery. No better. So I bought a replacement key from eBay for £10. Followed the fob programming from the van manual. The new key would then unlock the doors but not start the van. A red light on the dash would flash. Was about to get my pants pulled down by timpsons. Then found your video. Five minutes to dig out the chip and now my new £10 key works a treat. Thank you. Awesome video.
@HUBBY000001
Жыл бұрын
Hi there wayne!! 👋 Yes I have seen your comment!! 👋 I'm glad this video is still helping people!! 😃 £130 is a lot of money! Thanks again for your time to leave a comment, you take care out there bud!
Just saved me a hell of a lot of money....bought a second hand key fob for £3, after my ford focus key fob mysteriously died after changing the battery...so been having to manually lock and unlock for the past few months. Followed your video and I have a working key again! Thankyou so much!
This worked a treat thanks for posting. I can confirm you *can* just swap the back together with Transponder chip (l could’nt remove my chip as it was glued in) and snap together with new/donor buttons section then just push your old key onto it. The programming took some attempts but works l couldn’t be happier!
Thanks sorted my daughters car Thanks again James
I have a Ford Ka 2003. Remote was suddenly not working anymore. Tried the 4 times on and off. No sound, but the red light in the clock stayed red for some seconds and after that the remote works fine again! Thank you for the video!
your a star bro...just saved me £90 ....got my replacement fob from the scrappy £3 out of a bucket of fobs .... did as you suggested... took a few goes but bong....press door lock button ....bong .... job done .... this works....thanks for posting
@HUBBY000001
7 жыл бұрын
lee man EXCELLENT!!! I'm glad this helped you mate. thanks for your comment hope I got your thumbs up 🖒😉
@100leeman
7 жыл бұрын
thumbs up defo'
fella you are a legend. my key was doing my head in but thanks to your vid its good now.
@HUBBY000001
7 жыл бұрын
Stu Waters mate thanks for your comment!! :D well done mate!! I'm glad my video helped you!!
Brilliant fix worked first time - saved cost of a new key. Many thanks.
@Afaqtube
4 жыл бұрын
kzread.info/dash/bejne/ZHtoqKR-nNivaNo.html
Absolutely Fantastic!!. IT WORKED for me too.Thanks very much for your help and very thorough instructions. Your tip saved me some £££. Top Man!.
Top man! thanks for the video. I bought a replacement key case from ebay but afterward its didn't start but remote lock works. After watching your video, I realise I didn't take the infrared out.
Thanks, this worked for me, I had recalibrated the key no problem so that it would lock and unlock the car but it would not start, I swapped over the glass thing and that did it, key now working fine. Bought key on Amazon for £11.00. I have been without a fully working key for months if only I had known it was that easy.
What an absolute legend 👍🏻👌🏻 my buttons have never worked on my key I’ve tried new batteries then played around with the contacts to the buttons and I gave up in the end thinking the key was knackered and just used it manually to lock and unlock and it’s the only one I got when I bought my van . Just followed your advice and now it works remotely 🤘🏻🙏🏻 thank you kind sir 👍🏻
My fiesta old cheap 2005 car, didn't even think of paying for a new fob, I'll try this though, sounds like an easy cheap solution, cheers
Thanks, bought a key off e bay, swapped the transponder re-used my buttons, all working again, cheers
Omg just watched ur video n fixed my problem THANKYOU so much for sharing ur a legend 160 quoted n done it for 2.50 thank you 😊
@magstatum6380
4 жыл бұрын
STORMY TEMPEST Yh 56 plate
thats worked , thanks alot, i didnt even notice the chip , i was like wtf is happening , immobilizer keeps kicking in. now ive moved the chip to a new fob, it works.
Massive help, thanks so much 👍🏼
I suffering from last 6months for this issue unfortunately got your video bro., and i did as u said after got clear thanks again for your valide suggestion bro Keep roking 👍🙏
ty bro for posting this video it helped me a lot and saved my money i order via ebay complete key(need to be cut) swap the cutted part which goes in the ignition and swaped the chip you saved me 50€ for cutting the key ty!
Excellent video. Very informative and well made
@HUBBY000001
7 жыл бұрын
Steven Mason that's mate don't forget to subcribe!!
Great Vid - spot on. Worked a treat. Thanks very much.
Amazing mate, worked an absolute charm. Legend
Brilliant vid, thank you. Footnote: you can get a replacement fob very cheap online
Just brought a focus and one key didnt work... i fitted another battery and no luck.. i used your tip to calibrate and all working fine now!! Thankyou for sharing your knowledge!
Thanks mate worked first time 😊
Fantastic, you are a wizard, it works like a charm, thank you so much
Tried it and it works!!! Thank you very much.
@HUBBY000001
7 жыл бұрын
Hey There!! Thanks for your comment im glad this helped you. Its a great fix!! :)
Mate saved me £££s in mine, bought another blank key for £5 off eBay for my fiesta, programmed it and it locked but wouldn't start. Found your video and now it runs perfect, thanks again 😊
@HUBBY000001
5 жыл бұрын
cheers mate for your comment!
Nice one 👍 I didn’t need to change anything but reprogrammed the key and works fine now
Thanks a lot mate, saved me some money and you explained it very well !!
@HUBBY000001
7 жыл бұрын
cncsetter thanks for my comment mate I'm glad this video helped you!! don't forget to like and subcribe!! ;)
@Afaqtube
4 жыл бұрын
kzread.info/dash/bejne/ZHtoqKR-nNivaNo.html
Thank you mate for the tutorial. My key works again :)
@HUBBY000001
5 жыл бұрын
That good mate thanks for your comment!
You a legend mate! Muchas gracias tronco!
i think the glass bit is called a transponder, but I have been known to be wong ! great vid by the way, keep em coming.......
Thanks for the video man, I need a new key for my ford so gonna try this tomorrow. As I have a similar problem with the unlock button being temperamental and sometimes it works and other times it doesn't
Thank you my friend about the information. Yes it works my key again!
@HUBBY000001
5 жыл бұрын
wicked!!
Saved me a trip to ford cheers for the video about battery change for ford fiesta 👌
Top lad , saved me some dollar this did..the scrap man didn’t find me amusing though!! When you said he won’t mind you taking a key , obviously spare engines don’t fall into the he won’t care category😂😂kidding
Well explained, good vid, cheers bud.
@HUBBY000001
5 жыл бұрын
Thanks matey!
Thanks for helping me out, it worked fine.
Thanks you! Great video. Well done
@Afaqtube
4 жыл бұрын
kzread.info/dash/bejne/ZHtoqKR-nNivaNo.html
Mate I tell you how you helped me after ages of trying .... I had the battery the wrong way round... thank you
Thanks for this info. I did not know before!! Thumbs up for this video ;-)
@HUBBY000001
7 жыл бұрын
RaiSchwan thanks for your comment I hope this helped you :)
Nice one fella..worked a treat
Top Tip mate....this just saved me a few ££££££'s
it works did it toda y ur a genius thanks
nice job buddy thanks for sharing
thank you a lot bro, very helpfull for me!
@HUBBY000001
5 жыл бұрын
Thanks matey!
It's Called A Transponder Chip. Fine for all pre 2007. You can not do this for example with the blue key like on mk7 Transit. However this is a handy video that can save you pounds. You do not need to steal a key as breakers have tons & will only charge maybe a fiver.
@HUBBY000001
5 жыл бұрын
Thanks bud for correcting me. take it easy
You r the man bro great vid
@HUBBY000001
5 жыл бұрын
thanks mate! glad to help
That’s so nice bro. Go on
You are a savior 🙏
I know this is an old video (I'm posting on 31st Jan 2023), but this is the information I needed. My remote stopped working after a vattery change and just won't reprogram. The key still starts the car. I obtained a new key, which is now able to unlock the central locking but won't start the car. So your video shows how I can fix it. Thanks.
good stuff worked on my focus 2005
Brilliant, my remote didn't work properly, got another mondeo for bangers, with a good working remote, did just like in the video, and there.. I got a good remote for my daily.. thnx mate!
@HUBBY000001
5 жыл бұрын
no worries mate take it easy
Just got a key off eBay, the circuit board hasn't got all that the old one has on it, I've done what you said, replaced old chip thing in new key, (new key didn't come with nothing) when you turn the key on and off, do you have to do it slowly, or fast . I can't get mine to work 🙁
Cheers. This worked for me.
Thank you for the video, but there are a few issues, not least that the key has no IR component at all. The glass transponder is an RFID chip that is linked to your ECU by a collar that wraps around the ignition barrel and needs to be in very close proximity to work. Different transponders can be programmed in, but that requires a special tool. The wireless circuit on the fob is linked to the 'Comfort Unit' that controls the central locking/doors etc. This can be programmed using the ignition sequence fairly easily. That is 433 mhz, again, not IR, which is why it can work in your pocket. The car doesnt need a wireless fob to run, it does need the RFID chip which is the immobiliser linked with that specific ECU.
@antonioPaulino
2 жыл бұрын
Also misleading title, the key is not replaced it's the fob (remote)
@stormytempest6521
2 жыл бұрын
@@antonioPaulino YES technically speaking, but why get all technical? Just watch the video and listen, HIS advice worked perfectly for me and alot of other people, His advice can save you alot of money, it did for me! One hiccup, make sure you scrapyard key buttons on fob feel tight on using, loose buttons will fail when programming new key in ( badly worn) regards.
@johnwilson1935
7 ай бұрын
So hes bullshitting then Matt?
cheers bruv it worked for me
Hello sir, I want to make 2nd key bcs I lost the 2nd. So I purchased new remote 4rm Amazon. Remote is working new key is made by key maker. It opens the door with remote nd wt key but how to start the engine.. Does this remote comes wt the chip...? Waiting for ur rply. Thxs & Rgds
God bless you! Mine starter working after this
hi, GREAT VIDEO. what about if the metal part is old and the car wont start? this could be the solution? THANKS!!
Thanks dude! Greetings
mine dont have info red it has a chip can i still do the same cheers
Thanks solved my problem
@HUBBY000001
5 жыл бұрын
Thanks. Well done
Is it ok to use a ford key that matches mine apart from the shank on donor key is flat where mine is round ?, great vid ;)
Yes mate ford focus no problem nice one saved me some dosh 😊
@HUBBY000001
5 жыл бұрын
What i like to hear well done glad this helped you!
ive had this issue with ford mustangs for yrs. from 96 to the 2009 i have now, ive had 3 the top part ends up coming loose an out of 4 mustangs its happen on all or was already like this from the time i got it an i was lucky at times an was able to catch it an didnt lose the metal part of the key or the black plastic part but ive also not been so lucky an ended up losing the key an only have the black plastic part left on my keyring an in that case i had to hold the chip section up next to the ignition as i started the car with the original door and truck key, if u just used the door an trunk key it would start an then shut back off with the anti theft light flashing. just picked up a 2009 mustang gt about a week ago an it was the same way as the one i lost the metal part of the key with so they had the black plastic chip tapped to the door an trunk key, it works fine but its a sticky mess an its even worse for wear then the 96 gt i had cause the loop that u would attach the black plastic part to a key ring had been ripped off an this seems to be really common but i own 3d printers now when i didnt the last time i dealt with something like this so ive come up with a 3d model quick that will hold it all together as one piece an keep from having to worry about losing any of it but its what u would imagine it would be, really really thick cause its basiclly stacking 2 keys ontop of each other so id like to get my hands on one that i could start cutting away the plastic to see if i could at least get it back down to the original thickness and if i can manage that ill be extremely happy. but one of the reasons ive always had to do it this way was cause i was never able to get a key cut an programmed cause they always told me the car was to old to have it done so i was pretty much told to figure it out. i was always lucky enough that i could manage to keep the cars going but if this happen to someone who wasn't someone who dealt with cars alot they would be stranded. for anyone who has this issue ive had countless times an has 3d printers, www.thingiverse.com/thing:6145698 hers what i came up with to just to keep the parts together an usable like a normal key, the thinner u can get it the better just sand away the material thats not needed or reach out an i'll make the changes to the model itself if u manage to get it really thin plus id like to know how it goes for anyone who trys to remove as much plastic as they can from the chip side.
Think you worked for me 😎
Any ideas how to switch to the flip key like ya said?
How about taking the key side that contains the battery and infrared chip and couple it with the other side gotten from the junk yard that the buttons?
really good video mate. just for info. the immobiliser is radio frequency. not infrared
@stormytempest3907
2 жыл бұрын
Spot on.
Try just swapping the battery side with the chip to the replacement no need to dig the chip out .
@Furball6433
Жыл бұрын
Does this work? Really need help
You are just awesome...
What if you popped a new battery in the fob from the get go? No need to go nicking keys from a breakers .
Nice fix thanks
Thank you I tried your trick the car beeps push button on the remote with nothing happened no other beeps from car when i press remote button what can be the problem in foucs 2006 please if you can help
Thank u I will try it xx
what if you just put together half of the original key with the IR sensor and the other half of the donor key with the buttons? I presume the radio sender for central locking is in the half with the buttons, not the half with the battery? Should work without having to get the IR sensor out?
@prusak26
6 жыл бұрын
just done it, works!
Does The 2007 Ford transit have The chip in The plastic?
Mondeo key, can you program the inferred on the key.
zammo your a legend thanks for the tip ...ps remmember to say no mate !!!
Nice video mate :) Question regarding this key thing: how can i disable the "open boot" key, on random occasions it will just unlock the boot - usually with the key in my pocket when i do something (bend etc)?
@samsonaaron9340
2 жыл бұрын
Instablaster.
Hi mate... Do you hold the button in while its reprogramming or just give it a quick press? I tried it several times and got the first chime but nothing happened when i pressed the button. It wouldn't code it for me. Peace
@stormytempest6521
2 жыл бұрын
Hi, can happen, watch video again, take your time, some second hand keys can fail no matter how many times you try! Footnote... get a scrappy key with tight buttons on fob, and it looks decent! regards.
will it work on a MK 7 Transit key
Can you help me please,,??? I programmed a new remote key fob ( ford modeo MK3),, It worked ,,But only as it concerns the remote key,, What about the ignition.?? How can i program the immobilizer to the new key.,??Thanks...
@kayakingdj
5 жыл бұрын
Did you take the chip/transponder/IR/RF thing out of the old one and put it in the new one?
Hi HUBBY000001, I've done everything you said but my car will not give me a bong, does not make any noise what so ever. ?? and the buttons still don't work ?? but my car still starts ok. car MK 2 Modeo.
I think that you are wrong about the infra red (IR). I think that it is radio frequency (RF).
@theRPGmaster
7 жыл бұрын
Yes, 90% of car keys I've seen do NOT use IR.
@dansolo9978
7 жыл бұрын
Yes - (RFID) Chip Great info tho, nice to know brother...
@2010GRABOWSKI
6 жыл бұрын
It's definitely not infrared
@HUBBY000001
5 жыл бұрын
YES you are so right sorry guys!! My Bad
I just bought a 54 plate fiesta. I think at one point in its life it had a replacement drivers door. There is s key with buttons on that only open the drivers door and another normal key without buttons that opens the boot door and starts the engine. The buttons on the button key do not work at all what should I do?? I have to lock the passenger door from the inside because of the central locking not working
@itskushbruh162
7 жыл бұрын
Maybe I need to buy a remote key from amazon and then get it cut to the same size as my key that starts the engine and then program the new remote key?
@emirgogalic9380
7 жыл бұрын
try pressing the unlock button twice in a row fast, some locks are programmed to unlock only drivers side when the key is pressed only once
I have a 57 plate focus with the door opening button not working. Brought a new fob and just used the button top half from the new fob and the bottom half of the old fob with the battery in and it works fine. You have to code the door locks by turning on and off 4 times in 6sec then theres a beeping noise and then pressing any button. Then there`s no reason to have to program the transponder (BOTTOM HALF) as you have used your old one and saves having to pay Ford to program it.
@stormytempest3907
2 жыл бұрын
Hi, you are nearly right, it's the P.C.B. board on new key that has to be programmed in with car alarm system using original chip, peace.
Thank You
muito bom o vídeo parabéns. .abraços
Thanx a lot my friend. You saved me a lot of money. Let´s have a bear if you ever come to Germany....
I have focus st 2007 2.5 petrol , can I use same method to program my new key ? Thx
@Eonednb
6 жыл бұрын
Damian Kupis no this only works with the old school 3 button key like shown.
hiya chap, you sorted me out when i had a problem with my fob last year, my misses dropped my keys today and now it wont open or lock my f focus, should i try this again
@stormytempest3907
4 жыл бұрын
Hi, I would, check battery in right, then check glass transponder ( chip ) can't check PCB board, if chip ok try to calbrate up, as in video, if it won't work get another key from scrapyard and follow video, you'll be fine! regards... if chip cracked ( I doubt it ) may cause fob to fail.
@fishypie
4 жыл бұрын
@@stormytempest3907 iv orderd a new key fob. i dont get it till may so ill let you no
@fishypie
4 жыл бұрын
@@stormytempest3907 got my key from china swopped the chip, worked great 6 £
cheers mate, it works saved me so much time and cash. thanks again
@HUBBY000001
5 жыл бұрын
no worries buddy glad to help
2.20 someone get him an ice cream!!!! good video though
Do you think this would work for swapping out an ECU rather than changing barrels and all that as well. I need to swap my engine out but need the ecu swapping out.
Very imformative
Hi mate, I did everything exactly as you suggested but still, no joy. I was so sure that your great vid would finally solve my remote problem but, sadly it's still not working. I got as far as the first beep but nothing more.
@MrEvilWasp
5 жыл бұрын
Yeah that's all that happened with me. Put a new battery in and still only got as far as the first beep. Did you manage to get it working? Peace
@stormytempest3907
2 жыл бұрын
@@MrEvilWasp can happen, P.C.B. board worn, bin it! Had similar problem, peace.
Super cool