Cheap Windows 10/11 Office/ Steam & Gaming Keys available from affiliate links: www.premiumcdkeys.com/mikesunboxing Discount code: MIKESUNBOXING 7.5% Off

I have never built a Pc on a test bench I guess I've been lucky and everyone I have built has worked inside the case

@oceanlawnlove8109

11 күн бұрын

Test bench is so pointless. You're just building your PC twice. If you do it right the first time, you're good. Just don't duck up, it's not that difficult. Completely building it and then having to take it apart just to build it into the case is so goofy. It's not like when you do that some cables can't disconnect etc. it's just an extra step that can potentially even cause issues in a working build

@JohnDoe-bz4yl

11 күн бұрын

@@oceanlawnlove8109 That's why I have always built inside the case

@mikesunboxing

10 күн бұрын

do whatever works for you, but i would try getting a post before putting everything in and cable managing. when you build as many pc's as i do, every now and then your get a part that doesn't work, so prior testing helps to lessen the frustration

@JohnDoe-bz4yl

10 күн бұрын

@@mikesunboxing With the amount of PC's you build I would do the same!

Thanks Mike and Lady Kath for the great review. I see you are using your favorite graphics card Mike. The awesome GT 1030. 😄 I have an ASUS GT 1030. Use it mainly for troubleshooting. Great budget card for basic builds on a tight budget. Thanks for sharing guys. Take care. Cheers

@mikesunboxing

15 күн бұрын

cheers Rick, weird stuff happening with this card from time to time. probably needs a good clean on the pcie slot

@uglybob7505

11 күн бұрын

@@mikesunboxing It was probably the PCI slot spitting it out thinking "Whats this crap hes making me hold ???"

@mikesunboxing

11 күн бұрын

@@uglybob7505 haha yeah you might be on to something there

Awesome video, thanks for sharing you lovely people 🙂

@mikesunboxing

19 күн бұрын

Our pleasure!

Doing a great job, I have been Subed after I seen you in the chat at Carey Holzman's channel. I am about to build again for the first in many years. A lot has changed and it's great to be able to see the hands on and ins and outs of PC builds.

@mikesunboxing

10 күн бұрын

Thanks for the sub! and hope you next build goes well. If not we are here to help

Thanks Mike. Loved this video.. Its so relaxing to watch all parts come together.( Used your Links as well .. guys remember to use it ) 🎉

@mikesunboxing

10 күн бұрын

Awesome thank you!

Awesome tips and tricks, Mike! I sure wish I had this kind of advice when I built my first PC. Highly recommended for anyone building a gaming PC.

@mikesunboxing

10 күн бұрын

yeah me to, we had to learn the hard way in the pre internet era

I love the thrill of putting my new Pc together and firing it up for the first time seeing that beautiful post screen 💪😇😉🥳🥳

@mikesunboxing

10 күн бұрын

yeah that is something i think we all look forward to

Lovely job Mike, extremely helpful, well explained all round, thank's.

@mikesunboxing

16 күн бұрын

Glad you enjoyed it

Brilliant video; thank you.

@mikesunboxing

11 күн бұрын

Thanks that is very kind of you to say

Foreshadowing 😉 nice touch 😏

@mikesunboxing

16 күн бұрын

cheers , and glad you are home safe and well

Excellent review on safely building and bios updating. Years ago this wud be fraught with worry putting it together but since following your channel its been confidence boosting every tutorial. Thank you for always being thorough and showing how to! Have great weekend Mike and Kath 🐈👍

@mikesunboxing

10 күн бұрын

Glad you liked it! we try and make these videos accessible and not overly techincal if it isn't needed. keep it simple is the best way

Always advise my friends to do this first. Finally The Video! Thanks Mike!

@mikesunboxing

10 күн бұрын

it is good advice and good practice. thanks for watching

Great content as always..! As for tutorials your charisma matches Perfectly which makes it sooo simple to understand every step. Keep up the good work! Crazy underrated channel... Stay Safe 'n' Healthy!!!!

@mikesunboxing

10 күн бұрын

very kind of you, thanks

Well thought out video Mike, Im sure it will be ever so helpful to those with issues on the Discord.

@mikesunboxing

16 күн бұрын

that is the plan

Good one Mike. Thank you.

@mikesunboxing

10 күн бұрын

Glad you enjoyed it james

Great how too video.

@mikesunboxing

10 күн бұрын

Glad you liked it!

great video

@mikesunboxing

9 күн бұрын

Glad you enjoyed it

mantap 👍👍

@mikesunboxing

7 күн бұрын

thanks

I personally would love to see, although I’ve already got this matter resolved, a video by Techtubers about software and hardware you should have to help diagnose pc problems: such as spare low end GPU (GT710) that doesn’t require pci-e power, psu tester device, spare ram, spare cpu etc spare usb key with windows 10/11 another usb with pre-downloaded antivirus / anti malware, mem test software etc.

@mikesunboxing

10 күн бұрын

i'll see what i can do

@MrSamadolfo

Күн бұрын

ac watt meter, pc speakers, cmos batteries, spatula, different monitors, displayport cable, hdmi cable, dvi cable, vga cable

Never bothered always built in case always booted 1st tine😊

@uglybob7505

11 күн бұрын

Yeah, roll them dice !!!! Testing first and building second is for lesser people 🙂

@mikesunboxing

10 күн бұрын

your luck will run out one day, it is just a matter of time

@PapaMav

9 күн бұрын

@tridens aren't you just special?

Thanks for a great video, if we used an AIO can the Fan & Radiator placed near to the edge of the motherboard new the CPU, assume that need to raise the Radiator same level as MOBO and in Vertical Orientation / Standing on its side (if this makes sense).

@mikesunboxing

10 күн бұрын

yes for a short while it can be mounted wherever possible

@dafyddthomas7299

9 күн бұрын

@@mikesunboxing Thanks Mike, extremely useful video; going to build my AIO G14 I7 Mobo in mid Summer

MSI & Intel. it goes well together. i know thanks to MUB HQ. 😀

@rickh8380

16 күн бұрын

MSI does go great with Intel. 👍😁 Been using MSI since my i7-3770 B85 chipset motherboard days. Which still works today since 2012. Cheers

@mikesunboxing

15 күн бұрын

cheers WAPB

Thank you. Not having built a computer for over ten years I’m just wondering how common it is for a pc not to boot up once the build is done on newer components. Unless you missed something obvious I’m not sure why it wouldn’t boot up? Based on your experience what have been some reasons a pc hasn’t booted up. Is is largely a loose cable?

@skystalker7700

10 күн бұрын

Hello! It can be a number of reasons, and a loose cable is certainly one of them. Find a good guide - like this one 😊 and follow it carefully. Building it out of the case is a really good idea, as it is MUCH easier to diagnose things. Once it boots (POST) then it is time to put it all into the case.

@martingolding4951

10 күн бұрын

​@skystalker7700 afaulty ram stick or not properly seated in the slots are a common problem for a non boot or two different sticks .I started building pcs in 1999 and found it quite common in building them

I made a plug in Power Switch using a momentary switch with two wires soldered to it and at the other end a modified Mobo connector that now just has 2 female pins to plug into the Mobo for the +/- posts on the Mobo.

@mikesunboxing

9 күн бұрын

handy to have

edit: he has a tutorial up from 2 years ago, besides my usb was already fat32 hey Mike could you do a video on how to do this "drive partition" thing you say you need to have done prior to updating bios? Thanks

@mikesunboxing

10 күн бұрын

sure here is it kzread.info/dash/bejne/ap2ox7KyldDJabA.html

Hi Mike, do the windows keys on CDKeys work ok?

@mikesunboxing

6 күн бұрын

yes very much so, i would not even consider recommending them if they were fake or iffy. i am assuming you are referring to premiumcdkeys.com

@mikegc3816

5 күн бұрын

@@mikesunboxing OK cheers Mike - you sounds like you are from a similar part of the country to me!

@mikesunboxing

3 күн бұрын

@@mikegc3816 Bristol

I accidentally cut my finger while unplugging the 24pin cable 😢 after testing out of the cabinet

@mikesunboxing

10 күн бұрын

sorry to hear that, hope it heals up soon

@hff7904

10 күн бұрын

@@mikesunboxing yes it was minor cut😅

@dafyddthomas7299

9 күн бұрын

Me 2, cutting my finger recently putting into case a I5 Mobo, just small graze but quite bit of blood came out of my finger

Usually first time will setup outside the box to test.

@mikesunboxing

10 күн бұрын

Good idea to do that before you get to far ahead and might have to undo it all

nice watch mike

@mikesunboxing

8 күн бұрын

Thanks, believe it or not it was a bargain for £20 on amazon bit looks great 👍

@karldee7269

8 күн бұрын

@@mikesunboxing looks like a rolex blue dial gold strap bro

I ALWAYS update to the latest (non Beta) BIOS. My son will not let me do that on his though. He's askaired.

@mikesunboxing

9 күн бұрын

yeah i understand that

Ugh, Intel Stock cooler. And, hate that style retention clip.

@mikesunboxing

9 күн бұрын

yeah it is a horrible design really

CRAP JOKE FRIDAY !!!!!!!!!!!! Say what you like about waiters, but I think they bring a lot to the table !!!

@mikesunboxing

11 күн бұрын

They really do 😂

@PapaMav

9 күн бұрын

Good one Bobo.