RECOMMENDED STUDIO GEAR: (Amazon links below) AUDIO INTERFACE: ☑️ Focusrite Scarlett Solo: geni.us/scarlettsolo-3rd-gen ☑️ Focusrite Scarlett 4i4 (3rd Gen): geni.us/scarlett-4i4 REFERENCE HEADPHONES: ☑️ AKG 612 PRO: geni.us/akg-k612pro ☑️ Beyerdynamic DT 990 PRO: geni.us/DT-990-pro REFERENCE MONITORS: ☑️ 5": Yamaha HS5: geni.us/Yamaha-HS5 ☑️ 7": Adam Audio: geni.us/Adam-Audio-T7V ☑️ 8": Yamaha HS8: geni.us/Yamaha-HS8 SUBWOOFER: ☑️ KRK 10S2 V2: geni.us/krk-10s2v2 MICROPHONE: ☑️ Audio-Technica Cardioid Condenser Studio XLR Microphone: geni.us/at2020microphone ☑️ Tonor TC20 Complete XLR Microphone Kit: geni.us/tonor-tc20kit ☑️ Vocal recording booth / stand for microphone: geni.us/microphonebooth XLR CABLES: ☑️ TISINO 35 ft Balanced XLR cable for mic: geni.us/xlr3ftoxlr3m ☑️ Monoprice 6 ft Balanced XLR Cable for monitors: geni.us/monoprice104761 SHORTCUT KEYBOARD: ☑️ Backlit FL Studio Shortcut Keyboard: geni.us/flstudio-keyboard As an Amazon Associate, we earn from qualifying purchases. Want professional feedback on your track? Mixing or Mastering? www.fiverr.com/firewalk Support us on Patreon: www.patreon.com/firewalkmusic

@loudloud2059

5 жыл бұрын

FireWalk whats the difference between this and sidechaining

No such thing as a clear and precise tutorial like this one. What makes it yet better is the fact that he is teaching a MIXING CONCEPT/PHILOSOPHY with a simple stock plug-in and not just making a fancy plug-in showdown. I think this powerful technique gives more natural, analogue and organic results compared to bare compression. Simply groundbreaking, thank you very much!

@FireWalkMusic

5 жыл бұрын

Thanks, much appreciated! Glad you found it helpful :)

Keep your tutorials as short as this!! There's nothing worse than watching a 15-minute long video on setting up something small

@FireWalkMusic

3 жыл бұрын

Thanks! Glad you liked it :) I always try to keep my videos short and to the point. Most of my videos are between 2-8 minutes long. Unfortunately I get punished by KZread for doing that. The algorithm prefers longer videos that keeps people on the platform for longer, which is why this channel grows slowly. This is also why most KZreadrs intentionally waste your time, by making needlessly long videos, to get more watch time, which will be rewarded by the algorithm which will then show the video to more viewers and so on..

Today will look at how parallel compression is made. How it’s made .

@FireWalkMusic

4 жыл бұрын

:D

Short, clear and precise. Thanks alot bro 👊😎

So great !!

SO straightforward and SO easy to follow! Thank you!

@FireWalkMusic

7 жыл бұрын

Glad you liked it! :)

Thanks man. I have learned so much from you.

Beautifully explained

Thank you so much for this mixing tutorial I came a bit tired but it does´t matter I hope you be able to upload more about this. and thanks again.

@FireWalkMusic

4 жыл бұрын

Glad you liked it :)

Good stuff Sun!!

Great and very helpful video. What helps further is the way he is describing it, and the quality of his voice. A tutorial video without proper expressions​ becomes so dull, but the voice over is great here. Thanks for making this, wish you all the best

@FireWalkMusic

7 жыл бұрын

Thanks! Much appreciated. Make sure to check out my other tutorials as well :)

@HIBYROSE

7 жыл бұрын

FireWalk , I had a question..Is it needed to moderately eq & compress snares and kicks in their original tracks, before sending​ them to the dry and wet tracks? Like Im using my own drum sequence that Iv made using piano roll and the sample sounds from drumkits in Packs. I find these sample sounds have lots of unnecessary frequencies, so I filter them. Should I skip that step in this technique??

@FireWalkMusic

7 жыл бұрын

If you compress the dry track it will defeat the purpose of the parallel compression, as the goal is to maintain the transients as well as getting a punchier sound by compressing it. Unless you want to combine two different compression techniques in one sound. You're basically just splitting it in two, and compressing half of it. You can always EQ the dry track of course, it, that's no problem. :)

@HIBYROSE

7 жыл бұрын

FireWalk Thanks for clarifying that..:)

@FireWalkMusic

7 жыл бұрын

Np! :)

This is a really awesome tutorial bro - thank you 👍

@FireWalkMusic

3 жыл бұрын

Thanks! glad you liked it :)

You sir, are an amazing teacher. I wish you were my next door neighbor LOL 🤣 your probably one of the best to explain clearly. I had to come back and check it out again because I was getting a booming effect. Great tutorial 👍

@FireWalkMusic

5 жыл бұрын

Thanks, glad you find the videos helpful! :)

Great video, thanks. keep it up!

@FireWalkMusic

7 жыл бұрын

Thank you! Much appreciated. I will :)

That was dope! Thanks so much!

@FireWalkMusic

6 жыл бұрын

You're welcome :)

Very good lesson !

@FireWalkMusic

4 жыл бұрын

Thanks :)

Really helpful thanks.

@FireWalkMusic

3 жыл бұрын

Glad it was helpful!

a simple and precise tutorial

@FireWalkMusic

4 жыл бұрын

Thanks :)

nice one there..

i love it so much

@FireWalkMusic

5 жыл бұрын

Glad you liked it :)

Very helpful thank you

@FireWalkMusic

2 жыл бұрын

You're welcome 🙂

Thanks man!

@FireWalkMusic

5 жыл бұрын

You're welcome :)

Thanks

Thank you. Finally I have understood

@FireWalkMusic

4 жыл бұрын

You're welcome :)

This is so Useful thank You sir

@FireWalkMusic

5 жыл бұрын

Thanks, glad you liked it :)

@RaepaMusic

4 жыл бұрын

@@FireWalkMusic your channel deserves more traffic man. Your contents are of high Value

my bro you are gold!! thank you so much..you help me a lot with my production! I just can't get that clear sound ..my mix sound muddy all the time..doesn't matter if I EQ my elements or something..is still muddy..is there a tutorial or can you make one on how to get that clear sound on drums or lead or pad etc.?

@FireWalkMusic

5 жыл бұрын

There can be many causes for this. The low end might be too powerful, or there might not be enough high end in the track, or the low end frequencies are clashing among other things. I have a playlist with mixing and mastering tutorials that you might find helpful, you can check it out here: kzread.info/dash/bejne/h4Brlauwp6XfZbA.html

thank you!

@FireWalkMusic

5 ай бұрын

You're welcome 😀

Good one

@FireWalkMusic

Жыл бұрын

Thanks 🙂

YOU ARE MY GOD THANK YOU SO MUCH BRO

@FireWalkMusic

Жыл бұрын

You're welcome 😀

I love watching your videos. Really well explained and straight to the point. In this video though, I’m not really sure what purpose the drum loop dry channel achieves? There is no compression or effects on the channel so isn’t this just a duplicate of the original drum loop? Could you not use the original drum loop as the dry loop??

@FireWalkMusic

Жыл бұрын

Hi, this video is intended to show the parallel processing process, using compression as an example. Most people will just load a compressor, or any other plugin on a track and then be done with it. That means the plugin is affecting 100% of the signal. Parallel processing is all about using both signals at the same time. So you have one channel with just the original dry signal, with no processing whatsoever, and another one with the processing on it. You can then adjust the dry/wet level between them. This is a technique used a lot on vocals, for example, to retain the transients, while still adding compression. You can get the best from both worlds. This is the old-school way of doing it. Most plugins today have a dry /wet knob that you can use, which is much easier. For compression, 50-60% wet will often give an outstanding result.

Thanks!

@FireWalkMusic

7 жыл бұрын

You're welcome :)

This is is masterclass on how to teach.

Thank you!!!!!

@FireWalkMusic

4 жыл бұрын

You're welcome :)

This tutorial is Fucking perfect.

@FireWalkMusic

3 жыл бұрын

Glad you liked it :)

Thank u for ur reply....can u also make a tutorial on professional vocal processing....

@FireWalkMusic

5 жыл бұрын

You're welcome. Yes, this is already on my "todo list" :)

can you do a tutorial on how to mix string instruments and how to add the right effects to them?

@FireWalkMusic

7 жыл бұрын

I have a "how to make orchestral music" tutorial planned. But I can't promise when it'll get done. I have a lot of stuff on my to do list. Hopefully I'll get to it eventually :)

Can u pls make a video how to add reverb to aal instruments and make it clear

Thanks for the tutorial. I've got only one question and that is if one are not better up with the same plugin in both the dry and wet inserts because of phasing issues? I heard about people using the same effects on the dry as on the wet except them plugins is not affecting anything. It's just about the signal phase?

Mate you literally sound like the voice on the Airplane, when they describe the Saftey instructions

@FireWalkMusic

4 жыл бұрын

:D

I watched a different video on this same technique where they had me put the drums through the traditional fruity compressor and fruity fast dist on like 30%. maybe that's good for some drums/mixes, but for mine it was a disaster. this way is so much better and simpler!

@FireWalkMusic

2 жыл бұрын

Thanks, glad you liked it! :)

Please make a video relatinng to that how does a chord help to make melody or lead. Please make this video

@FireWalkMusic

6 жыл бұрын

Thanks for the suggestion

is this how the dry/wet works in fl studio's reverb right?

@arthurclement1515

4 жыл бұрын

That's how the dry/wet works in any plugin/add-on/whatever ever.

Hey, I like ur videos. One question.. Should I have to use compressor in each and every instruments I use while making beats or just selective ones? U got the question right??

@FireWalkMusic

6 жыл бұрын

Only use compression if it's needed. Don't just use it because you think you have to use it. It has to have a purpose. :)

A video on basic mastering pulgins and how to use them to do mastering

@FireWalkMusic

5 жыл бұрын

Thanks for the suggestion. This is already on my "to do" list :)

@norfsyq9660

4 жыл бұрын

FireWalk has this video been done yet???

Can u make a video on fruity limiter explaining the compression knobs

@FireWalkMusic

4 жыл бұрын

Yes, it's on my list. :)

should you route too, or sidechain too the parallel compression? for vocals

What is best way to do this? Duplicate channel in dry wet or using fruity send?

can u please make a tutorial on advanced compression process in fl studio

@FireWalkMusic

5 жыл бұрын

Hey, yes, a compression tutorial is in the works.

Hello, I have a question - if I want to add a second parallel processing on the same track which is already parallel process should I create another two dry and wet tracks, or I can add the second wet parallel track to the first dry? Sorry for the complicated question and thank you for you tutorial!

@FireWalkMusic

4 жыл бұрын

If you mean what I think you mean then yes, you can use another plugin as well for this same setup

Does it work too, if I copy the drum, so I have 2 drum loops, and I put 2 compressors in the 2 drums, one with settings to bring out the lows and mid lows, the other for the highs and mid highs

Hi firewalk... My question is if the root note of sample is E n it is playing in C5 in piano roll if my project is in G what I have do?

@FireWalkMusic

6 жыл бұрын

Open the sampler and double click on the right key in the little keyboard keys on the lower part of the sampler, that way you can select your root note.

Do you add parallel comp b4 you mix your beats or after?

hey quick question why can't we just setup an aux/send channel? like how we do with reverb and delay

@butterxl8750

3 жыл бұрын

if u do it like that then the wet bus COMPRESSION will get effected by dry input gain... u dont want that if you mix dry with wet... u want full controll of the send WITH no input gain changes from the dry

🤯

Wow! Very impressed. Straight to the fucking point!!! Sorry

@FireWalkMusic

4 жыл бұрын

Thanks. Glad you liked it :)

Is it possible to just tweak the compressor’s mix knob “in the effect chain” to get the same kind of results? (Not the compressor’s internal mix knob)

@FireWalkMusic

5 жыл бұрын

Yes it is, but Image-Line don't recommend touching that knob because it can cause PDC issues which again result in phasing and such. Most modern plugins come with a built in wet/dry knob and it's better to use that knob instead as it won't have the same issues. This video just showcase the old school method of doing it, and explains what's actually happening.

@TetoArusu

5 жыл бұрын

Thanks so much for the detailed explanation! Now I know what I should do. 👌

Quick question. Wouldnt the frequencies clash between the two tracks? Is it ideal to lowcut on one or the other?

@FireWalkMusic

4 жыл бұрын

That's always a possibility. It depends on the sounds used. If it starts to phase, you'll hear it very easily.

Hi would the transient processor like the one in FL Studio do the same thing as parallel compression.

@FireWalkMusic

5 жыл бұрын

The transient processor is basically a simplified compressor with easier controls. It has two main knobs which you can use to either enhance the sound. The first is the attack, which controls the transients, which is the first part of the sound. The Attack of the sound (the click / transient of the sound). The release controls the body of the sound. If you turn it up it adds more weight to the later parts of the sound. If you use on a kick for example it becomes more boomy. You can read more about the transient processor here: www.image-line.com/support/flstudio_online_manual/html/plugins/Transient%20Processor.htm

hello, i was just thinking if i used more than one eq on a voice track prabably because i exhausted all the bands and still felt like equing more to ma voice, is that ok?

@FireWalkMusic

6 жыл бұрын

Yes, people do that all the time :)

We can do the complete process inside patcher too...... Will that cost PDC issue

@FireWalkMusic

5 жыл бұрын

This video is a bit outdated now, I recommend using patcher. There shouldn't be any PDC issues using patcher now.

Why submix? And where to add reverb or delay?

Hello Sir , the procedure in this video is the same in " vocal " parallel compression ? and where to insert effects like autotune , eq , in submix thank you ???

@FireWalkMusic

4 жыл бұрын

Yes :)

@kingcleezy467

4 жыл бұрын

@@FireWalkMusic thank you sir

can't you just put them on the same channel and then just lower the compression volume on the effect volume rack?

@FireWalkMusic

7 жыл бұрын

That's right :) That's definitely the easiest way to do it. Unfortunately the PDC in FL doesn't always work properly, causing issues with some plugins (even some native ones) when using this method. The example shown in the video is the old school way of doing this, but it basically does the exact same thing :)

Have you already uploaded a video on Compressor in general?

@FireWalkMusic

5 жыл бұрын

Not yet. There will be two more videos about compression. "Compression explained" and "how to mix part 4 (Compression) where we'll go more into where to use compression and why.

@user-ox7mm1lf3e

5 жыл бұрын

Nice :) I hope you tell us WHEN to take advantage of it

Can I use the first drum loop channel as DRY ?

@FireWalkMusic

4 жыл бұрын

There are really no rules in music production. If you think it sounds good, then do it. :)

wow. how have I never seen that submixing option? it's like i just leveled up and unlocked a new ability lmao

FireWalk I really would like to see a video on PDC I'm having issues using ozone 8 it's giving me issues. I have a i5 8300u processor, 24 gigs of RAM, it's not my computer it's something with setting up PDC and I can't get it right. Also when I side chain my 808 and kick drum I get to much pumping on my 808 any suggestions. Thanks great videos

@FireWalkMusic

5 жыл бұрын

FL Studio has always had issues with PDC, but they reworked the entire PDC system in FL Studio 20, so now most of those problems should be resolved. Which version are you currently on?

@jaytoveproductions6370

5 жыл бұрын

@@FireWalkMusic I'm FL 20 I think it must of been to many inserts or it happened to be that session cause it worked in the next one

@FireWalkMusic

5 жыл бұрын

If it keeps happening you might want to consider making a post about this in the bug report forum on the IL forum. There might be some bugs

@jaytoveproductions6370

5 жыл бұрын

@@FireWalkMusic which mode should I be running in for playback tracking driver, hybrid, or mixer?

@FireWalkMusic

5 жыл бұрын

You can use Hybrid unless you are having any issues. If the tracker isn't matching the playback then try setting it to mixer.

Awesome explanation! But couldn't you just use the send (or insert) function to do the same thing, instead of having to make 2 new channels?

@FireWalkMusic

7 жыл бұрын

Alex, the dedicated send tracks to the right in the mixer has been removed in the newest version of FL Studio (12.5). The reason for this is that in FL any track can serve as a send track. They are in reality no different from any other track, they are just tracks with a sidechain, docked to the right. So it doesn't matter what track you use. :) PS: If those docked send tracks are a vital part of your work flow, and you want to continue using them the same way in the newest version, you'll have to sidechain all tracks to 4 dedicated sends, and then dock those 4 sends to the right and save it as a new template. :)

@alexbombelli

7 жыл бұрын

Great, thanks for the explanation!

@FireWalkMusic

7 жыл бұрын

You're welcome :)

Good tutorials man I will subscribe 2 times if I had 2 accounts.

@FireWalkMusic

5 жыл бұрын

Thanks! Much appreciated :)

My question is when both signals are blend together or playing together , are't they having any phase issues?

@FireWalkMusic

5 жыл бұрын

The alterations to the waveform will usually be sufficient to prevent that, but not always. In that case you would have to try to reverse the phase, or push one of the signals a bit out of time by a few ms. I know there's also phasing issues involved when using the mix knob in the mixer itself, which is why IL doesn't recommend using it. If you are using third party plugins, they usually have a built in "mix" section, where you can adjust the level, and that's the best option. It will prevent phasing issues and is overall the quickest way to do it. The method shown here is the old school way of doing it.

@NASTYFRXQ

4 жыл бұрын

@@FireWalkMusic one method is to duplicate the wet effects plugin in dry mixer track and let them remain unprocessed, compress the signal in only wet mixer track. This way phasing issue will not occur since both mixer tracks have same plugins.

@MitchWise86

2 жыл бұрын

@@NASTYFRXQ that worked. I used the same basic limiter he did in video. Did what you did and it help. I threw it on but didn't tweak it. It helped with the phase. Lots of crazy symbols in my break beat. Thanks. Feel like in a laboratory

Why did you need to make a drum loop dry channel? If your original drum loop track (channel 1) is going to the master wouldn't that be your dry channel? Couldn't you do a send return to the wet compressor channel (channel 3) and get the same effect?

@FireWalkMusic

3 жыл бұрын

I suppose you could, but I always prefer doing routing this way because I can then add additional effects and processing in the mixer itself before it ends up at the master. But there's nothing that says you can't do it that way if you prefer that :)

@naveedstegamat6283

3 жыл бұрын

@@FireWalkMusic thanks for your response!! Just tryna understand the differences and get my mix down a little cleaner.

How do u stop the levels rising? I usually do dry wet then route them to a bus is that good practice?

@FireWalkMusic

4 жыл бұрын

Yes, that's a good solution :)

In which pack can I find this loop?

@FireWalkMusic

7 жыл бұрын

I think it was from a remix kit. I'm not sure. It's an old tutorial and I don't have the FLP any more. :\

Wouldn't you also need to put a compressor on the dry channel strip, except without any compression settings on. This would stop any latency/phase issues?

@FireWalkMusic

5 жыл бұрын

The PDC has been redesigned in FL Studio version 20 so now there should be no more trouble with the PDC.

@hawnta365

5 жыл бұрын

@@FireWalkMusic Ah I didn't know about that, thanks!

Is this the only way?

I need help. When I aux some plugins like mv2 or rvox it sounds phased.

@assanderretro6430

4 жыл бұрын

you have to put on the dry channel the same plugins as on the wet cannel BUT have to turn them off. thats because there is latency on the channel when you put plugins

what is PVC issues btw?

@FireWalkMusic

Жыл бұрын

You mean PDC? It stands for plugin delay compensation. This used to be a big issue in FL Studio, but it's not so much of a problem these days as they reworked the entire system a few years back.

Whats the point of the submix again?

@FireWalkMusic

2 жыл бұрын

Hi, a submix can be very helpful in various ways as you can for example process several tracks as one. check out this short video that explains how to use submixes here: kzread.info/dash/bejne/c2h1zNmekceej9I.html

isn´t the same if you turn down the dry/wet knob of the limiter in the mixer?

@FireWalkMusic

6 жыл бұрын

Yes, kind of. The dry/wet knob on the mixer doesn't always work properly for all plugins though, so I decided to show the old school method of doing it, to better illustrate what's actually going on. Most decent plugins these days have a dry/wet knob built into them, such as the fabfilter pro C2 for example, which makes this very easy to do. :)

@rodrigorodrigues8857

6 жыл бұрын

FireWalk Thank you man, I love your tutorials

@FireWalkMusic

6 жыл бұрын

Thanks :)

Can we do it using patcher?

@FireWalkMusic

6 жыл бұрын

Yes :)

What plugin you us in sub mix chanell??

@FireWalkMusic

2 жыл бұрын

That would depend on what kind of submix it is. Percussion.. bass.. leads etc

@julios1546

2 жыл бұрын

@@FireWalkMusic for vocal? And drums loops? And 808?thanks

what are ppc-issues? 3:37

@FireWalkMusic

5 жыл бұрын

You mean pdc issues? PDC stands for plugin delay compensation. It's a feature built into daws which help keep everything in sync by calculating the latency created by the various plugins, and adding the appropriate delay in order to give the cpu time to catch up an keep everything in sync. Some times it can fail though, especially in older versions of FL Studio. The newest verisons of FL Studio had the PDC system redesigned, so there's far less issues with it now.

Wouldn't this cause a bit of phase issues?

@FireWalkMusic

5 жыл бұрын

Potentially. This is the "old school" way of doing it. By doing it this way you can control the phase and the offset to prevent just that. Image-Line actually recommend against using the mix knob in the FX section of the mixer inserts for just that very reason. :)

I get phase issues with my cinematic drums, any tips?

@FireWalkMusic

4 жыл бұрын

Try reversing the phase. You can also try using panning. If nothing works, try offsetting one with a few MS

@officialstrecker6881

4 жыл бұрын

@@FireWalkMusic how do I reverse the phase? Is there a plugin for that or can you do it in the built-in FL studio?

You should use patcher, that way it only takes up one mixer track instead of three

@FireWalkMusic

5 жыл бұрын

Indeed! This video is a bit outdated. Now, as you say, we can use patcher to do the same thing. Patcher was recently updated to take full advantage of multicore processors too, so now it shouldn't be much of a drag on the system any more. The PDC was also reworked in FL Studio 20, so there shouldn't be any PDC issues any more either. :)

@aridavids4335

5 жыл бұрын

FireWalk, just wanted to say thank you so much for your videos, they are extremely helpful and some of the highest quality tutorials on KZread. Keep doin what you are doing👍🏻👍🏻

@FireWalkMusic

5 жыл бұрын

@@aridavids4335 Thank you! That means a lot! :)

Petition for God to book a place for this man in heaven. Whenever he dies he must rest there.

@FireWalkMusic

4 жыл бұрын

Thanks! Much appreciated :)

This hits alot harder th

Parallel EQ.

I was shown that both the dry and wet buses need to have the same plugins in the same order or it wont work. Is this statement false?

@sraey8133

5 жыл бұрын

I am sure order does matter...but nothing like it won't work. It would.

@nathanwalsh2757

5 жыл бұрын

@@sraey8133 okay thanks. Ot was an internet money tutorial so im surprised they got it wrong

@sraey8133

5 жыл бұрын

@@nathanwalsh2757 lol if it was on internet money then I might be wrong..I don't wanna misguide you..but at last it comes upon your ears. Even it it's wrong, you like it that is right!!!

@FireWalkMusic

5 жыл бұрын

All daws have automatic plugin delay compensation built in, so this shouldn't be an issue.

@nathanwalsh2757

5 жыл бұрын

@@FireWalkMusic okay cheers man 🔥🙏🏼

Mixer 2 & 3 are not going to the master only. There are tons of wires there 👀

@FireWalkMusic

6 ай бұрын

Those are probably for sidechaining. That's something different. :)

is this your voice?

@FireWalkMusic

6 жыл бұрын

It is a real voice if that's what you're wondering, his name is Steve :)

@maruko8324

6 жыл бұрын

ohh. hahaha damn I have to subscribe to you right now

That’s the easiest way to PA-Comprress

Then if we want to parallel compress the entire track, we will connect 3143214123 tracks to two different bus tracks. Wow.

@FireWalkMusic

Жыл бұрын

This video just explains the process and the principles behind it. Most modern third-party plugins have a dry/wet knob that you can adjust, and it basically does the exact same thing, and is much easier to use. :)

For the sake of of this project, im gonna use fruity compressor. *opens fruity limiter

@FireWalkMusic

4 жыл бұрын

Which is also a compressor. 🙂 it's a two in one plugin. Fruity compressor is basically it's older brother. I guess I changed my mind and decided to go for the newer plugin instead. At the end of the day, it doesnt really matter what compressor you use. :)

went a little too fast for my slow brain

@FireWalkMusic

7 жыл бұрын

You may benefit from watching this video, explaining what it's all about and why. That makes it easier to understand: kzread.info/dash/bejne/dXiIu9KkeJWdk5c.html