Thank you mate I watched your video of how to adjust the pressure in my trucks tipper pump and now the it works perfect 👍👍👍

You don't understand how much b.s. this saved me from. I have a dump truck that barely lifts itself empty. I just need to adjust this...Thank-you from Rhode Island!

@backintheshop9604

2 жыл бұрын

Definitely try that first but your pump might be weak.

@AscendGP

2 жыл бұрын

Yea the pump is dead. Motor runs fast but acts like it is low on fluid...I'll just get a brand new used pump. Thank tho.

Great instruction on this pump. Keep up the great work.

@dporrasxtremeLS3

5 ай бұрын

Great!

I enjoyed watching your video.twas properly explained.i have an exact pump that's suddenly stopped.help needed.give thanks 👍🏾

Thank you for the help

Thank you very helpful

Nice video. I have a dual acting pump. How could I set up a permanent psi gauge?

Great job

Anyway possible to increase the flow of these pumps ?? They run at around 1.5-2 gpm…. Would be nice to get 3gpm. Would lift the dump body probably twice as quick…

TENGO UNA BOMBA HIDRAULICA DE 24VDC DE 3KW, ¿EL ARRANCADOR QUE TIENES EN EL VIDEO ES FACTIBLE PARA PRENDERLO?

Appreciate it video

I’ve a Sealey Yankee 10 Tonne Bench Press - what hydraulic power pack would you recommend?

A cuantos amperios funciona el motor o de cuantos amperios es la fuente de alimentación al que lo conectaste ?

Very informative.Would like to know what power source you are using to drive it, what amps does it deliver? Tks.

@backintheshop9604

10 ай бұрын

On a normal daily used situation I would recommend at least one 850 cca battery. But it’s a good idea to have to hooked in parallel to double the amperage.

I have a single acting pump off a pallet lifter. Looks very similar to this one. Question is, how would you go about converting it to double action?

@backintheshop9604

2 жыл бұрын

It should have a pressure and a tank port/return you’ll have to get a spool valve of some kind run you’re in an out from your pump and then you’ll have the spool valve to reverse the flow to whatever you’re working.

@Brute4rce1111

2 жыл бұрын

@@backintheshop9604 Awesome! Thanks for the quick response! The pump is a hydr-app 24 volt that I just bought from eBay. I am going to use it to power a hydraulic lift mechanism on an rc track drive robot. I have a mill and a lathe, so I might machine a spool for it to make it double action later on.

ans also what does adjusting psi do make it faster slower?

Thank you, this adjustment helped me with my dump trailer build, Do u know any way to slow the return? As my trailer tipps back down fairly fast

@backintheshop9604

2 жыл бұрын

Is yours gravity down?

@dlewis4647

2 жыл бұрын

@@backintheshop9604 Mine is, do you know a way to slow?

@backintheshop9604

2 жыл бұрын

Yes I’m just learning about this myself you can get an adjustable flow valve for about 60 bucks You can find them all over the Internet.

@mariochavez1824

2 жыл бұрын

I have 2013 f550 dupm dont work I press the raise button and it doesn't do anything it doesn't make a noise like it's dead can you help please? 

I have a bale bed on my truck. It won't lift the arms up or down or side to side. Could it be the pump. Is all signal action can they be turned into double act

Great video !

Wow cool; is their a way to speed up the pump too lift a little quicker ☝️😁

@backintheshop9604

2 жыл бұрын

No there’s no way to speed up the pump if it’s an electric one.

ive got a pump like this but it has 2 solenoids and another adjustment on the other side. now does the adjustments do the opposite side? (like this appears to do), mine does have forward and reverse rotation. 0

@backintheshop9604

2 жыл бұрын

It should only have one pressure relief/adjustment the other one might be just a plug.

Are the pressure the same going an down my trailer up is strong coming down has little power to lift anything up on the end of the trailer?

@backintheshop9604

3 жыл бұрын

They should be same. If there not you probably have a bad solenoid.

What model is this pump or brand

Hi how bout. Wiring 12 volt pump.. my hydraulic pump has one wire out back .I need to look at box on the side . By knob. Probably pressure knob. Says not over 1000 pounds. It’s a small platform lift lol. Can’t find non like it. Fabtek think they sold out to hyster I read. ?? I’m just learning, but I can start a Harley. Lol

I’ve got a 10,000# dump trailer and it won’t lift 6 ton in the trailer! Can I adjust more pressure even if it’s set to factory specs? The pump I have runs when going up and going down?

@troywiseman5516

Жыл бұрын

It's never a good idea to change the pressure over factory spec with dump trucks / trailers they usually get worn out from contamination dirt gets thru the breather wears out the pump and the lift cylinders but the weakest part is probly the piston seals on the lift cylinder

@markcole6475

Жыл бұрын

@@troywiseman5516 just seems odd this dump trailer has never been able to dump anything over 6000 # and it’s rated for 10,000# I’ve owed since new!

@ViVA-MEXICO-AMLO

Жыл бұрын

I did this to my dump truck and busted the pressure hose, so had to upgrade to a 5000psi pressure hose

@markcole6475

Жыл бұрын

@@ViVA-MEXICO-AMLO I’d be more than happy to do that if that’s what it takes to dump heavier loads as it should…..very frustrating getting 3 yds of trap rock and the dump trailer won’t dump it…..doing it by hand is defeating the purpose of using a dump trailer!

I have a single acting pump but my gravity down goes down very slow. Do you think I have a bad solenoid. I’d rather make it a duel solenoid system but don’t know what to do with the second port

@backintheshop9604

Жыл бұрын

Yes, your solenoid is most likely bad. To use one as a double action, you just have to have a spool valve with a in and out and then you can use it to control the direction of pressure.

@truhawaii5957

Жыл бұрын

@@backintheshop9604 My solenoid on a older Fennel fluid pump doesn’t have a part number on it. Are most solenoids coils within the same voltage interchangeable or are they pump specific? Having a hard time figuring where to start my part replacement search.

@backintheshop9604

Жыл бұрын

@@truhawaii5957 most of the solenoid coils are the same either 12 or 24 V but I’m pretty sure the work on either. The part that’s different is the stem or mechanical part that the coil fits on that is going to be more specific to your pump you may be able to remove it and take it to a local Hydraulic shop and see if they can identify or match it up by dimension.

very goo!

Hi, how do you adjust the down speed. I used a pump like this on a 2 post lift, but it comes down very slowly. Can it be adjusted? Cheers C

@backintheshop9604

2 жыл бұрын

Is it electric solenoid control for the down function?

@simpleautosolutions

2 жыл бұрын

Yes bud, basically same as yours but mine has square oil reserve.

@backintheshop9604

2 жыл бұрын

There’s no way to adjust electric valve You might need to try to find one with a higher flow rate.

@simpleautosolutions

2 жыл бұрын

@@backintheshop9604 Thanks for your help, that answers my question.

Wiring connecting hoses

I have a hydraulic pump like yours but I cannot see how you wired it. I believe I have it wired correctly but all it does is click, it will not circulate the fluid. Can send me a picture of how you wired it? or link? I am using a 2 prong toggle switch for the lift. If it would work better using a 3 wire up & down controller, I might have to do that.

@backintheshop9604

Жыл бұрын

Mine just has a power and a ground hook up. The solenoid and remote are already pre-wired. I just tapped into there is no wires for my extended remote. You should be able to look up the model of your pump and find a wire diagram on Google images or the manufacture website.

Number one problem is dirty or water in hydraulic fluid Drain it once a year and change filter 😊

Mine is a double acting and has 2 ports. 1 with cap the other without. Do you know which is which?

@backintheshop9604

5 ай бұрын

you’ll have to find a hydraulic schematic for that particular pump, or check with the manufacture.

I need help with a porta power pump I bought that doesn't Force the fluid to the cylinder a video on that would be cool there's not much on the internet about them

@backintheshop9604

Ай бұрын

Check the fluid level, make sure all of the couplers are actually releasing, so the fluid can flow other than that. You may have to disassemble the entire thing and do some investigating.

@kellyhines5170

Ай бұрын

Fluid was good. I swapped the pumps with one I borrowed and used the hoses and the cylinder from the kit and everything worked normally. So it's something inside the pump. And that's were I have an ignorance overload.😅..I just can't grasp the overall mechanics of the thing until someone explains it to me.. I have the vevor 12 ton jack.

@kellyhines5170

Ай бұрын

Sorry for going off topic. I don't normally do that..

I have a lowboy trailer using the same hydraulic system. The trailer will go up but leaks down in about 30 seconds. It has two way cylinders that pressure down. I took the check valves out and they seem to be working. What do you think the problem is ?

@backintheshop9604

2 жыл бұрын

If there’s not trash in the pump valves and they look fine the cylinder probably needs repacked.

So, if I'm going to be running a cylinder on a dump trailer with a max working pressure of 2200psi, what would be the best pressure to set the pump at?

@backintheshop9604

7 ай бұрын

You will want to set it to 2200. That way you don’t blow out your cylinder when it hits the end.

@philliphall5198

7 ай бұрын

All cly have a safe rating and best not to ever go above it😊

Will that pump lift a bucket truck boom and turn it also?

@backintheshop9604

2 жыл бұрын

Not sure your set up but yes it should work.

@yourfavoritedenturewearer

2 жыл бұрын

Lifting and turning is all in the valving you use the levers and valves, most bucket trucks only have one pump on them but they have to be dual action pumps.

You must not have seen many hydraulic pumps, mine on my dump truck is single acting, and it only has on port not two. And I just replaced it with the same pump and again one port two, not one being plugged just one port, it raises up and gravity feeds back down. Just to let you know there are lots of single acting pumps that have only one port.

@backintheshop9604

2 жыл бұрын

As long is it has two ports a single action pump can be used for anything with the right control valve.

@yourfavoritedenturewearer

2 жыл бұрын

@@backintheshop9604 I understand all that believe me I have worked on plenty of them, but what you said in the video was that all pumps come with two ports and that is not correct, you can buy single action pumps with only one port like the two I have, they are designed to replace PTO pumps that gravity feed back down on older trucks like My 59 Ford dump truck. You said you have never seen a single acting pump with only one port, I just wanted to let you know they do make them and they are available for people who need them. Look up part number 36NE08 on the Grainger website and you will see what I am talking about ..One port single acting pump, not two ports. I think your doing great with describing thing and how they work, but if you tell people that all pumps have two ports, then you are misleading them, because there are plenty of single acting pumps with only one port on them.

@backintheshop9604

2 жыл бұрын

Oh okay I understand. Yeah I haven’t personally seen one with only on port. I guess if you needed to change it you’d have to installed a return port in the tank. Thanks for the info.

Whats the benefit of adjusting the pressure?

@philliphall5198

7 ай бұрын

Lifting more but it can also damage the pump if you over the limits

maybe could help me..my pump is used on a tow rig aswell every is working but my wheni need to open l arms it doesn't open makes a clicking sound like it's out of fluid

@backintheshop9604

2 жыл бұрын

It sounds like one of your Solenoid valves is bad. You’ll have to figure out which one controls the arms. If it’s clicking the solenoid it self should be fine but I would check and make sure you have a good 12 volts to it. The valve threads into the block and the solenoid fits onto it you remove the solenoid and then unthread the valve. The pressure relief valve it’s just for Max pressuring you shouldn’t need to adjust it it’s been working

My friend hi you doing I have 2013 ford f550 dump no work I press the botton up doing nothingI press the raise button and it doesn't do anything it doesn't make a noise like it's dead 

@backintheshop9604

2 жыл бұрын

Got to check for power.

@backintheshop9604

2 жыл бұрын

Got to check for power.

@mariochavez1824

2 жыл бұрын

How can I do that. thanks I will share your video it helps a lot of people save money

@backintheshop9604

2 жыл бұрын

@@mariochavez1824 you need to take a volt meter and check all your powers and grounds.

U

My solenoid just clicks when I press my buttons... And motor does not come on when I connect it directly. IT'S BRAND NEW!!! NEVER BEEN USED... COULD IT BE VOLTAGE? BATTERY IS NOT COMPLETELY AT 12V ON THE VOLT METER

@backintheshop9604

10 ай бұрын

I will check your battery. Make sure it’s good and all your connections are good. If that all checks out I would say you have a brand new defective pump.

@philliphall5198

7 ай бұрын

Check your ground, it has to have very good connections to work Check stem on solenoid for rust Happens to new ones also

@dereksuperstrong1210

4 ай бұрын

Mine does the same thing. Take a small hammer. Tapp the motor. Tap it on the end. Or on the side. Or on top.. I have to hit mine on the negitive post

A hole lot of talking about his plans with the pump. Just get to the point

I got to looking on mine, mine has 2 of where yours has only 1, mine is a dual I believe, going to 2 cylinders, up and down, also mine doesn't sound like this does, btw mine is a northern tool brand

@ycali609

5 ай бұрын

Mine has 2 also. 1 with a cap on it