You saved me twenty minutes digging through an owners manual; very easy to follow instructions. Thank you!

Exactly what I needed after we lost power a few times in a week and it lost memory, short and concise! Thank you sir

Your FULL explanations were Definitely Most Very Very Very Helpful - after watching about 10 other videos - YOUR’s is simply the BEST!

Best video on the “excessive force 4-3” error! Got my lift master working again with your instructions

This was great information. I originally thought my chain needed a big adjustment. Now it's almost perfect after setting the down limit. Thank you

This helped me adjust my door. Thanks.

Nice and clear instructions, thanks.

Omg. Totally awesome. I love you sir. I can even so this myself. God bless you

Thank youuu so much. I've been confused with the other videos on how to do this because my garage door motor is different from the newer ones. I don't have fancy buttons like the others but this helped allot thanks man. You're a champion

AWESOME WORKED GREAT THANKS!

Great video, worked like a charm!

Thank you for this video! It helped tremendously.

Thank you so much sir, that fixed my door.

Life saver man! Thanks!

Thank you!! This was exactly what I needed!

Thanks , My problem is solved . It opens and closes like a charm.😀👍

Thank you so much! Awesome!

I’m definitely gonna have to try this when I get home from work, I’ve been trying to figure out what the yellow and down arrow mean when they keep flickering, I will let you know if everything goes according to plan, once again thanks for this video.

You are awesome for sharing this thank you

Thank you 🙏

this is a piece of cake Thanks I enjoyed it.

Thanks

thank you soo much !!

Sick vid!

Thank you

Thank you so much sir🙏🙏🙏

Your door charm was more powerful than my "open sesame" spell. Thanks. :)

@GarageDoorGuidance

3 ай бұрын

😂

👍💯

Would this adjustment also help with issue of door not reversing when going down and face an obstacle? Thank you

@GarageDoorGuidance

Жыл бұрын

Yes that is correct

@ED0000

Жыл бұрын

@@GarageDoorGuidance Thanks a lot!

Followed the instructions but when I tap the down button it flashes and stops. Now I’m getting flashes 1up and 2down. What do I do? I got some new sensors, reworked Avery thing perfectly, I don’t understand what else to do. When I put the sensors face to face they still don’t light up

@GarageDoorGuidance

3 жыл бұрын

They must be wired incorrectly or stapled through somewhere. This is assuming you have the correct sensors on. Make sure you have black to black and white to white connected in the back of the motor. Sometimes a staple can push too hard on the wires and connect the two wires as well.

After I set the limits on the garage door opener, is it going to require me reprogram the keypad and the remotes?

@GarageDoorGuidance

Ай бұрын

No

Thank you for this video. Is there a reason why when I try to test the cycle, the up arrow works but then down arrow doesn't? It just flashes and click for about 6-8 clicks. The sensors look aligned, and there's nothing in the way. Great video.

@GarageDoorGuidance

3 ай бұрын

I’d try to adjust those sensors a little bit anyways to see if it works. I’ve seen them pretty well aligned and still be the issue

@aperson1122

2 ай бұрын

Would it works? I am having same problem.

@GarageDoorGuidance

2 ай бұрын

@@aperson1122 the sensors can look aligned but still cause the issue i would start there

@GarageDoorGuidance

2 ай бұрын

You can try that haha

@aperson1122

2 ай бұрын

I wanted to update my problem for other readers. It's solved. After two days getting crazy: sensors aligned but still got the code 4-6 (4 up - 6 down). Over Chamberlain web site, the 4-6 code says checking the sensors alignment, make sure the wires install correctly on the Opener....and I did. Found out the problem was I replaced the old wires of the sensors but not the one connects to the remote. Replaced that one and now it's fine.

is down pressure adjustable?..I have replaced my Heavy wooden door with a much lighter door. My opener stops on the down part...can it be adjusted?.

@GarageDoorGuidance

3 жыл бұрын

It does it on its own when you run it up and down after setting the limit. Have you made sure nothing else was in the way / affecting it ?

@rickhilliard2545

3 жыл бұрын

@@GarageDoorGuidance I found out it automatically adjusted.Thanks for rapid reply..lol

@GarageDoorGuidance

3 жыл бұрын

Sorry lol I don’t check this thing much to be honest 😂 oh well. Still seems to be helping people out so I never removed anything

@rickhilliard2545

3 жыл бұрын

@@GarageDoorGuidance No problem ..great video's.

I was trying to adjust this and did it wrong the first time so I attempted a second time. Now when I get into “edit mode” and press the up button the motor does not attempt to move the door. Then I hit the middle button and same happens when I press/hold the down button. Have I completely broken my opener? Did I blow some fuse somehow? I’m completely befuddled.

@SteveBoyer10

2 жыл бұрын

Well I gave it 5 minutes, went back and it worked fine. Who knows but oh well

@GarageDoorGuidance

2 жыл бұрын

Could be it overheated, I was just going to suggest to give it a few minute

@thurm101

Жыл бұрын

It overheated. Chamberlain rep said that happens to protect the logic board. 10 minute cool off is what expected to use.

My motor does not responde to this, however the door opens and closes fine, I just need to shorten the movement a bit. Only show 2 lights on the Down arrow. Do someone know what this means?

@GarageDoorGuidance

Жыл бұрын

Same controls and you hood the square but nothing beeps?

I was playing with the buttons before seeing this video, now the door won't move and lights just blink. Is there a way to rest or do I need to do something else?

@GarageDoorGuidance

Жыл бұрын

Typically unplugging it fully for 5-10 minutes should re set it? Have you tried this?

@jaydub20

6 ай бұрын

Having same problem did you get it fixed ?

Min 3:10 is where mine trying to go down then comes up and starts blinking? Any suggestions?

@GarageDoorGuidance

Жыл бұрын

Safety sensors are almost always the culprit at that point

I have Chamberlain (B2215T), look exact the same as this one. I am having problem of setting up travel limit. Followed all steps but at the test cycle, it goes up fine but not going down. So frustrated.

@GarageDoorGuidance

2 ай бұрын

I’d recommend calling chamberlain at that point, I suspect RPM sensor or logic board possibly

@aperson1122

2 ай бұрын

I wanted to update my problem for other readers. It's solved. After two days getting crazy: sensors aligned but still got the code 4-6 (4 up - 6 down). Over Chamberlain web site, the 4-6 code says checking the sensors alignment, make sure the wires install correctly on the Opener....and I did. Found out the problem was I replaced the old wires of the sensors but not the one connects to the remote. Replaced that one and now it's fine.

My door will test great but when I open and close it , it's still a couple inches off the ground. Is there something else I can do? It's a liftmaster.

@GarageDoorGuidance

3 жыл бұрын

Have you fixed this already ? Sorry for the late response!

@lindahinojosa299

3 жыл бұрын

@@GarageDoorGuidance it's still doing it. Thank you for responding to my comment.

@GarageDoorGuidance

3 жыл бұрын

Linda Hinojosa when you say it tests great, what do you mean ?

How far down should chain hang after closing the door

@GarageDoorGuidance

3 жыл бұрын

Not very far at all. It should really only droop a tiny bit

@deanthesavage

2 жыл бұрын

@@GarageDoorGuidance Normally I like to close it just tight enough to reverse off of a 1 inch high object.

I can only get the unit to go down in short increments. one week old

@GarageDoorGuidance

3 жыл бұрын

Rpm sensor, call Liftmaster they should send you a warranty replacement

My Up arrow lowers my door, and my Down arrow raises... having a hard time adjusting

@GarageDoorGuidance

3 жыл бұрын

Have you figured it out ? My guess is the trolley and chain got put on backwards

@GarageDoorGuidance

3 жыл бұрын

Sorry for the late reply, haven’t had access for a while

@marlodiaz7951

3 жыл бұрын

@@GarageDoorGuidance mine had the same issue so that when it detects motion while opening, it’ll close. And when it closes, it doesn’t sense motion and doesn’t reverse up when someone passes. Tried checking the trolley and it’s in the correct direction

Morto vene, Tuta cualidate

@GarageDoorGuidance

7 ай бұрын

?