IF THIS HELPED YOU THEN HELP ME HERE www.paypal.com/donate/?token=7rVJdW7Mt2gppEUOTnO6p2oydgTK9cKNXOYB78uWDuQBIrQLl5I03ARvnIeBwn2HTMqkZW6skgd2U0PC&locale.x=US&Z3JncnB0=

@StarrTile

3 жыл бұрын

All of it dries in 24 hours, but most of it has to cure about 20 days

@jaimevalencia5111

3 жыл бұрын

@@StarrTile Got it, thank you! Keep up the good content. Like watching your videos!

@Trophybearer

7 ай бұрын

If you find the drain is not level at that point then what do you do? Isn’t it too late by that time?

Thank you again! I should be doing my pan tomorrow…..quite nervous but I have learned so much from you! Thank you for being an inspiration!!!!

I’m watching this and following 100% of your instructions I really appreciate people like you posting useful videos on KZread

Thank you for your videos. I live in a house my wife and I bought from a guy in Georgia that owns his own shower and tub installation company, and the shower in this house is purely aesthetic. The wall they built to accommodate it has a three inch lean from bottom to top. Your videos will come in very handy when I’m demolishing it and rebuilding it in the future. Thanks again.

Nice job. As you know, no job is perfect but the difference with you is you take your time and try your best and respect the process. Once your generation of trades are gone, it will be chaos in the construction industry

@mattprombo9691

Жыл бұрын

Thank you for your time and sharing valuable info. I am a transplant to WA state and I can say things are pure chaos due to lack of skill and giving a sh*t. Thank you again for showing proper techniques.

Dude..you are a BOSS at your craft!! Watching you makes me feel like I can do it 😉👍

I appreciate great craftsmanship, great detail. I am doing a shower like this, the info is most needed and very useful, thanks!

Thank you good sir.. l had a dilemma with a doubt and while watching you work,i realized which part of the process wasnt clicking . 💯💯

Thanks this answered a lot of my questions about why a preslope was done. In all my years Ive never seen a shower that didnt leak eventually. Im going to try your method. Makes since.

Been watching your vids for a while now. Thank you for them. I was just going to ask, why pre-slope if u waterproof. U managed to squeeze in the answer just before u started. U Sir make too much sense. Some guys just don’t like change.

Awesome work! thanks for sharing your tricks sir!

I seen different ways to build the shower pan and they build a first one mortar bed with slope before laying down the PVC liner but ,I like to be practical and save time: I like the way you builded this showe, r because ones you installed the PVC liner plus you seal the mortar with red guard ,it will be no problem :good job this is the way I do it , and never have a problem👍

Great to see someone that doesn't preslope. Ive been shieted on for not doing it. I redguard the entire areas before tile so there you go

@handyscapersllc

3 ай бұрын

Just because your redguard before tiling does mean your good to go. Pre slope is a fail safe. So no pre slope, no fail safe.

I always enjoy watching your videos. I esp liked this one being so complete start to finish.

I like the way this guy does it! The rubber liner,plus.

I used to do tile when I was young and install panliners like you're doing we used to pre-slope the pan in other words before you put the pan in you slope it so when you go ahead and put the pan in it's already sloped in case you have any problems the water will always go to the drain and put three pieces of tile on the weep holes and then go ahead and mud it up but I guess everybody's different as long as it doesn't leak you're in good shape.

Nice work as usual Bob!

Thank you for the continued uploading, even with people that try to critique your great work!

Very helpful video. Will try to do same thing in a week

Mr, your work is very good 👍

This vid answered my remaining questions... thanks!

Thanks Bob, the longer the video the better 👊

@StarrTile

4 жыл бұрын

I will keep that in mind going forward, thanks for watching

I like your style, nothing unnecessary, no extra drama, i'm sure you get plenty of over achievers in the comment section telling you how you forgot this or you should of that, Well done!The "No Bullshit" method of doing things!

This is tremendously helpful.

Two questions, how deep is your morter is there a depth for code? And if you have a seat in shower does that need covered with liner overlapping your bottom pan?

I can only donate a small amount of $, because I live on a fixed income. While going in debt to it, I've been "forced to redo our bathroom. Please advise me on 2 things. What about your weep holes in this video? Just to be clear for me, you Redgard the mortar? Finally, I'm using a Quick Pitch and the instructions say I am to set the circular part on top of the flange bolts. So I need to screw the drain cap down a little more to account for that, or just make my mortar bed thicker because of the Quick Pitch? Thanks SO MUCH for putting up some of your craft on KZread. Don't quit. I AM like the other commenter who was puzzled as the amount of your followers. Dude, that's just wrong. You are an artist and should have 10 TIMES that amount! 🤳👍

is it ok to apply a waterproofing membrane before I will install the Oatey pan liner

LOVE your videos and thank you. it looks like you have either mortar, silicone or glue under the drain attached to the floor. IS that correct?

I see you embraced the dry pack . Do you find it more manageable?

When does the screw in drain cap portion get fixed or locked in to a height and what holds it from spinning? Is drain "locked" in at the time of thinset and tile install?

Thanks for sharing this video! It was very helpful for me. One question, should the drain be able to turn once the mortar has hardened? Thanks!

@StarrTile

3 жыл бұрын

Definitely not

Cant thank you enough!!

Amazing job!

Ok my issue is the builder used concrete to put a fiberglass pan in. I removed everything. But now i got concrete bumps making my floor not perfectly flat. Can i slope it UNDER the liner then tile on the liner or no? To chip all this concrete first would ruin the sub floor

I’m doing a shower pan liner. I did a cement preslope already. Now I’m ready to install the liner. The backer board is already up and it was installed all the way to the floor. Can i install the shower pan liner over the backer board wall? Or how do i approach this situation?

hello, I really love your videos you make great to watch. Was wondering if maybe you could give more technical info. I would love to know stuff like how thick the cement needs to be, how to figure out the height of your drain to start and such info like that. Also would love to see or hear at least the stuff to include the sub floor. I am getting ready to do my own shower pan and that stuff I am trying to find. I find the more info I have the better I feel to start my project.

@StarrTile

3 жыл бұрын

This video should answer most of your questions.... kzread.info/dash/bejne/m62nmsSehduypso.html

Basically makes no sense to put a liner without a pre-slope. If there is a leak ( that’s why you put a liner in first place) water will sink down to the liner and just stay there and accumulate and will eventually rise to the tile . It ll never dry up and grout will come off tiles will give off. It just doesn’t make sense from your generally impeccable work ethics. But everything else on this video is Very educational and well thought of and crafted as usual! Thank you.

@StarrTile

Жыл бұрын

I don't believe that a pre-slope works as intended because wicking action with plus 200 lb and mortar will ensure that your pan is wet all the time, that being said nobody does water and water out anymore, surface of the mortar is waterproof which makes the pre-slope a moot and Antiquated issue, but thanks for the comment

So... I have the Plastic curb installed over some 2x2 and filled with mortar... How do I attach the pan liner to the curb? I don't want to staple it... Do I go over the liner with wire mesh and then mud it??

They make a laser level that you said on top of your drain it makes it so much easier

Good video 👍! The pan liner though obsolete now looked great in the corners. That was always the biggest mistake I saw when following a plumber. It's code in my area for the plumber to install the liner. I don't know why though lol. I take them out after inspection anyway

@StarrTile

4 жыл бұрын

Thanks for your comment, yeah I heard that plumbers have to install Liners in some jurisdictionsh...but that becomes an issue if there is a leak later on, who does a homeowner blame, the plumber or the tile guy.... I would rather be responsible for the whole thing personally

How would you do that curve with durock? Do you screw into the liner? I am stuck there.

Are you considering doing more videos like this that show the rest of the shower process? It's very helpful to see the whole process in action from start to finish.

@StarrTile

4 жыл бұрын

Yes...I'm realizing that...late bloomer I suppose.

could not find the green stripe mortar bag at HD. Which type of mortar should i look for at Lowes?

Your just the best!!!!

Brother you do fine work

I want to replace my tub for a walkin shower in a mobile home...will the steps be the same..

Tutorial is nicely done; your usual good work. Three things: 1. Knee pads 2. Caulk on screw heads or overkill? 3. Let's discuss your choice of music during the work session.

@StarrTile

2 жыл бұрын

Thanks 😁✌👌 1. Knee pads bind up in back so I had them. I do have a kiddy float I use on flooring work, slides easy and I've had it for 3-4 years for a buck at the dollar store. 2. Caulk at srew heads overkill. I mud over them and the whole thing is waterproofed. I do caulk the holes I make with ledger boards though. 3. I had a great track on the working portion until 3 days ago when I got a copyright notification, which basically allowed ads to run and the money from the ads would have gone to the artist.... so I literally deleted the music and put on an ad free KZread track...not the best tune but I'll be damned if somebody else gets paid off of my work 😂

Love the music Bob. You make it look easy. Have you got any videos where you install an oatey linear drain?

thank you for your help

I am doing another remodel and have done my own shower pans. I understand why you dont preslope. I do a preslope, then a liner. I know if tiles leak its eventually having issues anyway. My extraordinary measure was using an epoxy grout that sealed the floor extra good. My new project I will use the largest tiles, then the leak issues are less. The mud bed must be absolute in the tile mud or it will crack. I always pull up tiles to insure adhesion contact on a floor.

Thanks for video, what type of screws are you using on liner?

Do you have any videos of you putting up the greenboard? I’m assuming you put greenboard up after this

You do great work!! Do you have a video on installing a linear drain?

@StarrTile

3 жыл бұрын

No I do not, although I have a few videos on linear drain showers , I don't show the process of installing one because they are all built different and all have a different installation method

Why on some projects are a pre-pan installed then a finished pan with the liner sandwiched in between but then on this video, the liner fits directly on your base then a pan formed? My current project has a 6 X 3 pit with a center located drain. Does size dictate one or two pans? Thanks!

@StarrTile

2 жыл бұрын

A pre slope is a thing of the past since everyone waterproofs their shower.

No pebbles around the weep holes?

What if i dont want to put tile and i want to do all concrete for my floor.. can i use all mortar and just slope to the actual drain height? Should i use pebbles for weep holes?

@StarrTile

2 жыл бұрын

Not sure I understand your question, you need to put tile on top of the mortar, not sure how you would just have a Tite-less pan... And no I have never put pebbles at the weep holes, it would basically create a clog more than the mortar sand whatever do, but having said that we waterproof the entirety of the pan now so everything below it is irrelevant

I love your videos. How high off the mortar is the drain sitting? when the mortar is done, I mean.

@StarrTile

3 жыл бұрын

Roughly half an inch or so, just enough room for thinset and tile and for the tile to set slightly above the edge of the drain

Your taste in music is superb I must admit

how do you bend the inside corners of the liner , you cut and beninside the 2x4s? thank you

@StarrTile

Жыл бұрын

Yes you could do that but usually there are double 2x4 in corners where you can't. I just use hospital type folds

Nice job i will do it like that

Great video. Thanks for taking the time.. Do you red guard your mortar bed before you thinset?

@StarrTile

4 жыл бұрын

Yes....entire shower is waterproof before any tile

@mram7715

2 жыл бұрын

Best advise I ever got from Mr startile was you should be totally confident your shower is 💯% waterproof before installing tile.

@BlueOriginAire

Жыл бұрын

@@StarrTile that does go a long way in answering all the pre-slope vs. no-pre-slope questions. The bed of dry mix you set at a 1" drop per foot. ( that is your slope to the drain on all four sides.) Liquid membrane three coats and that rubber skin will last until the new homeowner changes out the outdate tiles. Right ?? All the Walls up To the ceiling should get at least 2 coats of the waterproofing membrane. So, in theory that inside area should be waterpressure proof, if not... hit it with another coat of liquid rubber until it is. This is not rocket science, this is common sense at work. You are worth your weight in GOLD !! No one comes close to your watertight screws and drain area.

Thanks for showing how its don

Very good videos, very practical?? I understand the way you explain the preslope will not help the situation if there are enough water leaked in. I am wondering if the preslope will help when water leaks in over time? If it does, why don't we build the preslope?

@StarrTile

2 жыл бұрын

Because we waterproof the surface nowadays so it is irrelevant, the mortar will never see any moisture

@zhichen2463

2 жыл бұрын

@@StarrTile That is a good reason. How about in the case where the water seep thru from the bottom that is caused by a clogged drain. So the water get to the bottom of the mud. In this case, will the preslope help to drain any excess water - assuming the whole mud bottom already saturated with the backed up water. I understand this scenario does happen often, otherwise, there is a bigger problem need to be deal with, but when this happens, the ability to drain any excessive water will help, I would think.

Do you need a pan liner if you're building a shower on concrete and not over wood?

@StarrTile

3 жыл бұрын

Yes definitely, although the waterproofing membrane can be used in place of a pan liner like Redguard or aquadefense

So I’ve been told to use pea gravel around the weep holes on the drain so no mortar can get into them and clog them. Thoughts??

@StarrTile

9 ай бұрын

We are not doing water in water out system anymore so because we are waterproofing the entirety of the pan surface the weep holes would never kick in, having said that it doesn't make any sense to do an extremely porous product which would be Pebbles instead of a less porous product which would be your sand mix, this might take

I enjoy your videos MUCH! How thick do you suggest that the pan should be?

@StarrTile

3 жыл бұрын

At least an inch to 1 1/2" at the drain and then incrementally whatever the quarter inch per foot is to the perimeter

@StarrTile

3 жыл бұрын

And by the way, thanks for your donations, much appreciated 👍👌

I attach my liner using Staples. Are they ok to use?

@StarrTile

4 жыл бұрын

Absolutely... but given the choice between that and screws why not choose the screws

Do we need a pre-slope bed before the shower liner goes in

@StarrTile

3 жыл бұрын

I don't do pre slopes... if you wanted to no harm no foul but if you were waterproofing the pan surface then it wouldn't make any difference

Cool vid, love the audio tracks! 😎

Does the mortar have sand. I have mortar and was told it needed to have sand added

@StarrTile

3 жыл бұрын

Mortar is cement and sand, you can't have mortar without both of those.. Only reason that you would need sand is that you bought cement

2 sponges worth of water sounds less than recomend on bag? Just trying to understand your method it seems more like playing sand than mortar. Is that easier?

@StarrTile

4 жыл бұрын

The only reaaon I mentioned 2 sponges full because people want to know what thickness their mortar should be and that always works for me, I suppose you could get a measuring cup and do it by the book but I don't

I have viewed many of your u tube video's in regards to shower pan liner / mortar. While you install one bed of mortar, some other guys do two. What is the benefit of doing it twice? I am going to use your method. Curious???

@howtodoitdude1662

2 жыл бұрын

Two beds is unnecessary. Who started this trend, I don’t know? The liner is to waterproof the subfloor, not for drainage.

Question. wouldn't put the durock before the mud?

@DavidSmith-tw7bw

2 жыл бұрын

No, never ever. It’s an overlapping system bottom then sides. Installing Durock first leaves a crack around edges for water to penetrate.

@StarrTile where do I get the black bin to mix the mortar?

@StarrTile

2 жыл бұрын

Home Depot

@octagram8099

2 жыл бұрын

@@StarrTile Thanks.

I like your video but it would be helpful if you gave a running commentary on what you are doing rather than the loud music. The one question I have is what type of calking did you use around the drain flange. Is it normal silicone or is it butyl calking. Thanks for all the information, it’s really helpful.

Beauty vids brother i got one question, once i get the liner in, the final spin on peice of the drain, after i set the height, I just slap down the mortar? Thanks

@StarrTile

2 жыл бұрын

Yes and do the best you can do firmly pack it around the neck of the drain

@ikeavaughan

2 жыл бұрын

@@StarrTile awesome thanks for the response!

Love the soundtrack! Hahaha 😀😂🤣

Great videos Bob Thank You, Question, could you just use RedGuard as a pan liner? Maybe 3 or 4 coats and then use another 3 coats of RedGuard on top of your Mud. Thanks

@StarrTile

3 жыл бұрын

Yes, Redgard allows for their product to the pan liner. I don't know the mil thickness they are looking for but 3-4 coats would do the trick. Having said that, because I have a customer base answer to I would not attempt it personally and instead use kerdi..which I have on many occasions for curbless showers on a slab.

@estephenchavez9577

2 жыл бұрын

I just had to throw in my two cents when I read this question.. if I understand your question correctly you want to possibly do away with the ~$30 shower membrane and put several layers of red guard which would cost over a hundred dollars easy. Why would someone want to go that route?

@garrypieroni8038

2 жыл бұрын

@@estephenchavez9577 I've never installed a rubber liner ( if thats what your talking about) and I don't like the way inside corners make wall board bump out. Red Guard is a bit pricy @ $150.00, 3 gal pail but I'm using on walls anyway, so I use as a pan liner also. I did call Custom Blend Tec support and got the OK. I can usually do 2 showers with 1 pail and the home owner pays for material anyway. That's my 2 cents. Peace my fellow Tile Contractor.

@estephenchavez9577

2 жыл бұрын

@@garrypieroni8038 yes I was talking about the plastic liner... my thinking is using a shower liner would be more cost effective and quicker than red guard but if youve had positive results I can't knock it

Thank you sir.

Do you have any opinions on pre slope. I’ve always used them but wonder what you do to combat standing water in the pan?

@StarrTile

Жыл бұрын

I don't believe that a pre-slope works as intended because wicking action, having said that everybody waterproofs the pan surface nowadays so it doesn't matter

@Mikepopo99

Жыл бұрын

@@StarrTile but if you do a pan liner and mud isn't throwing a waterproofing over it a bad thing? Aren't you basically trapping water in between?

@StarrTile

Жыл бұрын

@Mikepopo99 the pan liner is not necessary, I still do 1 because habits die hard... but the motar bad should be fully dry and cured before waterproofing the surface, therefore you cannot have moisture in between the two, unless of course you're doing it wrong. I prefer to use a liquid topical membrane like Redguard or aquadefense whereas other tile guys are using some type of membrane like Kerdi, a cloth membrane with tape at the seams, etc etc, either way it's done it is a sealed system once again makes the whole notion of a pre-slope irrelevant

Hi ,how long do I have to wait for the mortar mix to dry so I can go to the next step? I heard you said 3 days,is that right?

@StarrTile

3 жыл бұрын

3 days minimum...longer if possible, 15 days

@mitas258

3 жыл бұрын

@@StarrTile gracias 🙂 Just making sure cause everyone else in other videos just wait 24 hours , But thanks very much for your videos Están buenísimos 👏

Do you waterproof over the dry pack?

@StarrTile

2 жыл бұрын

Yes

Great video! How do you then attach tile to the outside of the step where there is rubber liner but not the mortar?

@StarrTile

2 жыл бұрын

The step...or curb as it's called... is wrapped with backer board, muded and waterproofed then tiled

好极了,谢谢

Good Job -- :) I send you like..

Do you lay floor tile next before wall board?

@StarrTile

Жыл бұрын

Yes

Liner over plywood? Do you ever build a thin cement base first, then the liner, then water test, then the second layer of cement, then waterproof and then tile?

@StarrTile

Жыл бұрын

No, I don't do any of that stuff you're talking about, just how you see it in the video

How about the weep holes? Some people they put pebbles??

@StarrTile

2 жыл бұрын

It doesn't matter anymore if you waterproof the surface of your shower pan which I highly recommend then the weep holes and pre slope and all that garbage don't matter

Inspectors here in Oregon will fail my pan liners if they are not presloped. You are lucky you don't have to do this extra step makes it easier to install the liner. I also put some kinda of shim on the outside top part of the curb so the liner slopes into the shower area. Looks like it will hold water to me. Might want to protect the sides up the curb wall extra protection never hurts. Would like to see how you do the curb part. Do you use wire mesh over the curb and mud set it?

@StarrTile

3 жыл бұрын

Everybody needs to get off of the whole pre-slope thing because if you waterproof your surface which everyone that I know does, then the pre slope would never kick in any way

@Akadamsinc

3 жыл бұрын

That would be nice. When I do a large shower I got to wait for the preslope to dry before laying the liner.. PITA unless I put a board down on the liner so I don't mess up the slope..

@msavage138

Жыл бұрын

It's because after a while soap, shampoo, and body oils mess with the pan waterproof membrane. At that point, water penetrates the mortar and sits stagnant on a non-presloped liner.

@StarrTile

Жыл бұрын

@msavage138 That sounds like BS, show me proof of that

@Stevelemontrudy

8 ай бұрын

@@StarrTile Then why bother to put in a pan liner at all?

Did you preslope under the liner?

@StarrTile

2 жыл бұрын

Nope

Without measurements how can you be sure you got the 1/4 per foot slope?

Do you need Hardy board On the floor 1st

@StarrTile

2 жыл бұрын

No

I've seen now people do not put in a liner at all because as you also mention here, you do not put a preslope and I did not see pepples around the weeping holes so the liner appears to be redundant. If waterproofed with red guard or the orange schluter along with an epoxy grout, I do not see the need for the liner anymore. Your thoughts on this?

@StarrTile

2 жыл бұрын

Yes, everything you said is true

@howtodoitdude1662

2 жыл бұрын

A liner is to protect the subfloor from water damage not for drainage.

Do you even need a shower pan liner if you waterproof the pan surface? I guess its just another layer of protection!?

@StarrTile

4 жыл бұрын

Redgard allows for their product to be a pan liner with a certain mil thickness, but I don't really want to try that on a customer, so doing a liner and the waterproofer as you mentioned is ensurity

Great video. Lots of comments on preslope or why not here. The subfloor should be very very close to level 1st and foremost, wood or concrete slab. If not this is where you create a pre slope or use floor leveler or level up a plywood sub floor. The pan liner gives the wood sub floor some protection against water all over it if water gets past the grout and the entire mortar bed becomes soaked 101%. You're then hoping water goes to the drain as path of least resistance. You've got a big fail when this happens. My question is why is the mud bed so thick?

This is your best video ever you did not do that much talking 😂😂👍

tried to donate said it expired can I send pictures or video to ask a question?

@StarrTile

3 жыл бұрын

If the link did not work you can go to my main Channel and there is a tab that says about, scroll down to the bottom and there should be a PayPal link, if not you can easily find me on PayPal with my number, my name, or my email. After you donate you can leave your number and I will contact you, we can go forward from there

Great Video Bob. Do you have an opinion on the GOOF PROOF Quick Pitch system?

@StarrTile

3 жыл бұрын

Yes I think it's a great product for a homeowner to use, it would take me too long to set up because I don't need that product but I will be making a mock-up demo video very soon exactly that

@johnzamostny8188

3 жыл бұрын

@@StarrTile Thank you. Im learning a ton from your videos

GREAT !!. DO IT RIGHT.

That was worth it just for the music. Serious question: Is that mortar bed strong enough to use without tile? What if you just painted it with something like waterproof epoxy paint? Never much liked tile and it's such a bother.