When I'm sick of TV I rewatch your videos

@OutFishing13Matthew

6 ай бұрын

thanks, dude.

You are by far the best that I've seen of step by step, on zebco reels, if it weren't, for you, I would be out so much money, buying new zebco reels? So Thank you 🙏🏿

@OutFishing13Matthew

2 жыл бұрын

You are welcome. Glad I can help you keep those old reels in usable condition. Thanks for commenting.

Matthew, thanks for the great videos!!! I’ve upgraded & serviced a few of my zebcos with great success. Keep up the awesome work. We appreciate you!

@OutFishing13Matthew

3 жыл бұрын

Glad I can help.

Zebco Bullet Favorite Reel Thanks! For The Help on Keeping It Working Properly!👍🎣

@OutFishing13Matthew

Жыл бұрын

YW. Thanks for commenting and watchings

I have never seen one of these opened up before. I'm pretty impressed with it. 👍🏻😎

@OutFishing13Matthew

3 жыл бұрын

You and me both! This is a well built reel. There are some weak points though. For example, the metal shield on the button can slip to one side and get stuck in the gear. Also, with a lot of use the rubber button will start to wear down and the plastic hinge can break. Other than that is is nice!

@j.t.cooper2963

3 жыл бұрын

@@OutFishing13Matthew Good to know. 👍🏻 Thanks.

Great video Matthew! Question: Do any of the Bullet parts interchange with the 33? I have a 33 Platinum and it's the best reel I've ever had, but this Bullet really looks like quite a reel.

@OutFishing13Matthew

3 жыл бұрын

No, none of the parts will interchange

Shout out to Matthew hope you are doing well and enjoying life! Hey what's your best web site for buying Zebco part's? Remember your always welcome here in East Tennessee ! God bless !

@OutFishing13Matthew

2 жыл бұрын

The best place to get reel parts for a Zebco is Zebco.com. They will carry all the new parts you need. For older parts? That is a callenge. You can try www.mikesreelrepair.com/, however, they are in Canada and you'll pay high shipping costs and they may not have the part you need. Ebay is a good place to try as well. I wish TackleServices were still up, but it got canceled. :(

@mikemason389

2 жыл бұрын

Thank you Matthew! Keep up the great videos very educational and your a great hands on instructor!

@OutFishing13Matthew

2 жыл бұрын

@@mikemason389 Thanks for the compliment!

Hi Matthew got the two new video,s I don,t say what I think about this Reel !!

@OutFishing13Matthew

3 жыл бұрын

Thank you for watching.

Hey! Great video! I wonder if you have any tips on how to clean the drag system? On my bullet it is very uneven and I can not find what is wrong with it.

@OutFishing13Matthew

3 жыл бұрын

Unfortunately the drag on a bullet cannot be taken apart . About the best thing you can do is get some oil down into the washers. Or replace the draft assembly

Ok, very good video!! Mine the antireverse is not working. Any tips? I took it all the way down, cleaned and reassembled. Still dies not work.

@OutFishing13Matthew

Ай бұрын

Do you have a Bullet? The AR is called a roller clutch and has 6 little roller roller bearing (they look like little round rods). Inspect that. It is possible those roller bearings are either missing or so gummed up they are not working. The part number is AN112-02. Call Zebco.com and order a new one and replace it and your reel will be back in business. Ask them to email you a Schematic for the ZB3.

do you have a picture of what an AR CLUTCH is? Thanks. Other than that the reel is super smooth now

@OutFishing13Matthew

Жыл бұрын

No, sorry. But look at 11:05 in this video for the AR clutch. It is a little roller bearing that spins one way, but not the other.

👍👍👍

@OutFishing13Matthew

Жыл бұрын

Thanks for watching!

Brand new to your channel. My bullet is from early 90’s and doesn’t look like yours. Mine says 38 bullet and it’s all black. Is it the same type of reel? Also what is the red grease?

@OutFishing13Matthew

Жыл бұрын

No, It isn't the same type of reel. There was a line of sleek reels that Zebco made call "Bullets". back in the 1990's. Zebco made a 357, 38 and a 22. Just a new design and about the same as a 33. The new Bullet that Zebco now makes is a very high end reel. All metal, 8 ball bearings, high speed and over $100 retail price tag.

Thanks for the video. How can I get a spare spool for my zebco bullet 30

@OutFishing13Matthew

5 ай бұрын

You might find one on ebay. Or contact Zebco

Good afternoon Sir, I've watched your video a couple of times. I have an issue with my Zebco Bullet, the drag, even when set up to the max still allows line to come out. Is there a way to get the drag to tight dead the line? I noticed that since I purchased the reel new, i don't know if it is defective or is just the way the reel is, i own several Zebcos and all of them give the option to get the drag tight enough to the point where no line would come out. I've lost decent size fish due to this issue, even when the fish are tired, I cannot get them close enough to the kayak. Thank you in advance for your assistance!! Cesar

@OutFishing13Matthew

Жыл бұрын

It is possible the drag system has failed. Contact Zebco and report the problem. You can replace the drag assembly or they may replace the reel.

Do you have a video of you replacing the button and the rotor?

@OutFishing13Matthew

4 ай бұрын

Yes.

Is there anywhere you can get the rubber cover for the thumb button; wears out really quick.

@OutFishing13Matthew

2 жыл бұрын

Unfortunately due to a company change, tackleservice.com and parts ordering online will no longer be supported. For parts, call Zebco at 1-800-588-9030 and they will be happy to help you. I have the part number you need. Do you have the original schematics and part number? Here it is: Part number: AN109-01 27B Thumb Button. See my other video on how to replace the rubber thumb button kzread.info/dash/bejne/oHajt89-kpmrYZc.html

hi there, my zebco bullet is brand new but not releasing the line efficiently when i press the rubber release button. i would not be competent enough to take it a apart like you did so well ;-)

@OutFishing13Matthew

2 жыл бұрын

It may have a problem with the push button. There is a metal piece that protects the plastic part. It may be bent out of the way. See if you can find a reel service center that can help you.

Just bought one,caught a fish gears started slipping the little brass screw was loose so backlash is out, ? How do you set the backlash on the gears.one other thing would white lithium grease be ok

@OutFishing13Matthew

2 жыл бұрын

See this video. That little brass adjuster on the right side should be screwed in until you feel the gear getting tight and then back off a little. Watch this video to see if this helps. kzread.info/dash/bejne/fIqlrcN_YLunhLw.html

My wife loves her bullet She bought 2 more used ones. But we need a video on the bullet size 20. Can't find any info on how to service it

@OutFishing13Matthew

9 ай бұрын

I need to get one of those. I am guessing the procedure is nearly exactly the same. Or are you seeing some differences?

@scottnicholson408

9 ай бұрын

@@OutFishing13Matthew The spinner head looks different and can't figure how to comes off.

I can't get my top to pop right off like you did. I'm holding my handle and turning the top in the intended direction the top is only popping. I think I damaged the reel....

@OutFishing13Matthew

2 жыл бұрын

I have see this happen twice before. Make sure the reel is not cocked and try again. If you cannot get the spinner cone off you will need to contact Zebco customer support and return the reel. It cannot be serviced when the cap cannot come off. They will replace the reel.

Hey Mr. Matt! Just ordered a Zebco Bullet on Amazon! They were on sale for $75. There was several models to order and mine had the specific connotation “2017”. Could you shed some light on what that means? The newer models were $99

@OutFishing13Matthew

2 жыл бұрын

The ones on sale are were introduced around 2017. They are made with an aluminum body and front cone and rear cover. The new ones for 2022 are made from manganese and are just slightly lighter. It is called the Bullet MG. 10.9 oz vs 13.9 oz. Looks like the Bullet MG is a $140.

So we could use Dawn in water to clean the reels?

@OutFishing13Matthew

Жыл бұрын

Dawn works great! Just dry it overnight after rinsing and your reel is ready to go back together.

OK thanks anyway Matthew

@OutFishing13Matthew

3 жыл бұрын

Any time. Hope you find a good used one.

Is it true it reels in 29 inches of line with each revolution of the handle

@OutFishing13Matthew

3 жыл бұрын

Yes. It is printed right on the handle. It is FAST!

L love your videos, but I do have a question. I have a bullet and it works great until I put the center head on, at that point the center head seems to be hitting on the spool, do you know how I can fix it!

@OutFishing13Matthew

10 ай бұрын

Let me make sure I understand. Are you saying the Spinner Cone Assembly (center head) is rubbing against the spool when you use it? Or is something rubbing against the front cover?

@brianhartmuller600

10 ай бұрын

That seems to be the issue

@brianhartmuller600

10 ай бұрын

The front cover does not effect the rubbing only the center head

@OutFishing13Matthew

10 ай бұрын

​@@brianhartmuller600 It sounds like the spinner cone assembly has gotten bent and is not turning perfect true and centered. You can order a new one but they are about $40 each. I suggest you take off the front cover and the spinner cone and then the spool. Then put the spinner cone back on. Turn your reel very slowly and see if you can figure out where is it out of balance. Perhaps have someone hold a pencil up close to the spinner cone lip and see what side touches the pencil as you slowly turn it. Then tweak it to one side (away from where it touched the pencil) and see if you can get it centered again. That would solve the issue.

Couldn't you take those rivets out and replace them with bolts and sleeves or re-rivet them?

@OutFishing13Matthew

4 ай бұрын

You are talking about the drag? I have thought about that. It would be interesting to try.

@luigiprovencher8888

4 ай бұрын

@@OutFishing13Matthew Yeah. Or use standoffs from PC's.

Hey, my reel is turning backwards since I cleaned it. Do you know why this is happening?

@OutFishing13Matthew

Жыл бұрын

Did you put the AR clutch in the wrong way? That would do it.

@alfredsartwell5659

Жыл бұрын

@@OutFishing13Matthew do you have a picture of what that is? Thanks. Other than that the reel is super smooth now

Question: where do you purchase your parts from?

@OutFishing13Matthew

3 жыл бұрын

Www.tackleservice.com

Nice Video Thanks. DO you know where I can get a parts list?

@OutFishing13Matthew

2 жыл бұрын

If you email Zebco and provide your model number, they will send you a schematic.

@armandfusco6482

2 жыл бұрын

@@OutFishing13Matthew Thank you

@OutFishing13Matthew

2 жыл бұрын

@@armandfusco6482 Good luck.

Just watched your video on zebco 202. I have the same one but the cast button doesn’t work. All the parts are there. What am I missing.. Steve

@stephenlongenberger9279

3 жыл бұрын

Forgot to mention this reel was sold by bass pro and has my daughters name on the reel and is about 25 years old and trying to restore it for my grand daughter

@OutFishing13Matthew

3 жыл бұрын

Generally that means that something is gummed up on the pinion shaft. Either the shaft itself is gummed up in the frame or the pinion gear that slides on the pinion shaft.

@OutFishing13Matthew

3 жыл бұрын

That is a pretty special reel then! I am sure you will get it going again.

I have a question,my drag is not tightening,what could that be?

@OutFishing13Matthew

2 жыл бұрын

Hard to say. It could be a broken drag gear. Have you taken the front off to inspect the drag? Call Zebco

After I cleaned my zebco bullet the drag wheel doesn’t seem to tighten the line. Any solutions or tips?

@OutFishing13Matthew

2 жыл бұрын

The drag system on those is all one part. So I am a little puzzled where something went wrong. My only recommendation is to take the front apart again and make sure everything is put back together right. Something is missing. Is the spool locked in place correctly?

@thomasmontgomery5292

2 жыл бұрын

@@OutFishing13Matthew just took it apart again nothing is missing spool was locked but the drag reel still spins and never tightens or loosens the line 😕

@OutFishing13Matthew

2 жыл бұрын

@@thomasmontgomery5292 I am puzzled. Send me an email to outfishingthirteen@gmail.com. let me see some photos of the drag system.

Would you recommend this reel over the Omega Pro?

@OutFishing13Matthew

2 жыл бұрын

They are two different reels and both very nice. Do you want a faster retrieve? If so, get the Bullet. If you are okay with a moderate retrieve the Omega is perfect

@NaturalFork

2 жыл бұрын

@@OutFishing13Matthew Thanks!

there's no way i can diassemble my bullet or omega , do you service and repair reels for people ? how much does it cost to service one reel and how does one pay you

@OutFishing13Matthew

3 жыл бұрын

Occasionally. See my ABOUT page and send me an email.

@toddedwards7909

3 жыл бұрын

yeah im wondering what you charge to clean and service several zebcos

@OutFishing13Matthew

3 жыл бұрын

@@toddedwards7909 send me an email at marblegems@gmail.com

@OutFishing13Matthew

3 жыл бұрын

@@toddedwards7909 I can do that, but it is generally a custom quote since it just depends on the reels. Contact me at MarbleGems@gmail.com You pay for shipping and return shipping.

So…. I own a Bullet and an Omega Pro zo3. When the drag engages and line "drags out” on the Omega, it makes a satisfying "clicking" sound. The Bullet drag is silent. What’s up with that?

@OutFishing13Matthew

3 жыл бұрын

There is a clicker on the spool drag system, check that it isn't bent down to far or gummed up with grease. Also, make sure you don't have any grease on the back of your spool. See the video at about 3:45 to 4:30 for a clear picture of the drag assembly. You can hear the clicker working on mine at around 24:10.

@billwendry

3 жыл бұрын

Thanks for responding so quickly! I checked the clicker and found it was broken. Since it was an Amazon purchase, I have initiated a return for replacement. By the way, I really enjoy your videos…. Keep up the good work!

@OutFishing13Matthew

3 жыл бұрын

@@billwendry that is good you can do that. The drag assembly is just one part on that reel. It isn't to expensive on tackle service. Glad you like the videos. I am trying to do weekly videos now. And also more modern reels as often as I can buy them.

Sir, where can I get parts for my bullet? I've been searching for days for an anti reverse bearing

@OutFishing13Matthew

Жыл бұрын

Contact Zebco.com and look for the customer service number. Call or email them. More than likely they will send you an AR clutch for free.

@larrygeorge5727

Жыл бұрын

Thank you. I did contact Zebco. They didn't have the bearing so they told me to send in my reel and they will send me a new one. She said the reel is so new that they would like to keep mine for studies.thank you.

@OutFishing13Matthew

Жыл бұрын

@@larrygeorge5727 NICE!

Good morning Matthew, tell me do you have a Zebco Bullet that you mint want to sell??

@OutFishing13Matthew

3 жыл бұрын

Sorry, I dont. Thanks for asking though.

My anti reverse is not working

@OutFishing13Matthew

Жыл бұрын

That is a drag. See me other response to your question. Good luck with your repair.

Matthew, don't think I want to chance to buy this Reel from anyone I don't know because of the price to over hall the Reel

@OutFishing13Matthew

3 жыл бұрын

Good point. All of the parts are expensive. The new 33 Platinum is fast and cost about $34 at Walmart.

@loucifer323

3 жыл бұрын

@@OutFishing13Matthew If you can't afford the Bullet or Omega Pro the Zebco 33 is a excellent reel the drag on this reel is just as good as the other two reels actually I like the sound of the drag better than the other two and all fisherman worth their weight in lures knows the sound of a drag screaming is like sex to us, I got lucky and Walmart had this reel marked down to 5 dollars so I bought the last two, but if you have the money the bullet is fine piece of machinery if not the 33 will serve you well

@OutFishing13Matthew

3 жыл бұрын

yup, the 33 is a very nice reel.

that looks like a real pain, ill stick with 33s

@OutFishing13Matthew

Жыл бұрын

I understand. It is a great reel, but is more complex.

Broke my bullet mg by turning the spinner head the wrong way now it wont come out just clicks when I turn it left so i guess is broken inside sucks Really liked this reel

@OutFishing13Matthew

Жыл бұрын

Contact Zebco.com. Send them your old reel and they will send you a new one. That is NOT supposed to happen.

@uuulaalaa

Жыл бұрын

@@OutFishing13Matthew thank you was thinking on contacting them hasn't been a year yet since i purchased it from bass pro shop when they came out so i hope i get a response from them thanks

lots of parts inside that reel.

@OutFishing13Matthew

3 жыл бұрын

True. A lot more than your regular Zebco 33. But not as many as others. It can still be a little intimidating at first. I started videoing taking reels apart just so I knew how to put them back together.