I just followed your video and serviced mine. Due to elections wahala and lack of cash wahala in NIGERIA, I had no choice but to do it myself without the usual mechanic I call. I learnt a lot about how the gen really works. I cleaned all parts and the happiest was when a generator that wouldn’t start and hasn’t worked for 8 months started the moment I pulled it once. Thank you for this video.

@jaywealthmechanics9285

Жыл бұрын

You’re welcome 😊

This is more than the normal service ... it is what I call a full decoke where you have removed the carbon buildup. Most people won’t go this far but will only clean the carburettor. Well done!

@jaywealthmechanics9285

3 жыл бұрын

Thank you sir 🤗🤗

You really stand out with your intro. I love how you follow it step by step. I am subscribed.

@jaywealthmechanics9285

2 жыл бұрын

Thanks 😊

Bravo. Your video was helpful.

@jaywealthmechanics9285

Жыл бұрын

Thanks 😊

You've really done well bro👍👍

Helpful

@jaywealthmechanics9285

3 жыл бұрын

Thanks for watching🤗🤗

You have done really well. But kindly explain the dos and don't of the process well for we little beginner.

@jaywealthmechanics9285

3 жыл бұрын

Thank you.. watch out for the part 2. It will be well explain for beginners.

Nice

@jaywealthmechanics9285

3 жыл бұрын

Thank you 🤗🤗

Good job 👍❤️🇸🇾🤍

@jaywealthmechanics9285

Жыл бұрын

Thanks

I think i can do this but why won't I allow my Mechanic eat when he'll do it for just 1.5k NGN 😂. Weldone bro

@jaywealthmechanics9285

10 ай бұрын

Lol 😂. You are welcome

Hello from Australia. Nice job. The same machines here with two diffent names are GMC and Blackridge. Where did you buy the piston and rings kit from? I can't find any on ebay etc. Can you put the shop link in the video description please.

@jaywealthmechanics9285

Жыл бұрын

I bought mine in my country Nigeria.. It can be export to you.. if you want it in bulk

Thanks for ur video, pls My small tiger gen is consuming so much fuel, what do I do to make it less consumption

@jaywealthmechanics9285

3 жыл бұрын

Firstly the more the load the more it consume fuel. Check the home appliance you put on.. secondly the carburetor needs to be service or replace.

Please explain how to check the ignitor system. I'm not getting the spark on the plug. Same Tiger model what you have serviced. Thank you 😊

@jaywealthmechanics9285

2 жыл бұрын

You can check by putting screw driver into the plug cap, take it close to the body of the engine. then you drag the generator. If there is spark that means the ignition system is good. If it doesn't spark the ignition system is bad.

When you look at that piston very well you will see the two .. in that piston . Please I want to the meaning of that two .. please

@jaywealthmechanics9285

Жыл бұрын

I don’t understand your question

People I can see that the generator sounded before it was dragged, is something not weird about that

He is so fast repair that generator

Nice video man. My thermocol generator consumes alot of oil. I have to change or add more about 3 times a week, what could be the cause?

@jaywealthmechanics9285

2 жыл бұрын

Thanks.. the generator needs overhauling.

What might be the course

How much is piston and carbrator

@jaywealthmechanics9285

Жыл бұрын

Yamaha piston is #700 carburetor #1800

Camera man mabok

Thanks for ur videos! Pls my tiger gen is doing hard starting, it starts after i kicked like 4 to 5 times, what's the cause bro? Secondly! If the fuel is finishing, the voltage becomes so high thereby damaging some gadgets for me and then go off within 1 minute. What's the cause pls? I need ur answers

@martinschukwudi1746

3 жыл бұрын

Please I need ur answer on this

@jaywealthmechanics9285

3 жыл бұрын

Firstly check whether the spark plugs is good. Secondly if the Piston and rings is bad, it cause hard starting. Lastly the ignition coil also cause hard start when it fail to supply current to the plug.

My tiger gen is leaking oil badly, how can I trace where the oil is coming from? Oil is always filled on the floor after usage

@jaywealthmechanics9285

Жыл бұрын

What kind of oil. Black oil or clean oil.

@martinschukwudi1746

Жыл бұрын

@@jaywealthmechanics9285 clean oil, but not too clean

@jaywealthmechanics9285

Жыл бұрын

@@martinschukwudi1746 check the oil seal from the starter side. Whether it has pull out.

Please I follow the instructions and I service the generator... But he didn't work and besides the generator was working before I service it.. But when i start the generator, I noticed it was free but until now it did not work... I need help bro...

@jaywealthmechanics9285

Жыл бұрын

Hope you didn’t break the rings in the process of inserting the engine block. Secondly Check the cylinder packing and block packing if there is no leakage.

@xyengineeringandtechnology8497

10 ай бұрын

Lol. You should have just given a Mechanic 2k 😅. Sorry about that

What of after this the generator refused to start what is the problem again

@jaywealthmechanics9285

3 жыл бұрын

Firstly Check the plug whether is good or not. Secondly check whether is leaking pressure

When can one change the piston? What happens to the gen before u can change the piston

@jaywealthmechanics9285

3 жыл бұрын

Firstly, Piston can change When engine oil is not well mix in the generator where by it affect the piston. Secondly it can be change when rings is gum and stick to the piston.

@martinschukwudi1746

3 жыл бұрын

@@jaywealthmechanics9285 thanks a lot

@jaywealthmechanics9285

3 жыл бұрын

You're welcome 🤗

My didn't start after this

@jaywealthmechanics9285

Жыл бұрын

Watch the video again