Thanks for the help! I finally purchased my second stereo pedal and didn’t know how to connect it with my current setup, thanks for your help! I really appreciate it 🙌🏻

Best stereo pedal explained I could find thank you. I certainly have a problem it all started with my boss super chorus b output now I understand what it's for and how to utilize it thank you!!

Wow! I just happened to stumble upon your pedalboard tips #6 and man, I think I'm ditching my drive pedals now to focus on a stereo rig, particularly an ambient setup. The difference between mono and stereo is just massive! Right now I only have the gfi clockword delay v2 and a marshall reflector reverb, and I hope that could work out fine. Now it's time to get a 2nd amp. Thanks a bunch sir for the eye opener :)

This video is perfect timing for me. I am starting to build my first stereo pedalboard.

@AntoineMichaudGuitar

7 жыл бұрын

Great minds think alike ;)

I said in the video I would put a link to learn more about stereo splitting, but KZread doesn't allow End screens and Annotations at the same time, so here is the link: Pedalboard Tips #4 - To learn more about stereo splitting: kzread.info/dash/bejne/jKyK2c2tadfSZ6Q.html

@mattgilbert7347

7 жыл бұрын

Have you done a video just on wet/dry? I really want to run my amps in a wet/dry setup using my Boss ES-5 but it's a mono looper, and I don't know how to do it.

@slickcross

6 жыл бұрын

Bro...why dont you just get a switching system like the Boss ES-8 or the gig rig g2?

@michaelcraig9449

6 жыл бұрын

What is the difference in wet/dry and stereo set up?

Very helpful information about using a splitter cable into the following stereo pedal. Thanks!

@AntoineMichaudGuitar

6 жыл бұрын

Thanks for watching!

Thank you for explaining this so clearly. I also appreciate the link to that splitter. Stereo splitting cables can be confusing.

Thank you so much for the good stereo advises!

Such a clearly explained video, thanks!

@AntoineMichaudGuitar

2 жыл бұрын

Glad it was helpful :-)

merci de prendre le temps d'articuler tu me sauves la vie xx

Man, you're super helpful! Thanks a bunch!

This was very helpful. Thank you. 🙌👍

That was great. Good job!

Very informative video mate! Thank you for this..

@AntoineMichaudGuitar

7 жыл бұрын

No problem :)

Very clear and helpful, thank you!!!

@AntoineMichaudGuitar

2 жыл бұрын

My pleasure!

Excellent, thanks!

This was very helpful

I use a Radial Twin City to split the signal at the end of the board. Works extremely well and no issues with grounding/phase., etc.

Thanks bro. Helpful.

Great video!!

Seeing the perspectives of other entrepreneurs always sparks an inner fire in me, keep on hustling! 🚀

Thanks a MILLION Dude

@AntoineMichaudGuitar

Жыл бұрын

My pleasure 😊

a very thorough how to

Thank you! 🙏

Thank you very much for this video! I am new to effects pedals so mine are all basic with only 1 input and 1 output and they are all at the front of the amp. I used the black and red splitter from the output of the last pedal in the chain and then connected the 2 cables to 2 amps. I just kept both amps on a clean setting and I got a much fuller sound than I do with just 1 amp. Now I can experiment with different amp settings and maybe placing an effect or 2 after the split so it just goes to 1 amp. Thanks!

@AntoineMichaudGuitar

7 жыл бұрын

Unlimited possibilities from now on :) Stay tuned on my channel as I will talk more about it in the future. Because stereo can mean having other issues like phase problems between both amps. This is the basics, but I will try to cover as much as I can in future episodes! Thanks James!

@JamesJohnson-hb1me

7 жыл бұрын

Yes, I will stay tuned! And I forgot to mention earlier that I subscribed to your channel. I like your videos! Thank you very much for posting.

@AntoineMichaudGuitar

7 жыл бұрын

Thanks for subscribing!

Awesome!

you saved my life.

Nice an helpful videolesson, Antoine! BUT: You SHOULD run your signals from your last stereo pedal through an isolated ABY splitter to avoid hum and posible frequency cancellation (reduced signal over some frequencies). It also might be hazardous without an isolated splitter if your gear is not proberly grounded. The splitter must therefore be equipped with electrical isolated outputs like the Lehle Little Dual ABY splitter or others. A low cost splitter like i.e. the FenderABY is only equipped with a simple contact switcher and is not reccomendable in my opinion.

Thanks!

For the last exemple, the solution is very simple if you want to keep the mono term at the end;A/B box (Morley for exemple). You get in mono and you have two outputs: A for amp 1 B for amp 2.

@AntoineMichaudGuitar

7 жыл бұрын

Thanks for the good example! My goal with this video was to get the most simple I could to explain this to beginners. I see a lot of you know how to go deeper into it! I doubt someone who is new to stereo pedalboard would like to use an A/B box, programmable loop pedals, MIDI synchronisation. But clearly, that's really nice to see some other solutions in the comment section, I like it, keep them coming :)

@mrsnakepit

Жыл бұрын

So bro, we need 2 guitar amps for this stereo set up? 😮

@joanarling

11 ай бұрын

@@mrsnakepit Yes. Same goes for HiFi-sets, only they mostly have two amps in one chassis.

Great explanation. I'll be your newest subscriber! :)

Good video

Merci pour ton vidéo!!! A partir du moment que tu as des pédales stéréo tu dois absolument brancher les deux sorties…j’ai la boss rv6 au milieu de mon board suivie d’une pedal mono et je fini avec mon delay qui à deux output…

Here's my recommendation. Do everything pre-amp in mono, then put everything post-amp through as few boxes as possible. There are some great multi-effects boxes with delay, chorus, flanging, phasing, tremolo etc. all there in one box. I don't use pedals for that sort of thing. I use a Line 6 multi-effects unit, but there are plenty of options. It makes things sooooo much simpler. You can have preset configurations that you can recall with a single button, and it can go directly into a PA or computer. No double amplifier so less equipment to lug around. Simple!

True stereo tremolo pedal that you could put at the end of your chain - Source Audio Vertigo. Source Audio is up there with TC Electronic and Strymon for stereo pedals. In fact, they go one better with true stereo drive pedals (the LA Lady, Kingmaker and Aftershock ones), so you can have practically all of your signal chain in stereo.

@AntoineMichaudGuitar

6 жыл бұрын

Thanks for the suggestion!

@rabbitspliff

6 жыл бұрын

I should've said in my first comment, the other true stereo tremolo I know of is the EHX Super Pulsar. It's incredibly fancy, it has to be one of, if not the, fanciest tremolo pedal there is. But it's expensive, at €259. The Vertigo is €178. (Thomann prices). They're both great. The Vertigo will do practically anything you'd normally ask from a tremolo. The Super Pulsar will do that plus a few more unique and interesting things.

Can you do a video on how you’re running your board? I take it you are using Efx loop on that board show, also using your drive channels on different amp..?

Doing this way, you are going to have ground loops hum in the amps. So don't forget to use a ground isolator like the Radial Shotgun. And you have to be careful about phase problems between amps. For example some amps reverse the phase on the lead channel and others don't reverse it.

Big Thumbs Up

+Tip : You need isolation when using 2 amps.. My recommendation would be to buy a Humdinger from TheGigRig to avoid ground loops and phasing issues when connecting in stereo, before you fry something.

@ForeverChillMan

4 жыл бұрын

I'm not an expert on the matter or electricity in general, there is a whole episode on multi amp setups on That Pedal Show channel on KZread that I suggest checking out. My guess is there is some interaction between amps which requires isolation of both instrument levels, and also to phase de-sync can be an issue. A splitter device like the humdinger removes both problems.

Your SOOOOOOOOO UNCOOL DUDE!!!!!!!!!

Strymon has option for trs input on stereo pedals. A trs mono input to stereo outputs

You could run the stereo out from the delay then put a seperate tremelo (if you have 2 haha) on each path before the amp. Good stuff on your channel by the way, I'm subbed x

@AntoineMichaudGuitar

7 жыл бұрын

Clever idea, but I doubt someone would want to press the switches to 2 tremolo pedals at the same time when that effect is needed ;) Thanks for subscribing!

@rocdogg66

7 жыл бұрын

A programmable loop pedal can make it happen in one button press.

@AntoineMichaudGuitar

7 жыл бұрын

Personnally, I wouldn't go into that much trouble for that and I would just buy a stereo tremolo pedal ;)

@rocknrollsinger

5 жыл бұрын

@@AntoineMichaudGuitar I had a stereo tremolo pedal but it only had a mono input which I found absurd. All stereo pedals should have stereo ins and outs. Otherwise, you end up with stupid compromises and effects that can't be used to their potential.

Nice!

i love strymon pedals stereo sound...very 3d et deep sound now i want a second amp!!!

@AntoineMichaudGuitar

7 жыл бұрын

Strymon pedals are at their best in stereo, for sure!

Great information... Thank you !! What kind of pedal cables are you using?

good video, but i need stereo on the loop effects , y use= guitar---> Mxr ABY---> imput amp A and imput amp B, so... i need a stereo delay but in the both FX loops of this 2 amps

How would you go from mono to a two input two output stereo? How would you use stereo pedals with an ABY?

Hey! I'm wondering what's considered the best options for a great, absolutely amazing "pitch shifter/Harmony effect"? Specifically with a 'digital piano, synth' and Rhodes. I imagine "stereo" is the better way to go in this situation. Not necessarily? The signal from my digital piano is probably also going to be more powerful than most effects pedals are made for right? So I'll start with a very low volume and test from there so that you don't damage the pedal. Is it worth getting a reamp box? Is one or two needed? How about just lowering the piano's volume line - to the outputs level to the level the pedals take. What gear would you personally recommend?

If i use a patchbay that has Stereo TRS jacks, do i just have to use the stereo breakout cables to connect to it?

I watched your other videos. Having a stereo set up is awesome. I'm wondering how can I do this stereo settings from a mono pedal and stereo pedal that has 2 inputs and outputs? I've tried but it sounds not even to me.

@wilberramirez8051

3 жыл бұрын

Lo solucionaste ?

learned alot, tnx... btw, what is the name of the pedal jacks you use? looks practical

I have the omec teleport with two monos, the tc viscous vibe and the strymon. Must I start running them all in stereo, or just the last two? Will the viscous vibe lose some effect if I ran it in mono?

The ending. Hahahahahaha. Love it.

Hey Anotnie :) thanks for this nice simple explanation. I have two questions: 1- In your Daw do you leave the two channels on center or you pan one max to the left and one max to the right? 2- i always wanted to ask you what mics are you using for the amps? Thanks in advance:)

@AntoineMichaudGuitar

6 жыл бұрын

Yousef Kekhia Yes, you pan the amps all the way to the right and left in your DAW! And I'm using Shure SM57 microphones for ampa. Very basic! Thanks!

I just bought a lehle stereo volume pedal and I want to put it after my drive pedals but. I have 3 strymon pedals at the end.I'm not sure how to hook it up in stereo properly.Any suggestions????

what happens if the cabling routing between 2 pedals is very tight, and in order to be able to run the 2 pedals in stereo I plug the stereo out of pedal 1 into the not stereo out of pedal 2 and the stereo out of pedal 2 into the not stereo out of pedal 1 ??? Would I still get the stereo effect ??? Or putting these in other words to not be confuse, insted of conecting the mono out of pedal 1 to the mono in of pedal 2 and stereo out of pedal 1into stereo out of pedal 2 ( to make the stereo connection ) you connect the mono out of pedal 1 into the stereo in of pedal 2 and the stereo out of pedal 1 into the mono in of pedal 2, still stereo effect ?? Normal stereo connections : Pedal 1 Mono out ---------- Pedal 2 Mono in Pedal 2 Stereo Out ---------Pedal 2 Stereo In What Im asking : Pedal 1 Mono Out ------- Pedal 2 Stereo In Pedal 1 Stereo Out -------- Pedal 2 Mono In ----------- Still stereo FX ??? Thanks anybody ----

Antoine, very helpful video. I have a question for you. I’m building a stereo pedalboard but my last pedal in my chain is a radial switchbone which only has one input. I’m in the process of seeing if it will accept a stereo breakout cable, but because the switchbone will being going to two amps, it will still be in stereo correct? The end of my chain is; Analogman Bi chorus stereo Strymon El Capitan Gfi Specular Tempus Radial Jx2 Switchbone Amp 1 Amp 2

So if I want to stereo three strymons together I’ll need two of those cables to go stereo out to input, stereo out to input to amp 1 & amp 2?

Will the Boss Line LS-2 or Electro Harmonix switchblade/switchblade plus accept a stereo input?

I've got a tip for you: Take your mono Vibrato (I recommend analog) and plug it into the R or L channel only. And there you have a very beautiful stereo chorus!

@mattgilbert7347

6 жыл бұрын

Wet/Dry with VIbrato is the best! Especially with a boosted overdrive and delay. It just sounds huge. Boss Vibrato Wazacraft is good

Let's say you are out of phase on your amps if you are simply using a mono to stereo signal. Is the only way to realistically solve that by using a phase inverter/shifter or something on one of the signals?

I use my amp distortion on my 5150 and the question is how about the footswitch? if i use 2 amps how to switch channel at the same time?

Hi Antoine, do you ever have any problems with solderless patch cables... a lot of people don't recommend them but they look so practical, flexible and short! I'd like to build a stereo pedal board and I need a lot of patch cables :)

Thanks, this is exactly what I was looking for. One question though regarding recording in stereo. Can you plug in your stereo output cables from your pedal into your interface and record in stereo? My interface has two "line ins". Wondering if the last pedal in my chain is stereo, if I could run that into the two line ins in the interface and record that way. Thanks again!

@AntoineMichaudGuitar

2 жыл бұрын

Hey David! I don't recommend plugging a guitar into the line inputs. It will sound dull and with a low level. You should plug them in the instrument inputs on the front of the interface that are made for high impedance such as plugging microphones or instruments direct in.

What if you were to need/want to buffer the signal, would you need only one buffer like the Mesa/Boogie High-wire at the beginning?

I want to ask, if I use a stereo to 2 mono cable plugged directly from the guitar's pickup to two line in the mixer, will it be stereo? thank you

How long are your patch cables? Looking into getting some.

So I have a aby pedal running dry and wet effects to two amps. I have an old boss DD-3 in front of the wet amp. My question is since the DD3 delay has a direct out. Can I also run that into the dry Amps effects loop return or would it require a second input from the fx loop send? Hope that makes sense. I’m guessing I’ll need to get another delay with two inputs/outputs. Thanks!! Great video

How about if I have a stereo output reverb pedal and I want to connect it to my studio monitor(presonus eris 3.5). What cable do I use and from where should I plug it? Is it left and right out of reverb into left of studio monitor or left of reverb into left and right of studio monitor or stereo of both?

Is there a pedal that can break mono to stereo but also gives you a pan knob? Or do you just use an audio mixer with a pan feature for that (usually bulkier and harder to mount)?

Can i place a stereo volume pedal at the end after a mono delay pedal to turn it into a stereo

You can use the tremolo at the very end of a stereo pedal chain if you put it after only one of the two signals coming from the stereo pedal, while the other out goes straight to the amp. That way only one half will have the tremolo effect so that might sound weird and bad, but it might also be cool and definitely makes the stereo effect noticable.

@lightwarriors7778

3 жыл бұрын

Wrong

Nice review. Hey may I know what is the brand of your patch cables? Thanks

Can you please explain how to set up Example 1 with a synth instead of a Guitar? I use a Scarlet 2i2 and wonder how to connect it like in Example 1.

Thanks for the nice video Antoine. Do you know if I can take two mono signals (e.g. one from my drives and one from my synth pedal) and combine these into a Strymon (Flint) stereo input by using a Y cable? From there I can feed Left (synth) and Right (drives) into L and R of my Boss Looper. I will then take the synth sound (with reverb, i.e. Left OUT) into the PA, and the drives (Right OUT) into my amp. Thanks!

I have a question .. the end of my chain is Guitar --- stereo chorus(one input and 2 outputs) --- stereo looper(2 inputs and 2 outputs) === to amp 1, amp 2 So the question is .. should I connect the 2 outputs of the chorus to the 2 inputs of the looper Or I just should connect the chorus via only 1 cable (the mono output) to the mono input of the Looper and then out of the two outputs of the looper to amp1 and amp2. It loooks like this 1. ---- Chorus ==Looper === amps or 2. ----- Chorus --- Looper === amps

@tychoclavius4818

4 жыл бұрын

The looper doesn't add any effect so splitting it there doesn't do anything for you. The chorus does, and the looper in stereo passes it on. Putting the chorus in mono defeats the purpose.

Hum...nice trick! Now...can I make this work with my Rocktron loop8? I'm only running stereo pedals thru it, so I wonder how to bring mono pedals in my board, hum...

Hi, thanks for the explanations ! But I have a question : I have an Electro Harmonix Echo (1 input, 1 output) linked to my Strymon Mobius (2 inputs, 2 outputs). Do I have to split the output of my Electro Harmonix into 2 outputs to link it to the stereo inputs of my Strymon, or it doesn't matter as long as the 2 outputs of my Strymon are linked to 2 amplificators or in stereo with another pedal ? My question is, can I leave the second input of my Strymon Mobius unlinked ? Thanks a lot !

Hi Great video so how you do the same thing but this time with the IR200 and DD200 from Boss please let me know thank you

So if we have only one jack for the input and one Jack for the output can we assume that it is a mono pedal and if so how can we use it with stereo pedals in the stereo chain? How do you tell if they are mono or not?

Hi, Antoine! This video is very well made, and it's rare to see on youtube tutorial about this stereo thing (that always bugs me). I have this problem, want to record in stereo through audio interface: Guitar-->Strymon Sunset-->Timeline-->Big Sky-->Ditto Looper-->Audio Interface (Focusrite 2i2). If I understood what are you saying in the video, the best thing to do is to: 1) get rid of ditto at the end of signal since it's mono, then 2) place the timeline after the big sky and use the looper in the timeline to replace the ditto, then 3) use the stereo breakout cable and go straight in the audio interface (then in daw and set the track to stereo) Is it correct or I have to consider something else?

@AntoineMichaudGuitar

5 жыл бұрын

Great reasoning! However, there is no need for a breakout cable, since both your Big Sky and Timeline have stereo ins and outs! So you can come out of your Timeline with one cable for LEFT and one cable for RIGHT and plug them into your two inputs of your Scarlett. The only thing you will need is a good amplifier simulator plugin inside your DAW, or else it's going to sound dull a bit going straight into your interface without any emulation. Other solution is just to get a Ditto X4 who has stereo ins and outs, so you can keep your pedalboard chain untouched!

@Paolo_Pino

5 жыл бұрын

@@AntoineMichaudGuitar I don't know if it's possible to record simoultaneously from the two channels of the 2i2. If I remember correctly it's not possible. And if it's possible, I will have to record 2 mono tracks and then merge them together (on reaper, that it's what I use it's possible, but it's a clumsy long process). For this reason I opted for the breakout cable, since every input on the scarlett accept stereo signals, and it'll be much easier to record directly one stereo track. In the next weeks I will try both combination and let you know. Thanks for the quick reply! ;)

@AntoineMichaudGuitar

5 жыл бұрын

No, don't do that! I want to save you from a complicated setup for nothing! You can do much simpler! I have the Scarlett 2i2 myself and can indeed record 2 tracks at the same time. On the website it clearly says: ''Perfect for recording two mics at once!''. Even if you record 2 mono tracks, it IS a stereo track. You just have to pan one to the Left and the other to the Right and... BOOM! You got your stereo recording. I record like this since years! I find it even better than a stereo track, because with two mono tracks panned, you have seperate control on the volume of the left and right sides. So if you inadvertently recorded one side quieter than the other, you can adjust each side seperately, which you can't do on a summed up stereo track.

@Paolo_Pino

5 жыл бұрын

@@AntoineMichaudGuitar Thanks a lot! Now that I know what I have to do it's time to shop for a good pair of quality cables. ;) Do you have suggestions?

@AntoineMichaudGuitar

5 жыл бұрын

The best are Mogami cables! Just check the difference of noise ratio with regular cables: kzread.info/dash/bejne/pol7lqikgrbMYsY.html

What if you want to run your delays and chorus through the effects loop?

I just bought the Orange Rocker 32 stereo amp. I bought a walrus mono slo multi texture reverb pedal. I should of bought a stereo reverb device. So what stereo pedal would you recommend that would pair up with the SLÖ nicely.I was thinking the Meris poly moon.

I hope someone reads this. If it's a dumb question my bad. I want to know if I can have my Laney lc 50 and pedalboard running as usual with a cable going from the other output on my boss rv-3 and connect it to a little practice amp I have? Will I be able to get a little stereo effect like that?

How about the zoom g5n multi effects ?

Hi Anoine im using 2 heads and 2 cabs my stereo effects pedals goes in the loop of both amps in stereo. And what about the front if i want to use my distortions pedals ? Do i need a box to go to the 2 amps ( 2 cables) thanks

question. I have an ABY pedal running out to two amps. one amp running dry effects in front and another amp running wet effects in front. I have an (old) boss DD-3 delay to the wet amp and the DD3 has one Direct out. Is it possible to also route the Delay to the effects loop Return on the dry amp so that the wet amp AND the dry amp has the delay or do I need a new delay with 2 inputs and 2 outputs to do that? Hope that makes sense. Great video btw!!!

This video was posted in 2017. I am watching this now in 2022. I liked it. But I have one question in my mind. Will u still be able to answer my question? The third example in the video, what if I don't have that mono pedal at the end, but instead want that stereo signal in the end to go to one single guitar amp for stereo effects? Is that possible? Will that converter help?

@AntoineMichaudGuitar

Жыл бұрын

You can't have stereo with a single mono amp. It's like asking to hear in stereo with a single earbud :-) it won't work! You need a second amp for stereo sound. Hope that helps!

What are your patch cables?

Hello if I'm going to do live performance using a stereo rig without any amp provided,is it work straight to DI box and how it's going to sound like?

Could you put a stereo pedal last in your chain and then split it off to your amp there, while running everything else in mono?

@tychoclavius4818

4 жыл бұрын

Yeah that's the first example setup.

What about pedals that have one stereo input and one stereo output TrS jack's like the Red Panda Raster 2??

Thank you for this video. I am running into some of the same compromise issues and I wonder if you've solved any issues since uploading this video? I am using a Roland JC40 and a Fender Vibrolux simultaneously, and I am running into an issue that seems unsolvable. The compromise is that I am currently forced to place my overdrive pedals (which I ONLY want to be sent to the Vibrolux) AFTER my two delay pedals, which I'd ideally prefer NOT to do. I'd like to have them set up the conventional way, overdrive--->delay. The ultimate goal is to send only my clean/modulation effects to the JC40 (which doesn't sound good with overdrive) while sending the entire chain including the overdrives to the Vibrolux. I can only do that by placing the overdrives after my delays, in between the only delay pedal I have with stereo outs (EHX Grand Canyon) and the last pedal in my chain which is the Strymon Blue Sky. The signal is then split to each amp via the Blue Sky's L/R stereo outputs. Is there anything I am overlooking? Thanks so much!

@AntoineMichaudGuitar

5 жыл бұрын

Hey man. You've got a great puzzle right here... The only way I could see that happening is if you used an ABY box straight after your guitar, then plug the A output of the ABY box to your drives pedals, then directly to Amp#1. After that, plug the B output to your Amp#2 immediately without passing through any other pedal. Then you would need all your modulation/delay/reverb pedals to have 2 inputs and 2 outputs each, and plug them in the effects loop of each of your amp. So Amp #1 would SEND to your first Modulation pedal Left input and RETURN to the Left output of your last reverb pedal. Then, same thing: Amp#2 would SEND to your first Modulation pedal Right input and RETURN to the Right ouput of your last reverb pedal. Finally, you would need to play on the Y (which means both amps at the same time) of your split box all the time. There is a lot of conditions: you need an ABY box, you need 2 amps that have effects loops available, and you need all of your mod/delay/reverb pedals to be dual input / dual output. I mean, that's a LOT of trouble just to to split overdrives :-)

@rocknrollsinger

5 жыл бұрын

Antoine Michaud, thank you for the detailed and thoughtful reply! I think I’ll just stay with what I have. I JUST got the Vibrolux which doesn’t have an effects loop and I am too in love with my delays to try and replace them with ones that have stereo ins/outs. I’m just gonna learn to love drive after delay!!

@AntoineMichaudGuitar

5 жыл бұрын

No problem man, have fun!

So you are sacrificing your sound capabilities of the chain for stereo.?

Hi Great video what about going in stereo to the FOH what type of pre amp or device i need. Currently i have a Boss IR 200 as my preamp so do i need another device to go to FOH direct? please let mer know thank you

Hi Antoine thank you for the video, I have a question. I'm running Guitar > Timeline > BigSky > HX Stomp (amp emulation) > PA system/soundboard. Do I need two cables from Timeline left/right Out into BigSky left/right IN, then 2 cables BigSky left/right Out into Stomp left/right In, and finally the Stomp (2 cables Out) into 2 channels of the board (2 DI boxes)?

@AntoineMichaudGuitar

4 жыл бұрын

Exactly! I would keep all of that in stereo, all the way, like you said.

What about ground loops and phase problems when using 2 Amps? I guess you can't forget to mention that.

@AntoineMichaudGuitar

7 жыл бұрын

That was pretty much the very basics, but you're right. I should do another video addressing those topics. And I did have some phase issues with my previous 2 amps in stereo in the past, so thanks for the reminder!

How do you do this in the effects loop? I want to use my Mark V mesa boogie preamp for EQ and some small amount of distortion and then run into the Mark V power section and a Fender twin; so I need to use the effects loop of the Mark V. My guess is you connect the SEND output of the Mark V effects loop into the mono input of the first pedal, I use the mobius so I can divide into stereo there, go through my timeline and then my big sky, then take one cable, say right and plug it into the RETURN of the Mark V and then the other cable (left) into the front of my Fender, or into the RETURN input of the Fender’s loop. Does this sound reasonable? Or will I cause a huge explosion of some sort??

@mikey206

5 жыл бұрын

Wish I could answer that but Yeh I’m wondering the same thing- ive got 2 5150’s and some sweet vintage rack fx’s and pedals I wanna run in stereo. But I can find a video anywhere that actually shows that and clearly shows the connections on the back of each amp etc. Awesome if you can do a stereo vid thru send and return Also how to connect 2 heads... In my case with the 2 5150’s would I plug a cable from the preout?? Cheers Mike

Question, Antoine, can I put the BOSS Chorus last, because it's in stereo?