This is a tutorial on how to start and run the ED250 in SimRail. If you have any questions feel free to ask in the comments.
Жүктеу.....
Пікірлер: 23
@wovelscotch Жыл бұрын
Getting a lot of comments about not being able to get the train moving again once stopped. They have updated the behavior of the ed250 a bit since I've released this video. Make sure the brake is completely released, then reset the throttle all the way back until there's an audible click, then reengage the throttle. It should start moving again.
@azlanharun8647 Жыл бұрын
Thank you for this tutorial. I always come here whenever I am stuck during start up.
@Blo0dyMustard Жыл бұрын
Quick and concise. Great tutorial! 😃👍
@azlanhar Жыл бұрын
Informative! Thank you. I've been searching for the battery box outside to start enable the battery but could not find any.😀
@auelmusic8 ай бұрын
The tutorial i was looking for 👍🏻
@SilkyTechh2 ай бұрын
great tuorial thabks.
@yumpinyiminy963 Жыл бұрын
Very nice job. I purchased the software because I think it has great potential. (I'm also Polish but can't speak a word. 😳) Don't know if you have heard or played "Run8 train simulator v3". These developers should team up. Run8 has all the physics but not so great graphics. Same idea though. Really nice job! Thanks!
@holytrucker21532 ай бұрын
thanks for this video
@user-mj3ed7pb1w3 ай бұрын
Anyone know how to start the traun with the new update in 2024 cause they added new things and now this doesnt work
@Schweizerleague Жыл бұрын
its nice but when i stop the train in katowice, i cant move it anymore :D i dont know why. i even started the train all again and still nothing
@wovelscotch
Жыл бұрын
reset the throttle all the way back until it clicks then re-engage the throttle
@Surfingnet Жыл бұрын
hello, nice video :) is there a way to stop the train using only the cruise control ? like in the EN96, you just set the desired speed to 0 and wait for the train to stop and then you apply the brakes, parking brake, etc. Because in the ED250, whenever I set the desired speed to 0, the cruise control stops (and because throttle is not at 0 it starts to accelerate...). Thx :)
@wovelscotch
Жыл бұрын
Nah, the cruise control disengages when you set it to 0. From my experience you can't use it like in the EN96 and you have to brake manually.
@BOTG_Adventures Жыл бұрын
Which train you reccomend for new. Player?
@wovelscotch
Жыл бұрын
34WE or the EN76. they are identical to each other in how they operate and there is an in game tutorial for the 34WE.
@mordsithrahl Жыл бұрын
How do you turn a switch clockwise or counter-clockwise, when the mouse is over it?
@mordsithrahl
Жыл бұрын
OK I found that, but now I have a new problem. Once I stop the ED250 train I cannot get it moving again. Brakes are set to running, parking brake is off, but if I push the power level forward, it moves, but the train is not drawing any power. What am I doing wrong?
@wovelscotch
Жыл бұрын
@@mordsithrahl I would need more info. Only thing i can think of is that it takes time for the pneumatic brakes to charge up, the train will not apply power to the motors until they've completely released
@wovelscotch
Жыл бұрын
reset the throttle all the way back until it clicks then re-engage the throttle
@alienx102
8 ай бұрын
@@mordsithrahlHey buddy can u tell me the solution for your first problem bcz i am also not able to turn it clockwise after my mouse pointing on it?
@EROStars Жыл бұрын
I did all the steps and I can't accelerate the train, it's just going by itself at 3km/h, is this a bug?
@wovelscotch
Жыл бұрын
If you got it moving then the only thing I can think of is that you have cruise control set to a very low speed. Disable it by pulling all the way back on the cruise control handle to see if that fixes it. If not, do you have any lights on the main control panel that are lit up different to what I have at 2:10?
@EROStars
Жыл бұрын
@@wovelscotch I forgot the door open, that was the problem. But anyway thanks for trying to help!
Пікірлер: 23
Getting a lot of comments about not being able to get the train moving again once stopped. They have updated the behavior of the ed250 a bit since I've released this video. Make sure the brake is completely released, then reset the throttle all the way back until there's an audible click, then reengage the throttle. It should start moving again.
Thank you for this tutorial. I always come here whenever I am stuck during start up.
Quick and concise. Great tutorial! 😃👍
Informative! Thank you. I've been searching for the battery box outside to start enable the battery but could not find any.😀
The tutorial i was looking for 👍🏻
great tuorial thabks.
Very nice job. I purchased the software because I think it has great potential. (I'm also Polish but can't speak a word. 😳) Don't know if you have heard or played "Run8 train simulator v3". These developers should team up. Run8 has all the physics but not so great graphics. Same idea though. Really nice job! Thanks!
thanks for this video
Anyone know how to start the traun with the new update in 2024 cause they added new things and now this doesnt work
its nice but when i stop the train in katowice, i cant move it anymore :D i dont know why. i even started the train all again and still nothing
@wovelscotch
Жыл бұрын
reset the throttle all the way back until it clicks then re-engage the throttle
hello, nice video :) is there a way to stop the train using only the cruise control ? like in the EN96, you just set the desired speed to 0 and wait for the train to stop and then you apply the brakes, parking brake, etc. Because in the ED250, whenever I set the desired speed to 0, the cruise control stops (and because throttle is not at 0 it starts to accelerate...). Thx :)
@wovelscotch
Жыл бұрын
Nah, the cruise control disengages when you set it to 0. From my experience you can't use it like in the EN96 and you have to brake manually.
Which train you reccomend for new. Player?
@wovelscotch
Жыл бұрын
34WE or the EN76. they are identical to each other in how they operate and there is an in game tutorial for the 34WE.
How do you turn a switch clockwise or counter-clockwise, when the mouse is over it?
@mordsithrahl
Жыл бұрын
OK I found that, but now I have a new problem. Once I stop the ED250 train I cannot get it moving again. Brakes are set to running, parking brake is off, but if I push the power level forward, it moves, but the train is not drawing any power. What am I doing wrong?
@wovelscotch
Жыл бұрын
@@mordsithrahl I would need more info. Only thing i can think of is that it takes time for the pneumatic brakes to charge up, the train will not apply power to the motors until they've completely released
@wovelscotch
Жыл бұрын
reset the throttle all the way back until it clicks then re-engage the throttle
@alienx102
8 ай бұрын
@@mordsithrahlHey buddy can u tell me the solution for your first problem bcz i am also not able to turn it clockwise after my mouse pointing on it?
I did all the steps and I can't accelerate the train, it's just going by itself at 3km/h, is this a bug?
@wovelscotch
Жыл бұрын
If you got it moving then the only thing I can think of is that you have cruise control set to a very low speed. Disable it by pulling all the way back on the cruise control handle to see if that fixes it. If not, do you have any lights on the main control panel that are lit up different to what I have at 2:10?
@EROStars
Жыл бұрын
@@wovelscotch I forgot the door open, that was the problem. But anyway thanks for trying to help!