the most straight-to-the point I've seen in ages.

@RecoveritDataRecoverySoftware

6 ай бұрын

Hi there, Could you please elaborate on your question? We're glad to help.

@Rakinx7

6 ай бұрын

@@RecoveritDataRecoverySoftware he meant that this video is amazing because it's completely straight to the point unlike other youtubers who waste lots of time just by unnecessary talks.

@busterevergreen9673

5 ай бұрын

I’m telling ya👍🏻

@Zzzzzzzzz678

5 ай бұрын

@@Rakinx7 exactly 💯

Short, sweet and to the point. Thank you!

this actually works, my previously not working hdd can be accessed again! thanks a lot

This is an awesome video. :)

YOU ARE A BLESSING! Idk what sorcery is this but I've tried many things, even brought it to the service, and I was so close to opening my hdd to fix the plate (if it was the problem). Tried this as my last straw since I have nothing to lose anw (I had backed up the data before this incident). Took me 1,5 hours then it magically appeared again! If this works for you guys, as soon as the files open, backup all the data. In case your drive is actually physically broken Thank you thank you!!

@pedrochen3586

7 ай бұрын

How do you back up the data?

@baguette9692

6 ай бұрын

@@pedrochen3586 I always backed up my data everytime I did anything. so when this happened I got no problem since I had backed up everything. Sorry not helping :( but this trick worked for me at least the first time I tried it, and found out there are still some datas I need to back up, so I quickly copy paste them to my harddisk

@michaelmueller6833

6 ай бұрын

My cloning keeps failing

is it ok to use chkdsk C: /f /x /r instead of chkdsk C: /f /r /x

/X Forces the volume to dismount first if necessary. What does that do ?

Can I use Chkdsk to fix failed external hard drive?

My system suddenly become unresponsive.. I had to force it off, but then I had checkdisk issues. Eventvwr shows: Volume C: (\Device\HarddiskVolume2) needs to be taken offline for a short time to perform a Spot Fix. Please run "CHKDSK /SPOTFIX" locally via the command line, or run "REPAIR-VOLUME " locally or remotely via PowerShell. Not sure if something caused the hang, that led to the power-off which caused the corruption, or if it the ssd drive is going bad that started it all. Anyhoot, now my Windows / Start menu won't work, and at least one of the applications doesn't start.. plus i have tons of "found.00x" folders in my c drive. I think I'm going to reimage the drive (foxclone).. but not sure how to check if physical health of the ssd is good. Any suggestions?

Hey, please help me I just restart my laptop and it shows black screen even though u have made a video about that but it didn't work please help me

I followed these instructions on a 3 year old 10TB Seagate hard drive. It took over 6 days to complete the chkdsk and did not work. Then I bought Wondershare RecoverIt. It took 8 days to run and claimed it successfully recovered over 3TB of the 5TB of data on the drive. There were also over 200 files with missing file names & over 5,000 files with missing paths. Not one file worked on the hard drive, nor on the target drive. Even the "successful" files were corrupted. I ran RecoverIt a second time with the same results that everything was corrupted. What a total waste of money!

@okolijohnpaul5870

Ай бұрын

Try disk genius

It works.. expect 6 hrs or more for it to fix main drive there are 5 steps. Keep it plugged in. Eventually it will finish mine took 6 hrs easy or more

Thank you, it sounds simple enough let me try it.

Man, I go back to this video every month...my hard drive is really bad

thank you so so much you are the best thx

Looks like this process could take about 3 days for a 4TB external drive on USB2.0. I was (stupidly) transferring linux iso's to my external drive via a bootable linux live environment, running from USB via Ventoy. Pretty sure my PC ran out of RAM or had some sort of error happen. Screen and keyboard went blank during the copy process, but my external was still in busy mode. Waited several hours and forced a shut down. Ended up with bad sectors and unreadable areas on my external hdd. I would advise running a scandisk or chkdsk tool from a 3rd party app (I used MiniTool Partition Wizard, but there are others out there that include such functionality), as it finished in around 8 hours. I just wasn't sure if the free edition actually marked the bad sectors and attempted to recover the data. So resorted to chkdsk to be doubly sure. I don't really care about the data being lost (that I was copying), but the health and future reliability of the hdd is very important. There are bootable utilities that might perform this function at a faster rate as well. What would really speed things up would be if I either had USB3.0 or could attach it via SATA/eSATA port.

@Comander311

Жыл бұрын

Wow that's a loooot of time :O You a are a pro on that, haha, looks like you have many space to play and care for... Thank you for the extra info.

Few minutes he says. Meanwhile my drive is going to take 5 hours and 40 minutes to scan...

@JoelScattolinNeto

Жыл бұрын

It worked for you? Im doing the same thing for about 5 hours and nothing yet... Still in 100% and trying to calculate something...

@AneurynPlays

Жыл бұрын

@@JoelScattolinNeto That doesn't sound good. It ended up taking longer than 5 hours though, I left it over night and went to bed.

@user-iu3fd4is4e

Жыл бұрын

R u serious, mine is being running since yesterday and it's at 10% 😂😂 I don't know what to do

@terrapinflyer273

Жыл бұрын

Lucky lol. Judging by how many files it's gone through overnight on my 4TB USB3.0 external via USB2.0, mine will probably take 3 days or more lmao. Looked like it was stuck for quite a while, but it's moving... Slooowly.

@AneurynPlays

Жыл бұрын

@@terrapinflyer273 Damn...

But I need to open my laptop first to use that command, no? It said kernel inpage error and shut down. Now its not opening.

CHKDSK Not working on my damaged SSD called "ADATA SU630 240 GB" Windows 10 can't boot, motherboard automatically redirected me on BIOS screen because SSD not responding. I temporary installed fresh Windows 10 on a USB Flash Drive and i try to boot and it can does very well. And then i check my SSD health status and it said alot of LBA errors. Around 700-800 LBA errors found. Bad sectors found. And i can't even reach files in my SSD. It says "RAW" format. So, NTFS turned RAW format or it caused by SSD error. Now, i can't be sure how can i fix my SSD or recover my all datas without problem.

@RecoveritDataRecoverySoftware

6 ай бұрын

Hi there, thank you for your question. If you're encountering LBA errors, bad sectors, and a "RAW" format on the drive, it indicates potential hardware problems.

Thanks alot ..It did work. I left my laptop untouched for an hour ...my wd harddisk hard more than 16k files.I closed chkdsk window after an hour ..i mean in between. it worked.

Bro tyvm you saved my files....

Can you help me? Because while on chkdsk I was in stage 2 then it said preparing automatic repair then said diagnosing your PC then it said repairing disk errors, can you help

@PythonWood

2 жыл бұрын

this comment was 4 weeks ago but i think it just mean that its repairing the errors of the disk, not an error occuring while repairing the disk.

Woah I’ve never seen the x in that command. What does the X do?

Is it possible to run a specific folder and not the whole drive?

@RecoveritDataRecoverySoftware

Жыл бұрын

Hi there, thank you for your question! No it isn't possible to run chkdsk on a folder.

@lesedi.p.m.k

Жыл бұрын

@@RecoveritDataRecoverySoftware OH okay thank you for the response, much appreciated. 🤝🏾

@bsbalaguru

Жыл бұрын

​@@RecoveritDataRecoverySoftwaredoes it delete files in bad sector

can i cancel? since it takes to long like forever

Need help, my external hard disk cannot boots keep asking me to reformat this was happened after power outage. Although i have run the minitools but cannot 100% retrieve the data. But those data is important can i still run CHKDSK to see can open the external harddisk ?

@RecoveritDataRecoverySoftware

3 ай бұрын

Hi there, thank you for your question! If you drive is still showing up in your computer then yes you should be able to run CHKDSK and hopefully repair the drive.

what command used for multiple hard disk present on one pc

@KuromiDarklord

2 ай бұрын

You would most definitely not want your PC to do that with multiple drives at a time trust me.

Thank you so much

hi im doing this with an external hdrive because of corrupted files on it umm is it normal not to be allowed access to the hdrive while chkdsk is operating this is the first im doing it

@RecoveritDataRecoverySoftware

Жыл бұрын

Hi there, thank you for your question! Yes, it is normal not to be allowed access to an external hard drive while chkdsk is operating on it. When you run chkdsk on a drive, it checks the file system for errors and attempts to repair any issues that it finds. During this process, the drive is locked and cannot be accessed by other programs or processes. This is done to prevent any data corruption or loss that could occur if other programs were trying to access the drive at the same time.

@sean-fw7zi

Жыл бұрын

@@RecoveritDataRecoverySoftware ahh ok thanks for the reply mine went for about 3 days straight before i accendently restarted my computer but the hdrive wasnt corupted or anything so its still all good on that end

Thank you very much

Does chkdsk /r rewrite the data in good sectors back to where it read it from (like Spinrite does) in order to 'refresh' storage of that data on the disk?

@RecoveritDataRecoverySoftware

9 ай бұрын

Hi there, thank you for your question! The chkdsk /r command in Windows does not rewrite data in good sectors to refresh storage, unlike Spinrite, which claims to do so. chkdsk /r primarily scans the disk for bad sectors, attempts to recover readable data from them, marks them as bad to prevent future use, and relocates recoverable data to healthy sectors, focusing on file system integrity and addressing issues related to corruption.

@utubestalkerdotcom

9 ай бұрын

Note: At present, Spinrite 6.0 only supports drives less than one terrabyte. 6.1 will be updated for larger drives. Unknown when release date will be

Thank you for this short, precise video. I have a 10 TiB Spinning drive and it always flags for repair. I'm currently have about 12 hours left according to the ETA counter. May I follow up with you pending results?

@RecoveritDataRecoverySoftware

Ай бұрын

Hi there, thank you for your question! Sure you can!

thank you so much

When I press enter to run it says the volume is being used and cannot run. So I asked me if it should run the next time it is restarted. So I typed Y to confirm. I’ve just restarted the PC and my monitor isn’t getting any signal now, is it just running the program whilst it turns back on? And if I try the command again and it says the volume is in use what should I do? Thanks

@RecoveritDataRecoverySoftware

12 күн бұрын

Hi there, thank you for your question! First lets start with your monitor make sure everything is still securely plugged in and try a different port if possible. I would also recommend trying to restart and check if your monitor switches on correctly. If it still wont work I would recommend trying to plug in a bootable USB drive and try running your computer from that so you can further troubleshoot.

I was using my microSD card as a external drive with the one drive sync. Everything was working fine but suddenly the files became inaccessible and now I cannot open them, don't know if the card is faulty or there is something else going on, still can see all the files in the card but cannot open them. Have tried chkdsk, copied to other location but nothing happened, (files were in .xls, .xlsx, .dwg, .skp, .png, .etc format.) Is there any possibility to recover all the files?

@RecoveritDataRecoverySoftware

Ай бұрын

Hi there, thank you for your question! I would recommend checking the format of the drive when doing CHKDSK did you get any error messages? The drive itself might be the issue and might need to be replaced, you can try taking it to a professional for further assistance.

@shashankmishra6603

Ай бұрын

It was FAT32, I have formatted it with NTFS now. Should I trust this?

Such a savior my ssd was corrupted from freezing during bios self test

Is there any difference between end result of windows built-in and HDD Regenerator in repairing badsector?

@RecoveritDataRecoverySoftware

2 ай бұрын

Hi there, thank you for your question! If you’re looking for a quick and integrated solution, use the Windows built-in tool and for more advanced repair options and specialized algorithms, consider using HDD Regenerator.

I tried this but it's not working. "An error occured while examining the boot region." it says

I have the cyclic redundancy error and my hardrive only shows in disk management and I cant initialize it. It also does not have a drive letter so i cant run the command.

@aaronperez6597

Жыл бұрын

I have the same issue, have you found a solution?

@MonkeyGamingRED

Жыл бұрын

@@aaronperez6597 I tried doing command and even contacted Microsoft support and sadly nothing worked. I think you can take it to a repair store but you would probably lose the data and on it and it would cost much more than just buying a new one. I just bought and new one redownloaded all the game I had

Hi - Is there an equivalent command or utility for the QNAP NAS QTS server?

@RecoveritDataRecoverySoftware

2 ай бұрын

Hi there, thank you for your question! As far as I know there isn't any equivalent to CHKDSK I would recommend asking on a dedicated forum if you need any assistance.

How to fix raw format usb I/O error ?

Hi I don't have a drive letter for the external hard drive. And it says unallocated in disk management. What to do

@RecoveritDataRecoverySoftware

Жыл бұрын

Hi there, thank you for your question! You need to allocate the disk and assign a drive letter. To do this, right-click on the unallocated space in Disk Management and select "New Simple Volume." Follow the wizard and assign a drive letter to the external hard drive. If the option to create a new simple volume is grayed out, initialize the disk first by right-clicking on the unallocated space and selecting "Initialize Disk." Choose the partition style and click OK. Note that creating a new volume will format the drive and erase any existing data on it. Therefore, it's important to try to recover any important data on the drive before formatting it.

@glitchedone_YT

11 ай бұрын

@@RecoveritDataRecoverySoftware what if the disk wont initialize? ive been trying to format an old ssd so i can use it again but it refuses to initialize

May i ask if chkdsk /x is safe? I ran it in the command prompt on safe mode, from what i saw online, theres a chance that i could lose some files, is it safe to run /x?

@RecoveritDataRecoverySoftware

Ай бұрын

Hi there, thank you for your question! Before running chkdsk I would recommend backing up your data on the drive. I would also recommend running it in when your computer is in start up repair mode to minimize potential issues.

Hello sir what is the next i will do it says "the disk does not have enough space to replace bad clusters" Then "an unspecified error occurred" (6e74xxxxxxxx b75) (6e74xxxxxxxx 17b4) Please help sir

@RecoveritDataRecoverySoftware

8 ай бұрын

Hi there, Could you please elaborate on your question? We're glad to help.

So my pc ran into a restart boot loop and tried different methods to make it boot then i found the chkdsk method. I tried it on my pc in the cmd prompt in the automatic repair bluescreen and then it booted after i restart. Then I thought its fixed because it booted, but then i saw my audio with an X in the taskbar and says no audio device is installed and when i try to open the start button it doesnt respond and when i try to open some apps like chrome it wont open also and when I try to right click and go to display settings it says the file does not have an app associated with it for perfoming this action. also when i try to Win + I command to open the windows settings it doesn’t work. pls help me😢

@RecoveritDataRecoverySoftware

4 күн бұрын

Hi there, thank you for your question! I would recommend trying to press Ctrl + Alt + Del or right-click the taskbar and select Task manager then go to the File menu and click Run new task then type "powershell", check the box for Create this task with administrative privileges, and click OK and type "sfc /scannow" and press Enter. If that doesn't work I would recommend taking it to a professional for further assistance.

@sirris6945

4 күн бұрын

@@RecoveritDataRecoverySoftware thanks for the help but unfortunately it still didn’t work, it only says “Windows Resource Protection did not find any integrity violations”.

Will it repair raw read data error in a hard disk?

@terrapinflyer273

Жыл бұрын

I've encountered this issue caused by various reasons. Usually with microSD cards. Haven't dealt with it in a long time, but - try 7disk (or 7data/testdisk7 WIP? One of those... I think.) it's used in forensic data recovery/repair. It has the ability to seek out and restore partition tables whether it be FAT, NTFS, Apple, or Linus file systems. It is a bit tricky to use, but relatively straight forward once you figure out the menu prompts. I would recommend seeking out a tutorial or official documentation on it before trying to use it. It's saved my butt quite a few times, but unfortunately RAW format isn't always recoverable. Once a storage medium becomes corrupted, the best thing you can do is not use it. Or do everything to avoid more data being written to it. As that data can overwrite the MBR which stores data on the partition type and structure.

@ursodopudim

7 ай бұрын

@@terrapinflyer273 so if my ssd has this RAW read data error, how can configure it to not put data on this section that is corrupted?

it showed unable to determine volume version and state chkdsk aborted

Is it better to run check disk before or after partitioning a hard drive?

@RecoveritDataRecoverySoftware

4 ай бұрын

Hi there, thank you for your question! It is better to run check disk before partitioning a hard drive, as it can detect and fix any errors or bad sectors that might affect the partitioning process.

I was getting this error repeatedly for my D drive, so i ran this chdsk on my command promt. It says it will take 5 hr or so. Can i cancel it ? Will it cause problems in my disk drive ?

@RecoveritDataRecoverySoftware

18 күн бұрын

Hi there, thank you for your question! I wouldn't recommend cancelling the scan once you have started it. If you need to for whatever reason open up CMD and type "chkntfs /x "your drive":" then restart your PC.

thank u 😘😘😘

What if....ive done as you say....the cursor moved down one line and is doing nothing...just a flashing cursor?

@RecoveritDataRecoverySoftware

5 ай бұрын

Hi there, thank you for your question! If the cursor moved down one line and is still flashing, it means that CHKDSK is still running and has not finished yet. It may take a long time to complete, depending on the size and condition of your disk. You can press the Esc key to check the progress of CHKDSK and see if it is stuck at a certain percentage or stage.

Can i ask which drives i should be looking to check? Ive got c and d

@RecoveritDataRecoverySoftware

2 ай бұрын

Hi there, thank you for your question! I would recommend trying it on both drives to be sure.

Go ahead and type cask where ? Where do we type it ?

You said "type in chkdsk ...". Where do you type that in? I looked closely at your screen, but it is hard for me to tell

@RecoveritDataRecoverySoftware

6 ай бұрын

Hi there, thank you for your question. Here's how you can do it: Press the Windows key on your keyboard or click the Windows icon in your taskbar to open the Start menu. In the search bar, type "cmd" or "Command Prompt." Right-click on "Command Prompt" in the search results and select "Run as administrator" to open it with administrative privileges. This is important for performing certain tasks like disk checking. In the Command Prompt window, you can type "chkdsk" followed by the drive letter you want to check. For example, if you want to check drive C:, you would type: chkdsk C: Press Enter, and the system will start checking the specified drive for errors.

I have black screen is normal?

after chkdsk and drive letter.. what /f , /r and /x comand will do?

@RecoveritDataRecoverySoftware

28 күн бұрын

Hi there, thank you for your question! /f fixes any structural issues with the file system and directory. It corrects inconsistencies between them, /r searches for corrupted parts of the physical hard drive (while also running /f). It attempts to recover data from damaged areas and relocate it to undamaged portions of the drive, /x dismounts a drive so that it can be checked and fixed. Running this command also includes the /f functionality. I would recommend using all the commands.

@shafwandito4724

24 күн бұрын

​@@RecoveritDataRecoverySoftwareHello, I have a question, chkdsk /r/f took so long to do for my external hard disk, it's been 12 hours and it's still in stage 3. I want to cancel it, but don't know how. Ctrl + c does not work.

Does it requires reboot of system?

@mecyanned

3 ай бұрын

If its not the c:\ drive, you dont need to but i would reccomend it

Any data loss

I scanned drive e but used /e instead/x It's deleting index entry

@rain.620

7 ай бұрын

so is it broken?

@valok14

7 ай бұрын

@@rain.620 yup

linux/ubuntu?

All this does for me is give this message. How do I fix it? Access Denied as you do not have sufficient privileges or the disk may be locked by another process. You have to invoke this utility running in elevated mode and make sure the disk is unlocked.

@mina-chan960

Жыл бұрын

Make sure to run cmd in administrator mode

@RecoveritDataRecoverySoftware

Жыл бұрын

Hi there, Thank you for your question. To fix this issue, you need to run the utility in elevated mode, which means running it with administrator privileges. To do this, right-click on the utility and select "Run as Administrator" from the context menu. If the disk is still locked by another process, you will need to close that process or wait for it to finish before attempting to access the disk. If you are still unable to access the disk, you may need to take ownership of the disk or adjust the permissions for the file or folder you are trying to access.

a drive with failing sectors is sometimes (but certainly not always) in a proverbial death spiral, with potentially only limited hours of functional operating time left....; wasting those hours on a chkdsk is indeed on option.

@RecoveritDataRecoverySoftware

7 ай бұрын

Hi there, thank you for your question. If a hard drive is exhibiting signs of failing sectors and is potentially in a critical state, it's important to prioritize data recovery and migration to a new drive rather than running extensive disk checks like chkdsk. Running chkdsk on a failing drive could potentially worsen the situation or accelerate the failure process.

can full format fix bad sectors?

@aamirchishti7350

4 ай бұрын

Yes

@aamirchishti7350

4 ай бұрын

But if new new sectors if old then chance a bit, but i personally formated my data then my hard disk 9 percent health goes to 71 percent

Can you run check disk on an unformatted hard drive?

@RecoveritDataRecoverySoftware

5 ай бұрын

Hi there, thank you for your question! Yes, you can run check disk on an unformatted hard drive, but it may not be very useful. I would recommend formatting the drive before hand and then using check disk.

When I do this, the system tells me "Cannot look current drive." and "Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts (Y/N)"

@RecoveritDataRecoverySoftware

3 ай бұрын

Hi there, thank you for your question! When you get that pop up select the yes option and hopefully that'll solve your issue if not there might be a bigger issue at hand and I would recommend taking it to a professional for further assistance.

i have important files on my hdd can i do this without a buckup?

@RecoveritDataRecoverySoftware

4 ай бұрын

Hi there, thank you for your question! I would always recommend backing up your data if possible, using CHKDSK can delete some files so I would recommend also using the parameter /f to stop it from auto repairing them and allowing you to look over it before anything becomes an issue.

@ibrahimbinomar

4 ай бұрын

@@RecoveritDataRecoverySoftware Thanks for replying you have been very helpful

I recntly moved my files from another hard disk and the health drastically dropped. How can you help me

@RecoveritDataRecoverySoftware

10 ай бұрын

Hi there, Could you please elaborate on your question? We're glad to help.

takes forever and nothing happened.. tell o unplug the usb.. Please help

Attention: if you have lags caused by problems with hdd, this will not work. Reinstall your windows. From my experience

@iscatty7189

9 ай бұрын

Thank you!

@pagenotfound-

9 ай бұрын

full format can fix bad sector?

@E10thegrinch

5 ай бұрын

How do I reinstall windows? And does my games and files get lost?

How do I run Chkdsk on a failed external hard drive that does not have a drive letter?

@granzon7396

Жыл бұрын

Wdym failed ex hard drive? U mean the hdd u using are can't read by ur computer? If that's the case then u need to format it to be able to read by ur computer

@RecoveritDataRecoverySoftware

Жыл бұрын

Hi there, thank you for your question! You can try alternative methods such as using Command Prompt to bring the disk online and clear the read-only attribute, then running Chkdsk. If that doesn't work, consider using third-party disk repair tools like TestDisk, Recuva, or MiniTool Partition Wizard, which can handle drives without a drive letter.

Should we use it for ssd

@KuromiDarklord

2 ай бұрын

That command works for scanning and fixing any drive regardless of wether it is a SSD or a hdd

i tried it but it's not working, an i get this "An error occured while examining the boot region." error.

@RecoveritDataRecoverySoftware

5 ай бұрын

Hi there, thank you for your question! The error message you received indicates that the boot information for your disk is corrupted. You can try to repair the boot information using a Windows installation media, such as a DVD or a USB drive. You can also try formatting the drive but this will result in lose of all the data on the drive.

My hard drive appears on my computer. My problem is it doesnt show the space allocation (blue bar) which i have used and its not accessible. I tried changing the drive lettter, i tried to access the properties to change its Admin Access Full Control but its not working. It connects for awhile than it gets dusconnected by itself. Can anyone help me please

@RecoveritDataRecoverySoftware

4 күн бұрын

Hi there, thank you for your question! Do you get an error message when doing this? I would recommend trying to take it to a professional if none of the solutions worked as it might be an issue with the drive itself.

@martontapas1283

4 күн бұрын

@@RecoveritDataRecoverySoftware I have tried the command prompt for chkdsk, it runs for awhile and than the hard drive disconnects for some reason. I have taken it to every professional i know in my area which no one could help. All my work and everything else is stuck in there :(

@martontapas1283

4 күн бұрын

@@RecoveritDataRecoverySoftware I also tried to use the RecoverIt software, it reads and shows the files but in order to recover, i will have to purchase monthly or yearly license.

Can run on c drive?.

@dkb2080

2 жыл бұрын

yes

chkdsk is not available for raw drives

@ursodopudim

7 ай бұрын

did resolve it? im stuck there too :(

@JuanLopez-vf3mo

5 ай бұрын

Hello. If you don't have to recover any data on your device, you could use HDAT2 or VIVARD to check and remap bad sectors. Greetings

Remarkable

"The type of the file system is NTFS. Win cant run disk checking on this vol coz its write protected" How do i solve it??

@RecoveritDataRecoverySoftware

22 күн бұрын

Hi there, thank you for your question! I would recommend checking to see if the drive has any physical write protection switch and make sure your running as administrator when trying to run the command. If that doesn't work it might be an issue with the drive itself and I would recommend taking it to a professional.

@Paul-df1vf

22 күн бұрын

@@RecoveritDataRecoverySoftware I have tried to recover using bootable usb drive, still it's showing the same thing 🤷🏻 and there is no physical switch

NOTHING HAPPENED "file record segment unreadable" "insufficient disk space to hotfix unreadable files"

chkdsk says : Access Denied as you do not have sufficient privileges or the disk may be locked by another process. You have to invoke this utility running in elevated mode and make sure the disk is unlocked.

@RecoveritDataRecoverySoftware

9 ай бұрын

Hi there, thank you for your question! You need to open the Command Prompt with administrator privileges by right-clicking on "Command Prompt" in the Start menu and selecting "Run as administrator." In the Command Prompt, type "chkdsk /f C:" (replace "C:" with the appropriate drive letter) and press Enter. If prompted, schedule the disk check to run on the next system restart by typing "Y" and pressing Enter. Ensure that no other processes or programs are actively using the disk, and then restart your computer to allow chkdsk to check and repair the disk, taking into account that it may result in data loss, so back up important data before proceeding.

That comamde will it delete all my files and format my hard drive or only fixing hard drive error???

@RecoveritDataRecoverySoftware

Жыл бұрын

Hello sir, you can get more information about the bad sector: bit.ly/3Lj9ykt

I tried but it says "windows cannot run disk checking on this volume because it is write protected".

@RecoveritDataRecoverySoftware

6 ай бұрын

Hi there, thank you for your question. The error message indicates that the volume is write-protected, preventing the disk check operation. To resolve this, you can try the following steps: Run Command Prompt as Administrator: Press Win + X and select "Command Prompt (Admin)" or "PowerShell (Admin)." If using PowerShell, you may need to run the following command instead: chkdsk /f C: (replace C: with the letter of the drive you want to check). Check Registry Settings: Open the Registry Editor by pressing Win + R, typing regedit, and pressing Enter. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies. Look for the WriteProtect DWORD value. If it's set to 1, change it to 0.

Hello In stage 2 it says unexpected error occured(696e647863686b2e 548) Please someone help me

@RecoveritDataRecoverySoftware

9 ай бұрын

Hi there, thank you for your question! Try running chkdsk with different parameters like /f or /r, and consider performing the check in Safe Mode to rule out third-party software interference. Running the System File Checker (sfc) can help identify and repair system file issues. Check for potential hardware problems by using manufacturer-provided diagnostic tools, ensuring proper cable connections, and updating or rolling back disk drivers.

“Windows cannot run disk checking on this volume because it is write protected” what do I do now

@michaelmueller6833

6 ай бұрын

Run cmd as admin

how many hours does it take if its 2tb hdd?

@RecoveritDataRecoverySoftware

8 ай бұрын

Hi there, Could you please elaborate on your question? We're glad to help.

@hanma_inu

8 ай бұрын

@@RecoveritDataRecoverySoftware i mean how long does it take to fully scan 2tb external hdd with chkdsk?

Please help my new 5tb external hd is showing 80 gb in Pc ..😢

@RecoveritDataRecoverySoftware

7 ай бұрын

Hi there, Could you please elaborate on your question? We're glad to help.

@gutsthestruggler3052

7 ай бұрын

@@RecoveritDataRecoverySoftware I connected my Newly purchase 5tb External to Pc and it's showing 80gb in disk management.

i tried this and it said cannot open volume for direct access , someoen please help me man

@RecoveritDataRecoverySoftware

11 ай бұрын

Hi there, Could you please elaborate on your question? We're glad to help.

@fishtwix

11 ай бұрын

@@RecoveritDataRecoverySoftware my ssd randomly black screened my computer and couldnt be used to boot up windows into , i had to use my hard drive to boot windows and i couldnt transfer any files between the drives and could only access few folders and some games on my ssd.

Mine can’t be repaired it says

Do each / one at a time not all together like in this video are your gonna be waiting for hrs

What do each of those parameters mean? f,r,x Thanks.

@RecoveritDataRecoverySoftware

Жыл бұрын

Hi there, Thank you for your question. The parameters f, r, and x have the following meanings: /f: This parameter tells CHKDSK to fix any errors it finds on the disk, including bad sectors. It will also attempt to recover any readable information from the bad sectors and move it to a good location on the disk. /r: This parameter tells CHKDSK to locate bad sectors on the disk and recover any readable information. It will also mark any bad sectors as unusable to prevent data from being written to them in the future. /x: This parameter tells CHKDSK to dismount the volume before beginning the scan. This is necessary because CHKDSK cannot repair a disk that is currently in use. By dismounting the volume, CHKDSK ensures that no programs are accessing the disk during the repair process.

@aravindmj920

3 ай бұрын

@@RecoveritDataRecoverySoftware Nice Qn and answer, exactly what I was looking for!

Does it only check the sectors that have files on them, or the whole sectors of the hard disk?

@RecoveritDataRecoverySoftware

9 ай бұрын

Hi there, Could you please elaborate on your question? We're glad to help.

cannot open volume for direct access 0:31 ;-;

@iancastro383

Жыл бұрын

Open cmd as an administrator

sir if disk volume is not showing then how to check

@RecoveritDataRecoverySoftware

4 ай бұрын

Hi there, thank you for your question! I would recommend checking your bios and seeing if the device is showing up if it isn't make sure it is receiving enough power and is plugged in correctly. It might be a physical issue with the drive itself so I would recommend taking it to a professional if the disk is still not appearing.

PC freezing chkdsk in command prompt? 0:47

@RecoveritDataRecoverySoftware

9 ай бұрын

Hi there, Could you please elaborate on your question? We're glad to help.

36 Hours complete still 76% and file are unreasonable shown is it works ??

@RecoveritDataRecoverySoftware

13 күн бұрын

Hi there, thank you for your question! I would not recommend stopping the scan, sometimes it can take a long amount of time to complete.

It said disk is in use

“Access Denied as you do not have sufficient privileges or the disk may be locked by another process. You have to invoke this utility running in elevated mode and make sure the disk is unlocked.” What i should do?

@oleskiy

5 ай бұрын

I just did a factory reset, erasing everything, but the process stuck at 99% for the second time.

@RecoveritDataRecoverySoftware

5 ай бұрын

Hi there, thank you for your question! Make sure to give it a few hours you don't want to stop the process so I would recommend running it overnight.

@oleskiy

5 ай бұрын

@@RecoveritDataRecoverySoftware I ran it for more than 24h and I tried local and cloud software install. I bleive that I have some virus because of other factors. I just will buy new disc or pc 😂

When I did this it said volume is write protected.

@RecoveritDataRecoverySoftware

4 ай бұрын

Hi there, thank you for your question! Some hard drives have a physical write protection tab. Check your hard drive or disk enclosure for this tab. If found, switch it to the Off position. Try opening Command Prompt and typing "diskpart", then press Enter then type "list disk" and press Enter to select the problematic disk using "select disk D" (replace D with the actual drive letter). Disable write protection with "attribute disk clear readonly".

@rob98000

4 ай бұрын

@@RecoveritDataRecoverySoftware it's a 970 pro ssd, I've tried this method to remove write protection and even the registry edit method.

what if it's a raw drive?

@RecoveritDataRecoverySoftware

Ай бұрын

Hi there, thank you for your question! If you open up command prompt and type "chkdsk yourdrive: /f /r" and then press enter if that doesn't work consider formatting the drive but this will erase all data on the drive.

"Access Denied as you do not have sufficient privileges or the disk may be locked by another process. You have to invoke this utility running in elevated mode and make sure the disk is unlocked" I have a NvMe ssd and its giving me that message.

@RecoveritDataRecoverySoftware

6 ай бұрын

Hi there, thank you for your question! To run it in elevated privileges right-click on the utility and select “Run as administrator” to run the utility with elevated privileges. Ensure that the disk is unlocked and not being used by any other process. If that doesn't work try closing all the applications that are currently using the disk and then try accessing it again.

What if the drive no longer has a drive letter?….

@RecoveritDataRecoverySoftware

7 ай бұрын

Hi there, Could you please elaborate on your question? We're glad to help.

@TheFruitingChamber

7 ай бұрын

@@RecoveritDataRecoverySoftware i corrupted my ssd i just tossed it st this point I've tried removing the USB interface and just using sata cables and it still was in read only mode oh well :/ what brand m.2 would you recommend as a boot + main game drive though??