Now that's what a call a video my good sir, you got the point across make sure your bag has been updated and 30 min deenergize.

@JunkyardJunkie

11 ай бұрын

I appreciate that! Thanks for watching!

I did this mod back in 2011 on my 2006 Mustang GT. I used a OEM Shelby GT500 steering wheel as I wanted the combo leather/alcantara. One of the best mods I did on my car. Made driving so much more fun as the thicker wheel is more comfortable than the stock thinner early S197 wheel. Its a MUST DO if you like driving. And yes the cruise control works but obviously the SYNC buttons are inop, but that's okay. They become a conversation starter for those who "know" when they see the wheel. 👍

@JunkyardJunkie

2 ай бұрын

Oh I agree that sounds like you had a really nice ride! Exactly! Thanks for watching!

@Hayabusagsxr1300

2 күн бұрын

Did you have to use the additional wires that he used on this write up?

@06VistaBlueGT1

Күн бұрын

​@@Hayabusagsxr1300 It's been a LONG time since I did this mod, but IIRC, I didn't use any extra wires. Just cut the extra plug I bought so the new wheel can connect to the car and my coworker (who is amazing at soldering) just soldered the wires together that were needed to make it work (color from the plug to the new steering wheel).

I wanted to go to school to be a mechanic but they need to get paid more for what they do 💯💯

@JunkyardJunkie

4 ай бұрын

I agree 100%, all the knowledge we have to obtain not to mention the fortune we spend in tools. But it’s still a good job. Thanks for watching!

Did this while swapping in a Kenwood head unit. Love it, all buttons work.

@JunkyardJunkie

Жыл бұрын

That’s awesome! I think it’s a great upgrade. Thanks for watching!

Dude! I did not see that air bag pop coming, great video by the way!

@JunkyardJunkie

Жыл бұрын

Hahaha that’s great! Thanks that means a lot. Thanks for watching!

This is cool! Glad you figured out how to get the wheel to work with the radio

@JunkyardJunkie

Жыл бұрын

I’m glad too I feel it makes a real difference. Are you about to do it? If so good luck. Thanks for watching!

@zombies418

Жыл бұрын

@@JunkyardJunkie potentially. I sold my last 3v but I’ve been wanting another one so I’ve been looking at ideas

I’m going to be doing this swap soon, great video!

@JunkyardJunkie

Жыл бұрын

Thanks! Good luck, it’s a great upgrade. Thanks for watching!

Good deal! Jump scare got me though haha

@JunkyardJunkie

Жыл бұрын

Haha I was hoping to get a few. Thanks for watching!

You just HAD to make my life better. Didn't you. XD Time to start saving up again... Thank you for this tutorial.

@JunkyardJunkie

Жыл бұрын

Haha XD. This is a must have upgrade in my book. I know you’ll love it. Thanks for watching!

@MonsterConrad

Жыл бұрын

@@JunkyardJunkie Do you intend to keep this video up for a while? I'd really like to reference it later on

@JunkyardJunkie

Жыл бұрын

Ya I don’t plan on ever removing it. So save it and watch it later. Feel free to ask for help if you ever need it.

You are the man! Thank you!

@JunkyardJunkie

10 ай бұрын

Glad I could help! Thanks for watching!

Fantastic, can you tell me how to donate? I couldn't have done this without your video!

@JunkyardJunkie

14 сағат бұрын

I’m glad I was able to help! Donations are always appreciated but please don’t feel pressured too. If you do though there is a thanks button under the video near the like buttons. Thanks for watching!

Hey man, great video!! I just got done installing mine and everything went well. Except for my cruise control doesn’t seem to work and I’ve gone back to make sure everything is wired correctly and it is. I was thinking that it might be because I’ve accidentally bought a 2014 Mustang GT steering wheel with a track pack. When I realized it was too late I already had the steering wheel in my hands so I assumed just buying the switch you used in the video would do the trick…it didn’t. Anyways, I would just like your opinion. Definitely earned a sub from me. Keep up the great work!

@JunkyardJunkie

Ай бұрын

Ya buying the switches should do it. Honestly I would double check every joint make sure everything has good connection. You can also look up to see the resistance when pressed. Best of luck. Thanks for watching!

the airbag video transition was clean lol

@JunkyardJunkie

3 ай бұрын

Hahaha I love it. Thanks for watching!

Thought I’d keep you up to date on the wiring for my 2010 upgrade to my 2006. I went ahead and removed all the unused wires in the connections. I also decided to remove all the harness tape to check the grounds due to others having horn issues. I’m glad I did. I had a loose ground at the factory splice and fixed it. I also did the others as well for preventative maintenance down the road. So far I think I’ve shacked it. One thing to note is splicing the original connection to the 2010 harness the harness is noticeably thicker. Took some patience to fit it in so it doesn’t interfere with the U-plate when tightening it. To others my thought is to offset the splices to give the harness a consistent thickness. This gives more flexibility to position the harness so there’s no kinks. Took me 6+ hours to do this and I’m installing it today. I’m OCD so now you know the rest of the story. 😮

@JunkyardJunkie

5 ай бұрын

Haha I’m glad to hear you’ve got it all finished up. I do agree with you staggering the connections would be a good idea to do. I hope you enjoy it! Thanks for watching!

@falconlawndart9597

5 ай бұрын

Finally got the Banshee back together. I installed the Pioneer DMH1770NEX, added a rear camera and topped it off with a trunk release in the console. Everything done per your videos. I did installed a PAC C2R-FRD1 on the Pioneer and then added the PAC SWI RC1. After all the upgrades I take a drive and the Air temp blend actuator goes out. The Pioneer 1770NEX is a great upgrade and I also added a Smart box adapter with Netflix,KZread and other apps preloaded. Next up will be interior LED’s. I want to send you a few photos but I can’t figure out how to. You nail it with all these videos I’ll be watching for new ones. Cheers

@falconlawndart9597

4 ай бұрын

Hello, I’ve tried your FB link and not having much luck. I’d like to message you about a issue with my 2006 banshee in regards to issues with the HVAC system blend doors. All of them are very funky after I replaced all except behind the instrument panel. I’d like to message you and get your opinion on this and another problem. You’re my go to channel and we appreciate what you do.

Outstanding. Thank You. Question.....Where did you get the carbon fiber look door panels? Thx

@JunkyardJunkie

Жыл бұрын

Thanks I’m glad it could help. As for the door inserts I got it online somewhere. But unfortunately, I can’t remember where now. Thanks for watching!

EXCELLENT and comprehensive tutorial. Got a sub from me for sure. There is so little out here on things like this, well at least this detailed. Do you happen to have a video on switching clusters? I have a 2007 S197 and did the Coyote swap, along with the engine came the ECU, /trans and the instrument cluster. I went to do the swap of the cluster and found that the plug in the back is different, that was a bummer. Any information on that would be helpful.

@JunkyardJunkie

3 ай бұрын

Thank you that means a lot. Ton of work goes into the videos. But, unfortunately, I don’t. I was getting ready to do a full coyote swap, along with the gauges, dash and door. But market went crazy and couldn’t find a donor vehicle for anything close to reasonable. But for the cluster I did find some good info on it at one time I will try to find it again. But best of luck! I’ll have to check out your progress if you’re uploading it. Thanks for watching!

@michaelkennedy2528

3 ай бұрын

@@JunkyardJunkie Thanks for getting back with me. Yeah, if you could find that information, that would be greatly appreciated. I have the entire harness out of the donor car, was hoping that it could be just a plug difference. I have yet to go through the donor harness to see if the plug is there. If you plan to do a Coyote swap, get with Matt Soppa, he has a channel " Make it Modular". There is a ton of knowledge there as well. he makes harnesses that are plug and play for the S197 Coyote swaps. i got one and all the gauges work, AC etc.. I just wanted the mileage to be the same as the engine at 36,000. Thanks again and keep me in mind if you run across that information.

I’m not the type of guy who rushes to put something together then have to do it over. My question is how long would one expect to spend on doing this upgrade right the first time? This is one of the best upgrade videos I’ve ever watched. I’ve never replaced a steering wheel with electronic options. Thank You in advance

@JunkyardJunkie

5 ай бұрын

That’s a good thing. So if you’re following along with the video and taking your time I could see a reasonable time frame being 4-5 hours conservatively. I really appreciate that I try to work hard in order to make it easy for everyone watching. I’d love to hear how it turns out for you. Best of luck. Thanks for watching!

@falconlawndart9597

5 ай бұрын

Absolutely sir! I’m looking for a mint condition wheel at this time.

I didn’t hook up the audio controls yet though (yellow and purple wires) or the arrow wires for the left side but I thought I wouldn’t need those for the cruise control to work

@JunkyardJunkie

4 ай бұрын

You don’t they will work without it. Make sure to follow my video and it’ll work. Hope this helps thanks for watching!

If I get the upgraded version with the rpm lights meter in the steering wheel for the 2010-2014 mustangs from dina performance would it work ?

@JunkyardJunkie

Жыл бұрын

I would think so but I can’t confirm. Please update me if you decide to do it. I’m really curious. Thanks for watching!

if i want to use the original radio do i need the “swi-rc-1”? What were the green wires under the steering column for the (purple and yellow) one?

@JunkyardJunkie

9 ай бұрын

The original radio can’t be controlled via steering controls. If you don’t mind that then you’re ok. As for the purple and yellow wires those are the new connections for the steering wheel buttons the old one didn’t have. Hope this helps. Thanks for watching!

What’s the blue and green wire for from the new side that you’re connecting to the black from the new side?

@JunkyardJunkie

4 ай бұрын

I can’t remember off the top of my head but you should be able to google it. Hope this helps. Thanks for watching!

Would this work on a base 2010 mustang? I know it’s a different year but mine only has the cruise control buttons and I’d really like to swap it with one of these

@JunkyardJunkie

Жыл бұрын

Yes it will work and is a much needed upgrade. Hope this helps. Good luck. Thanks for watching!

Where did you get the GT badge on the original steering wheel? The tribar one I have is starting to get scuffed really badly.

@JunkyardJunkie

Жыл бұрын

I got it off of eBay. Unfortunately it’s just a sticker decal but I do like the look. You can get it in the same color as your car. Here’s a link: www.ebay.com/itm/143440305809?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=cRY5UdgGQzy&sssrc=2349624&ssuid=TeVRrzBpTDS&var=&widget_ver=artemis&media=COPY Hope this helps. Thanks for watching!

Sick. Want.

@JunkyardJunkie

13 күн бұрын

Go for it! It’s a great upgrade. Thanks for watching!

@green3488

13 күн бұрын

@JunkyardJunkie I think it might fix my cruise control too. And my old steering wheel has screwed up silver pieces. Any chance you still have your old one?

I don’t understand what the purpose of that green ford wire connector thing. Is it for the cruise control to work? Or for the audio controls?

@JunkyardJunkie

Күн бұрын

It’s a ground. Hope this helps. Thanks for watching!

Does anyone know if you can somehow put an 18-23 on I don’t need any of the controls synced I just care for the wheel itself

@JunkyardJunkie

Жыл бұрын

I’m not sure. I believe the fitment isn’t correct unfortunately. But, anything is possible just depends how much you want to put into the project. Best of luck and hopefully someone that’s done it will comment. Thanks for watching!

The only thing missing is the actually connecting the wires to the SW I-RC-1 interface but everything else perfect

@JunkyardJunkie

Жыл бұрын

That’s not bad of a job at all you can do later. I’m glad you got it knocked out. Nice upgrade right? Thanks for watching!

@bolodelong968

11 ай бұрын

Did you connect the made extended purple and yellow wire to what colors on the swI rc interface

Got another question. What gauge wire (red/blk) did you use from the steering wheel to the PAC? I have 22 it’ll carry the load but need your advice. Thank You in advance cheers.

@JunkyardJunkie

5 ай бұрын

I used 18 gauge wire but 22 should still work just fine. Hope this helps. Thanks for watching!

@falconlawndart9597

5 ай бұрын

Thank you! I’ll have the job done tonight and get some pics and a video out to you. Cheers

I'm adding the 2010 steering next week and decided to keep it simple by using the same radio you used in your How to Install video. Can you send me your radio model? Thank you in advance

@JunkyardJunkie

5 ай бұрын

The exact one I have is the pioneer avh-1400nex. It’s pioneer make good radios with Apple care play and Andriod auto. Hope this helps. Best of luck. Thanks for watching!

This is a 1000x better! I need someone in Iowa to do this and the radio replacement!

@JunkyardJunkie

9 ай бұрын

Right? Defiantly a must have upgrade in my book. To bad you’re not down here I would help you out. Best of luck. Thanks for watching!

@jondoough

9 ай бұрын

@@JunkyardJunkie the other upgrade I want is automatic lights... have you looked into this?

@JunkyardJunkie

9 ай бұрын

I have, I’m making a video on another car right now about it. The simple way to make auto headlights is tie a relay into your circuit. Hope this helps. Thanks for watching!

How did you change the lights to the climate controls ??

@JunkyardJunkie

Жыл бұрын

I made a full video on how to do it to any color you want. Here’s the video: How to change all interior lighting LED's to a different color kzread.info/dash/bejne/f2mauKVxY7PJqM4.html Hope this helps. Thanks for watching!

How did you map the buttons? For example can i make the voice button for voice commands?

@JunkyardJunkie

11 ай бұрын

Check my other video: kzread.info/dash/bejne/qGWL0rGuhMy0lco.html Go to 25:55 I cover this well. But yes you can from the list of functions program them for whatever you want. I want the up arrow to answer calls I could do that. Hope this helps. Thanks for watching!

Someone is selling me a brand new 2015 steering wheel with airbag for a good price, do you know if this wiring hack would also work for that model? I have a 2006 Mustang and I would love to have all the new buttons plus a brand new steering wheel and airbag (I have one of the old airbags that had the recall but I live in europe and my car was imported from USA so I cannot get the recall).

@JunkyardJunkie

Жыл бұрын

There may be fitment issue. I know I’ve seen a lot say you won’t be able to get the button to work properly. Hope this helps. Thanks for watching! Also I would for the airbag reach out to ford I believe they will still help you out because I believe they’d still be liable.

Can you do the same with a newer steering wheel like 2016 look in the 05?

@JunkyardJunkie

Жыл бұрын

Anything’s possible. but I do know it’s got a lot more useless buttons for controlling the screen and etc. hope this helps!

@javaughnwhatley9755

Жыл бұрын

Long as it goes on and turn is all I need no need for the controls lol and yes this help me out thank you

So if I just want horn and cruise control I can skip the part where WPT-1242 is used?

@JunkyardJunkie

Жыл бұрын

Yes, that’s correct. Hope this helps. Thanks for watching!

@Williefisthergash

Жыл бұрын

Excellent video.

@JunkyardJunkie

Жыл бұрын

Thank you that means a lot!

What does soldering the Blue and Green to the Black do? I assume the Black is a common ground? And can I just leave the three wires separated and capped? Or just ground the Black and leave the others capped? Thanks.

@JunkyardJunkie

8 ай бұрын

They’re all getting grounded. If you leave them separated then you won’t have a horn or any controls working. Hope this helps. Thanks for watching!

@johnl791

8 ай бұрын

Thanks so much for the quick reply!! I've got to say that I've done a ton of mods to my 2006 Mustang over the past 17 years and this may possibly be the most thoughtful how-to video I've ever seen.@@JunkyardJunkie

@JunkyardJunkie

8 ай бұрын

Thanks that truly means a lot! That’s a long time to be putting mods on id love to see the outcome.

Is this going to work with the more sporty flat bottom steering wheels?

@JunkyardJunkie

Жыл бұрын

Yes as long as it’s for the 2010-2014 year model it will work. Hope this helps thanks for watching!

Thank you for making this! I have a 2010 base and I would really like to swap the premium wheel but I’m not sure if 05-09/2010 would be a different process? You think I could get it to work following this video?

@JunkyardJunkie

4 ай бұрын

So the 2010 is the unloved year lol. But I believe it is the exact same steering wheel connectors as the 05-09. I would double check the connector make sure it lines up like I showed. Then you should be good to go. Hope this helps. Thanks for watching!

@ethanwestermeyer77

4 ай бұрын

@@JunkyardJunkie I will take your word and give it a shot, hopefully it works! it definitely is the unloved year lol I had a 2008 but I like the 3v engine so I had to get one

@JunkyardJunkie

4 ай бұрын

I totally understand. Let me know how it goes

@ethanwestermeyer77

9 күн бұрын

@@JunkyardJunkiehey man just wanted to let you know, I did the swap on my base 2010, you don’t have to wire anything! It all works just have to plug it in, I got lucky

What if I have the one with “ok” button and the directional arrows, Instead of that cruise control set up you have there? If I follow the same process will it work?

@JunkyardJunkie

6 ай бұрын

I haven’t got to try it. But, I do know I’ve seen a lot of people say it won’t work with those controls. Hope this helps. Thanks for watching!

@brennancollins1

6 ай бұрын

@@JunkyardJunkie do you have a part number for the harness in the steering wheel you used. I’ll just order that same set of buttons and harness you got but I can’t seem to find it online.

@diegoolmos4385

2 ай бұрын

I’ve got the same steering wheel instead of the cruise control pads I’ve got the toggle pads , my question would be . Would the audio controls and lighting work even if the cruise controls don’t ? Great informative video! Greetings from Texas ! Thanks in advance!

How did u change the colors on the ac controls from green to blue? In my mustang theyre green.

@JunkyardJunkie

5 ай бұрын

I made a whole video on how to do it. Here’s the link: How to change all interior lighting LED's to a different color kzread.info/dash/bejne/f2mauKVxY7PJqM4.html Hope this helps. Thanks for watching!

@Bg83w

5 ай бұрын

@@JunkyardJunkie much obliged 🙌🏽

Hello friend, I'm in Mexico and I can't find the connector you mentioned that connects under the clockspring, is there any way to replace those connectors

@JuanCubeYT

Жыл бұрын

Like the swi c 1 interface, I haven't seen where you put it or how it goes? Maybe I can't find it, is it 100% necessary to make the controls work?

@JunkyardJunkie

Жыл бұрын

Here’s the video to me installing the radio and I go over it more(How to install a radio (Full Guide) kzread.info/dash/bejne/qGWL0rGuhMy0lco.html). I also have a video on the swi rc 1 install if you need to know how to do that. But yes you will need the swi rc 1 or some kind of steering wheel control interface. As for not finding the bottom plug did you remove the bottom shield? If you take some pics and send to my fb I’ll take a look it should be there. Hope this helps. Thanks for watching!

@JuanCubeYT

Жыл бұрын

I see, if the 2 cables of the wpr harness are connected directly to the radio where the "key 1 and key 2" are, will it not work?

@JunkyardJunkie

Жыл бұрын

Yes it should work like that. I just tried to make a dummy proof way to do it. But sounds like you got it! Let me know how it goes

How many wires didn’t you use from the pac system to get the buttons to work and what did you do with the wires that were supposed to go to the apim? I am trying to do the same exact thing, but with a android head unit.

@JunkyardJunkie

Жыл бұрын

I believe I had to use 3 wires (if you look at my how to install a radio video you see the wires I use). But if your using a different head unit you’ll have to go to the pac website and see what that head unit needs. Some head units you take the two wires and plug it directly in. Best of luck! Thanks for watching!

@user-we4jj9ob9x

Жыл бұрын

@@JunkyardJunkieI got one more question if you don’t mind, where does the black and red wire that is connected to the wpt-440 on the bottom of the clock spring connect to on the other end? The head unit or?

@JunkyardJunkie

Жыл бұрын

Mine connected to the pac module. But it depends what radio you got. For the most part it will connect to the pac module on most radios.

@user-we4jj9ob9x

Жыл бұрын

@@JunkyardJunkie okay thanks man!

What was the process you used to install the center GT emblem? Did you take the old emblem off first?

@JunkyardJunkie

Жыл бұрын

This one’s yellow but I got this decal just with silver. www.ebay.com/itm/392885298205?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=cRY5UdgGQzy&sssrc=2349624&ssuid=TeVRrzBpTDS&var=&widget_ver=artemis&media=COPY I wanted to find the actual silver gt badge but I couldn’t find it anywhere. So the decal worked great for me. Also didn’t have to take it off. Hope this helps. Thanks for watching!

@williammcgee1524

Жыл бұрын

Thanks but I was actually wondering how you installed it? Did you just stick it over the original emblem or remove the original first? Thanks

@JunkyardJunkie

Жыл бұрын

Just sticks right over the old

@HPX584

Жыл бұрын

@@JunkyardJunkie how is the sticker holding up to today?

Do you know specifically what year that new steering wheel was

@JunkyardJunkie

4 ай бұрын

I don’t unfortunately.

How do u change the climate control lights an door lock an window switch?

@JunkyardJunkie

Жыл бұрын

Here’s the video I made on it: How to change all interior lighting LED's to a different color kzread.info/dash/bejne/f2mauKVxY7PJqM4.html Hope this helps. Thanks for watching!

@kamryn7496

Жыл бұрын

@Junkyard Junkie I got blue california special I think all blue leds would match perfect I'll check it out

@JunkyardJunkie

Жыл бұрын

Ya that would look amazing. I love the upgrade and it’s not that bad to do. Let me know how it turns out.

okay so I don't know if you can help with it at all but I wired everything the same way, got the Pac unit working but the only button that works is the okay button, other than that everything is fine, any help is appreciated

@JunkyardJunkie

4 ай бұрын

Ya I had the same problem you have to push EXTREMELY hard to make it actually register when programming the pac but once that happens you won’t have to press hard when actually using it. Hope this helps. Thanks for watching!

@koryburdette7478

4 ай бұрын

@@JunkyardJunkie yeah I got it working, made me feel really stupid because I went back and triple checked all the wiring lol, thank you for the legendary videos, they help more than you know

@JunkyardJunkie

4 ай бұрын

Hey don’t feel bad it really shouldn’t be like this but for some reason it is haha. But hey I really appreciate and I’m glad I’m able to help! Thanks for the support!

are those two yellow cables for the horn?

@JunkyardJunkie

9 ай бұрын

No those yellow cables are for the airbag. Be carful with them. Hope this helps. Thanks for watching!

Question what year won't work on my 2007 gt it doesn't matter if the buttons are not working I just want the Coolest steering wheel on

@JunkyardJunkie

4 күн бұрын

So any will work and be able to use cruise control. If you want radio functions you’ll want one that looks like mine. So if you want to just cosmetic then any will work. Hope this helps. Thanks for watching!

@fuentesjesse007

4 күн бұрын

@@JunkyardJunkie appreciate it the info 👍👍👌🙌

My guy you did good but I need help with one more thing 😂💀can I get a link too the wiring items

@JunkyardJunkie

Жыл бұрын

Thanks, sure bud here’s the wpt1242: www.amazon.com/Motorcraft-WPT1242-Temperature-Connector-Assembly/dp/B009B5STYE Here’s the pac: www.amazon.com/PAC-SWI-RC-Steering-Control-Interface/dp/B004HKBY8G/ref=asc_df_B004HKBY8G/?tag=hyprod-20&linkCode=df0&hvadid=312153141514&hvpos=&hvnetw=g&hvrand=4118565173822072954&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1015289&hvtargid=pla-436369916345&psc=1 Hope this helps thanks for watching!

@ngbb3x__777

Жыл бұрын

Could I pay you too buy my do the work and ship it too me

Hi sir which music stereo display are you using ?

@JunkyardJunkie

6 ай бұрын

I’m using the pioneer nex unit I believe it’s the 2550 one. But you can look at my installing a radio video. I install it on this car. Hope this helps. Thanks for watching!

@mantarsingh4893

6 ай бұрын

thank you

if i dont want the cruise control an volume buttons to work will my horn still work?

@JunkyardJunkie

9 ай бұрын

Yes you can have the horn still work without cruise and volume. I’d recommend hooking them up though just because that’s one of the main reasons to upgrade. Hope this helps. Thanks for watching!

@MiguelMartinez-zk9wk

9 ай бұрын

@@JunkyardJunkie thanks man 👍

@JunkyardJunkie

9 ай бұрын

Anytime!

Does anyone Sell a pre-made connector by any chance?

@JunkyardJunkie

Ай бұрын

Not that I know of. But, I do think there is a demand for it. Thanks for watching!

I’ve got a 2012 with that old wheel with only cruise, is it the same process?!?

@JunkyardJunkie

6 ай бұрын

Yes you have the base model v6? It should be the same. Thanks for watching!

@derekkrueger

6 ай бұрын

Nope v8 5.0 I was curious about it too

@JunkyardJunkie

6 ай бұрын

That’s strange I thought the v6 base model was the only one. Well you learn something new everyday haha best of luck

Do u know if I’m still able to do the recall

@JunkyardJunkie

Жыл бұрын

Hey, go to the fords page to check. www.ford.com/support/recalls/ it pretty much effected almost all of them and they’ll fix it for free. But the website above you can check

where'd you get the "GT" chrome door sills, i cant find them online

@JunkyardJunkie

Жыл бұрын

www.ebay.com/itm/300875705336?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=qlLeUGdTSKu&sssrc=4429486&ssuid=&var=&widget_ver=artemis&media=COPY Hope this helps. Thanks for watching!

@HPX584

Жыл бұрын

@@JunkyardJunkiehey how is that sticker holding up? Any peeling?

@JunkyardJunkie

Жыл бұрын

It’s doing good. the top isn’t a sticker. It really should be good for years to come. Hope this helps. Thanks for watching!

@HPX584

Жыл бұрын

@@JunkyardJunkie oh if it’s not a sticker then what is it

Does the old s197 airbag fit the 2014 steering wheel?

@JunkyardJunkie

3 ай бұрын

Yes it’s the same. Hope this helps. Thanks for watching!

@3vmonte

3 ай бұрын

@@JunkyardJunkie thank you sir! I will be pulling my steering wheel out of a junkyard tomorrow! Thanks!

@JunkyardJunkie

3 ай бұрын

Let me know how it goes! Best of luck.

that shit got me good😂

@JunkyardJunkie

11 ай бұрын

Hahaha 😂 that’s awesome! Thanks for watching!

How much would you charge for this change-out? What state are you at?

@JunkyardJunkie

3 ай бұрын

I’m in north ga. Where are you located maybe we can work it out. Thanks for watching!

Is there an email I can message you from? I have some questions for ya before I start this! I just picked a steering wheel in great condition

@JunkyardJunkie

Жыл бұрын

Shoot me a message on fb I’ll try to help you. Here’s the link and thanks for watching! facebook.com/Junkyardjunkieofficial?mibextid=LQQJ4d

is there a vehicle i can extract these wpt connectors from?

@JunkyardJunkie

9 ай бұрын

Yes there should be some to grab them off of. I don’t really know of the top of my head though. Best of luck. Thanks for watching!

@arnoldwilson3719

9 ай бұрын

@@JunkyardJunkie thanks for the reply. I did notice that tge original 05-09 harness connector is almost the same you just have to remove the square locking tab and add maybe some rtv to keep it from moving.

The airbag seen scared me to death man I'm glad it wasn't real Can I ask you what car has the same cruise control and volume button?

@JunkyardJunkie

3 ай бұрын

Hahaha It came out of the newer (2010/11-14) s197 but they’re easy to find. I’ll look on eBay for you real quick. www.ebay.com/itm/186338932031?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Jwo_CDvvQDG&sssrc=4429486&ssuid=TeVRrzBpTDS&var=&widget_ver=artemis&media=COPY As long as you find the wheel you can just buy new switches to put in it. Hope this helps. Good luck! Thanks for watching!

@2Nelly4

17 күн бұрын

​@@JunkyardJunkieI really really REALLY appreciate your help your time your response to me thank you for much I you answering my question is a million time better prize for me than finding the answer I'm learning a lot from you I changed the water pump by following your guide and now I'm trying to do the radio led's and the wheel control and adding a Bluetooth to my teen dream car mustang gt s197 Long story short... THANK YOU 🙏🏼

how much would you charge to have this new wiring harness made and ship?

@JunkyardJunkie

6 ай бұрын

Hey sorry a lots going on now for me to be able to do it. Is there a reason you don’t want to do it? If you don’t like to solder you can always use heat shrink butt connectors.

@xXstevieOo

6 ай бұрын

@@JunkyardJunkie simply put, I'm not confident in my ability to get the wiring done correctly. And I'd rather have someone with the knowledge and patience to get it done.

@JunkyardJunkie

6 ай бұрын

I understand maybe here in a few weeks I’ll be able to do it for you for free. Just have to give me the harnesses and stuff.

@xXstevieOo

6 ай бұрын

@@JunkyardJunkie I understand, and thank you. Let me know when it'd be a good time.

WERE DID U GET THE STEERING WEEL?

@JunkyardJunkie

6 ай бұрын

Haha it’s from any Mustang 2010-2014. You can get them at your local pull a part or buy off eBay. Hope this helps. Thanks for watching!

I Definitely jumped 🤣🤣

@JunkyardJunkie

Жыл бұрын

Haha awesome! I’m glad I’ve gotten a few with it. Thanks for watching!

How did u get all your buttons to be blue

@JunkyardJunkie

9 ай бұрын

Hey, I did a full video on how to do it. It really changes the look and I think it’s a great upgrade. Here’s the link: How to change all interior lighting LED's to a different color kzread.info/dash/bejne/f2mauKVxY7PJqM4.html Thanks for watching!

So I did this and checked everything more then ones and still not horn or anything working anything to help

@JunkyardJunkie

Жыл бұрын

If you followed everything I showed it should be working. The main thing I would say to check is the grounds. There’s one on the u shaped metal and one under it. If those are not hook up it will not work. Hope this helps. Thanks for watching’

@cocoakyle6447

Жыл бұрын

same problem. i didn't use this tutorial, i purchased a new clockspring because the wiring wasn't working very well either, even though everything USED to work properly. you may have broken your clockspring (which stinks)

@pluffymarshmello

Жыл бұрын

I was running a multimeter on it for ground and I was getting nothing and am not completely sure how to fix it

@pluffymarshmello

Жыл бұрын

Also did follow all steps great video just have those problems

@JunkyardJunkie

Жыл бұрын

Leave the airbag out. Run a wire from a ground to the two ground points and then try and see if it works. If it does you’ll have a a idea of what to do. Like cocoakyle said I hope you didn’t break the clock spring.

It would be a lot nicer if someone just made an adaptive wire kit to go with the new wheel and controls. Would make this a helluva lot less intimidating and I might actually consider this upgrade. Don’t really know shit about wires or soldering and as a Daily driver, my Mustang needs a functioning airbag.

@JunkyardJunkie

Жыл бұрын

It would be really awesome if they did just make a adapter. But, I really do think you should do this upgrade. It seems daunting but I assure you it’s no where near as bad as you think. Just follow the steps and you’ll have it! Also if your not good at soldering you could always use solder connectors (just heat them up) or butt connectors. As for functional air bags the first two connectors you see me take off are to the air bags. They don’t get messed with at all. So your air bag will work properly. Hope this helps. Thanks for watching!

Scared me with the airbag😂😂

@JunkyardJunkie

9 ай бұрын

😂😂 . Thanks for watching!

r u fr about the recall ik there was one

@JunkyardJunkie

5 күн бұрын

Yes it’s effected an absurd amount of cars form the 90’s all the way up till around 2018 I believe. Ford will have someone come to your house for free to replace the airbags. Hope this helps. Thanks for watching!

@ThugMuffin10

4 күн бұрын

@@JunkyardJunkie appreciate the time out of day to help me and leave the comment💪 I’ll check the vin number and see if someone did the recall already🤯 I knew it was a isssue but I didn’t expect it to be something like that that could get you working on it not expecting

Bahahahahaa you suck. That airbag pop scared the hell out of me and now I will be paranoid while removing mine 😂😂😂😂😂😂😂😂😂😂

@JunkyardJunkie

11 ай бұрын

😂😂😂. That’s awesome! But don’t worry they are safe. Just remember to leave the battery unhooked. Good luck and thanks for watching!