I did the 2010 steering wheel upgrade to my 2006 GT back in March 2024. Awesome! Perfect video everything worked the first test. I initially had a boss (junk) installed and the kit came with the C2R-FRD1 in the harness package. Bought the pioneer NEX and I ordered the SWI - RC1 for the steering wheel upgrade and new radio. The wiring diagram shows wiring from the SWI and through the C2R. I removed the C2R and no pops an we’re enjoying the radio now. Thank you! Cheers

@JunkyardJunkie

Ай бұрын

So personally I would bypass the c2r as the more things you have, the more failure points you could potentially have. As for the 12v to 5v step down isn’t needed unless you are talking about for the radio side if you have the upgraded system. Hope this helps. Best of luck. Thanks for watching!

@falconlawndart9597

Ай бұрын

You nailed like you always do. I took the C2R out and wired the RC-1 in and it ops checked perfect. I didn’t splice the 12v-5v step down resistor and we have a mighty fine sounding stereo in my 2006 GT Banshee project. Thanks again, I enjoy your videos. Cheers

Dude epic video thank you so much I’m putting one in my mustang soon

@JunkyardJunkie

Жыл бұрын

Thank you and good this should be a great video for when you do. Good luck and thanks for watching!

so I don't mean to intrude or anything, if you hook up the pac module and it flashes once then turns off, turn the 1-8 switches to up and program the buttons to each function like he did in this video, it had me baffled for so long, I had everything wired but the module wouldn't do anything, until I switched them all to up (the 4 on the side stay the same I believe)

@JunkyardJunkie

4 ай бұрын

Well put! I know the info for the switches I believe all was available on the pac website. Plus their customer service is always great. Thanks for watching!

Thanks!

@JunkyardJunkie

23 күн бұрын

Thank you! I really appreciate it!!!

@scottwilson9229

23 күн бұрын

Hi, there was not a thanks button on the steering wheel retro vid, but I improvised.

@JunkyardJunkie

23 күн бұрын

Haha very smart! Not sure why there wasn’t one on that video. Enjoy that nice new steering wheel!

ive done everything you have done in both mustang videos, but cant seem to get the pac module to work properly any suggestions/help is appreciated

@JunkyardJunkie

Жыл бұрын

Yes first question when you are running through the learn button procedure does it register that you are clicking the buttons like in the video?

@austinrandle6612

11 ай бұрын

@@JunkyardJunkie i never got the notification that you replied, i can install everything but the pac module for some reason is not retaining power , i.e. when i put my car in accessory mode ill see the lights but then they will go blank, 06 mustang swi-rc-1 module and a boss audio systems radio (the radio i have is damn near close to what you are using in the video(s))

@JamalE-ox9is

8 ай бұрын

​@@JunkyardJunkieaq

25:07 Hi, When you say Yellow and Purple go to White and White/black, what are the white and wht/wht wires for? My harness looks a little different than yours. TYIA

@JunkyardJunkie

9 ай бұрын

So, in this case I changed out the 2005-2010 steering wheel for the 2011-2014. This gives you more controls for the radio. Which is what I’m referencing, there’s a yellow and purple. For that video check this out: How to retrofit 2010+ Mustang steering wheel into a 2005-2009 Mustang S197 kzread.info/dash/bejne/k5OYqstpe9ufhJc.html As for the rest of the harness, everything else should be the exact same. Hope this helps. Thanks for watching!

What do you hook up the black wire to on the swi Rc 1 on the side with the brown blue black and headphone jack thing? Do I just hook it up to a a ground? Also what about the blue and brown?

@JunkyardJunkie

5 ай бұрын

I’ll be honest I can’t remember off the top of my head. but you can always go to their website and it’ll show you what they go to and which ones you need to use. Hope this helps. Thanks for watching.

When you say the white with black will go to the yellow, the text you placed on screen says the opposite. Which one is correct?

@JunkyardJunkie

Жыл бұрын

The one on screen is correct. I realized I messed up when editing so I corrected it with text. Hope this helps. Thanks for watching!

What does it mean when the swi Rc 1 is orange and flashing red when I’m done programming

@JunkyardJunkie

5 ай бұрын

It means that you didn’t make it all the way through programming so you’d have to do it again. Make sure to press the buttons hard when doing it, and you should see it blink green whenever it registers that you pressed one of the buttons. Hope this helps. Thanks thanks for watching!

Hey so I followed this guide while wiring up my radio and the PAC unit will stay on while the car is off causing my radio to stay on and kill my battery. What could I do to fix that? Because I love the steering controls.

@JunkyardJunkie

Жыл бұрын

I have to ask first, it was fine before hand correct? If so what I would do is go back into the unit and the power wire for the device make sure it only has 12volts with the key on. Your radio will have a 12volt constant and a acc 12 volt. Make sure it didn’t some how get mixed up. Double check everything. Let me know what you find and we’ll figure it out. Hope this helps. Thanks for watching!

@dakotamcghee8421

Жыл бұрын

So I went back and looked at everything and all the wires were the same as what you did color wise at least. I’m also using a Pioneer head unit so I doubt there would be much variation in the wiring color scheme. Do you think I could run the power ire’s from the PAC unit to the Remote Wire on the radio like I would do an amplifier?

Hey guys make sure you ground your YELLOW steering wheel wire (the wire you connect to your solid white swi Rc 1 wire) it didn’t work till I did this. Without doing this your swi Rc 1 can’t ground the voltage to get it to a specific voltage to know what button you’re pressing. To do this I just cut the solid white swi Rc 1 wire coming from the yellow steering wheel wire and twisted those wires together put them in a butt connector, crimped it and put a wire that was connected to a ground in the other side, crimped it and steering wheel controls work now

@JunkyardJunkie

5 ай бұрын

That’s strange I havnt had to do that on any of the ones if done. But I do know the trouble I had is you had to press hard on the buttons when programming them or they didn’t give the proper signal. But I will remember this if it ever doesn’t work one day. What’s your year model?

@user-jn9tm9zd1e

5 ай бұрын

@@JunkyardJunkie you weren’t joking when you said you really REALLY have to press hard cuz it has to know what signal it is for like a good second so the signal can stabilize fully but I heard someone say online somewhere else that it takes away the voltage and sends it to a ground and that’s how it changes the voltage so it knows what button is being pressed. I have an 06 mustang but if you didn’t do that then idk but when I did that it seemed to work better but I’m still not 100 percent sure but the talk, hang up, and ok button will not register at all no matter how hard I press which is weird because I thought those buttons were hooked up to the same wires (purple and yellow) as the rest of the buttons on the right side

@koryburdette7478

4 ай бұрын

wait wouldn't that be connecting a power to ground though? I thought you weren't supposed to do that? did you just take the white wire and add it to any ground wire nearby? any help is appreciated, i cant get any buttons except for the okay button to work

@user-jn9tm9zd1e

4 ай бұрын

@@koryburdette7478 what year is your steering wheel? Mine won’t work because it’s the wrong year and all the buttons don’t send the right voltage but the only ones the work on mine are the volume up and down, forward, backward, and the music note button and the rest don’t work but that’s because mine is a 2014 steering wheel so I need to get either the switches or the switches and the wiring harness from the 2012 but I think all I need is the switches from the 2012 and then it will work because I think they put more and different types of voltages in the 2014 because there’s more buttons (the up and down arrows and ok button on the left and the cruise control buttons are different so I think they changed a lot of the voltages around so I think just get the 2012 mustang steering wheel switches and put em in plug em in program it again and it should work just make sure you press REALLY hard for like almost for a full second when you program it because the voltage that it detects needs to level out and be spot on so the pac module knows exactly what to memorize and I think that should work

@koryburdette7478

4 ай бұрын

@@user-jn9tm9zd1e my wheel came off a 2010 i believe, same one in the video here, i did everything exactly the same but only my okay button works, its sending me for a loop, stressing me out honestly

I did everything you did in both video but my pac contol won’t stay on shuts off after about 30 seconds any ideas?

@JunkyardJunkie

6 ай бұрын

When you’re pressing the buttons on the steering wheel is it flashing on the pac module?

@mustangforlife3372

6 ай бұрын

When I key the car on the pac works it lights up and the button works then the lights on the pac cuts off and no buttons work

@JunkyardJunkie

6 ай бұрын

I would check the wires first and make sure it has power still going to it once it kicks off. You can also contact pac directly they’re are extremely helpful. They may replace the unit if it happens to be faulty.

If I choose to not use the control pac would the steering controls still work ?

@JunkyardJunkie

Жыл бұрын

Without pac your stereo controls won’t work (unless you have a radio that ties it in to it). But if your asking will the cruise control and non stereo buttons work, then the answer is yes. Many people swap the steering wheel without doing steering wheel controls. I would do steering wheel controls to have full experience but you don’t have to. Hope this helps. Thanks for watching!

@cesarkill5075

Жыл бұрын

@@JunkyardJunkie if I was to pair this with the Dinavin radio system would the same process apply as far as the wiring ? Also the first conector we make with the red and black conector that will only go connected towards the control pack correct ?

@JunkyardJunkie

Жыл бұрын

Dinavin radios are really popular. You’re suppose to be able to hook up to the back of the radio using the yellow and purple wire. But I know a lot of people have trouble getting all controls to work. So I would recommend pioneer or something similar for full functionality.

@Realfox37

2 ай бұрын

@@JunkyardJunkiewhat about is brand “Dynavin”

I’m stuck at the part at 24:56 please help… I don’t know what to do

@JunkyardJunkie

Жыл бұрын

24:56 I’m putting the radio back in? Or do you mean right after that, the two wires? If so those come from my other video where I upgraded the steering wheel to a 2010+ wheel. Here’s the link for that: kzread.info/dash/bejne/k5OYqstpe9ufhJc.html Hope this helps. Thanks for watching!