Cruise control lever kit Ebay - ebay.us/5qSnVH Tools used : Snap on Pic set - ebay.us/iMhlnL Wobble Allen socket set - ebay.us/yGxJVt Torx screwdriver set - ebay.us/BAROg0 Triple Hex set (steering wheel bolt) - amzn.to/3gCBcKx Socket Set - ebay.us/byjsjY Snap on verus pro diagnostic scanner - ebay.us/6ki0CJ Wire strippers - amzn.to/3idUjuT Snips - amzn.to/30AI0CI Crimpers - amzn.to/2C3HZhh Heat shrink connectors - amzn.to/3fB6hwI Long reach torx socket - amzn.to/3kjJJo2

@guilhermerodrigues4624

3 жыл бұрын

Very nice video. Very professional indeed.

@diydaly

3 жыл бұрын

@@guilhermerodrigues4624 thanks for the comment , much appreciated

@sawyerreign6628

2 жыл бұрын

i guess Im asking randomly but does someone know a tool to get back into an instagram account..? I was stupid lost the password. I would appreciate any assistance you can give me!

@kaydenjase6917

2 жыл бұрын

@Sawyer Reign instablaster =)

@sawyerreign6628

2 жыл бұрын

@Kayden Jase I really appreciate your reply. I found the site through google and Im trying it out now. Seems to take a while so I will reply here later when my account password hopefully is recovered.

Easy to follow, thanks

@diydaly

3 жыл бұрын

Thanks 👍👌

Great video. Thank you.

@diydaly

2 жыл бұрын

Thanks 👍👌

Great video.

@diydaly

3 жыл бұрын

Thanks, Glad you enjoyed it :)

Awesome cheers for the vid 👏🏻

@diydaly

3 жыл бұрын

Thanks for the comment , much appreciated 👌👍

What a great vid. Thankyou 👏👏

@diydaly

3 жыл бұрын

Glad you liked it , thanks for the comments .. much appreciated 👍👌

@stuartj2947

3 жыл бұрын

@@diydaly returning to the comments section again days after first watching your vid. I'm blown away with the time and information you have been providing 😉

@diydaly

3 жыл бұрын

@@stuartj2947 thanks again mate , I only started my channel in June last year so the feedback is nice to hear :)

Awesome thank you

@diydaly

9 ай бұрын

No problem!

Nice video and described very well! Do you think I can fit a cruise control on a b6 3.0 v6 petrol engine? Thx!!!

@diydaly

3 жыл бұрын

Thanks for the comments :) . Yes it can be done on the B6, it depends on which type of steering module you have as to wether or not you need to run a wire from the engine ecu to the steering module or not.. if you have the correct module to suit cruise it’s a lot easier.. if you check out the links to rosstech site in the description it’s explained quite well 👍

Doing both dis and cruise next week to the b6.

@diydaly

3 жыл бұрын

Good stuff 👌 I’m well glad I did the cruise control 👍

@carlsgarage2023

3 жыл бұрын

@@diydaly Fantastic video. Very helpful. Keep it up!

@diydaly

3 жыл бұрын

👌 thanks for the comments , much appreciated 😁

Hi great video, I successfully fitted and coded my cruise and diss in following every step of this video 🙂. The only problem I have if anyone can help is I have a yellow traction light on the dash. I’ve driven it for a few days and the light still hasn’t gone off. I did use a different scrib when I did the installation. Any ideas? I have access to the same snap on tool you have. Thanks Andy

@diydaly

2 жыл бұрын

Hi Andy , glad you got it all installed mate 👌👍.. what fault codes have you got ? You may need to calibrate the steering angle sensor

@4432andy

2 жыл бұрын

Sorry only just seen this reply. I had to do a simple calibration like you said and it worked perfect thanks 🙂

if i open my steering Colom tomorrow what would i need to see to tell if i need the full squib or the cruise control stalk

@diydaly

Жыл бұрын

It’s do do with the numbers on the steering ecu

My 2005 1.9tdi doesn't have the controls on the steering wheel so would I need to get a new steering wheel aswell as the cruise control and dis stalk.?

@diydaly

2 жыл бұрын

You wont need a new steering wheel, but you will need the module

Hi. Want to fit Audi genuine reverse parking sensors on B7. Sensors are already installed in the bumper but no wiring. Can you help with this? Many Thanks

@diydaly

3 жыл бұрын

Hi sorry for the delay in replying! I’ve been looking into this for you but can’t find much info... there are lots of coding options but I’m not sure about the wiring.. if I can find some more info i will let you know 👍

Tried this on my b7. Picked up the correct modules, disconnected battery and swapped over. Nightmare started...steering angle sensor required calibrating which wouldnt seem to work, sussed that in the end but lost power steering. Followed all the rosstech stuff. Still got no power steering or cruise. Did reseach...go to 44 steering assist and set the level..easy (if you dont get an error 'no access'. If u want this doing take to a pro.

The file for coding it is not available on the page anymore. Any chance to get a new link for it please?. Awesome video and well explained.

@diydaly

2 жыл бұрын

Thanks for the comment, arr wasn’t aware of that! Have you been on the rosstech site?

@NikoRad987

2 жыл бұрын

@@diydaly no, any chance to have a link for it please

Nice job easy to follow I have A4 b6 an I hava ful BC option but I don't have a Cruise Control and my modul is whit Q same as yours ... If I do the same as you to put a cruise control did I must cut a wire and conect on Spedometar as you are or not ?? You do this because of Cruise control or BC option ??

@diydaly

3 жыл бұрын

Thanks for the comments , much appreciated.. 👌👍, as you have full DIS I believe you shouldn’t need to cut and earth the wire.. the only reason for the wire being cut and earthed is to stop the washer fluid level warning coming up. I think the best thing you could do is fit the cruise control first and if you don’t have the warning come up then you won’t need to do the wire 👍

@Maximus_Meridius

3 жыл бұрын

@@diydaly Hmm I see now whay you cut a wire 🤏 can't you just Shut down off in ECU mod or something I mean four Washup sensor lewel warning is'n that a Easy way ? Before this car I drive Laguna 2 😂😂Every time blink a service light 4 tire pressur sensor ....I just go to ECU mod end shot down that option ..

@diydaly

3 жыл бұрын

Haha bet you prefer the Audi to the Laguna! I’m not sure tbh , haven’t found an option yet to turn it off otherwise .. it is abit of a pain I Spose but it’s not too bad to do really and if you leave I decent length of wire it can easily be reconnected if need be at a later date 👍

@Maximus_Meridius

3 жыл бұрын

@@diydaly yes Audi is much better but when you want to apgrade on laguna2 such as a cruise control it is much easy you dont need coding or doo such things just put on and job is done.. Speddometar on a4 you must go to ECU and confitm a cod on laguna just put on and work instantly no need to go in ECU modul ..My brother drive WV Golf VI he have a problem whit EGR valve ..he get a new one EGR Valve Piierburg germany he put on erase Service cod light and EGR still dont work ... he ned to put a new cod on ECU 4 new EGR an than it is work imagin that ...Audi VW it is the same gropu ...

@diydaly

3 жыл бұрын

👍 yeah I Spose that is a downside to the Audi , much more reliable though 😁👌

Hi DIYDaly, When changing the steering column control module, because mine was not compatible with cruise control from the factory, people talks about fitting a wire to the ECU? So i can't just simply change the steering column control module and follow the steps you do in this video, without adding new wires and such? Thank you in advance for your help

@diydaly

3 жыл бұрын

Hi Gustav is yours a b5 or b6..? If so you will need to run the wire to the ECU , I could find out what pin for you if need be.. if you have a B7 then then you just need the correct steering module

@gustavbork4877

3 жыл бұрын

@@diydaly Mine is a A4 b6 from 2002. You describe a wire as "the wire"? What wire is that and what does it do?

@diydaly

3 жыл бұрын

It’s the cambus wiring between the ecu’s, tells steering module the speed clutch position etc. It needs running between them

@gustavbork4877

3 жыл бұрын

@@diydaly Alright that is good to know! Where can I then find information on how to wire up this wiring to the ecu from the cruise control?

@diydaly

3 жыл бұрын

@@gustavbork4877 pretty much everything you need to know is on the rosstech wiki site .. I’ll attach a link 👍 wiki.ross-tech.com/wiki/index.php/Cruise_Control_Retrofitting_(8E)

My cruise control is installed and coded fine but it doesn’t register at the engine ecu and doesn’t register on the dash. Any ideas ?

@diydaly

3 жыл бұрын

Hi kris has it been coded in the engine ecu and the steering control module? I presume u mean the green light doesn’t come on the dash when you operate cruise? Thanks

Hi, Are you able to fit cruise control to my Audi A4 B8 2009 AVANT, 1.8 petrol, 160hp, automatic? I bought this car and has no cruise control? Thanks, Florin

@diydaly

2 жыл бұрын

Thanks for the comment , I’m afraid not currently doing any work outside my day job due to other commitments .. it can be done though mate 👍

Hi, I don’t suppose you know how to code genuine bi-xenon lights for this car? Using the snap on tool. Andy

@diydaly

2 жыл бұрын

Sorry mate I’m afraid not! A lad I know wants his Doing though.. if it ever comes up as a job I’ll do a video on it 👍

@4432andy

2 жыл бұрын

Thanks for the reply, I may have to get a garage to do it with VCDS as the lamps are already fitted along with the Kufa wiring loom. Your videos are definitely helpful though 👍🏼

@diydaly

2 жыл бұрын

@@4432andy thanks mate , I own a B7 and look after a few so should be plenty more vids to follow 👍

Do you need a safety clutch switch for cruise control? @DIYDaly

@diydaly

2 жыл бұрын

no it should already have one mate 👍

@user-xc9cz8qp8k

2 жыл бұрын

@@diydaly oh ok, I was also checking the steering control module and it ended with an S so it is lowline do you have any idea if I could fit midline and if I need to code it via vcds?

@diydaly

2 жыл бұрын

Hmm I’m not too sure tbh, will do some digging and let you know mate 👍

Hi! After I activated DIS option in vcds, I got wash fluid error. How can this be resolved? Is it complicated to add the wash fluid sensor?

@diydaly

3 жыл бұрын

Hi yes this is a common issue , you can eather retro fit a washer fluid level sensor or do what I did and earth out one of the wires from the back of the dashboard and you won’t get the warning anymore.. if you watch through the video at around the 17min 30 point I run through the procedure 👌👍

@CrazyMan-qs4so

3 жыл бұрын

@@diydaly Thank you so much!

@diydaly

3 жыл бұрын

No probs mate , glad to help 👍

I have a 2006 B7 3.0tdi and it has had cruise retro fitted, but on dis it just has distance to empty. What would I need to get the full dis working? Would it be just a replacement wiper stalk with the onboard computer button on end and coding with vcds? Thanks 😊

@diydaly

3 жыл бұрын

Yes mate you just need the stalk and then can update / change the coding to turn full DIS option on 👍

@mgs090110

3 жыл бұрын

@@diydaly thank you mate 👍

@diydaly

3 жыл бұрын

👌👍

@mgs090110

3 жыл бұрын

@@diydaly where are you based? Also I have a sensor on my windscreen wiper fluid bottle but I get no warning on dash when empty is this likely to be related to the cruise install?

@diydaly

3 жыл бұрын

I'm based in Louth Lincolnshire, yeah it could be to do with the install I needed to earth one of the wires out the back of the dash to take the washer bottle warning off when I did mine. unless you have a faulty sensor

Great video! I'm planning to do this on my B7 soon. I have VCDS and should be no problem. Only thing I'm a bit confused by is a comment on the Ross-Tech wiki regarding a wire that needs to be run from the steering wheel to the ECU? Quote: "Wire T16a/5 from steering column control module to engine control module (see wiring diagram specific your particular car/engine)" I've searched around for other descriptions of this and find nothing. Might be just for some engines/ECUs? I have an 1,9 TDI BKE engine. Do you have any experience with this?

@diydaly

3 жыл бұрын

Thanks for your comment 👌 . If yours is the B7 the wire should be pre installed so you won’t need to worry about it , that’s normally related to the B6’s 👍

@Shyveian

3 жыл бұрын

DIYDaly Hi, thanks for your reply. That’s what I figured 👍🏻 great channel, keep producing content like this and you will grow fast 👍🏻

@diydaly

3 жыл бұрын

No problem 👍 thanks for the inspiration 👌👌🤞

Hi ,anyone know what's the code a4 b8 ? Thank you!

@diydaly

2 жыл бұрын

Sorry not sure mate, hopefully some else can help 👍

Hi i wont you help me i have one Audi A4 B6 and ai wont to instal all option my car no have noting what i have to do

@ksmetce8035

3 ай бұрын

If you put your cruise and it's not working, then you need to change the control module with new one who has pin inside him. Yours doesn't have.

Can’t find the codes for my vehicle 2007 b7 2.0tdi BRE avant with 3 spoke steering wheel and controls

@diydaly

2 жыл бұрын

have you been on the rosstech wiki site mate

@juniorchapman3805

Жыл бұрын

@@diydaly I have the same one and the rosstech site doesn’t have the codes do you know what they are or how I could find them

@diydaly

Жыл бұрын

@@juniorchapman3805 afraid I’m not really sure now mate , it was a long time ago i did this one

Hi Dan can you please do exactly the same job for me please ?? If so how can I get you ?

@diydaly

3 жыл бұрын

Hi Barry thanks for the comment , much appreciated.. I’m afraid I’m currently employed full time so haven’t had the time to fit any other jobs in at the moment.. I’ll will get in touch if I get chance ... thanks 👍

I’m having issues with the wiper stalk, I swapped the old stock but kept the rest stalks the same but I can’t access the cluster menu? Can you help me out ?

@diydaly

3 жыл бұрын

Thanks for the comment.. did u swop just the actual wiper stalk? And just to confirm.. you did have full DIS options before but had a fault stalk I presume?

@dego8032

3 жыл бұрын

@@diydaly yes just the actual wiper stalk, & correct I had full DIS before faulty stalk.

@dego8032

3 жыл бұрын

What can I do

@diydaly

3 жыл бұрын

I’ve not had any similar issues tbf.. the only thing I can think to try first would be to do a full code scan and make sure it hasn’t logged any faults in any of the other control modules that are disabling the function.. if so clear the fault codes and retry

@diydaly

3 жыл бұрын

Just replied mate 👍

why did you cut the cable in pin 1

@diydaly

2 жыл бұрын

If you don’t cut the wire and earth it, it will have the screen washer fluid level low light on the dash

@fouad563

2 жыл бұрын

@@diydaly i Don t have the screen washer fluid level low light on the dash

@diydaly

2 жыл бұрын

@@fouad563 you may not need to do it then

@fouad563

2 жыл бұрын

@@diydaly But the Crisis Control Don t work

@diydaly

2 жыл бұрын

@@fouad563 have you done the coding via Vag com?